| /* | |
| * Performance event support for the System z CPU-measurement Sampling Facility | |
| * | |
| * Copyright IBM Corp. 2013 | |
| * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License (version 2 only) | |
| * as published by the Free Software Foundation. | |
| */ | |
| #define KMSG_COMPONENT "cpum_sf" | |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/perf_event.h> | |
| #include <linux/percpu.h> | |
| #include <linux/notifier.h> | |
| #include <linux/export.h> | |
| #include <linux/slab.h> | |
| #include <linux/mm.h> | |
| #include <linux/moduleparam.h> | |
| #include <asm/cpu_mf.h> | |
| #include <asm/irq.h> | |
| #include <asm/debug.h> | |
| #include <asm/timex.h> | |
| /* Minimum number of sample-data-block-tables: | |
| * At least one table is required for the sampling buffer structure. | |
| * A single table contains up to 511 pointers to sample-data-blocks. | |
| */ | |
| #define CPUM_SF_MIN_SDBT 1 | |
| /* Number of sample-data-blocks per sample-data-block-table (SDBT): | |
| * A table contains SDB pointers (8 bytes) and one table-link entry | |
| * that points to the origin of the next SDBT. | |
| */ | |
| #define CPUM_SF_SDB_PER_TABLE ((PAGE_SIZE - 8) / 8) | |
| /* Maximum page offset for an SDBT table-link entry: | |
| * If this page offset is reached, a table-link entry to the next SDBT | |
| * must be added. | |
| */ | |
| #define CPUM_SF_SDBT_TL_OFFSET (CPUM_SF_SDB_PER_TABLE * 8) | |
| static inline int require_table_link(const void *sdbt) | |
| { | |
| return ((unsigned long) sdbt & ~PAGE_MASK) == CPUM_SF_SDBT_TL_OFFSET; | |
| } | |
| /* Minimum and maximum sampling buffer sizes: | |
| * | |
| * This number represents the maximum size of the sampling buffer taking | |
| * the number of sample-data-block-tables into account. Note that these | |
| * numbers apply to the basic-sampling function only. | |
| * The maximum number of SDBs is increased by CPUM_SF_SDB_DIAG_FACTOR if | |
| * the diagnostic-sampling function is active. | |
| * | |
| * Sampling buffer size Buffer characteristics | |
| * --------------------------------------------------- | |
| * 64KB == 16 pages (4KB per page) | |
| * 1 page for SDB-tables | |
| * 15 pages for SDBs | |
| * | |
| * 32MB == 8192 pages (4KB per page) | |
| * 16 pages for SDB-tables | |
| * 8176 pages for SDBs | |
| */ | |
| static unsigned long __read_mostly CPUM_SF_MIN_SDB = 15; | |
| static unsigned long __read_mostly CPUM_SF_MAX_SDB = 8176; | |
| static unsigned long __read_mostly CPUM_SF_SDB_DIAG_FACTOR = 1; | |
| struct sf_buffer { | |
| unsigned long *sdbt; /* Sample-data-block-table origin */ | |
| /* buffer characteristics (required for buffer increments) */ | |
| unsigned long num_sdb; /* Number of sample-data-blocks */ | |
| unsigned long num_sdbt; /* Number of sample-data-block-tables */ | |
| unsigned long *tail; /* last sample-data-block-table */ | |
| }; | |
| struct cpu_hw_sf { | |
| /* CPU-measurement sampling information block */ | |
| struct hws_qsi_info_block qsi; | |
| /* CPU-measurement sampling control block */ | |
| struct hws_lsctl_request_block lsctl; | |
| struct sf_buffer sfb; /* Sampling buffer */ | |
| unsigned int flags; /* Status flags */ | |
| struct perf_event *event; /* Scheduled perf event */ | |
| }; | |
| static DEFINE_PER_CPU(struct cpu_hw_sf, cpu_hw_sf); | |
| /* Debug feature */ | |
| static debug_info_t *sfdbg; | |
| /* | |
| * sf_disable() - Switch off sampling facility | |
| */ | |
| static int sf_disable(void) | |
| { | |
| struct hws_lsctl_request_block sreq; | |
| memset(&sreq, 0, sizeof(sreq)); | |
| return lsctl(&sreq); | |
| } | |
| /* | |
| * sf_buffer_available() - Check for an allocated sampling buffer | |
| */ | |
| static int sf_buffer_available(struct cpu_hw_sf *cpuhw) | |
| { | |
| return !!cpuhw->sfb.sdbt; | |
| } | |
| /* | |
| * deallocate sampling facility buffer | |
| */ | |
| static void free_sampling_buffer(struct sf_buffer *sfb) | |
| { | |
| unsigned long *sdbt, *curr; | |
| if (!sfb->sdbt) | |
| return; | |
| sdbt = sfb->sdbt; | |
| curr = sdbt; | |
| /* Free the SDBT after all SDBs are processed... */ | |
| while (1) { | |
| if (!*curr || !sdbt) | |
| break; | |
| /* Process table-link entries */ | |
| if (is_link_entry(curr)) { | |
| curr = get_next_sdbt(curr); | |
| if (sdbt) | |
| free_page((unsigned long) sdbt); | |
| /* If the origin is reached, sampling buffer is freed */ | |
| if (curr == sfb->sdbt) | |
| break; | |
| else | |
| sdbt = curr; | |
| } else { | |
| /* Process SDB pointer */ | |
| if (*curr) { | |
| free_page(*curr); | |
| curr++; | |
| } | |
| } | |
| } | |
| debug_sprintf_event(sfdbg, 5, | |
| "free_sampling_buffer: freed sdbt=%p\n", sfb->sdbt); | |
| memset(sfb, 0, sizeof(*sfb)); | |
| } | |
| static int alloc_sample_data_block(unsigned long *sdbt, gfp_t gfp_flags) | |
| { | |
| unsigned long sdb, *trailer; | |
| /* Allocate and initialize sample-data-block */ | |
| sdb = get_zeroed_page(gfp_flags); | |
| if (!sdb) | |
| return -ENOMEM; | |
| trailer = trailer_entry_ptr(sdb); | |
| *trailer = SDB_TE_ALERT_REQ_MASK; | |
| /* Link SDB into the sample-data-block-table */ | |
| *sdbt = sdb; | |
| return 0; | |
| } | |
| /* | |
| * realloc_sampling_buffer() - extend sampler memory | |
| * | |
| * Allocates new sample-data-blocks and adds them to the specified sampling | |
| * buffer memory. | |
| * | |
| * Important: This modifies the sampling buffer and must be called when the | |
| * sampling facility is disabled. | |
| * | |
| * Returns zero on success, non-zero otherwise. | |
| */ | |
| static int realloc_sampling_buffer(struct sf_buffer *sfb, | |
| unsigned long num_sdb, gfp_t gfp_flags) | |
| { | |
| int i, rc; | |
| unsigned long *new, *tail; | |
| if (!sfb->sdbt || !sfb->tail) | |
| return -EINVAL; | |
| if (!is_link_entry(sfb->tail)) | |
| return -EINVAL; | |
| /* Append to the existing sampling buffer, overwriting the table-link | |
| * register. | |
| * The tail variables always points to the "tail" (last and table-link) | |
| * entry in an SDB-table. | |
| */ | |
| tail = sfb->tail; | |
| /* Do a sanity check whether the table-link entry points to | |
| * the sampling buffer origin. | |
| */ | |
| if (sfb->sdbt != get_next_sdbt(tail)) { | |
| debug_sprintf_event(sfdbg, 3, "realloc_sampling_buffer: " | |
| "sampling buffer is not linked: origin=%p" | |
| "tail=%p\n", | |
| (void *) sfb->sdbt, (void *) tail); | |
| return -EINVAL; | |
| } | |
| /* Allocate remaining SDBs */ | |
| rc = 0; | |
| for (i = 0; i < num_sdb; i++) { | |
| /* Allocate a new SDB-table if it is full. */ | |
