| /* | |
| * T2081 Silicon/SoC Device Tree Source (post include) | |
| * | |
| * Copyright 2013 - 2014 Freescale Semiconductor Inc. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * * Neither the name of Freescale Semiconductor nor the | |
| * names of its contributors may be used to endorse or promote products | |
| * derived from this software without specific prior written permission. | |
| * | |
| * | |
| * ALTERNATIVELY, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") as published by the Free Software | |
| * Foundation, either version 2 of that License or (at your option) any | |
| * later version. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY | |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY | |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| &bman_fbpr { | |
| compatible = "fsl,bman-fbpr"; | |
| alloc-ranges = <0 0 0x10000 0>; | |
| }; | |
| &qman_fqd { | |
| compatible = "fsl,qman-fqd"; | |
| alloc-ranges = <0 0 0x10000 0>; | |
| }; | |
| &qman_pfdr { | |
| compatible = "fsl,qman-pfdr"; | |
| alloc-ranges = <0 0 0x10000 0>; | |
| }; | |
| &ifc { | |
| #address-cells = <2>; | |
| #size-cells = <1>; | |
| compatible = "fsl,ifc", "simple-bus"; | |
| interrupts = <25 2 0 0>; | |
| }; | |
| /* controller at 0x240000 */ | |
| &pci0 { | |
| compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; | |
| device_type = "pci"; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| bus-range = <0x0 0xff>; | |
| interrupts = <20 2 0 0>; | |
| fsl,iommu-parent = <&pamu0>; | |
| pcie@0 { | |
| reg = <0 0 0 0 0>; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| device_type = "pci"; | |
| interrupts = <20 2 0 0>; | |
| interrupt-map-mask = <0xf800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x0 */ | |
| 0000 0 0 1 &mpic 40 1 0 0 | |
| 0000 0 0 2 &mpic 1 1 0 0 | |
| 0000 0 0 3 &mpic 2 1 0 0 | |
| 0000 0 0 4 &mpic 3 1 0 0 | |
| >; | |
| }; | |
| }; | |
| /* controller at 0x250000 */ | |
| &pci1 { | |
| compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; | |
| device_type = "pci"; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| bus-range = <0 0xff>; | |
| interrupts = <21 2 0 0>; | |
| fsl,iommu-parent = <&pamu0>; | |
| pcie@0 { | |
| reg = <0 0 0 0 0>; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| device_type = "pci"; | |
| interrupts = <21 2 0 0>; | |
| interrupt-map-mask = <0xf800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x0 */ | |
| 0000 0 0 1 &mpic 41 1 0 0 | |
| 0000 0 0 2 &mpic 5 1 0 0 | |
| 0000 0 0 3 &mpic 6 1 0 0 | |
| 0000 0 0 4 &mpic 7 1 0 0 | |
| >; | |
| }; | |
| }; | |
| /* controller at 0x260000 */ | |
| &pci2 { | |
| compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; | |
| device_type = "pci"; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| bus-range = <0x0 0xff>; | |
| interrupts = <22 2 0 0>; | |
| fsl,iommu-parent = <&pamu0>; | |
| pcie@0 { | |
| reg = <0 0 0 0 0>; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| device_type = "pci"; | |
| interrupts = <22 2 0 0>; | |
| interrupt-map-mask = <0xf800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x0 */ | |
| 0000 0 0 1 &mpic 42 1 0 0 | |
| 0000 0 0 2 &mpic 9 1 0 0 | |
| 0000 0 0 3 &mpic 10 1 0 0 | |
| 0000 0 0 4 &mpic 11 1 0 0 | |
| >; | |
| }; | |
| }; | |
| /* controller at 0x270000 */ | |
| &pci3 { | |
| compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; | |
| device_type = "pci"; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| bus-range = <0x0 0xff>; | |
| interrupts = <23 2 0 0>; | |
| fsl,iommu-parent = <&pamu0>; | |
| pcie@0 { | |
| reg = <0 0 0 0 0>; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| device_type = "pci"; | |
| interrupts = <23 2 0 0>; | |
