| /* | |
| * P5020/5010 Silicon/SoC Device Tree Source (post include) | |
| * | |
| * Copyright 2011 - 2015 Freescale Semiconductor Inc. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * * Neither the name of Freescale Semiconductor nor the | |
| * names of its contributors may be used to endorse or promote products | |
| * derived from this software without specific prior written permission. | |
| * | |
| * | |
| * ALTERNATIVELY, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") as published by the Free Software | |
| * Foundation, either version 2 of that License or (at your option) any | |
| * later version. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY | |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY | |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| &bman_fbpr { | |
| compatible = "fsl,bman-fbpr"; | |
| alloc-ranges = <0 0 0x10000 0>; | |
| }; | |
| &qman_fqd { | |
| compatible = "fsl,qman-fqd"; | |
| alloc-ranges = <0 0 0x10000 0>; | |
| }; | |
| &qman_pfdr { | |
| compatible = "fsl,qman-pfdr"; | |
| alloc-ranges = <0 0 0x10000 0>; | |
| }; | |
| &lbc { | |
| compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus"; | |
| interrupts = <25 2 0 0>; | |
| #address-cells = <2>; | |
| #size-cells = <1>; | |
| }; | |
| /* controller at 0x200000 */ | |
| &pci0 { | |
| compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; | |
| device_type = "pci"; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| bus-range = <0x0 0xff>; | |
| clock-frequency = <33333333>; | |
| interrupts = <16 2 1 15>; | |
| fsl,iommu-parent = <&pamu0>; | |
| fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ | |
| pcie@0 { | |
| reg = <0 0 0 0 0>; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| device_type = "pci"; | |
| interrupts = <16 2 1 15>; | |
| interrupt-map-mask = <0xf800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x0 */ | |
| 0000 0 0 1 &mpic 40 1 0 0 | |
| 0000 0 0 2 &mpic 1 1 0 0 | |
| 0000 0 0 3 &mpic 2 1 0 0 | |
| 0000 0 0 4 &mpic 3 1 0 0 | |
| >; | |
| }; | |
| }; | |
| /* controller at 0x201000 */ | |
| &pci1 { | |
| compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; | |
| device_type = "pci"; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| bus-range = <0 0xff>; | |
| clock-frequency = <33333333>; | |
| interrupts = <16 2 1 14>; | |
| fsl,iommu-parent = <&pamu0>; | |
| fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ | |
| pcie@0 { | |
| reg = <0 0 0 0 0>; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| device_type = "pci"; | |
| interrupts = <16 2 1 14>; | |
| interrupt-map-mask = <0xf800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x0 */ | |
| 0000 0 0 1 &mpic 41 1 0 0 | |
| 0000 0 0 2 &mpic 5 1 0 0 | |
| 0000 0 0 3 &mpic 6 1 0 0 | |
| 0000 0 0 4 &mpic 7 1 0 0 | |
| >; | |
| }; | |
| }; | |
| /* controller at 0x202000 */ | |
| &pci2 { | |
| compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; | |
| device_type = "pci"; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| bus-range = <0x0 0xff>; | |
| clock-frequency = <33333333>; | |
| interrupts = <16 2 1 13>; | |
| fsl,iommu-parent = <&pamu0>; | |
| fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ | |
| pcie@0 { | |
| reg = <0 0 0 0 0>; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| device_type = "pci"; | |
| interrupts = <16 2 1 13>; | |
| interrupt-map-mask = <0xf800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x0 */ | |
| 0000 0 0 1 &mpic 42 1 0 0 | |
| 0000 0 0 2 &mpic 9 1 0 0 | |
| 0000 0 0 3 &mpic 10 1 0 0 | |
| 0000 0 0 4 &mpic 11 1 0 0 | |
| >; | |
| }; | |
| }; | |
| /* controller at 0x203000 */ | |
| &pci3 { | |
| compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; | |
| device_type = "pci"; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| bus-range = <0x0 0xff>; | |
| clock-frequency = <33333333>; | |
| interrupts = <16 2 1 12>; | |
| fsl,iommu-parent = <&pamu0>; | |
| fsl,liodn-reg = <&guts 0x50c>; /* PEX4LIODNR */ | |
| pcie@0 { | |
| reg = <0 0 0 0 0>; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| device_type = "pci"; | |
