| #ifndef _ASM_S390_PCI_INSN_H | |
| #define _ASM_S390_PCI_INSN_H | |
| /* Load/Store status codes */ | |
| #define ZPCI_PCI_ST_FUNC_NOT_ENABLED 4 | |
| #define ZPCI_PCI_ST_FUNC_IN_ERR 8 | |
| #define ZPCI_PCI_ST_BLOCKED 12 | |
| #define ZPCI_PCI_ST_INSUF_RES 16 | |
| #define ZPCI_PCI_ST_INVAL_AS 20 | |
| #define ZPCI_PCI_ST_FUNC_ALREADY_ENABLED 24 | |
| #define ZPCI_PCI_ST_DMA_AS_NOT_ENABLED 28 | |
| #define ZPCI_PCI_ST_2ND_OP_IN_INV_AS 36 | |
| #define ZPCI_PCI_ST_FUNC_NOT_AVAIL 40 | |
| #define ZPCI_PCI_ST_ALREADY_IN_RQ_STATE 44 | |
| /* Load/Store return codes */ | |
| #define ZPCI_PCI_LS_OK 0 | |
| #define ZPCI_PCI_LS_ERR 1 | |
| #define ZPCI_PCI_LS_BUSY 2 | |
| #define ZPCI_PCI_LS_INVAL_HANDLE 3 | |
| /* Load/Store address space identifiers */ | |
| #define ZPCI_PCIAS_MEMIO_0 0 | |
| #define ZPCI_PCIAS_MEMIO_1 1 | |
| #define ZPCI_PCIAS_MEMIO_2 2 | |
| #define ZPCI_PCIAS_MEMIO_3 3 | |
| #define ZPCI_PCIAS_MEMIO_4 4 | |
| #define ZPCI_PCIAS_MEMIO_5 5 | |
| #define ZPCI_PCIAS_CFGSPC 15 | |
| /* Modify PCI Function Controls */ | |
| #define ZPCI_MOD_FC_REG_INT 2 | |
| #define ZPCI_MOD_FC_DEREG_INT 3 | |
| #define ZPCI_MOD_FC_REG_IOAT 4 | |
| #define ZPCI_MOD_FC_DEREG_IOAT 5 | |
| #define ZPCI_MOD_FC_REREG_IOAT 6 | |
| #define ZPCI_MOD_FC_RESET_ERROR 7 | |
| #define ZPCI_MOD_FC_RESET_BLOCK 9 | |
| #define ZPCI_MOD_FC_SET_MEASURE 10 | |
| /* FIB function controls */ | |
| #define ZPCI_FIB_FC_ENABLED 0x80 | |
| #define ZPCI_FIB_FC_ERROR 0x40 | |
| #define ZPCI_FIB_FC_LS_BLOCKED 0x20 | |
| #define ZPCI_FIB_FC_DMAAS_REG 0x10 | |
| /* FIB function controls */ | |
| #define ZPCI_FIB_FC_ENABLED 0x80 | |
| #define ZPCI_FIB_FC_ERROR 0x40 | |
| #define ZPCI_FIB_FC_LS_BLOCKED 0x20 | |
| #define ZPCI_FIB_FC_DMAAS_REG 0x10 | |
| /* Function Information Block */ | |
| struct zpci_fib { | |
| u32 fmt : 8; /* format */ | |
| u32 : 24; | |
| u32 : 32; | |
| u8 fc; /* function controls */ | |
| u64 : 56; | |
| u64 pba; /* PCI base address */ | |
| u64 pal; /* PCI address limit */ | |
| u64 iota; /* I/O Translation Anchor */ | |
| u32 : 1; | |
| u32 isc : 3; /* Interrupt subclass */ | |
| u32 noi : 12; /* Number of interrupts */ | |
| u32 : 2; | |
| u32 aibvo : 6; /* Adapter interrupt bit vector offset */ | |
| u32 sum : 1; /* Adapter int summary bit enabled */ | |
| u32 : 1; | |
| u32 aisbo : 6; /* Adapter int summary bit offset */ | |
| u32 : 32; | |
| u64 aibv; /* Adapter int bit vector address */ | |
| u64 aisb; /* Adapter int summary bit address */ | |
| u64 fmb_addr; /* Function measurement block address and key */ | |
| u32 : 32; | |
| u32 gd; | |
| } __packed __aligned(8); | |
| int zpci_mod_fc(u64 req, struct zpci_fib *fib); | |
| int zpci_refresh_trans(u64 fn, u64 addr, u64 range); | |
| int zpci_load(u64 *data, u64 req, u64 offset); | |
| int zpci_store(u64 data, u64 req, u64 offset); | |
| int zpci_store_block(const u64 *data, u64 req, u64 offset); | |
| void zpci_set_irq_ctrl(u16 ctl, char *unused, u8 isc); | |
| #endif |