| /* | |
| * base MPC5200b Device Tree Source | |
| * | |
| * Copyright (C) 2010 SecretLab | |
| * Grant Likely <grant@secretlab.ca> | |
| * John Bonesio <bones@secretlab.ca> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| /dts-v1/; | |
| / { | |
| model = "fsl,mpc5200b"; | |
| compatible = "fsl,mpc5200b"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| interrupt-parent = <&mpc5200_pic>; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| powerpc: PowerPC,5200@0 { | |
| device_type = "cpu"; | |
| reg = <0>; | |
| d-cache-line-size = <32>; | |
| i-cache-line-size = <32>; | |
| d-cache-size = <0x4000>; // L1, 16K | |
| i-cache-size = <0x4000>; // L1, 16K | |
| timebase-frequency = <0>; // from bootloader | |
| bus-frequency = <0>; // from bootloader | |
| clock-frequency = <0>; // from bootloader | |
| }; | |
| }; | |
| memory: memory { | |
| device_type = "memory"; | |
| reg = <0x00000000 0x04000000>; // 64MB | |
| }; | |
| soc: soc5200@f0000000 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "fsl,mpc5200b-immr"; | |
| ranges = <0 0xf0000000 0x0000c000>; | |
| reg = <0xf0000000 0x00000100>; | |
| bus-frequency = <0>; // from bootloader | |
| system-frequency = <0>; // from bootloader | |
| cdm@200 { | |
| compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; | |
| reg = <0x200 0x38>; | |
| }; | |
| mpc5200_pic: interrupt-controller@500 { | |
| // 5200 interrupts are encoded into two levels; | |
| interrupt-controller; | |
| #interrupt-cells = <3>; | |
| compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; | |
| reg = <0x500 0x80>; | |
| }; | |
| gpt0: timer@600 { // General Purpose Timer | |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; | |
| #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode | |
| reg = <0x600 0x10>; | |
| interrupts = <1 9 0>; | |
| // add 'fsl,has-wdt' to enable watchdog | |
| }; | |
| gpt1: timer@610 { // General Purpose Timer | |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; | |
| #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode | |
| reg = <0x610 0x10>; | |
| interrupts = <1 10 0>; | |
| }; | |
| gpt2: timer@620 { // General Purpose Timer | |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; | |
| #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode | |
| reg = <0x620 0x10>; | |
| interrupts = <1 11 0>; | |
| }; | |
| gpt3: timer@630 { // General Purpose Timer | |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; | |
| #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode | |
| reg = <0x630 0x10>; | |
| interrupts = <1 12 0>; | |
| }; | |
| gpt4: timer@640 { // General Purpose Timer | |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; | |
| #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode | |
| reg = <0x640 0x10>; | |
| interrupts = <1 13 0>; | |
| }; | |
| gpt5: timer@650 { // General Purpose Timer | |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; | |
| #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode | |
| reg = <0x650 0x10>; | |
| interrupts = <1 14 0>; | |
| }; | |
| gpt6: timer@660 { // General Purpose Timer | |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; | |
| #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode | |
| reg = <0x660 0x10>; | |
| interrupts = <1 15 0>; | |
| }; | |
| gpt7: timer@670 { // General Purpose Timer | |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; | |
| #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode | |
| reg = <0x670 0x10>; | |
| interrupts = <1 16 0>; | |
| }; | |
| rtc@800 { // Real time clock | |
| compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; | |
| reg = <0x800 0x100>; | |
| interrupts = <1 5 0 1 6 0>; | |
| }; | |
| can@900 { | |
| compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; | |
| interrupts = <2 17 0>; | |
| reg = <0x900 0x80>; | |
| }; | |
| can@980 { | |
| compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; | |
| interrupts = <2 18 0>; | |
| reg = <0x980 0x80>; | |
| }; | |
| gpio_simple: gpio@b00 { | |
| compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; | |
| reg = <0xb00 0x40>; | |
| interrupts = <1 7 0>; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| }; | |
| gpio_wkup: gpio@c00 { | |
| compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; | |
| reg = <0xc00 0x40>; | |
| interrupts = <1 8 0 0 3 0>; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| }; | |
| spi@f00 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; | |
| reg = <0xf00 0x20>; | |
| interrupts = <2 13 0 2 14 0>; | |
| }; | |
| usb: usb@1000 { | |
| compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; | |
| reg = <0x1000 0xff>; | |
| interrupts = <2 6 0>; | |
| }; | |
| dma-controller@1200 { | |
| compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; | |
| reg = <0x1200 0x80>; | |
| interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 | |
| 3 4 0 3 5 0 3 6 0 3 7 0 | |
| 3 8 0 3 9 0 3 10 0 3 11 0 | |
| 3 12 0 3 13 0 3 14 0 3 15 0>; | |
| }; | |
| xlb@1f00 { | |
| compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; | |
| reg = <0x1f00 0x100>; | |
| }; | |
| psc1: psc@2000 { // PSC1 | |
| compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; | |
| reg = <0x2000 0x100>; | |
| interrupts = <2 1 0>; | |
| }; | |
| psc2: psc@2200 { // PSC2 | |
| compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; | |
| reg = <0x2200 0x100>; | |
| interrupts = <2 2 0>; | |
| }; | |
| psc3: psc@2400 { // PSC3 | |
| compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; | |
| reg = <0x2400 0x100>; | |
| interrupts = <2 3 0>; | |
| }; | |
| psc4: psc@2600 { // PSC4 | |
| compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; | |
| reg = <0x2600 0x100>; | |
| interrupts = <2 11 0>; | |
| }; | |
| psc5: psc@2800 { // PSC5 | |
| compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; | |
| reg = <0x2800 0x100>; | |
| interrupts = <2 12 0>; | |
| }; | |
| psc6: psc@2c00 { // PSC6 | |
| compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; | |
| reg = <0x2c00 0x100>; | |
| interrupts = <2 4 0>; | |
| }; | |
| eth0: ethernet@3000 { | |
| compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; | |
| reg = <0x3000 0x400>; | |
| local-mac-address = [ 00 00 00 00 00 00 ]; | |
| interrupts = <2 5 0>; | |
| }; | |
| mdio@3000 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; | |
| reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts | |
| interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. | |
| }; | |
| ata@3a00 { | |
| compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; | |
| reg = <0x3a00 0x100>; | |
| interrupts = <2 7 0>; | |
| }; | |
| sclpc@3c00 { | |
| compatible = "fsl,mpc5200-lpbfifo"; | |
| reg = <0x3c00 0x60>; | |
| interrupts = <2 23 0>; | |
| }; | |
| i2c@3d00 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; | |
| reg = <0x3d00 0x40>; | |
| interrupts = <2 15 0>; | |
| }; | |
| i2c@3d40 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; | |
| reg = <0x3d40 0x40>; | |
| interrupts = <2 16 0>; | |
| }; | |
| sram@8000 { | |
| compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; | |
| reg = <0x8000 0x4000>; | |
| }; | |
| }; | |
| pci: pci@f0000d00 { | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| device_type = "pci"; | |
| compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; | |
| reg = <0xf0000d00 0x100>; | |
| // interrupt-map-mask = need to add | |
| // interrupt-map = need to add | |
| clock-frequency = <0>; // From boot loader | |
| interrupts = <2 8 0 2 9 0 2 10 0>; | |
| bus-range = <0 0>; | |
| // ranges = need to add | |
| }; | |
| localbus: localbus { | |
| compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; | |
| #address-cells = <2>; | |
| #size-cells = <1>; | |
| ranges = <0 0 0xfc000000 0x2000000>; | |
| }; | |
| }; |