| menu "Board support" | |
| config SOLUTION_ENGINE | |
| bool | |
| config SH_ALPHA_BOARD | |
| bool | |
| config SH_DEVICE_TREE | |
| bool "Board Described by Device Tree" | |
| select OF | |
| select OF_EARLY_FLATTREE | |
| select CLKSRC_OF | |
| select COMMON_CLK | |
| select GENERIC_CALIBRATE_DELAY | |
| help | |
| Select Board Described by Device Tree to build a kernel that | |
| does not hard-code any board-specific knowledge but instead uses | |
| a device tree blob provided by the boot-loader. You must enable | |
| drivers for any hardware you want to use separately. At this | |
| time, only boards based on the open-hardware J-Core processors | |
| have sufficient driver coverage to use this option; do not | |
| select it if you are using original SuperH hardware. | |
| config SH_JCORE_SOC | |
| bool "J-Core SoC" | |
| depends on SH_DEVICE_TREE && (CPU_SH2 || CPU_J2) | |
| select CLKSRC_JCORE_PIT | |
| select JCORE_AIC | |
| default y if CPU_J2 | |
| help | |
| Select this option to include drivers core components of the | |
| J-Core SoC, including interrupt controllers and timers. | |
| config SH_SOLUTION_ENGINE | |
| bool "SolutionEngine" | |
| select SOLUTION_ENGINE | |
| select CPU_HAS_IPR_IRQ | |
| depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ | |
| CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ | |
| CPU_SUBTYPE_SH7750R | |
| help | |
| Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, | |
| SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. | |
| config SH_7206_SOLUTION_ENGINE | |
| bool "SolutionEngine7206" | |
| select SOLUTION_ENGINE | |
| depends on CPU_SUBTYPE_SH7206 | |
| help | |
| Select 7206 SolutionEngine if configuring for a Hitachi SH7206 | |
| evaluation board. | |
| config SH_7619_SOLUTION_ENGINE | |
| bool "SolutionEngine7619" | |
| select SOLUTION_ENGINE | |
| depends on CPU_SUBTYPE_SH7619 | |
| help | |
| Select 7619 SolutionEngine if configuring for a Hitachi SH7619 | |
| evaluation board. | |
| config SH_7721_SOLUTION_ENGINE | |
| bool "SolutionEngine7721" | |
| select SOLUTION_ENGINE | |
| depends on CPU_SUBTYPE_SH7721 | |
| help | |
| Select 7721 SolutionEngine if configuring for a Hitachi SH7721 | |
| evaluation board. | |
| config SH_7722_SOLUTION_ENGINE | |
| bool "SolutionEngine7722" | |
| select SOLUTION_ENGINE | |
| select GENERIC_IRQ_CHIP | |
| select IRQ_DOMAIN | |
| depends on CPU_SUBTYPE_SH7722 | |
| help | |
| Select 7722 SolutionEngine if configuring for a Hitachi SH772 | |
| evaluation board. | |
| config SH_7724_SOLUTION_ENGINE | |
| bool "SolutionEngine7724" | |
| select SOLUTION_ENGINE | |
| depends on CPU_SUBTYPE_SH7724 | |
| select GPIOLIB | |
| select SND_SOC_AK4642 if SND_SIMPLE_CARD | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| help | |
| Select 7724 SolutionEngine if configuring for a Hitachi SH7724 | |
| evaluation board. | |
| config SH_7751_SOLUTION_ENGINE | |
| bool "SolutionEngine7751" | |
| select SOLUTION_ENGINE | |
| select CPU_HAS_IPR_IRQ | |
| depends on CPU_SUBTYPE_SH7751 | |
| help | |
| Select 7751 SolutionEngine if configuring for a Hitachi SH7751 | |
| evaluation board. | |
| config SH_7780_SOLUTION_ENGINE | |
| bool "SolutionEngine7780" | |
| select SOLUTION_ENGINE | |
| select SYS_SUPPORTS_PCI | |
| depends on CPU_SUBTYPE_SH7780 | |
| help | |
| Select 7780 SolutionEngine if configuring for a Renesas SH7780 | |
| evaluation board. | |
| config SH_7343_SOLUTION_ENGINE | |
| bool "SolutionEngine7343" | |
| select SOLUTION_ENGINE | |
| select GENERIC_IRQ_CHIP | |
| select IRQ_DOMAIN | |
| depends on CPU_SUBTYPE_SH7343 | |
| help | |
| Select 7343 SolutionEngine if configuring for a Hitachi | |
| SH7343 (SH-Mobile 3AS) evaluation board. | |
| config SH_HP6XX | |
| bool "HP6XX" | |
| select SYS_SUPPORTS_APM_EMULATION | |
| select HD6446X_SERIES | |
| depends on CPU_SUBTYPE_SH7709 | |
| help | |
| Select HP6XX if configuring for a HP jornada HP6xx. | |
| More information (hardware only) at | |
| <http://www.hp.com/jornada/>. | |
| config SH_DREAMCAST | |
| bool "Dreamcast" | |
| select SYS_SUPPORTS_PCI | |
| depends on CPU_SUBTYPE_SH7091 | |
| help | |
| Select Dreamcast if configuring for a SEGA Dreamcast. | |
| More information at <http://www.linux-sh.org> | |
| config SH_SH03 | |
| bool "Interface CTP/PCI-SH03" | |
| depends on CPU_SUBTYPE_SH7751 | |
