| /* | |
| * Architecture specific (PPC64) functions for kexec based crash dumps. | |
| * | |
| * Copyright (C) 2005, IBM Corp. | |
| * | |
| * Created by: Haren Myneni | |
| * | |
| * This source code is licensed under the GNU General Public License, | |
| * Version 2. See the file COPYING for more details. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/smp.h> | |
| #include <linux/reboot.h> | |
| #include <linux/kexec.h> | |
| #include <linux/export.h> | |
| #include <linux/crash_dump.h> | |
| #include <linux/delay.h> | |
| #include <linux/irq.h> | |
| #include <linux/types.h> | |
| #include <asm/processor.h> | |
| #include <asm/machdep.h> | |
| #include <asm/kexec.h> | |
| #include <asm/kdump.h> | |
| #include <asm/prom.h> | |
| #include <asm/smp.h> | |
| #include <asm/setjmp.h> | |
| #include <asm/debug.h> | |
| /* | |
| * The primary CPU waits a while for all secondary CPUs to enter. This is to | |
| * avoid sending an IPI if the secondary CPUs are entering | |
| * crash_kexec_secondary on their own (eg via a system reset). | |
| * | |
| * The secondary timeout has to be longer than the primary. Both timeouts are | |
| * in milliseconds. | |
| */ | |
| #define PRIMARY_TIMEOUT 500 | |
| #define SECONDARY_TIMEOUT 1000 | |
| #define IPI_TIMEOUT 10000 | |
| #define REAL_MODE_TIMEOUT 10000 | |
| /* This keeps a track of which one is the crashing cpu. */ | |
| int crashing_cpu = -1; | |
| static int time_to_dump; | |
| #define CRASH_HANDLER_MAX 3 | |
| /* List of shutdown handles */ | |
| static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX]; | |
| static DEFINE_SPINLOCK(crash_handlers_lock); | |
| static unsigned long crash_shutdown_buf[JMP_BUF_LEN]; | |
| static int crash_shutdown_cpu = -1; | |
| static int handle_fault(struct pt_regs *regs) | |
| { | |
| if (crash_shutdown_cpu == smp_processor_id()) | |
| longjmp(crash_shutdown_buf, 1); | |
| return 0; | |
| } | |
| #ifdef CONFIG_SMP | |
| static atomic_t cpus_in_crash; | |
| static void crash_ipi_callback(struct pt_regs *regs) | |
| { | |
| static cpumask_t cpus_state_saved = CPU_MASK_NONE; | |
| int cpu = smp_processor_id(); | |
| if (!cpu_online(cpu)) | |
| return; | |
| hard_irq_disable(); | |
| if (!cpumask_test_cpu(cpu, &cpus_state_saved)) { | |
| crash_save_cpu(regs, cpu); | |
| cpumask_set_cpu(cpu, &cpus_state_saved); | |
| } | |
| atomic_inc(&cpus_in_crash); | |
| smp_mb__after_atomic(); | |
| /* | |
| * Starting the kdump boot. | |
| * This barrier is needed to make sure that all CPUs are stopped. | |
| */ | |
| while (!time_to_dump) | |
| cpu_relax(); | |
| if (ppc_md.kexec_cpu_down) | |
| ppc_md.kexec_cpu_down(1, 1); | |
| #ifdef CONFIG_PPC64 | |
| kexec_smp_wait(); | |
| #else | |
| for (;;); /* FIXME */ | |
| #endif | |
| /* NOTREACHED */ | |
| } | |
| static void crash_kexec_prepare_cpus(int cpu) | |
| { | |
| unsigned int msecs; | |
| unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ | |
| int tries = 0; | |
| int (*old_handler)(struct pt_regs *regs); | |
| printk(KERN_EMERG "Sending IPI to other CPUs\n"); | |
| crash_send_ipi(crash_ipi_callback); | |
| smp_wmb(); | |
| again: | |
| /* | |
| * FIXME: Until we will have the way to stop other CPUs reliably, | |
| * the crash CPU will send an IPI and wait for other CPUs to | |
| * respond. | |
| */ | |
| msecs = IPI_TIMEOUT; | |
