| /* | |
| * S390 version | |
| * Copyright IBM Corp. 1999, 2000 | |
| * Author(s): Hartmut Penner (hp@de.ibm.com), | |
| * Martin Schwidefsky (schwidefsky@de.ibm.com) | |
| * | |
| * Derived from "include/asm-i386/uaccess.h" | |
| */ | |
| #ifndef __S390_UACCESS_H | |
| #define __S390_UACCESS_H | |
| /* | |
| * User space memory access functions | |
| */ | |
| #include <linux/sched.h> | |
| #include <linux/errno.h> | |
| #include <asm/ctl_reg.h> | |
| #define VERIFY_READ 0 | |
| #define VERIFY_WRITE 1 | |
| /* | |
| * The fs value determines whether argument validity checking should be | |
| * performed or not. If get_fs() == USER_DS, checking is performed, with | |
| * get_fs() == KERNEL_DS, checking is bypassed. | |
| * | |
| * For historical reasons, these macros are grossly misnamed. | |
| */ | |
| #define MAKE_MM_SEG(a) ((mm_segment_t) { (a) }) | |
| #define KERNEL_DS MAKE_MM_SEG(0) | |
| #define USER_DS MAKE_MM_SEG(1) | |
| #define get_ds() (KERNEL_DS) | |
| #define get_fs() (current->thread.mm_segment) | |
| #define set_fs(x) \ | |
| ({ \ | |
| unsigned long __pto; \ | |
| current->thread.mm_segment = (x); \ | |
| __pto = current->thread.mm_segment.ar4 ? \ | |
| S390_lowcore.user_asce : S390_lowcore.kernel_asce; \ | |
| __ctl_load(__pto, 7, 7); \ | |
| }) | |
| #define segment_eq(a,b) ((a).ar4 == (b).ar4) | |
| static inline int __range_ok(unsigned long addr, unsigned long size) | |
| { | |
| return 1; | |
| } | |
| #define __access_ok(addr, size) \ | |
| ({ \ | |
| __chk_user_ptr(addr); \ | |
| __range_ok((unsigned long)(addr), (size)); \ | |
| }) | |
| #define access_ok(type, addr, size) __access_ok(addr, size) | |
| /* | |
| * The exception table consists of pairs of addresses: the first is the | |
| * address of an instruction that is allowed to fault, and the second is | |
| * the address at which the program should continue. No registers are | |
| * modified, so it is entirely up to the continuation code to figure out | |
| * what to do. | |
| * | |
| * All the routines below use bits of fixup code that are out of line | |
| * with the main instruction path. This means when everything is well, | |
| * we don't even have to jump over them. Further, they do not intrude | |
| * on our cache or tlb entries. | |
| */ | |
| struct exception_table_entry | |
| { | |
| int insn, fixup; | |
| }; | |
| static inline unsigned long extable_fixup(const struct exception_table_entry *x) | |
| { | |
| return (unsigned long)&x->fixup + x->fixup; | |
| } | |
| #define ARCH_HAS_RELATIVE_EXTABLE | |
| /** | |
| * __copy_from_user: - Copy a block of data from user space, with less checking. | |
| * @to: Destination address, in kernel space. | |
| * @from: Source address, in user space. | |
| * @n: Number of bytes to copy. | |
| * | |
| * Context: User context only. This function may sleep if pagefaults are | |
| * enabled. | |
| * | |
| * Copy data from user space to kernel space. Caller must check | |
| * the specified block with access_ok() before calling this function. | |
| * | |
| * Returns number of bytes that could not be copied. | |
| * On success, this will be zero. | |
| * | |
| * If some data could not be copied, this function will pad the copied | |
| * data to the requested size using zero bytes. | |
| */ | |
| unsigned long __must_check __copy_from_user(void *to, const void __user *from, | |
| unsigned long n); | |
| /** | |
| * __copy_to_user: - Copy a block of data into user space, with less checking. | |
| * @to: Destination address, in user space. | |
| * @from: Source address, in kernel space. | |
| * @n: Number of bytes to copy. | |
| * | |
| * Context: User context only. This function may sleep if pagefaults are | |
| * enabled. | |
| * | |
| * Copy data from kernel space to user space. Caller must check | |
| * the specified block with access_ok() before calling this function. | |
| * | |
| * Returns number of bytes that could not be copied. | |
| * On success, this will be zero. | |
| */ | |
| unsigned long __must_check __copy_to_user(void __user *to, const void *from, | |
| unsigned long n); | |
| #define __copy_to_user_inatomic __copy_to_user | |
| #define __copy_from_user_inatomic __copy_from_user | |
| #ifdef CONFIG_HAVE_MARCH_Z10_FEATURES | |