| if (require_table_link(tail)) { | |
| new = (unsigned long *) get_zeroed_page(gfp_flags); | |
| if (!new) { | |
| rc = -ENOMEM; | |
| break; | |
| } | |
| sfb->num_sdbt++; | |
| /* Link current page to tail of chain */ | |
| *tail = (unsigned long)(void *) new + 1; | |
| tail = new; | |
| } | |
| /* Allocate a new sample-data-block. | |
| * If there is not enough memory, stop the realloc process | |
| * and simply use what was allocated. If this is a temporary | |
| * issue, a new realloc call (if required) might succeed. | |
| */ | |
| rc = alloc_sample_data_block(tail, gfp_flags); | |
| if (rc) | |
| break; | |
| sfb->num_sdb++; | |
| tail++; | |
| } | |
| /* Link sampling buffer to its origin */ | |
| *tail = (unsigned long) sfb->sdbt + 1; | |
| sfb->tail = tail; | |
| debug_sprintf_event(sfdbg, 4, "realloc_sampling_buffer: new buffer" | |
| " settings: sdbt=%lu sdb=%lu\n", | |
| sfb->num_sdbt, sfb->num_sdb); | |
| return rc; | |
| } | |
| /* | |
| * allocate_sampling_buffer() - allocate sampler memory | |
| * | |
| * Allocates and initializes a sampling buffer structure using the | |
| * specified number of sample-data-blocks (SDB). For each allocation, | |
| * a 4K page is used. The number of sample-data-block-tables (SDBT) | |
| * are calculated from SDBs. | |
| * Also set the ALERT_REQ mask in each SDBs trailer. | |
| * | |
| * Returns zero on success, non-zero otherwise. | |
| */ | |
| static int alloc_sampling_buffer(struct sf_buffer *sfb, unsigned long num_sdb) | |
| { | |
| int rc; | |
| if (sfb->sdbt) | |
| return -EINVAL; | |
| /* Allocate the sample-data-block-table origin */ | |
| sfb->sdbt = (unsigned long *) get_zeroed_page(GFP_KERNEL); | |
| if (!sfb->sdbt) | |
| return -ENOMEM; | |
| sfb->num_sdb = 0; | |
| sfb->num_sdbt = 1; | |
| /* Link the table origin to point to itself to prepare for | |
| * realloc_sampling_buffer() invocation. | |
| */ | |
| sfb->tail = sfb->sdbt; | |
| *sfb->tail = (unsigned long)(void *) sfb->sdbt + 1; | |
| /* Allocate requested number of sample-data-blocks */ | |
| rc = realloc_sampling_buffer(sfb, num_sdb, GFP_KERNEL); | |
| if (rc) { | |
| free_sampling_buffer(sfb); | |
| debug_sprintf_event(sfdbg, 4, "alloc_sampling_buffer: " | |
| "realloc_sampling_buffer failed with rc=%i\n", rc); | |
| } else | |
| debug_sprintf_event(sfdbg, 4, | |
| "alloc_sampling_buffer: tear=%p dear=%p\n", | |
| sfb->sdbt, (void *) *sfb->sdbt); | |
| return rc; | |
| } | |
| static void sfb_set_limits(unsigned long min, unsigned long max) | |
| { | |
| struct hws_qsi_info_block si; | |
| CPUM_SF_MIN_SDB = min; | |
| CPUM_SF_MAX_SDB = max; | |
| memset(&si, 0, sizeof(si)); | |
| if (!qsi(&si)) | |
| CPUM_SF_SDB_DIAG_FACTOR = DIV_ROUND_UP(si.dsdes, si.bsdes); | |
| } | |
| static unsigned long sfb_max_limit(struct hw_perf_event *hwc) | |
| { | |
| return SAMPL_DIAG_MODE(hwc) ? CPUM_SF_MAX_SDB * CPUM_SF_SDB_DIAG_FACTOR | |
| : CPUM_SF_MAX_SDB; | |
| } | |
| static unsigned long sfb_pending_allocs(struct sf_buffer *sfb, | |
| struct hw_perf_event *hwc) | |
| { | |
| if (!sfb->sdbt) | |
| return SFB_ALLOC_REG(hwc); | |
| if (SFB_ALLOC_REG(hwc) > sfb->num_sdb) | |
| return SFB_ALLOC_REG(hwc) - sfb->num_sdb; | |
| return 0; | |
| } | |
| static int sfb_has_pending_allocs(struct sf_buffer *sfb, | |
| struct hw_perf_event *hwc) | |
| { | |
| return sfb_pending_allocs(sfb, hwc) > 0; | |
| } | |
| static void sfb_account_allocs(unsigned long num, struct hw_perf_event *hwc) | |
| { | |
| /* Limit the number of SDBs to not exceed the maximum */ | |
| num = min_t(unsigned long, num, sfb_max_limit(hwc) - SFB_ALLOC_REG(hwc)); | |
| if (num) | |
| SFB_ALLOC_REG(hwc) += num; | |
| } | |
| static void sfb_init_allocs(unsigned long num, struct hw_perf_event *hwc) | |
| { | |
| SFB_ALLOC_REG(hwc) = 0; | |
| sfb_account_allocs(num, hwc); | |
| } | |
| static size_t event_sample_size(struct hw_perf_event *hwc) | |
| { | |
| struct sf_raw_sample *sfr = (struct sf_raw_sample *) RAWSAMPLE_REG(hwc); | |
| size_t sample_size; | |
| /* The sample size depends on the sampling function: The basic-sampling | |
| * function must be always enabled, diagnostic-sampling function is | |
| * optional. | |
| */ | |
| sample_size = sfr->bsdes; | |
| if (SAMPL_DIAG_MODE(hwc)) | |
| sample_size += sfr->dsdes; | |
| return sample_size; | |
| } | |
| static void deallocate_buffers(struct cpu_hw_sf *cpuhw) | |
| { | |
| if (cpuhw->sfb.sdbt) | |
| free_sampling_buffer(&cpuhw->sfb); | |
| } | |
| static int allocate_buffers(struct cpu_hw_sf *cpuhw, struct hw_perf_event *hwc) | |
| { | |
| unsigned long n_sdb, freq, factor; | |
| size_t sfr_size, sample_size; | |
| struct sf_raw_sample *sfr; | |
| /* Allocate raw sample buffer | |
| * | |
| * The raw sample buffer is used to temporarily store sampling data | |
| * entries for perf raw sample processing. The buffer size mainly | |
| * depends on the size of diagnostic-sampling data entries which is | |
| * machine-specific. The exact size calculation includes: | |
| * 1. The first 4 bytes of diagnostic-sampling data entries are | |
| * already reflected in the sf_raw_sample structure. Subtract | |
| * these bytes. | |
| * 2. The perf raw sample data must be 8-byte aligned (u64) and | |
| * perf's internal data size must be considered too. So add | |
| * an additional u32 for correct alignment and subtract before | |
| * allocating the buffer. | |
| * 3. Store the raw sample buffer pointer in the perf event | |
| * hardware structure. | |
| */ | |
| sfr_size = ALIGN((sizeof(*sfr) - sizeof(sfr->diag) + cpuhw->qsi.dsdes) + | |
| sizeof(u32), sizeof(u64)); | |
| sfr_size -= sizeof(u32); | |
| sfr = kzalloc(sfr_size, GFP_KERNEL); | |
| if (!sfr) | |
| return -ENOMEM; | |
| sfr->size = sfr_size; | |
| sfr->bsdes = cpuhw->qsi.bsdes; | |
| sfr->dsdes = cpuhw->qsi.dsdes; | |
| RAWSAMPLE_REG(hwc) = (unsigned long) sfr; | |
| /* Calculate sampling buffers using 4K pages | |
| * | |
| * 1. Determine the sample data size which depends on the used | |
| * sampling functions, for example, basic-sampling or | |
| * basic-sampling with diagnostic-sampling. | |
| * | |
| * 2. Use the sampling frequency as input. The sampling buffer is | |
| * designed for almost one second. This can be adjusted through | |
| * the "factor" variable. | |
| * In any case, alloc_sampling_buffer() sets the Alert Request | |
| * Control indicator to trigger a measurement-alert to harvest | |
| * sample-data-blocks (sdb). | |
| * | |
| * 3. Compute the number of sample-data-blocks and ensure a minimum | |