| while ((atomic_read(&cpus_in_crash) < ncpus) && (--msecs > 0)) | |
| mdelay(1); | |
| /* Would it be better to replace the trap vector here? */ | |
| if (atomic_read(&cpus_in_crash) >= ncpus) { | |
| printk(KERN_EMERG "IPI complete\n"); | |
| return; | |
| } | |
| printk(KERN_EMERG "ERROR: %d cpu(s) not responding\n", | |
| ncpus - atomic_read(&cpus_in_crash)); | |
| /* | |
| * If we have a panic timeout set then we can't wait indefinitely | |
| * for someone to activate system reset. We also give up on the | |
| * second time through if system reset fail to work. | |
| */ | |
| if ((panic_timeout > 0) || (tries > 0)) | |
| return; | |
| /* | |
| * A system reset will cause all CPUs to take an 0x100 exception. | |
| * The primary CPU returns here via setjmp, and the secondary | |
| * CPUs reexecute the crash_kexec_secondary path. | |
| */ | |
| old_handler = __debugger; | |
| __debugger = handle_fault; | |
| crash_shutdown_cpu = smp_processor_id(); | |
| if (setjmp(crash_shutdown_buf) == 0) { | |
| printk(KERN_EMERG "Activate system reset (dumprestart) " | |
| "to stop other cpu(s)\n"); | |
| /* | |
| * A system reset will force all CPUs to execute the | |
| * crash code again. We need to reset cpus_in_crash so we | |
| * wait for everyone to do this. | |
| */ | |
| atomic_set(&cpus_in_crash, 0); | |
| smp_mb(); | |
| while (atomic_read(&cpus_in_crash) < ncpus) | |
| cpu_relax(); | |
| } | |
| crash_shutdown_cpu = -1; | |
| __debugger = old_handler; | |
| tries++; | |
| goto again; | |
| } | |
| /* | |
| * This function will be called by secondary cpus. | |
| */ | |
| void crash_kexec_secondary(struct pt_regs *regs) | |
| { | |
| unsigned long flags; | |
| int msecs = SECONDARY_TIMEOUT; | |
| local_irq_save(flags); | |
| /* Wait for the primary crash CPU to signal its progress */ | |
| while (crashing_cpu < 0) { | |
| if (--msecs < 0) { | |
| /* No response, kdump image may not have been loaded */ | |
| local_irq_restore(flags); | |
| return; | |
| } | |
| mdelay(1); | |
| } | |
| crash_ipi_callback(regs); | |
| } | |
| #else /* ! CONFIG_SMP */ | |
| static void crash_kexec_prepare_cpus(int cpu) | |
| { | |
| /* | |
| * move the secondaries to us so that we can copy | |
| * the new kernel 0-0x100 safely | |
| * | |
| * do this if kexec in setup.c ? | |
| */ | |
| #ifdef CONFIG_PPC64 | |
| smp_release_cpus(); | |
| #else | |
| /* FIXME */ | |
| #endif | |
| } | |
| void crash_kexec_secondary(struct pt_regs *regs) | |
| { | |
| } | |
| #endif /* CONFIG_SMP */ | |
| /* wait for all the CPUs to hit real mode but timeout if they don't come in */ | |
| #if defined(CONFIG_SMP) && defined(CONFIG_PPC64) | |
| static void __maybe_unused crash_kexec_wait_realmode(int cpu) | |
| { | |
| unsigned int msecs; | |
| int i; | |
| msecs = REAL_MODE_TIMEOUT; | |
| for (i=0; i < nr_cpu_ids && msecs > 0; i++) { | |
| if (i == cpu) | |
| continue; | |
| while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) { | |
| barrier(); | |
| if (!cpu_possible(i) || !cpu_online(i) || (msecs <= 0)) | |
| break; | |
| msecs--; | |
| mdelay(1); | |
| } | |
| } | |
| mb(); | |
| } | |
| #else | |
| static inline void crash_kexec_wait_realmode(int cpu) {} | |
| #endif /* CONFIG_SMP && CONFIG_PPC64 */ | |
| /* | |
| * Register a function to be called on shutdown. Only use this if you | |
| * can't reset your device in the second kernel. | |
| */ | |