| #define __put_get_user_asm(to, from, size, spec) \ | |
| ({ \ | |
| register unsigned long __reg0 asm("0") = spec; \ | |
| int __rc; \ | |
| \ | |
| asm volatile( \ | |
| "0: mvcos %1,%3,%2\n" \ | |
| "1: xr %0,%0\n" \ | |
| "2:\n" \ | |
| ".pushsection .fixup, \"ax\"\n" \ | |
| "3: lhi %0,%5\n" \ | |
| " jg 2b\n" \ | |
| ".popsection\n" \ | |
| EX_TABLE(0b,3b) EX_TABLE(1b,3b) \ | |
| : "=d" (__rc), "=Q" (*(to)) \ | |
| : "d" (size), "Q" (*(from)), \ | |
| "d" (__reg0), "K" (-EFAULT) \ | |
| : "cc"); \ | |
| __rc; \ | |
| }) | |
| static inline int __put_user_fn(void *x, void __user *ptr, unsigned long size) | |
| { | |
| unsigned long spec = 0x810000UL; | |
| int rc; | |
| switch (size) { | |
| case 1: | |
| rc = __put_get_user_asm((unsigned char __user *)ptr, | |
| (unsigned char *)x, | |
| size, spec); | |
| break; | |
| case 2: | |
| rc = __put_get_user_asm((unsigned short __user *)ptr, | |
| (unsigned short *)x, | |
| size, spec); | |
| break; | |
| case 4: | |
| rc = __put_get_user_asm((unsigned int __user *)ptr, | |
| (unsigned int *)x, | |
| size, spec); | |
| break; | |
| case 8: | |
| rc = __put_get_user_asm((unsigned long __user *)ptr, | |
| (unsigned long *)x, | |
| size, spec); | |
| break; | |
| }; | |
| return rc; | |
| } | |
| static inline int __get_user_fn(void *x, const void __user *ptr, unsigned long size) | |
| { | |
| unsigned long spec = 0x81UL; | |
| int rc; | |
| switch (size) { | |
| case 1: | |
| rc = __put_get_user_asm((unsigned char *)x, | |
| (unsigned char __user *)ptr, | |
| size, spec); | |
| break; | |
| case 2: | |
| rc = __put_get_user_asm((unsigned short *)x, | |
| (unsigned short __user *)ptr, | |
| size, spec); | |
| break; | |
| case 4: | |
| rc = __put_get_user_asm((unsigned int *)x, | |
| (unsigned int __user *)ptr, | |
| size, spec); | |
| break; | |
| case 8: | |
| rc = __put_get_user_asm((unsigned long *)x, | |
| (unsigned long __user *)ptr, | |
| size, spec); | |
| break; | |
| }; | |
| return rc; | |
| } | |
| #else /* CONFIG_HAVE_MARCH_Z10_FEATURES */ | |
| static inline int __put_user_fn(void *x, void __user *ptr, unsigned long size) | |
| { | |
| size = __copy_to_user(ptr, x, size); | |
| return size ? -EFAULT : 0; | |
| } | |
| static inline int __get_user_fn(void *x, const void __user *ptr, unsigned long size) | |
| { | |
| size = __copy_from_user(x, ptr, size); | |
| return size ? -EFAULT : 0; | |
| } | |
| #endif /* CONFIG_HAVE_MARCH_Z10_FEATURES */ | |
| /* | |
| * These are the main single-value transfer routines. They automatically | |
| * use the right size if we just have the right pointer type. | |
| */ | |
| #define __put_user(x, ptr) \ | |
| ({ \ | |
| __typeof__(*(ptr)) __x = (x); \ | |
| int __pu_err = -EFAULT; \ | |
| __chk_user_ptr(ptr); \ | |
| switch (sizeof (*(ptr))) { \ | |
| case 1: \ | |
| case 2: \ | |
| case 4: \ | |
| case 8: \ | |
| __pu_err = __put_user_fn(&__x, ptr, \ | |
| sizeof(*(ptr))); \ | |
| break; \ | |
| default: \ | |
| __put_user_bad(); \ | |
| break; \ | |
| } \ | |
| __builtin_expect(__pu_err, 0); \ | |
| }) | |
| #define put_user(x, ptr) \ | |
| ({ \ | |
| might_fault(); \ | |
| __put_user(x, ptr); \ | |
| }) | |
| int __put_user_bad(void) __attribute__((noreturn)); | |
| #define __get_user(x, ptr) \ | |
| ({ \ | |
| int __gu_err = -EFAULT; \ | |
| __chk_user_ptr(ptr); \ | |
| switch (sizeof(*(ptr))) { \ | |
| case 1: { \ | |
| unsigned char __x = 0; \ | |
| __gu_err = __get_user_fn(&__x, ptr, \ | |
| sizeof(*(ptr))); \ | |
| (x) = *(__force __typeof__(*(ptr)) *) &__x; \ | |
| break; \ | |
| }; \ | |
| case 2: { \ | |
| unsigned short __x = 0; \ | |
| __gu_err = __get_user_fn(&__x, ptr, \ | |
| sizeof(*(ptr))); \ | |
| (x) = *(__force __typeof__(*(ptr)) *) &__x; \ | |
| break; \ | |
| }; \ | |
| case 4: { \ | |
| unsigned int __x = 0; \ | |
| __gu_err = __get_user_fn(&__x, ptr, \ | |
| sizeof(*(ptr))); \ | |
| (x) = *(__force __typeof__(*(ptr)) *) &__x; \ | |
| break; \ | |
| }; \ | |
| case 8: { \ | |
| unsigned long long __x = 0; \ | |
| __gu_err = __get_user_fn(&__x, ptr, \ | |
| sizeof(*(ptr))); \ | |
| (x) = *(__force __typeof__(*(ptr)) *) &__x; \ | |
| break; \ | |
| }; \ | |
| default: \ | |
| __get_user_bad(); \ | |
| break; \ | |
| } \ | |
| __builtin_expect(__gu_err, 0); \ | |