| * of CPUM_SF_MIN_SDB. Also ensure the upper limit does not | |
| * exceed a "calculated" maximum. The symbolic maximum is | |
| * designed for basic-sampling only and needs to be increased if | |
| * diagnostic-sampling is active. | |
| * See also the remarks for these symbolic constants. | |
| * | |
| * 4. Compute the number of sample-data-block-tables (SDBT) and | |
| * ensure a minimum of CPUM_SF_MIN_SDBT (one table can manage up | |
| * to 511 SDBs). | |
| */ | |
| sample_size = event_sample_size(hwc); | |
| freq = sample_rate_to_freq(&cpuhw->qsi, SAMPL_RATE(hwc)); | |
| factor = 1; | |
| n_sdb = DIV_ROUND_UP(freq, factor * ((PAGE_SIZE-64) / sample_size)); | |
| if (n_sdb < CPUM_SF_MIN_SDB) | |
| n_sdb = CPUM_SF_MIN_SDB; | |
| /* If there is already a sampling buffer allocated, it is very likely | |
| * that the sampling facility is enabled too. If the event to be | |
| * initialized requires a greater sampling buffer, the allocation must | |
| * be postponed. Changing the sampling buffer requires the sampling | |
| * facility to be in the disabled state. So, account the number of | |
| * required SDBs and let cpumsf_pmu_enable() resize the buffer just | |
| * before the event is started. | |
| */ | |
| sfb_init_allocs(n_sdb, hwc); | |
| if (sf_buffer_available(cpuhw)) | |
| return 0; | |
| debug_sprintf_event(sfdbg, 3, | |
| "allocate_buffers: rate=%lu f=%lu sdb=%lu/%lu" | |
| " sample_size=%lu cpuhw=%p\n", | |
| SAMPL_RATE(hwc), freq, n_sdb, sfb_max_limit(hwc), | |
| sample_size, cpuhw); | |
| return alloc_sampling_buffer(&cpuhw->sfb, | |
| sfb_pending_allocs(&cpuhw->sfb, hwc)); | |
| } | |
| static unsigned long min_percent(unsigned int percent, unsigned long base, | |
| unsigned long min) | |
| { | |
| return min_t(unsigned long, min, DIV_ROUND_UP(percent * base, 100)); | |
| } | |
| static unsigned long compute_sfb_extent(unsigned long ratio, unsigned long base) | |
| { | |
| /* Use a percentage-based approach to extend the sampling facility | |
| * buffer. Accept up to 5% sample data loss. | |
| * Vary the extents between 1% to 5% of the current number of | |
| * sample-data-blocks. | |
| */ | |
| if (ratio <= 5) | |
| return 0; | |
| if (ratio <= 25) | |
| return min_percent(1, base, 1); | |
| if (ratio <= 50) | |
| return min_percent(1, base, 1); | |
| if (ratio <= 75) | |
| return min_percent(2, base, 2); | |
| if (ratio <= 100) | |
| return min_percent(3, base, 3); | |
| if (ratio <= 250) | |
| return min_percent(4, base, 4); | |
| return min_percent(5, base, 8); | |
| } | |
| static void sfb_account_overflows(struct cpu_hw_sf *cpuhw, | |
| struct hw_perf_event *hwc) | |
| { | |
| unsigned long ratio, num; | |
| if (!OVERFLOW_REG(hwc)) | |
| return; | |
| /* The sample_overflow contains the average number of sample data | |
| * that has been lost because sample-data-blocks were full. | |
| * | |
| * Calculate the total number of sample data entries that has been | |
| * discarded. Then calculate the ratio of lost samples to total samples | |
| * per second in percent. | |
| */ | |
| ratio = DIV_ROUND_UP(100 * OVERFLOW_REG(hwc) * cpuhw->sfb.num_sdb, | |
| sample_rate_to_freq(&cpuhw->qsi, SAMPL_RATE(hwc))); | |
| /* Compute number of sample-data-blocks */ | |
| num = compute_sfb_extent(ratio, cpuhw->sfb.num_sdb); | |
| if (num) | |
| sfb_account_allocs(num, hwc); | |
| debug_sprintf_event(sfdbg, 5, "sfb: overflow: overflow=%llu ratio=%lu" | |
| " num=%lu\n", OVERFLOW_REG(hwc), ratio, num); | |
| OVERFLOW_REG(hwc) = 0; | |
| } | |
| /* extend_sampling_buffer() - Extend sampling buffer | |
| * @sfb: Sampling buffer structure (for local CPU) | |
| * @hwc: Perf event hardware structure | |
| * | |
| * Use this function to extend the sampling buffer based on the overflow counter | |
| * and postponed allocation extents stored in the specified Perf event hardware. | |
| * | |
| * Important: This function disables the sampling facility in order to safely | |
| * change the sampling buffer structure. Do not call this function | |
| * when the PMU is active. | |
| */ | |
| static void extend_sampling_buffer(struct sf_buffer *sfb, | |
| struct hw_perf_event *hwc) | |
| { | |
| unsigned long num, num_old; | |
| int rc; | |
| num = sfb_pending_allocs(sfb, hwc); | |
| if (!num) | |
| return; | |
| num_old = sfb->num_sdb; | |
| /* Disable the sampling facility to reset any states and also | |
| * clear pending measurement alerts. | |
| */ | |
| sf_disable(); | |
| /* Extend the sampling buffer. | |
| * This memory allocation typically happens in an atomic context when | |
| * called by perf. Because this is a reallocation, it is fine if the | |
| * new SDB-request cannot be satisfied immediately. | |
| */ | |
| rc = realloc_sampling_buffer(sfb, num, GFP_ATOMIC); | |
| if (rc) | |
| debug_sprintf_event(sfdbg, 5, "sfb: extend: realloc " | |
| "failed with rc=%i\n", rc); | |
| if (sfb_has_pending_allocs(sfb, hwc)) | |
| debug_sprintf_event(sfdbg, 5, "sfb: extend: " | |
| "req=%lu alloc=%lu remaining=%lu\n", | |
| num, sfb->num_sdb - num_old, | |
| sfb_pending_allocs(sfb, hwc)); | |
| } | |
| /* Number of perf events counting hardware events */ | |
| static atomic_t num_events; | |
| /* Used to avoid races in calling reserve/release_cpumf_hardware */ | |
| static DEFINE_MUTEX(pmc_reserve_mutex); | |
| #define PMC_INIT 0 | |
| #define PMC_RELEASE 1 | |
| #define PMC_FAILURE 2 | |
| static void setup_pmc_cpu(void *flags) | |
| { | |
| int err; | |
| struct cpu_hw_sf *cpusf = this_cpu_ptr(&cpu_hw_sf); | |
| err = 0; | |
| switch (*((int *) flags)) { | |
| case PMC_INIT: | |
| memset(cpusf, 0, sizeof(*cpusf)); | |
| err = qsi(&cpusf->qsi); | |
| if (err) | |
| break; | |
| cpusf->flags |= PMU_F_RESERVED; | |
| err = sf_disable(); | |
| if (err) | |
| pr_err("Switching off the sampling facility failed " | |
| "with rc=%i\n", err); | |
| debug_sprintf_event(sfdbg, 5, | |
| "setup_pmc_cpu: initialized: cpuhw=%p\n", cpusf); | |
| break; | |
| case PMC_RELEASE: | |
| cpusf->flags &= ~PMU_F_RESERVED; | |
| err = sf_disable(); | |
| if (err) { | |
| pr_err("Switching off the sampling facility failed " | |
| "with rc=%i\n", err); | |
| } else | |
| deallocate_buffers(cpusf); | |
| debug_sprintf_event(sfdbg, 5, | |
| "setup_pmc_cpu: released: cpuhw=%p\n", cpusf); | |
| break; | |
| } | |
| if (err) | |
| *((int *) flags) |= PMC_FAILURE; | |
| } | |
| static void release_pmc_hardware(void) | |
| { | |
| int flags = PMC_RELEASE; | |
| irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT); | |
| on_each_cpu(setup_pmc_cpu, &flags, 1); | |
| } | |
| static int reserve_pmc_hardware(void) | |