| interrupt-map-mask = <0xf800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x0 */ | |
| 0000 0 0 1 &mpic 43 1 0 0 | |
| 0000 0 0 2 &mpic 0 1 0 0 | |
| 0000 0 0 3 &mpic 4 1 0 0 | |
| 0000 0 0 4 &mpic 8 1 0 0 | |
| >; | |
| }; | |
| }; | |
| &dcsr { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "fsl,dcsr", "simple-bus"; | |
| dcsr-epu@0 { | |
| compatible = "fsl,t2080-dcsr-epu", "fsl,dcsr-epu"; | |
| interrupts = <52 2 0 0 | |
| 84 2 0 0 | |
| 85 2 0 0 | |
| 94 2 0 0 | |
| 95 2 0 0>; | |
| reg = <0x0 0x1000>; | |
| }; | |
| dcsr-npc { | |
| compatible = "fsl,t2080-dcsr-cnpc", "fsl,dcsr-cnpc"; | |
| reg = <0x1000 0x1000 0x1002000 0x10000>; | |
| }; | |
| dcsr-nxc@2000 { | |
| compatible = "fsl,dcsr-nxc"; | |
| reg = <0x2000 0x1000>; | |
| }; | |
| dcsr-corenet { | |
| compatible = "fsl,dcsr-corenet"; | |
| reg = <0x8000 0x1000 0x1A000 0x1000>; | |
| }; | |
| dcsr-ocn@11000 { | |
| compatible = "fsl,t2080-dcsr-ocn", "fsl,dcsr-ocn"; | |
| reg = <0x11000 0x1000>; | |
| }; | |
| dcsr-ddr@12000 { | |
| compatible = "fsl,dcsr-ddr"; | |
| dev-handle = <&ddr1>; | |
| reg = <0x12000 0x1000>; | |
| }; | |
| dcsr-nal@18000 { | |
| compatible = "fsl,t2080-dcsr-nal", "fsl,dcsr-nal"; | |
| reg = <0x18000 0x1000>; | |
| }; | |
| dcsr-rcpm@22000 { | |
| compatible = "fsl,t2080-dcsr-rcpm", "fsl,dcsr-rcpm"; | |
| reg = <0x22000 0x1000>; | |
| }; | |
| dcsr-snpc@30000 { | |
| compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; | |
| reg = <0x30000 0x1000 0x1022000 0x10000>; | |
| }; | |
| dcsr-snpc@31000 { | |
| compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; | |
| reg = <0x31000 0x1000 0x1042000 0x10000>; | |
| }; | |
| dcsr-snpc@32000 { | |
| compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; | |
| reg = <0x32000 0x1000 0x1062000 0x10000>; | |
| }; | |
| dcsr-cpu-sb-proxy@100000 { | |
| compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; | |
| cpu-handle = <&cpu0>; | |
| reg = <0x100000 0x1000 0x101000 0x1000>; | |
| }; | |
| dcsr-cpu-sb-proxy@108000 { | |
| compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; | |
| cpu-handle = <&cpu1>; | |
| reg = <0x108000 0x1000 0x109000 0x1000>; | |
| }; | |
| dcsr-cpu-sb-proxy@110000 { | |
| compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; | |
| cpu-handle = <&cpu2>; | |
| reg = <0x110000 0x1000 0x111000 0x1000>; | |
| }; | |
| dcsr-cpu-sb-proxy@118000 { | |
| compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; | |
| cpu-handle = <&cpu3>; | |
| reg = <0x118000 0x1000 0x119000 0x1000>; | |
| }; | |
| }; | |
| &bportals { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x1>; | |
| compatible = "simple-bus"; | |
| bman-portal@0 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x0 0x4000>, <0x1000000 0x1000>; | |
| interrupts = <105 2 0 0>; | |
| }; | |
| bman-portal@4000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x4000 0x4000>, <0x1001000 0x1000>; | |
| interrupts = <107 2 0 0>; | |
| }; | |
| bman-portal@8000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x8000 0x4000>, <0x1002000 0x1000>; | |
| interrupts = <109 2 0 0>; | |
| }; | |
| bman-portal@c000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0xc000 0x4000>, <0x1003000 0x1000>; | |
| interrupts = <111 2 0 0>; | |
| }; | |
| bman-portal@10000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x10000 0x4000>, <0x1004000 0x1000>; | |
| interrupts = <113 2 0 0>; | |
| }; | |
| bman-portal@14000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x14000 0x4000>, <0x1005000 0x1000>; | |
| interrupts = <115 2 0 0>; | |
| }; | |
| bman-portal@18000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x18000 0x4000>, <0x1006000 0x1000>; | |
| interrupts = <117 2 0 0>; | |
| }; | |