| interrupts = <16 2 1 12>; | |
| interrupt-map-mask = <0xf800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x0 */ | |
| 0000 0 0 1 &mpic 43 1 0 0 | |
| 0000 0 0 2 &mpic 0 1 0 0 | |
| 0000 0 0 3 &mpic 4 1 0 0 | |
| 0000 0 0 4 &mpic 8 1 0 0 | |
| >; | |
| }; | |
| }; | |
| &rio { | |
| compatible = "fsl,srio"; | |
| interrupts = <16 2 1 11>; | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| fsl,iommu-parent = <&pamu0>; | |
| ranges; | |
| port1 { | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| cell-index = <1>; | |
| fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ | |
| }; | |
| port2 { | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| cell-index = <2>; | |
| fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ | |
| }; | |
| }; | |
| &dcsr { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "fsl,dcsr", "simple-bus"; | |
| dcsr-epu@0 { | |
| compatible = "fsl,p5020-dcsr-epu", "fsl,dcsr-epu"; | |
| interrupts = <52 2 0 0 | |
| 84 2 0 0 | |
| 85 2 0 0>; | |
| reg = <0x0 0x1000>; | |
| }; | |
| dcsr-npc { | |
| compatible = "fsl,dcsr-npc"; | |
| reg = <0x1000 0x1000 0x1000000 0x8000>; | |
| }; | |
| dcsr-nxc@2000 { | |
| compatible = "fsl,dcsr-nxc"; | |
| reg = <0x2000 0x1000>; | |
| }; | |
| dcsr-corenet { | |
| compatible = "fsl,dcsr-corenet"; | |
| reg = <0x8000 0x1000 0xB0000 0x1000>; | |
| }; | |
| dcsr-dpaa@9000 { | |
| compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa"; | |
| reg = <0x9000 0x1000>; | |
| }; | |
| dcsr-ocn@11000 { | |
| compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn"; | |
| reg = <0x11000 0x1000>; | |
| }; | |
| dcsr-ddr@12000 { | |
| compatible = "fsl,dcsr-ddr"; | |
| dev-handle = <&ddr1>; | |
| reg = <0x12000 0x1000>; | |
| }; | |
| dcsr-ddr@13000 { | |
| compatible = "fsl,dcsr-ddr"; | |
| dev-handle = <&ddr2>; | |
| reg = <0x13000 0x1000>; | |
| }; | |
| dcsr-nal@18000 { | |
| compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal"; | |
| reg = <0x18000 0x1000>; | |
| }; | |
| dcsr-rcpm@22000 { | |
| compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm"; | |
| reg = <0x22000 0x1000>; | |
| }; | |
| dcsr-cpu-sb-proxy@40000 { | |
| compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; | |
| cpu-handle = <&cpu0>; | |
| reg = <0x40000 0x1000>; | |
| }; | |
| dcsr-cpu-sb-proxy@41000 { | |
| compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; | |
| cpu-handle = <&cpu1>; | |
| reg = <0x41000 0x1000>; | |
| }; | |
| }; | |
| /include/ "qoriq-bman1-portals.dtsi" | |
| /include/ "qoriq-qman1-portals.dtsi" | |
| &soc { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| device_type = "soc"; | |
| compatible = "simple-bus"; | |
| soc-sram-error { | |
| compatible = "fsl,soc-sram-error"; | |
| interrupts = <16 2 1 29>; | |
| }; | |
| corenet-law@0 { | |
| compatible = "fsl,corenet-law"; | |
| reg = <0x0 0x1000>; | |
| fsl,num-laws = <32>; | |
| }; | |
| ddr1: memory-controller@8000 { | |
| compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; | |
| reg = <0x8000 0x1000>; | |
| interrupts = <16 2 1 23>; | |
| }; | |
| ddr2: memory-controller@9000 { | |
| compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller"; | |
| reg = <0x9000 0x1000>; | |
| interrupts = <16 2 1 22>; | |
| }; | |
| cpc: l3-cache-controller@10000 { | |
| compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; | |
| reg = <0x10000 0x1000 | |
| 0x11000 0x1000>; | |
| interrupts = <16 2 1 27 | |
| 16 2 1 26>; | |
| }; | |
| corenet-cf@18000 { | |
| compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; | |
| reg = <0x18000 0x1000>; | |
| interrupts = <16 2 1 31>; | |
| fsl,ccf-num-csdids = <32>; | |
| fsl,ccf-num-snoopids = <32>; | |
| }; | |
| iommu@20000 { | |
| compatible = "fsl,pamu-v1.0", "fsl,pamu"; | |
| reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ | |
| ranges = <0 0x20000 0x4000>; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| interrupts = < | |
| 24 2 0 0 | |
| 16 2 1 30>; | |
| fsl,portid-mapping = <0x3c000000>; | |
| pamu0: pamu@0 { | |