| }) | |
| #define get_user(x, ptr) \ | |
| ({ \ | |
| might_fault(); \ | |
| __get_user(x, ptr); \ | |
| }) | |
| int __get_user_bad(void) __attribute__((noreturn)); | |
| #define __put_user_unaligned __put_user | |
| #define __get_user_unaligned __get_user | |
| extern void __compiletime_error("usercopy buffer size is too small") | |
| __bad_copy_user(void); | |
| static inline void copy_user_overflow(int size, unsigned long count) | |
| { | |
| WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count); | |
| } | |
| /** | |
| * copy_to_user: - Copy a block of data into user space. | |
| * @to: Destination address, in user space. | |
| * @from: Source address, in kernel space. | |
| * @n: Number of bytes to copy. | |
| * | |
| * Context: User context only. This function may sleep if pagefaults are | |
| * enabled. | |
| * | |
| * Copy data from kernel space to user space. | |
| * | |
| * Returns number of bytes that could not be copied. | |
| * On success, this will be zero. | |
| */ | |
| static inline unsigned long __must_check | |
| copy_to_user(void __user *to, const void *from, unsigned long n) | |
| { | |
| might_fault(); | |
| return __copy_to_user(to, from, n); | |
| } | |
| /** | |
| * copy_from_user: - Copy a block of data from user space. | |
| * @to: Destination address, in kernel space. | |
| * @from: Source address, in user space. | |
| * @n: Number of bytes to copy. | |
| * | |
| * Context: User context only. This function may sleep if pagefaults are | |
| * enabled. | |
| * | |
| * Copy data from user space to kernel space. | |
| * | |
| * Returns number of bytes that could not be copied. | |
| * On success, this will be zero. | |
| * | |
| * If some data could not be copied, this function will pad the copied | |
| * data to the requested size using zero bytes. | |
| */ | |
| static inline unsigned long __must_check | |
| copy_from_user(void *to, const void __user *from, unsigned long n) | |
| { | |
| unsigned int sz = __compiletime_object_size(to); | |
| might_fault(); | |
| if (unlikely(sz != -1 && sz < n)) { | |
| if (!__builtin_constant_p(n)) | |
| copy_user_overflow(sz, n); | |
| else | |
| __bad_copy_user(); | |
| return n; | |
| } | |
| return __copy_from_user(to, from, n); | |
| } | |
| unsigned long __must_check | |
| __copy_in_user(void __user *to, const void __user *from, unsigned long n); | |
| static inline unsigned long __must_check | |
| copy_in_user(void __user *to, const void __user *from, unsigned long n) | |
| { | |
| might_fault(); | |
| return __copy_in_user(to, from, n); | |
| } | |
| /* | |
| * Copy a null terminated string from userspace. | |
| */ | |
| long __strncpy_from_user(char *dst, const char __user *src, long count); | |
| static inline long __must_check | |
| strncpy_from_user(char *dst, const char __user *src, long count) | |
| { | |
| might_fault(); | |
| return __strncpy_from_user(dst, src, count); | |
| } | |
| unsigned long __must_check __strnlen_user(const char __user *src, unsigned long count); | |
| static inline unsigned long strnlen_user(const char __user *src, unsigned long n) | |
| { | |
| might_fault(); | |
| return __strnlen_user(src, n); | |
| } | |
| /** | |
| * strlen_user: - Get the size of a string in user space. | |
| * @str: The string to measure. | |
| * | |
| * Context: User context only. This function may sleep if pagefaults are | |
| * enabled. | |
| * | |
| * Get the size of a NUL-terminated string in user space. | |
| * | |
| * Returns the size of the string INCLUDING the terminating NUL. | |
| * On exception, returns 0. | |
| * | |
| * If there is a limit on the length of a valid string, you may wish to | |
| * consider using strnlen_user() instead. | |
| */ | |
| #define strlen_user(str) strnlen_user(str, ~0UL) | |
| /* | |
| * Zero Userspace | |
| */ | |
| unsigned long __must_check __clear_user(void __user *to, unsigned long size); | |
| static inline unsigned long __must_check clear_user(void __user *to, unsigned long n) | |
| { | |
| might_fault(); | |
| return __clear_user(to, n); | |
| } | |
| int copy_to_user_real(void __user *dest, void *src, unsigned long count); | |
| void s390_kernel_write(void *dst, const void *src, size_t size); | |
| #endif /* __S390_UACCESS_H */ |