| bman-portal@1c000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x1c000 0x4000>, <0x1007000 0x1000>; | |
| interrupts = <119 2 0 0>; | |
| }; | |
| bman-portal@20000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x20000 0x4000>, <0x1008000 0x1000>; | |
| interrupts = <121 2 0 0>; | |
| }; | |
| bman-portal@24000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x24000 0x4000>, <0x1009000 0x1000>; | |
| interrupts = <123 2 0 0>; | |
| }; | |
| bman-portal@28000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x28000 0x4000>, <0x100a000 0x1000>; | |
| interrupts = <125 2 0 0>; | |
| }; | |
| bman-portal@2c000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x2c000 0x4000>, <0x100b000 0x1000>; | |
| interrupts = <127 2 0 0>; | |
| }; | |
| bman-portal@30000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x30000 0x4000>, <0x100c000 0x1000>; | |
| interrupts = <129 2 0 0>; | |
| }; | |
| bman-portal@34000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x34000 0x4000>, <0x100d000 0x1000>; | |
| interrupts = <131 2 0 0>; | |
| }; | |
| bman-portal@38000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x38000 0x4000>, <0x100e000 0x1000>; | |
| interrupts = <133 2 0 0>; | |
| }; | |
| bman-portal@3c000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x3c000 0x4000>, <0x100f000 0x1000>; | |
| interrupts = <135 2 0 0>; | |
| }; | |
| bman-portal@40000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x40000 0x4000>, <0x1010000 0x1000>; | |
| interrupts = <137 2 0 0>; | |
| }; | |
| bman-portal@44000 { | |
| compatible = "fsl,bman-portal"; | |
| reg = <0x44000 0x4000>, <0x1011000 0x1000>; | |
| interrupts = <139 2 0 0>; | |
| }; | |
| }; | |
| &qportals { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x1>; | |
| compatible = "simple-bus"; | |
| qportal0: qman-portal@0 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x0 0x4000>, <0x1000000 0x1000>; | |
| interrupts = <104 0x2 0 0>; | |
| cell-index = <0x0>; | |
| }; | |
| qportal1: qman-portal@4000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x4000 0x4000>, <0x1001000 0x1000>; | |
| interrupts = <106 0x2 0 0>; | |
| cell-index = <0x1>; | |
| }; | |
| qportal2: qman-portal@8000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x8000 0x4000>, <0x1002000 0x1000>; | |
| interrupts = <108 0x2 0 0>; | |
| cell-index = <0x2>; | |
| }; | |
| qportal3: qman-portal@c000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0xc000 0x4000>, <0x1003000 0x1000>; | |
| interrupts = <110 0x2 0 0>; | |
| cell-index = <0x3>; | |
| }; | |
| qportal4: qman-portal@10000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x10000 0x4000>, <0x1004000 0x1000>; | |
| interrupts = <112 0x2 0 0>; | |
| cell-index = <0x4>; | |
| }; | |
| qportal5: qman-portal@14000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x14000 0x4000>, <0x1005000 0x1000>; | |
| interrupts = <114 0x2 0 0>; | |
| cell-index = <0x5>; | |
| }; | |
| qportal6: qman-portal@18000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x18000 0x4000>, <0x1006000 0x1000>; | |
| interrupts = <116 0x2 0 0>; | |
| cell-index = <0x6>; | |
| }; | |
| qportal7: qman-portal@1c000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x1c000 0x4000>, <0x1007000 0x1000>; | |
| interrupts = <118 0x2 0 0>; | |
| cell-index = <0x7>; | |
| }; | |
| qportal8: qman-portal@20000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x20000 0x4000>, <0x1008000 0x1000>; | |
| interrupts = <120 0x2 0 0>; | |
| cell-index = <0x8>; | |
| }; | |
| qportal9: qman-portal@24000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x24000 0x4000>, <0x1009000 0x1000>; | |
| interrupts = <122 0x2 0 0>; | |
| cell-index = <0x9>; | |
| }; | |
| qportal10: qman-portal@28000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x28000 0x4000>, <0x100a000 0x1000>; | |