| { | |
| int flags = PMC_INIT; | |
| on_each_cpu(setup_pmc_cpu, &flags, 1); | |
| if (flags & PMC_FAILURE) { | |
| release_pmc_hardware(); | |
| return -ENODEV; | |
| } | |
| irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT); | |
| return 0; | |
| } | |
| static void hw_perf_event_destroy(struct perf_event *event) | |
| { | |
| /* Free raw sample buffer */ | |
| if (RAWSAMPLE_REG(&event->hw)) | |
| kfree((void *) RAWSAMPLE_REG(&event->hw)); | |
| /* Release PMC if this is the last perf event */ | |
| if (!atomic_add_unless(&num_events, -1, 1)) { | |
| mutex_lock(&pmc_reserve_mutex); | |
| if (atomic_dec_return(&num_events) == 0) | |
| release_pmc_hardware(); | |
| mutex_unlock(&pmc_reserve_mutex); | |
| } | |
| } | |
| static void hw_init_period(struct hw_perf_event *hwc, u64 period) | |
| { | |
| hwc->sample_period = period; | |
| hwc->last_period = hwc->sample_period; | |
| local64_set(&hwc->period_left, hwc->sample_period); | |
| } | |
| static void hw_reset_registers(struct hw_perf_event *hwc, | |
| unsigned long *sdbt_origin) | |
| { | |
| struct sf_raw_sample *sfr; | |
| /* (Re)set to first sample-data-block-table */ | |
| TEAR_REG(hwc) = (unsigned long) sdbt_origin; | |
| /* (Re)set raw sampling buffer register */ | |
| sfr = (struct sf_raw_sample *) RAWSAMPLE_REG(hwc); | |
| memset(&sfr->basic, 0, sizeof(sfr->basic)); | |
| memset(&sfr->diag, 0, sfr->dsdes); | |
| } | |
| static unsigned long hw_limit_rate(const struct hws_qsi_info_block *si, | |
| unsigned long rate) | |
| { | |
| return clamp_t(unsigned long, rate, | |
| si->min_sampl_rate, si->max_sampl_rate); | |
| } | |
| static int __hw_perf_event_init(struct perf_event *event) | |
| { | |
| struct cpu_hw_sf *cpuhw; | |
| struct hws_qsi_info_block si; | |
| struct perf_event_attr *attr = &event->attr; | |
| struct hw_perf_event *hwc = &event->hw; | |
| unsigned long rate; | |
| int cpu, err; | |
| /* Reserve CPU-measurement sampling facility */ | |
| err = 0; | |
| if (!atomic_inc_not_zero(&num_events)) { | |
| mutex_lock(&pmc_reserve_mutex); | |
| if (atomic_read(&num_events) == 0 && reserve_pmc_hardware()) | |
| err = -EBUSY; | |
| else | |
| atomic_inc(&num_events); | |
| mutex_unlock(&pmc_reserve_mutex); | |
| } | |
| event->destroy = hw_perf_event_destroy; | |
| if (err) | |
| goto out; | |
| /* Access per-CPU sampling information (query sampling info) */ | |
| /* | |
| * The event->cpu value can be -1 to count on every CPU, for example, | |
| * when attaching to a task. If this is specified, use the query | |
| * sampling info from the current CPU, otherwise use event->cpu to | |
| * retrieve the per-CPU information. | |
| * Later, cpuhw indicates whether to allocate sampling buffers for a | |
| * particular CPU (cpuhw!=NULL) or each online CPU (cpuw==NULL). | |
| */ | |
| memset(&si, 0, sizeof(si)); | |
| cpuhw = NULL; | |
| if (event->cpu == -1) | |
| qsi(&si); | |
| else { | |
| /* Event is pinned to a particular CPU, retrieve the per-CPU | |
| * sampling structure for accessing the CPU-specific QSI. | |
| */ | |
| cpuhw = &per_cpu(cpu_hw_sf, event->cpu); | |
| si = cpuhw->qsi; | |
| } | |
| /* Check sampling facility authorization and, if not authorized, | |
| * fall back to other PMUs. It is safe to check any CPU because | |
| * the authorization is identical for all configured CPUs. | |
| */ | |
| if (!si.as) { | |
| err = -ENOENT; | |
| goto out; | |
| } | |
| /* Always enable basic sampling */ | |
| SAMPL_FLAGS(hwc) = PERF_CPUM_SF_BASIC_MODE; | |
| /* Check if diagnostic sampling is requested. Deny if the required | |
| * sampling authorization is missing. | |
| */ | |
| if (attr->config == PERF_EVENT_CPUM_SF_DIAG) { | |
| if (!si.ad) { | |
| err = -EPERM; | |
| goto out; | |
| } | |
| SAMPL_FLAGS(hwc) |= PERF_CPUM_SF_DIAG_MODE; | |
| } | |
| /* Check and set other sampling flags */ | |
| if (attr->config1 & PERF_CPUM_SF_FULL_BLOCKS) | |
| SAMPL_FLAGS(hwc) |= PERF_CPUM_SF_FULL_BLOCKS; | |
| /* The sampling information (si) contains information about the | |
| * min/max sampling intervals and the CPU speed. So calculate the | |
| * correct sampling interval and avoid the whole period adjust | |
| * feedback loop. | |
| */ | |
| rate = 0; | |
| if (attr->freq) { | |
| rate = freq_to_sample_rate(&si, attr->sample_freq); | |
| rate = hw_limit_rate(&si, rate); | |
| attr->freq = 0; | |
| attr->sample_period = rate; | |
| } else { | |
| /* The min/max sampling rates specifies the valid range | |
| * of sample periods. If the specified sample period is | |
| * out of range, limit the period to the range boundary. | |
| */ | |
| rate = hw_limit_rate(&si, hwc->sample_period); | |
| /* The perf core maintains a maximum sample rate that is | |
| * configurable through the sysctl interface. Ensure the | |
| * sampling rate does not exceed this value. This also helps | |
| * to avoid throttling when pushing samples with | |
| * perf_event_overflow(). | |
| */ | |
| if (sample_rate_to_freq(&si, rate) > | |
| sysctl_perf_event_sample_rate) { | |
| err = -EINVAL; | |
| debug_sprintf_event(sfdbg, 1, "Sampling rate exceeds maximum perf sample rate\n"); | |
| goto out; | |
| } | |
| } | |
| SAMPL_RATE(hwc) = rate; | |
| hw_init_period(hwc, SAMPL_RATE(hwc)); | |
| /* Initialize sample data overflow accounting */ | |
| hwc->extra_reg.reg = REG_OVERFLOW; | |
| OVERFLOW_REG(hwc) = 0; | |
| /* Allocate the per-CPU sampling buffer using the CPU information | |
| * from the event. If the event is not pinned to a particular | |
| * CPU (event->cpu == -1; or cpuhw == NULL), allocate sampling | |
| * buffers for each online CPU. | |
| */ | |
| if (cpuhw) | |
| /* Event is pinned to a particular CPU */ | |
| err = allocate_buffers(cpuhw, hwc); | |
| else { | |
| /* Event is not pinned, allocate sampling buffer on | |
| * each online CPU | |
| */ | |
| for_each_online_cpu(cpu) { | |
| cpuhw = &per_cpu(cpu_hw_sf, cpu); | |
| err = allocate_buffers(cpuhw, hwc); | |
| if (err) | |
| break; | |
| } | |
| } | |
| out: | |
| return err; | |
| } | |
| static int cpumsf_pmu_event_init(struct perf_event *event) | |
| { | |
| int err; | |
| /* No support for taken branch sampling */ | |
| if (has_branch_stack(event)) | |
| return -EOPNOTSUPP; | |
| switch (event->attr.type) { | |
| case PERF_TYPE_RAW: | |
| if ((event->attr.config != PERF_EVENT_CPUM_SF) && | |
| (event->attr.config != PERF_EVENT_CPUM_SF_DIAG)) | |
| return -ENOENT; | |
| break; | |
| case PERF_TYPE_HARDWARE: | |
| /* Support sampling of CPU cycles in addition to the | |
| * counter facility. However, the counter facility | |
