| /* | |
| * P5040 Silicon/SoC Device Tree Source (pre include) | |
| * | |
| * Copyright 2012 - 2015 Freescale Semiconductor Inc. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * * Neither the name of Freescale Semiconductor nor the | |
| * names of its contributors may be used to endorse or promote products | |
| * derived from this software without specific prior written permission. | |
| * | |
| * | |
| * ALTERNATIVELY, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") as published by the Free Software | |
| * Foundation, either version 2 of that License or (at your option) any | |
| * later version. | |
| * | |
| * This software is provided by Freescale Semiconductor "as is" and any | |
| * express or implied warranties, including, but not limited to, the implied | |
| * warranties of merchantability and fitness for a particular purpose are | |
| * disclaimed. In no event shall Freescale Semiconductor be liable for any | |
| * direct, indirect, incidental, special, exemplary, or consequential damages | |
| * (including, but not limited to, procurement of substitute goods or services; | |
| * loss of use, data, or profits; or business interruption) however caused and | |
| * on any theory of liability, whether in contract, strict liability, or tort | |
| * (including negligence or otherwise) arising in any way out of the use of this | |
| * software, even if advised of the possibility of such damage. | |
| */ | |
| /dts-v1/; | |
| /include/ "e5500_power_isa.dtsi" | |
| / { | |
| compatible = "fsl,P5040"; | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| interrupt-parent = <&mpic>; | |
| aliases { | |
| ccsr = &soc; | |
| dcsr = &dcsr; | |
| serial0 = &serial0; | |
| serial1 = &serial1; | |
| serial2 = &serial2; | |
| serial3 = &serial3; | |
| pci0 = &pci0; | |
| pci1 = &pci1; | |
| pci2 = &pci2; | |
| usb0 = &usb0; | |
| usb1 = &usb1; | |
| dma0 = &dma0; | |
| dma1 = &dma1; | |
| sdhc = &sdhc; | |
| msi0 = &msi0; | |
| msi1 = &msi1; | |
| msi2 = &msi2; | |
| crypto = &crypto; | |
| sec_jr0 = &sec_jr0; | |
| sec_jr1 = &sec_jr1; | |
| sec_jr2 = &sec_jr2; | |
| sec_jr3 = &sec_jr3; | |
| rtic_a = &rtic_a; | |
| rtic_b = &rtic_b; | |
| rtic_c = &rtic_c; | |
| rtic_d = &rtic_d; | |
| sec_mon = &sec_mon; | |
| raideng = &raideng; | |
| raideng_jr0 = &raideng_jr0; | |
| raideng_jr1 = &raideng_jr1; | |
| raideng_jr2 = &raideng_jr2; | |
| raideng_jr3 = &raideng_jr3; | |
| fman0 = &fman0; | |
| fman1 = &fman1; | |
| ethernet0 = &enet0; | |
| ethernet1 = &enet1; | |
| ethernet2 = &enet2; | |
| ethernet3 = &enet3; | |
| ethernet4 = &enet4; | |
| ethernet5 = &enet5; | |
| ethernet6 = &enet6; | |
| ethernet7 = &enet7; | |
| ethernet8 = &enet8; | |
| ethernet9 = &enet9; | |
| ethernet10 = &enet10; | |
| ethernet11 = &enet11; | |
| }; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| cpu0: PowerPC,e5500@0 { | |
| device_type = "cpu"; | |
| reg = <0>; | |
| clocks = <&mux0>; | |
| next-level-cache = <&L2_0>; | |
| fsl,portid-mapping = <0x80000000>; | |
| L2_0: l2-cache { | |
| next-level-cache = <&cpc>; | |
| }; | |
| }; | |
| cpu1: PowerPC,e5500@1 { | |
| device_type = "cpu"; | |
| reg = <1>; | |
| clocks = <&mux1>; | |
| next-level-cache = <&L2_1>; | |
| fsl,portid-mapping = <0x40000000>; | |
| L2_1: l2-cache { | |
| next-level-cache = <&cpc>; | |
| }; | |
| }; | |
| cpu2: PowerPC,e5500@2 { | |
| device_type = "cpu"; | |
| reg = <2>; | |
| clocks = <&mux2>; | |
| next-level-cache = <&L2_2>; | |
| fsl,portid-mapping = <0x20000000>; | |
| L2_2: l2-cache { | |
| next-level-cache = <&cpc>; | |
| }; | |
| }; | |
| cpu3: PowerPC,e5500@3 { | |
| device_type = "cpu"; | |
| reg = <3>; | |
| clocks = <&mux3>; | |
| next-level-cache = <&L2_3>; | |
| fsl,portid-mapping = <0x10000000>; | |
| L2_3: l2-cache { | |
| next-level-cache = <&cpc>; | |
| }; | |
| }; | |
| }; | |
| }; |