| int crash_shutdown_register(crash_shutdown_t handler) | |
| { | |
| unsigned int i, rc; | |
| spin_lock(&crash_handlers_lock); | |
| for (i = 0 ; i < CRASH_HANDLER_MAX; i++) | |
| if (!crash_shutdown_handles[i]) { | |
| /* Insert handle at first empty entry */ | |
| crash_shutdown_handles[i] = handler; | |
| rc = 0; | |
| break; | |
| } | |
| if (i == CRASH_HANDLER_MAX) { | |
| printk(KERN_ERR "Crash shutdown handles full, " | |
| "not registered.\n"); | |
| rc = 1; | |
| } | |
| spin_unlock(&crash_handlers_lock); | |
| return rc; | |
| } | |
| EXPORT_SYMBOL(crash_shutdown_register); | |
| int crash_shutdown_unregister(crash_shutdown_t handler) | |
| { | |
| unsigned int i, rc; | |
| spin_lock(&crash_handlers_lock); | |
| for (i = 0 ; i < CRASH_HANDLER_MAX; i++) | |
| if (crash_shutdown_handles[i] == handler) | |
| break; | |
| if (i == CRASH_HANDLER_MAX) { | |
| printk(KERN_ERR "Crash shutdown handle not found\n"); | |
| rc = 1; | |
| } else { | |
| /* Shift handles down */ | |
| for (; i < (CRASH_HANDLER_MAX - 1); i++) | |
| crash_shutdown_handles[i] = | |
| crash_shutdown_handles[i+1]; | |
| /* | |
| * Reset last entry to NULL now that it has been shifted down, | |
| * this will allow new handles to be added here. | |
| */ | |
| crash_shutdown_handles[i] = NULL; | |
| rc = 0; | |
| } | |
| spin_unlock(&crash_handlers_lock); | |
| return rc; | |
| } | |
| EXPORT_SYMBOL(crash_shutdown_unregister); | |
| void default_machine_crash_shutdown(struct pt_regs *regs) | |
| { | |
| unsigned int i; | |
| int (*old_handler)(struct pt_regs *regs); | |
| /* | |
| * This function is only called after the system | |
| * has panicked or is otherwise in a critical state. | |
| * The minimum amount of code to allow a kexec'd kernel | |
| * to run successfully needs to happen here. | |
| * | |
| * In practice this means stopping other cpus in | |
| * an SMP system. | |
| * The kernel is broken so disable interrupts. | |
| */ | |
| hard_irq_disable(); | |
| /* | |
| * Make a note of crashing cpu. Will be used in machine_kexec | |
| * such that another IPI will not be sent. | |
| */ | |
| crashing_cpu = smp_processor_id(); | |
| /* | |
| * If we came in via system reset, wait a while for the secondary | |
| * CPUs to enter. | |
| */ | |
| if (TRAP(regs) == 0x100) | |
| mdelay(PRIMARY_TIMEOUT); | |
| crash_kexec_prepare_cpus(crashing_cpu); | |
| crash_save_cpu(regs, crashing_cpu); | |
| time_to_dump = 1; | |
| crash_kexec_wait_realmode(crashing_cpu); | |
| machine_kexec_mask_interrupts(); | |
| /* | |
| * Call registered shutdown routines safely. Swap out | |
| * __debugger_fault_handler, and replace on exit. | |
| */ | |
| old_handler = __debugger_fault_handler; | |
| __debugger_fault_handler = handle_fault; | |
| crash_shutdown_cpu = smp_processor_id(); | |
| for (i = 0; i < CRASH_HANDLER_MAX && crash_shutdown_handles[i]; i++) { | |
| if (setjmp(crash_shutdown_buf) == 0) { | |
| /* | |
| * Insert syncs and delay to ensure | |
| * instructions in the dangerous region don't | |
| * leak away from this protected region. | |
| */ | |
| asm volatile("sync; isync"); | |
| /* dangerous region */ | |
| crash_shutdown_handles[i](); | |
| asm volatile("sync; isync"); | |
| } | |
| } | |
| crash_shutdown_cpu = -1; | |
| __debugger_fault_handler = old_handler; | |
| if (ppc_md.kexec_cpu_down) | |
| ppc_md.kexec_cpu_down(1, 0); | |
| } |