| * is more precise and, hence, restrict this PMU to | |
| * sampling events only. | |
| */ | |
| if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES) | |
| return -ENOENT; | |
| if (!is_sampling_event(event)) | |
| return -ENOENT; | |
| break; | |
| default: | |
| return -ENOENT; | |
| } | |
| /* Check online status of the CPU to which the event is pinned */ | |
| if (event->cpu >= nr_cpumask_bits || | |
| (event->cpu >= 0 && !cpu_online(event->cpu))) | |
| return -ENODEV; | |
| /* Force reset of idle/hv excludes regardless of what the | |
| * user requested. | |
| */ | |
| if (event->attr.exclude_hv) | |
| event->attr.exclude_hv = 0; | |
| if (event->attr.exclude_idle) | |
| event->attr.exclude_idle = 0; | |
| err = __hw_perf_event_init(event); | |
| if (unlikely(err)) | |
| if (event->destroy) | |
| event->destroy(event); | |
| return err; | |
| } | |
| static void cpumsf_pmu_enable(struct pmu *pmu) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| struct hw_perf_event *hwc; | |
| int err; | |
| if (cpuhw->flags & PMU_F_ENABLED) | |
| return; | |
| if (cpuhw->flags & PMU_F_ERR_MASK) | |
| return; | |
| /* Check whether to extent the sampling buffer. | |
| * | |
| * Two conditions trigger an increase of the sampling buffer for a | |
| * perf event: | |
| * 1. Postponed buffer allocations from the event initialization. | |
| * 2. Sampling overflows that contribute to pending allocations. | |
| * | |
| * Note that the extend_sampling_buffer() function disables the sampling | |
| * facility, but it can be fully re-enabled using sampling controls that | |
| * have been saved in cpumsf_pmu_disable(). | |
| */ | |
| if (cpuhw->event) { | |
| hwc = &cpuhw->event->hw; | |
| /* Account number of overflow-designated buffer extents */ | |
| sfb_account_overflows(cpuhw, hwc); | |
| if (sfb_has_pending_allocs(&cpuhw->sfb, hwc)) | |
| extend_sampling_buffer(&cpuhw->sfb, hwc); | |
| } | |
| /* (Re)enable the PMU and sampling facility */ | |
| cpuhw->flags |= PMU_F_ENABLED; | |
| barrier(); | |
| err = lsctl(&cpuhw->lsctl); | |
| if (err) { | |
| cpuhw->flags &= ~PMU_F_ENABLED; | |
| pr_err("Loading sampling controls failed: op=%i err=%i\n", | |
| 1, err); | |
| return; | |
| } | |
| debug_sprintf_event(sfdbg, 6, "pmu_enable: es=%i cs=%i ed=%i cd=%i " | |
| "tear=%p dear=%p\n", cpuhw->lsctl.es, cpuhw->lsctl.cs, | |
| cpuhw->lsctl.ed, cpuhw->lsctl.cd, | |
| (void *) cpuhw->lsctl.tear, (void *) cpuhw->lsctl.dear); | |
| } | |
| static void cpumsf_pmu_disable(struct pmu *pmu) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| struct hws_lsctl_request_block inactive; | |
| struct hws_qsi_info_block si; | |
| int err; | |
| if (!(cpuhw->flags & PMU_F_ENABLED)) | |
| return; | |
| if (cpuhw->flags & PMU_F_ERR_MASK) | |
| return; | |
| /* Switch off sampling activation control */ | |
| inactive = cpuhw->lsctl; | |
| inactive.cs = 0; | |
| inactive.cd = 0; | |
| err = lsctl(&inactive); | |
| if (err) { | |
| pr_err("Loading sampling controls failed: op=%i err=%i\n", | |
| 2, err); | |
| return; | |
| } | |
| /* Save state of TEAR and DEAR register contents */ | |
| if (!qsi(&si)) { | |
| /* TEAR/DEAR values are valid only if the sampling facility is | |
| * enabled. Note that cpumsf_pmu_disable() might be called even | |
| * for a disabled sampling facility because cpumsf_pmu_enable() | |
| * controls the enable/disable state. | |
| */ | |
| if (si.es) { | |
| cpuhw->lsctl.tear = si.tear; | |
| cpuhw->lsctl.dear = si.dear; | |
| } | |
| } else | |
| debug_sprintf_event(sfdbg, 3, "cpumsf_pmu_disable: " | |
| "qsi() failed with err=%i\n", err); | |
| cpuhw->flags &= ~PMU_F_ENABLED; | |
| } | |
| /* perf_exclude_event() - Filter event | |
| * @event: The perf event | |
| * @regs: pt_regs structure | |
| * @sde_regs: Sample-data-entry (sde) regs structure | |
| * | |
| * Filter perf events according to their exclude specification. | |
| * | |
| * Return non-zero if the event shall be excluded. | |
| */ | |
| static int perf_exclude_event(struct perf_event *event, struct pt_regs *regs, | |
| struct perf_sf_sde_regs *sde_regs) | |
| { | |
| if (event->attr.exclude_user && user_mode(regs)) | |
| return 1; | |
| if (event->attr.exclude_kernel && !user_mode(regs)) | |
| return 1; | |
| if (event->attr.exclude_guest && sde_regs->in_guest) | |
| return 1; | |
| if (event->attr.exclude_host && !sde_regs->in_guest) | |
| return 1; | |
| return 0; | |
| } | |
| /* perf_push_sample() - Push samples to perf | |
| * @event: The perf event | |
| * @sample: Hardware sample data | |
| * | |
| * Use the hardware sample data to create perf event sample. The sample | |
| * is the pushed to the event subsystem and the function checks for | |
| * possible event overflows. If an event overflow occurs, the PMU is | |
| * stopped. | |
| * | |
| * Return non-zero if an event overflow occurred. | |
| */ | |
| static int perf_push_sample(struct perf_event *event, struct sf_raw_sample *sfr) | |
| { | |
| int overflow; | |
| struct pt_regs regs; | |
| struct perf_sf_sde_regs *sde_regs; | |
| struct perf_sample_data data; | |
| struct perf_raw_record raw = { | |
| .frag = { | |
| .size = sfr->size, | |
| .data = sfr, | |
| }, | |
| }; | |
| /* Setup perf sample */ | |
| perf_sample_data_init(&data, 0, event->hw.last_period); | |
| data.raw = &raw; | |
| /* Setup pt_regs to look like an CPU-measurement external interrupt | |
| * using the Program Request Alert code. The regs.int_parm_long | |
| * field which is unused contains additional sample-data-entry related | |
| * indicators. | |
| */ | |
| memset(®s, 0, sizeof(regs)); | |
| regs.int_code = 0x1407; | |
| regs.int_parm = CPU_MF_INT_SF_PRA; | |
| sde_regs = (struct perf_sf_sde_regs *) ®s.int_parm_long; | |
| regs.psw.addr = sfr->basic.ia; | |
| if (sfr->basic.T) | |
| regs.psw.mask |= PSW_MASK_DAT; | |
| if (sfr->basic.W) | |
| regs.psw.mask |= PSW_MASK_WAIT; | |
| if (sfr->basic.P) | |
| regs.psw.mask |= PSW_MASK_PSTATE; | |
| switch (sfr->basic.AS) { | |
| case 0x0: | |
| regs.psw.mask |= PSW_ASC_PRIMARY; | |
| break; | |
| case 0x1: | |
| regs.psw.mask |= PSW_ASC_ACCREG; | |
| break; | |
| case 0x2: | |
| regs.psw.mask |= PSW_ASC_SECONDARY; | |
| break; | |
| case 0x3: | |
| regs.psw.mask |= PSW_ASC_HOME; | |
| break; | |
| } | |
| /* | |
| * A non-zero guest program parameter indicates a guest | |
| * sample. | |
| * Note that some early samples or samples from guests without | |
| * lpp usage would be misaccounted to the host. We use the asn | |
| * value as a heuristic to detect most of these guest samples. | |