| interrupts = <124 0x2 0 0>; | |
| cell-index = <0xa>; | |
| }; | |
| qportal11: qman-portal@2c000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x2c000 0x4000>, <0x100b000 0x1000>; | |
| interrupts = <126 0x2 0 0>; | |
| cell-index = <0xb>; | |
| }; | |
| qportal12: qman-portal@30000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x30000 0x4000>, <0x100c000 0x1000>; | |
| interrupts = <128 0x2 0 0>; | |
| cell-index = <0xc>; | |
| }; | |
| qportal13: qman-portal@34000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x34000 0x4000>, <0x100d000 0x1000>; | |
| interrupts = <130 0x2 0 0>; | |
| cell-index = <0xd>; | |
| }; | |
| qportal14: qman-portal@38000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x38000 0x4000>, <0x100e000 0x1000>; | |
| interrupts = <132 0x2 0 0>; | |
| cell-index = <0xe>; | |
| }; | |
| qportal15: qman-portal@3c000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x3c000 0x4000>, <0x100f000 0x1000>; | |
| interrupts = <134 0x2 0 0>; | |
| cell-index = <0xf>; | |
| }; | |
| qportal16: qman-portal@40000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x40000 0x4000>, <0x1010000 0x1000>; | |
| interrupts = <136 0x2 0 0>; | |
| cell-index = <0x10>; | |
| }; | |
| qportal17: qman-portal@44000 { | |
| compatible = "fsl,qman-portal"; | |
| reg = <0x44000 0x4000>, <0x1011000 0x1000>; | |
| interrupts = <138 0x2 0 0>; | |
| cell-index = <0x11>; | |
| }; | |
| }; | |
| &soc { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| device_type = "soc"; | |
| compatible = "simple-bus"; | |
| soc-sram-error { | |
| compatible = "fsl,soc-sram-error"; | |
| interrupts = <16 2 1 29>; | |
| }; | |
| corenet-law@0 { | |
| compatible = "fsl,corenet-law"; | |
| reg = <0x0 0x1000>; | |
| fsl,num-laws = <32>; | |
| }; | |
| ddr1: memory-controller@8000 { | |
| compatible = "fsl,qoriq-memory-controller-v4.7", | |
| "fsl,qoriq-memory-controller"; | |
| reg = <0x8000 0x1000>; | |
| interrupts = <16 2 1 23>; | |
| }; | |
| cpc: l3-cache-controller@10000 { | |
| compatible = "fsl,t2080-l3-cache-controller", "cache"; | |
| reg = <0x10000 0x1000 | |
| 0x11000 0x1000 | |
| 0x12000 0x1000>; | |
| interrupts = <16 2 1 27 | |
| 16 2 1 26 | |
| 16 2 1 25>; | |
| }; | |
| corenet-cf@18000 { | |
| compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; | |
| reg = <0x18000 0x1000>; | |
| interrupts = <16 2 1 31>; | |
| fsl,ccf-num-csdids = <32>; | |
| fsl,ccf-num-snoopids = <32>; | |
| }; | |
| iommu@20000 { | |
| compatible = "fsl,pamu-v1.0", "fsl,pamu"; | |
| reg = <0x20000 0x3000>; | |
| fsl,portid-mapping = <0x8000>; | |
| ranges = <0 0x20000 0x3000>; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| interrupts = < | |
| 24 2 0 0 | |
| 16 2 1 30>; | |
| pamu0: pamu@0 { | |
| reg = <0 0x1000>; | |
| fsl,primary-cache-geometry = <32 1>; | |
| fsl,secondary-cache-geometry = <128 2>; | |
| }; | |
| pamu1: pamu@1000 { | |
| reg = <0x1000 0x1000>; | |
| fsl,primary-cache-geometry = <32 1>; | |
| fsl,secondary-cache-geometry = <128 2>; | |
| }; | |
| pamu2: pamu@2000 { | |
| reg = <0x2000 0x1000>; | |
| fsl,primary-cache-geometry = <32 1>; | |
| fsl,secondary-cache-geometry = <128 2>; | |
| }; | |
| }; | |
| /include/ "qoriq-mpic4.3.dtsi" | |
| guts: global-utilities@e0000 { | |
| compatible = "fsl,t2080-device-config", "fsl,qoriq-device-config-2.0"; | |
| reg = <0xe0000 0xe00>; | |
| fsl,has-rstcr; | |
| fsl,liodn-bits = <12>; | |
| }; | |
| /include/ "qoriq-clockgen2.dtsi" | |
| global-utilities@e1000 { | |
| compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0"; | |
| mux0: mux0@0 { | |
| #clock-cells = <0>; | |
| reg = <0x0 4>; | |
| compatible = "fsl,qoriq-core-mux-2.0"; | |
| clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, | |
| <&pll1 0>, <&pll1 1>, <&pll1 2>; | |
| clock-names = "pll0", "pll0-div2", "pll0-div4", | |
| "pll1", "pll1-div2", "pll1-div4"; | |
| clock-output-names = "cmux0"; | |
| }; | |
| mux1: mux1@20 { | |
| #clock-cells = <0>; | |
| reg = <0x20 4>; | |
| compatible = "fsl,qoriq-core-mux-2.0"; | |
| clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, | |
| <&pll1 0>, <&pll1 1>, <&pll1 2>; | |
| clock-names = "pll0", "pll0-div2", "pll0-div4", | |
| "pll1", "pll1-div2", "pll1-div4"; | |
| clock-output-names = "cmux1"; | |
| }; | |
| }; | |
| rcpm: global-utilities@e2000 { | |
| compatible = "fsl,t2080-rcpm", "fsl,qoriq-rcpm-2.0"; | |
| reg = <0xe2000 0x1000>; | |
| }; | |
| sfp: sfp@e8000 { | |
| compatible = "fsl,t2080-sfp"; | |
| reg = <0xe8000 0x1000>; | |
| }; | |
| serdes: serdes@ea000 { | |
| compatible = "fsl,t2080-serdes"; | |
| reg = <0xea000 0x4000>; | |
| }; | |
| /include/ "elo3-dma-0.dtsi" | |
| dma@100300 { | |
| fsl,iommu-parent = <&pamu0>; | |
| fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ | |
| }; | |
| /include/ "elo3-dma-1.dtsi" | |
| dma@101300 { | |
| fsl,iommu-parent = <&pamu0>; | |
| fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ | |
| }; | |
| /include/ "elo3-dma-2.dtsi" | |
| dma@102300 { | |
| fsl,iommu-parent = <&pamu0>; | |
| fsl,liodn-reg = <&guts 0x588>; /* DMA3LIODNR */ | |
| }; | |
| /include/ "qoriq-espi-0.dtsi" | |
| spi@110000 { | |
| fsl,espi-num-chipselects = <4>; | |
| }; | |
| /include/ "qoriq-esdhc-0.dtsi" | |
| sdhc@114000 { | |
| compatible = "fsl,t2080-esdhc", "fsl,esdhc"; | |
| fsl,iommu-parent = <&pamu1>; | |
| fsl,liodn-reg = <&guts 0x530>; /* SDMMCLIODNR */ | |
| sdhci,auto-cmd12; | |
| }; | |
| /include/ "qoriq-i2c-0.dtsi" | |
| /include/ "qoriq-i2c-1.dtsi" | |
| /include/ "qoriq-duart-0.dtsi" | |
| /include/ "qoriq-duart-1.dtsi" | |
| /include/ "qoriq-gpio-0.dtsi" | |
| /include/ "qoriq-gpio-1.dtsi" | |
| /include/ "qoriq-gpio-2.dtsi" | |
| /include/ "qoriq-gpio-3.dtsi" | |
| /include/ "qoriq-usb2-mph-0.dtsi" | |
| usb0: usb@210000 { | |
| compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; | |
| fsl,iommu-parent = <&pamu1>; | |
| fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ | |
| phy_type = "utmi"; | |
| port0; | |
| }; | |
| /include/ "qoriq-usb2-dr-0.dtsi" | |
| usb1: usb@211000 { | |
| compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; | |
| fsl,iommu-parent = <&pamu1>; | |
| fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */ | |
| dr_mode = "host"; | |
| phy_type = "utmi"; | |
| }; | |
| /include/ "qoriq-sec5.2-0.dtsi" | |
| /include/ "qoriq-qman3.dtsi" | |
| /include/ "qoriq-bman1.dtsi" | |
| /include/ "qoriq-fman3-0.dtsi" | |
| /include/ "qoriq-fman3-0-1g-0.dtsi" | |
| /include/ "qoriq-fman3-0-1g-1.dtsi" | |
| /include/ "qoriq-fman3-0-1g-2.dtsi" | |
| /include/ "qoriq-fman3-0-1g-3.dtsi" | |
| /include/ "qoriq-fman3-0-1g-4.dtsi" | |
| /include/ "qoriq-fman3-0-1g-5.dtsi" | |
| /include/ "qoriq-fman3-0-10g-0.dtsi" | |
| /include/ "qoriq-fman3-0-10g-1.dtsi" | |
| fman@400000 { | |
| enet0: ethernet@e0000 { | |
| }; | |
| enet1: ethernet@e2000 { | |
| }; | |
| enet2: ethernet@e4000 { | |
| }; | |
| enet3: ethernet@e6000 { | |
| }; | |
| enet4: ethernet@e8000 { | |
| }; | |
| enet5: ethernet@ea000 { | |
| }; | |
| enet6: ethernet@f0000 { | |
| }; | |
| enet7: ethernet@f2000 { | |
| }; | |
| mdio@fc000 { | |
| interrupts = <100 1 0 0>; | |
| }; | |
| mdio@fd000 { | |
| interrupts = <101 1 0 0>; | |
| }; | |
| }; | |
| L2_1: l2-cache-controller@c20000 { | |
| /* Cluster 0 L2 cache */ | |
| compatible = "fsl,t2080-l2-cache-controller"; | |
| reg = <0xc20000 0x40000>; | |
| next-level-cache = <&cpc>; | |
| }; | |
| }; |