| reg = <0 0x1000>; | |
| fsl,primary-cache-geometry = <32 1>; | |
| fsl,secondary-cache-geometry = <128 2>; | |
| }; | |
| pamu1: pamu@1000 { | |
| reg = <0x1000 0x1000>; | |
| fsl,primary-cache-geometry = <32 1>; | |
| fsl,secondary-cache-geometry = <128 2>; | |
| }; | |
| pamu2: pamu@2000 { | |
| reg = <0x2000 0x1000>; | |
| fsl,primary-cache-geometry = <32 1>; | |
| fsl,secondary-cache-geometry = <128 2>; | |
| }; | |
| pamu3: pamu@3000 { | |
| reg = <0x3000 0x1000>; | |
| fsl,primary-cache-geometry = <32 1>; | |
| fsl,secondary-cache-geometry = <128 2>; | |
| }; | |
| }; | |
| /include/ "qoriq-mpic.dtsi" | |
| guts: global-utilities@e0000 { | |
| compatible = "fsl,qoriq-device-config-1.0"; | |
| reg = <0xe0000 0xe00>; | |
| fsl,has-rstcr; | |
| #sleep-cells = <1>; | |
| fsl,liodn-bits = <12>; | |
| }; | |
| pins: global-utilities@e0e00 { | |
| compatible = "fsl,qoriq-pin-control-1.0"; | |
| reg = <0xe0e00 0x200>; | |
| #sleep-cells = <2>; | |
| }; | |
| /include/ "qoriq-clockgen1.dtsi" | |
| global-utilities@e1000 { | |
| compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; | |
| }; | |
| rcpm: global-utilities@e2000 { | |
| compatible = "fsl,qoriq-rcpm-1.0"; | |
| reg = <0xe2000 0x1000>; | |
| #sleep-cells = <1>; | |
| }; | |
| sfp: sfp@e8000 { | |
| compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0"; | |
| reg = <0xe8000 0x1000>; | |
| }; | |
| serdes: serdes@ea000 { | |
| compatible = "fsl,p5020-serdes"; | |
| reg = <0xea000 0x1000>; | |
| }; | |
| /include/ "qoriq-dma-0.dtsi" | |
| dma@100300 { | |
| fsl,iommu-parent = <&pamu0>; | |
| fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ | |
| }; | |
| /include/ "qoriq-dma-1.dtsi" | |
| dma@101300 { | |
| fsl,iommu-parent = <&pamu0>; | |
| fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ | |
| }; | |
| /include/ "qoriq-espi-0.dtsi" | |
| spi@110000 { | |
| fsl,espi-num-chipselects = <4>; | |
| }; | |
| /include/ "qoriq-esdhc-0.dtsi" | |
| sdhc@114000 { | |
| compatible = "fsl,p5020-esdhc", "fsl,esdhc"; | |
| fsl,iommu-parent = <&pamu1>; | |
| fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ | |
| sdhci,auto-cmd12; | |
| }; | |
| /include/ "qoriq-i2c-0.dtsi" | |
| /include/ "qoriq-i2c-1.dtsi" | |
| /include/ "qoriq-duart-0.dtsi" | |
| /include/ "qoriq-duart-1.dtsi" | |
| /include/ "qoriq-gpio-0.dtsi" | |
| /include/ "qoriq-usb2-mph-0.dtsi" | |
| usb0: usb@210000 { | |
| compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; | |
| fsl,iommu-parent = <&pamu1>; | |
| fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ | |
| phy_type = "utmi"; | |
| port0; | |
| }; | |
| /include/ "qoriq-usb2-dr-0.dtsi" | |
| usb1: usb@211000 { | |
| compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; | |
| fsl,iommu-parent = <&pamu1>; | |
| fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ | |
| dr_mode = "host"; | |
| phy_type = "utmi"; | |
| }; | |
| /include/ "qoriq-sata2-0.dtsi" | |
| sata@220000 { | |
| fsl,iommu-parent = <&pamu1>; | |
| fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ | |
| }; | |
| /include/ "qoriq-sata2-1.dtsi" | |
| sata@221000 { | |
| fsl,iommu-parent = <&pamu1>; | |
| fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ | |
| }; | |
| /include/ "qoriq-sec4.2-0.dtsi" | |
| crypto@300000 { | |
| fsl,iommu-parent = <&pamu1>; | |
| }; | |
| /include/ "qoriq-qman1.dtsi" | |
| /include/ "qoriq-bman1.dtsi" | |
| /include/ "qoriq-raid1.0-0.dtsi" | |
| raideng@320000 { | |
| fsl,iommu-parent = <&pamu1>; | |
| }; | |
| /include/ "qoriq-fman-0.dtsi" | |
| /include/ "qoriq-fman-0-1g-0.dtsi" | |
| /include/ "qoriq-fman-0-1g-1.dtsi" | |
| /include/ "qoriq-fman-0-1g-2.dtsi" | |
| /include/ "qoriq-fman-0-1g-3.dtsi" | |
| /include/ "qoriq-fman-0-1g-4.dtsi" | |
| /include/ "qoriq-fman-0-10g-0.dtsi" | |
| fman@400000 { | |
| enet0: ethernet@e0000 { | |
| }; | |
| enet1: ethernet@e2000 { | |
| }; | |
| enet2: ethernet@e4000 { | |
| }; | |
| enet3: ethernet@e6000 { | |
| }; | |
| enet4: ethernet@e8000 { | |
| }; | |
| enet5: ethernet@f0000 { | |
| }; | |
| }; | |
| }; |