| * If the value differs from the host hpp value, we assume | |
| * it to be a KVM guest. | |
| */ | |
| if (sfr->basic.gpp || sfr->basic.prim_asn != (u16) sfr->basic.hpp) | |
| sde_regs->in_guest = 1; | |
| overflow = 0; | |
| if (perf_exclude_event(event, ®s, sde_regs)) | |
| goto out; | |
| if (perf_event_overflow(event, &data, ®s)) { | |
| overflow = 1; | |
| event->pmu->stop(event, 0); | |
| } | |
| perf_event_update_userpage(event); | |
| out: | |
| return overflow; | |
| } | |
| static void perf_event_count_update(struct perf_event *event, u64 count) | |
| { | |
| local64_add(count, &event->count); | |
| } | |
| static int sample_format_is_valid(struct hws_combined_entry *sample, | |
| unsigned int flags) | |
| { | |
| if (likely(flags & PERF_CPUM_SF_BASIC_MODE)) | |
| /* Only basic-sampling data entries with data-entry-format | |
| * version of 0x0001 can be processed. | |
| */ | |
| if (sample->basic.def != 0x0001) | |
| return 0; | |
| if (flags & PERF_CPUM_SF_DIAG_MODE) | |
| /* The data-entry-format number of diagnostic-sampling data | |
| * entries can vary. Because diagnostic data is just passed | |
| * through, do only a sanity check on the DEF. | |
| */ | |
| if (sample->diag.def < 0x8001) | |
| return 0; | |
| return 1; | |
| } | |
| static int sample_is_consistent(struct hws_combined_entry *sample, | |
| unsigned long flags) | |
| { | |
| /* This check applies only to basic-sampling data entries of potentially | |
| * combined-sampling data entries. Invalid entries cannot be processed | |
| * by the PMU and, thus, do not deliver an associated | |
| * diagnostic-sampling data entry. | |
| */ | |
| if (unlikely(!(flags & PERF_CPUM_SF_BASIC_MODE))) | |
| return 0; | |
| /* | |
| * Samples are skipped, if they are invalid or for which the | |
| * instruction address is not predictable, i.e., the wait-state bit is | |
| * set. | |
| */ | |
| if (sample->basic.I || sample->basic.W) | |
| return 0; | |
| return 1; | |
| } | |
| static void reset_sample_slot(struct hws_combined_entry *sample, | |
| unsigned long flags) | |
| { | |
| if (likely(flags & PERF_CPUM_SF_BASIC_MODE)) | |
| sample->basic.def = 0; | |
| if (flags & PERF_CPUM_SF_DIAG_MODE) | |
| sample->diag.def = 0; | |
| } | |
| static void sfr_store_sample(struct sf_raw_sample *sfr, | |
| struct hws_combined_entry *sample) | |
| { | |
| if (likely(sfr->format & PERF_CPUM_SF_BASIC_MODE)) | |
| sfr->basic = sample->basic; | |
| if (sfr->format & PERF_CPUM_SF_DIAG_MODE) | |
| memcpy(&sfr->diag, &sample->diag, sfr->dsdes); | |
| } | |
| static void debug_sample_entry(struct hws_combined_entry *sample, | |
| struct hws_trailer_entry *te, | |
| unsigned long flags) | |
| { | |
| debug_sprintf_event(sfdbg, 4, "hw_collect_samples: Found unknown " | |
| "sampling data entry: te->f=%i basic.def=%04x (%p)" | |
| " diag.def=%04x (%p)\n", te->f, | |
| sample->basic.def, &sample->basic, | |
| (flags & PERF_CPUM_SF_DIAG_MODE) | |
| ? sample->diag.def : 0xFFFF, | |
| (flags & PERF_CPUM_SF_DIAG_MODE) | |
| ? &sample->diag : NULL); | |
| } | |
| /* hw_collect_samples() - Walk through a sample-data-block and collect samples | |
| * @event: The perf event | |
| * @sdbt: Sample-data-block table | |
| * @overflow: Event overflow counter | |
| * | |
| * Walks through a sample-data-block and collects sampling data entries that are | |
| * then pushed to the perf event subsystem. Depending on the sampling function, | |
| * there can be either basic-sampling or combined-sampling data entries. A | |
| * combined-sampling data entry consists of a basic- and a diagnostic-sampling | |
| * data entry. The sampling function is determined by the flags in the perf | |
| * event hardware structure. The function always works with a combined-sampling | |
| * data entry but ignores the the diagnostic portion if it is not available. | |
| * | |
| * Note that the implementation focuses on basic-sampling data entries and, if | |
| * such an entry is not valid, the entire combined-sampling data entry is | |
| * ignored. | |
| * | |
| * The overflow variables counts the number of samples that has been discarded | |
| * due to a perf event overflow. | |
| */ | |
| static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt, | |
| unsigned long long *overflow) | |
| { | |
| unsigned long flags = SAMPL_FLAGS(&event->hw); | |
| struct hws_combined_entry *sample; | |
| struct hws_trailer_entry *te; | |
| struct sf_raw_sample *sfr; | |
| size_t sample_size; | |
| /* Prepare and initialize raw sample data */ | |
| sfr = (struct sf_raw_sample *) RAWSAMPLE_REG(&event->hw); | |
| sfr->format = flags & PERF_CPUM_SF_MODE_MASK; | |
| sample_size = event_sample_size(&event->hw); | |
| te = (struct hws_trailer_entry *) trailer_entry_ptr(*sdbt); | |
| sample = (struct hws_combined_entry *) *sdbt; | |
| while ((unsigned long *) sample < (unsigned long *) te) { | |
| /* Check for an empty sample */ | |
| if (!sample->basic.def) | |
| break; | |
| /* Update perf event period */ | |
| perf_event_count_update(event, SAMPL_RATE(&event->hw)); | |
| /* Check sampling data entry */ | |
| if (sample_format_is_valid(sample, flags)) { | |
| /* If an event overflow occurred, the PMU is stopped to | |
| * throttle event delivery. Remaining sample data is | |
| * discarded. | |
| */ | |
| if (!*overflow) { | |
| if (sample_is_consistent(sample, flags)) { | |
| /* Deliver sample data to perf */ | |
| sfr_store_sample(sfr, sample); | |
| *overflow = perf_push_sample(event, sfr); | |
| } | |
| } else | |
| /* Count discarded samples */ | |
| *overflow += 1; | |
| } else { | |
| debug_sample_entry(sample, te, flags); | |
| /* Sample slot is not yet written or other record. | |
| * | |
| * This condition can occur if the buffer was reused | |
| * from a combined basic- and diagnostic-sampling. | |
| * If only basic-sampling is then active, entries are | |
| * written into the larger diagnostic entries. | |
| * This is typically the case for sample-data-blocks | |
| * that are not full. Stop processing if the first | |
| * invalid format was detected. | |
| */ | |
| if (!te->f) | |
| break; | |
| } | |
| /* Reset sample slot and advance to next sample */ | |
| reset_sample_slot(sample, flags); | |
| sample += sample_size; | |
| } | |
| } | |
| /* hw_perf_event_update() - Process sampling buffer | |
| * @event: The perf event | |
| * @flush_all: Flag to also flush partially filled sample-data-blocks | |
| * | |
| * Processes the sampling buffer and create perf event samples. | |
| * The sampling buffer position are retrieved and saved in the TEAR_REG | |
| * register of the specified perf event. | |
| * | |
| * Only full sample-data-blocks are processed. Specify the flash_all flag | |
| * to also walk through partially filled sample-data-blocks. It is ignored | |
| * if PERF_CPUM_SF_FULL_BLOCKS is set. The PERF_CPUM_SF_FULL_BLOCKS flag | |
| * enforces the processing of full sample-data-blocks only (trailer entries | |
| * with the block-full-indicator bit set). | |
| */ | |
| static void hw_perf_event_update(struct perf_event *event, int flush_all) | |
| { | |
| struct hw_perf_event *hwc = &event->hw; | |
| struct hws_trailer_entry *te; | |
| unsigned long *sdbt; | |
| unsigned long long event_overflow, sampl_overflow, num_sdb, te_flags; | |
| int done; | |
| if (flush_all && SDB_FULL_BLOCKS(hwc)) | |
| flush_all = 0; | |
| sdbt = (unsigned long *) TEAR_REG(hwc); | |
| done = event_overflow = sampl_overflow = num_sdb = 0; | |
| while (!done) { | |
| /* Get the trailer entry of the sample-data-block */ | |
| te = (struct hws_trailer_entry *) trailer_entry_ptr(*sdbt); | |
| /* Leave loop if no more work to do (block full indicator) */ | |
| if (!te->f) { | |
| done = 1; | |
| if (!flush_all) | |
| break; | |
| } | |
| /* Check the sample overflow count */ | |
| if (te->overflow) | |
| /* Account sample overflows and, if a particular limit | |
| * is reached, extend the sampling buffer. | |
| * For details, see sfb_account_overflows(). | |
| */ | |
| sampl_overflow += te->overflow; | |
| /* Timestamps are valid for full sample-data-blocks only */ | |
| debug_sprintf_event(sfdbg, 6, "hw_perf_event_update: sdbt=%p " | |
| "overflow=%llu timestamp=0x%llx\n", | |
| sdbt, te->overflow, | |
| (te->f) ? trailer_timestamp(te) : 0ULL); | |
| /* Collect all samples from a single sample-data-block and | |
| * flag if an (perf) event overflow happened. If so, the PMU | |
| * is stopped and remaining samples will be discarded. | |
| */ | |
| hw_collect_samples(event, sdbt, &event_overflow); | |
| num_sdb++; | |
| /* Reset trailer (using compare-double-and-swap) */ | |
| do { | |
| te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK; | |
| te_flags |= SDB_TE_ALERT_REQ_MASK; | |
| } while (!cmpxchg_double(&te->flags, &te->overflow, | |
| te->flags, te->overflow, | |
| te_flags, 0ULL)); | |
| /* Advance to next sample-data-block */ | |
| sdbt++; | |
| if (is_link_entry(sdbt)) | |
| sdbt = get_next_sdbt(sdbt); | |
| /* Update event hardware registers */ | |
| TEAR_REG(hwc) = (unsigned long) sdbt; | |
| /* Stop processing sample-data if all samples of the current | |
| * sample-data-block were flushed even if it was not full. | |
| */ | |
| if (flush_all && done) | |
| break; | |
| /* If an event overflow happened, discard samples by | |
| * processing any remaining sample-data-blocks. | |
| */ | |
| if (event_overflow) | |
| flush_all = 1; | |
| } | |
| /* Account sample overflows in the event hardware structure */ | |
| if (sampl_overflow) | |
| OVERFLOW_REG(hwc) = DIV_ROUND_UP(OVERFLOW_REG(hwc) + | |
| sampl_overflow, 1 + num_sdb); | |
| if (sampl_overflow || event_overflow) | |
| debug_sprintf_event(sfdbg, 4, "hw_perf_event_update: " | |
| "overflow stats: sample=%llu event=%llu\n", | |
| sampl_overflow, event_overflow); | |
| } | |
| static void cpumsf_pmu_read(struct perf_event *event) | |
| { | |
| /* Nothing to do ... updates are interrupt-driven */ | |
| } | |
| /* Activate sampling control. | |
| * Next call of pmu_enable() starts sampling. | |
| */ | |
| static void cpumsf_pmu_start(struct perf_event *event, int flags) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED))) | |
| return; | |
| if (flags & PERF_EF_RELOAD) | |
| WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE)); | |
| perf_pmu_disable(event->pmu); | |
| event->hw.state = 0; | |
| cpuhw->lsctl.cs = 1; | |
| if (SAMPL_DIAG_MODE(&event->hw)) | |
| cpuhw->lsctl.cd = 1; | |
| perf_pmu_enable(event->pmu); | |
| } | |
| /* Deactivate sampling control. | |
| * Next call of pmu_enable() stops sampling. | |
| */ | |
| static void cpumsf_pmu_stop(struct perf_event *event, int flags) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| if (event->hw.state & PERF_HES_STOPPED) | |
| return; | |
| perf_pmu_disable(event->pmu); | |
| cpuhw->lsctl.cs = 0; | |
| cpuhw->lsctl.cd = 0; | |
| event->hw.state |= PERF_HES_STOPPED; | |
| if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) { | |
| hw_perf_event_update(event, 1); | |
| event->hw.state |= PERF_HES_UPTODATE; | |
| } | |
| perf_pmu_enable(event->pmu); | |
| } | |
| static int cpumsf_pmu_add(struct perf_event *event, int flags) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| int err; | |
| if (cpuhw->flags & PMU_F_IN_USE) | |
| return -EAGAIN; | |
| if (!cpuhw->sfb.sdbt) | |
| return -EINVAL; | |
| err = 0; | |
| perf_pmu_disable(event->pmu); | |
| event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED; | |
| /* Set up sampling controls. Always program the sampling register | |
| * using the SDB-table start. Reset TEAR_REG event hardware register | |
| * that is used by hw_perf_event_update() to store the sampling buffer | |
| * position after samples have been flushed. | |
| */ | |
| cpuhw->lsctl.s = 0; | |
| cpuhw->lsctl.h = 1; | |
| cpuhw->lsctl.tear = (unsigned long) cpuhw->sfb.sdbt; | |
| cpuhw->lsctl.dear = *(unsigned long *) cpuhw->sfb.sdbt; | |
| cpuhw->lsctl.interval = SAMPL_RATE(&event->hw); | |
| hw_reset_registers(&event->hw, cpuhw->sfb.sdbt); | |
| /* Ensure sampling functions are in the disabled state. If disabled, | |
| * switch on sampling enable control. */ | |
| if (WARN_ON_ONCE(cpuhw->lsctl.es == 1 || cpuhw->lsctl.ed == 1)) { | |
| err = -EAGAIN; | |
| goto out; | |
| } | |
| cpuhw->lsctl.es = 1; | |
| if (SAMPL_DIAG_MODE(&event->hw)) | |
| cpuhw->lsctl.ed = 1; | |
| /* Set in_use flag and store event */ | |
| cpuhw->event = event; | |
| cpuhw->flags |= PMU_F_IN_USE; | |
| if (flags & PERF_EF_START) | |
| cpumsf_pmu_start(event, PERF_EF_RELOAD); | |
| out: | |
| perf_event_update_userpage(event); | |
| perf_pmu_enable(event->pmu); | |
| return err; | |
| } | |
| static void cpumsf_pmu_del(struct perf_event *event, int flags) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| perf_pmu_disable(event->pmu); | |
| cpumsf_pmu_stop(event, PERF_EF_UPDATE); | |
| cpuhw->lsctl.es = 0; | |
| cpuhw->lsctl.ed = 0; | |
| cpuhw->flags &= ~PMU_F_IN_USE; | |
| cpuhw->event = NULL; | |
| perf_event_update_userpage(event); | |
| perf_pmu_enable(event->pmu); | |
| } | |
| CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC, PERF_EVENT_CPUM_SF); | |
| CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC_DIAG, PERF_EVENT_CPUM_SF_DIAG); | |
| static struct attribute *cpumsf_pmu_events_attr[] = { | |
| CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC), | |
| NULL, | |
| NULL, | |
| }; | |
| PMU_FORMAT_ATTR(event, "config:0-63"); | |
| static struct attribute *cpumsf_pmu_format_attr[] = { | |
| &format_attr_event.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group cpumsf_pmu_events_group = { | |
| .name = "events", | |
| .attrs = cpumsf_pmu_events_attr, | |
| }; | |
| static struct attribute_group cpumsf_pmu_format_group = { | |
| .name = "format", | |
| .attrs = cpumsf_pmu_format_attr, | |
| }; | |
| static const struct attribute_group *cpumsf_pmu_attr_groups[] = { | |
| &cpumsf_pmu_events_group, | |
| &cpumsf_pmu_format_group, | |
| NULL, | |
| }; | |
| static struct pmu cpumf_sampling = { | |
| .pmu_enable = cpumsf_pmu_enable, | |
| .pmu_disable = cpumsf_pmu_disable, | |
| .event_init = cpumsf_pmu_event_init, | |
| .add = cpumsf_pmu_add, | |
| .del = cpumsf_pmu_del, | |
| .start = cpumsf_pmu_start, | |
| .stop = cpumsf_pmu_stop, | |
| .read = cpumsf_pmu_read, | |
| .attr_groups = cpumsf_pmu_attr_groups, | |
| }; | |
| static void cpumf_measurement_alert(struct ext_code ext_code, | |
| unsigned int alert, unsigned long unused) | |
| { | |
| struct cpu_hw_sf *cpuhw; | |
| if (!(alert & CPU_MF_INT_SF_MASK)) | |
| return; | |
| inc_irq_stat(IRQEXT_CMS); | |
| cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| /* Measurement alerts are shared and might happen when the PMU | |
| * is not reserved. Ignore these alerts in this case. */ | |
| if (!(cpuhw->flags & PMU_F_RESERVED)) | |
| return; | |
| /* The processing below must take care of multiple alert events that | |
| * might be indicated concurrently. */ | |
| /* Program alert request */ | |
| if (alert & CPU_MF_INT_SF_PRA) { | |
| if (cpuhw->flags & PMU_F_IN_USE) | |
| hw_perf_event_update(cpuhw->event, 0); | |
| else | |
| WARN_ON_ONCE(!(cpuhw->flags & PMU_F_IN_USE)); | |
| } | |
| /* Report measurement alerts only for non-PRA codes */ | |
| if (alert != CPU_MF_INT_SF_PRA) | |
| debug_sprintf_event(sfdbg, 6, "measurement alert: 0x%x\n", alert); | |
| /* Sampling authorization change request */ | |
| if (alert & CPU_MF_INT_SF_SACA) | |
| qsi(&cpuhw->qsi); | |
| /* Loss of sample data due to high-priority machine activities */ | |
| if (alert & CPU_MF_INT_SF_LSDA) { | |
| pr_err("Sample data was lost\n"); | |
| cpuhw->flags |= PMU_F_ERR_LSDA; | |
| sf_disable(); | |
| } | |
| /* Invalid sampling buffer entry */ | |
| if (alert & (CPU_MF_INT_SF_IAE|CPU_MF_INT_SF_ISE)) { | |
| pr_err("A sampling buffer entry is incorrect (alert=0x%x)\n", | |
| alert); | |
| cpuhw->flags |= PMU_F_ERR_IBE; | |
| sf_disable(); | |
| } | |
| } | |
| static int cpusf_pmu_setup(unsigned int cpu, int flags) | |
| { | |
| /* Ignore the notification if no events are scheduled on the PMU. | |
| * This might be racy... | |
| */ | |
| if (!atomic_read(&num_events)) | |
| return 0; | |
| local_irq_disable(); | |
| setup_pmc_cpu(&flags); | |
| local_irq_enable(); | |
| return 0; | |
| } | |
| static int s390_pmu_sf_online_cpu(unsigned int cpu) | |
| { | |
| return cpusf_pmu_setup(cpu, PMC_INIT); | |
| } | |
| static int s390_pmu_sf_offline_cpu(unsigned int cpu) | |
| { | |
| return cpusf_pmu_setup(cpu, PMC_RELEASE); | |
| } | |
| static int param_get_sfb_size(char *buffer, const struct kernel_param *kp) | |
| { | |
| if (!cpum_sf_avail()) | |
| return -ENODEV; | |
| return sprintf(buffer, "%lu,%lu", CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB); | |
| } | |
| static int param_set_sfb_size(const char *val, const struct kernel_param *kp) | |
| { | |
| int rc; | |
| unsigned long min, max; | |
| if (!cpum_sf_avail()) | |
| return -ENODEV; | |
| if (!val || !strlen(val)) | |
| return -EINVAL; | |
| /* Valid parameter values: "min,max" or "max" */ | |
| min = CPUM_SF_MIN_SDB; | |
| max = CPUM_SF_MAX_SDB; | |
| if (strchr(val, ',')) | |
| rc = (sscanf(val, "%lu,%lu", &min, &max) == 2) ? 0 : -EINVAL; | |
| else | |
| rc = kstrtoul(val, 10, &max); | |
| if (min < 2 || min >= max || max > get_num_physpages()) | |
| rc = -EINVAL; | |
| if (rc) | |
| return rc; | |
| sfb_set_limits(min, max); | |
| pr_info("The sampling buffer limits have changed to: " | |
| "min=%lu max=%lu (diag=x%lu)\n", | |
| CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB, CPUM_SF_SDB_DIAG_FACTOR); | |
| return 0; | |
| } | |
| #define param_check_sfb_size(name, p) __param_check(name, p, void) | |
| static const struct kernel_param_ops param_ops_sfb_size = { | |
| .set = param_set_sfb_size, | |
| .get = param_get_sfb_size, | |
| }; | |
| #define RS_INIT_FAILURE_QSI 0x0001 | |
| #define RS_INIT_FAILURE_BSDES 0x0002 | |
| #define RS_INIT_FAILURE_ALRT 0x0003 | |
| #define RS_INIT_FAILURE_PERF 0x0004 | |
| static void __init pr_cpumsf_err(unsigned int reason) | |
| { | |
| pr_err("Sampling facility support for perf is not available: " | |
| "reason=%04x\n", reason); | |
| } | |
| static int __init init_cpum_sampling_pmu(void) | |
| { | |
| struct hws_qsi_info_block si; | |
| int err; | |
| if (!cpum_sf_avail()) | |
| return -ENODEV; | |
| memset(&si, 0, sizeof(si)); | |
| if (qsi(&si)) { | |
| pr_cpumsf_err(RS_INIT_FAILURE_QSI); | |
| return -ENODEV; | |
| } | |
| if (si.bsdes != sizeof(struct hws_basic_entry)) { | |
| pr_cpumsf_err(RS_INIT_FAILURE_BSDES); | |
| return -EINVAL; | |
| } | |
| if (si.ad) { | |
| sfb_set_limits(CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB); | |
| cpumsf_pmu_events_attr[1] = | |
| CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC_DIAG); | |
| } | |
| sfdbg = debug_register(KMSG_COMPONENT, 2, 1, 80); | |
| if (!sfdbg) | |
| pr_err("Registering for s390dbf failed\n"); | |
| debug_register_view(sfdbg, &debug_sprintf_view); | |
| err = register_external_irq(EXT_IRQ_MEASURE_ALERT, | |
| cpumf_measurement_alert); | |
| if (err) { | |
| pr_cpumsf_err(RS_INIT_FAILURE_ALRT); | |
| goto out; | |
| } | |
| err = perf_pmu_register(&cpumf_sampling, "cpum_sf", PERF_TYPE_RAW); | |
| if (err) { | |
| pr_cpumsf_err(RS_INIT_FAILURE_PERF); | |
| unregister_external_irq(EXT_IRQ_MEASURE_ALERT, | |
| cpumf_measurement_alert); | |
| goto out; | |
| } | |
| cpuhp_setup_state(CPUHP_AP_PERF_S390_SF_ONLINE, "AP_PERF_S390_SF_ONLINE", | |
| s390_pmu_sf_online_cpu, s390_pmu_sf_offline_cpu); | |
| out: | |
| return err; | |
| } | |
| arch_initcall(init_cpum_sampling_pmu); | |
| core_param(cpum_sfb_size, CPUM_SF_MAX_SDB, sfb_size, 0640); |