| select CPU_HAS_IPR_IRQ | |
| select SYS_SUPPORTS_PCI | |
| help | |
| CTP/PCI-SH03 is a CPU module computer that is produced | |
| by Interface Corporation. | |
| More information at <http://www.interface.co.jp> | |
| config SH_SECUREEDGE5410 | |
| bool "SecureEdge5410" | |
| depends on CPU_SUBTYPE_SH7751R | |
| select CPU_HAS_IPR_IRQ | |
| select SYS_SUPPORTS_PCI | |
| help | |
| Select SecureEdge5410 if configuring for a SnapGear SH board. | |
| This includes both the OEM SecureEdge products as well as the | |
| SME product line. | |
| config SH_RTS7751R2D | |
| bool "RTS7751R2D" | |
| depends on CPU_SUBTYPE_SH7751R | |
| select SYS_SUPPORTS_PCI | |
| select IO_TRAPPED if MMU | |
| help | |
| Select RTS7751R2D if configuring for a Renesas Technology | |
| Sales SH-Graphics board. | |
| config SH_RSK | |
| bool "Renesas Starter Kit" | |
| depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ | |
| CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| help | |
| Select this option if configuring for any of the RSK+ MCU | |
| evaluation platforms. | |
| config SH_SDK7780 | |
| bool "SDK7780R3" | |
| depends on CPU_SUBTYPE_SH7780 | |
| select SYS_SUPPORTS_PCI | |
| help | |
| Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 | |
| evaluation board. | |
| config SH_SDK7786 | |
| bool "SDK7786" | |
| depends on CPU_SUBTYPE_SH7786 | |
| select SYS_SUPPORTS_PCI | |
| select NO_IOPORT_MAP if !PCI | |
| select HAVE_SRAM_POOL | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| help | |
| Select SDK7786 if configuring for a Renesas Technology Europe | |
| SH7786-65nm board. | |
| config SH_HIGHLANDER | |
| bool "Highlander" | |
| depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 | |
| select SYS_SUPPORTS_PCI | |
| select IO_TRAPPED if MMU | |
| config SH_SH7757LCR | |
| bool "SH7757LCR" | |
| depends on CPU_SUBTYPE_SH7757 | |
| select GPIOLIB | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| config SH_SH7785LCR | |
| bool "SH7785LCR" | |
| depends on CPU_SUBTYPE_SH7785 | |
| select SYS_SUPPORTS_PCI | |
| config SH_SH7785LCR_29BIT_PHYSMAPS | |
| bool "SH7785LCR 29bit physmaps" | |
| depends on SH_SH7785LCR && 29BIT | |
| default y | |
| help | |
| This board has 2 physical memory maps. It can be changed with | |
| DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, | |
| you can access all on-board device in 29bit address mode. | |
| config SH_SH7785LCR_PT | |
| bool "SH7785LCR prototype board on 32-bit MMU mode" | |
| depends on SH_SH7785LCR && 32BIT | |
| default n | |
| help | |
| If you use prototype board, this option is enabled. | |
| config SH_URQUELL | |
| bool "Urquell" | |
| depends on CPU_SUBTYPE_SH7786 | |
| select GPIOLIB | |
| select SYS_SUPPORTS_PCI | |
| select NO_IOPORT_MAP if !PCI | |
| config SH_MIGOR | |
| bool "Migo-R" | |
| depends on CPU_SUBTYPE_SH7722 | |
| select GPIOLIB | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| help | |
| Select Migo-R if configuring for the SH7722 Migo-R platform | |
| by Renesas System Solutions Asia Pte. Ltd. | |
| config SH_AP325RXA | |
| bool "AP-325RXA" | |
| depends on CPU_SUBTYPE_SH7723 | |
| select GPIOLIB | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| help | |
| Renesas "AP-325RXA" support. | |
| Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" | |
| config SH_KFR2R09 | |
| bool "KFR2R09" | |
| depends on CPU_SUBTYPE_SH7724 | |
| select GPIOLIB | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| help | |
| "Kit For R2R for 2009" support. | |
| config SH_ECOVEC | |
| bool "EcoVec" | |
| depends on CPU_SUBTYPE_SH7724 | |
| select GPIOLIB | |
| select SND_SOC_DA7210 if SND_SIMPLE_CARD | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| help | |
| Renesas "R0P7724LC0011/21RL (EcoVec)" support. | |
| config SH_SH7763RDP | |
| bool "SH7763RDP" | |
| depends on CPU_SUBTYPE_SH7763 | |
| help | |
| Select SH7763RDP if configuring for a Renesas SH7763 | |
| evaluation board. | |
| config SH_ESPT | |
| bool "ESPT" | |
| depends on CPU_SUBTYPE_SH7763 | |
| help | |
| Select ESPT if configuring for a Renesas SH7763 | |
| with gigabit ether evaluation board. | |
| config SH_EDOSK7705 | |
| bool "EDOSK7705" | |
| depends on CPU_SUBTYPE_SH7705 | |
| config SH_EDOSK7760 | |
| bool "EDOSK7760" | |
| depends on CPU_SUBTYPE_SH7760 | |
| help | |
| Select if configuring for a Renesas EDOSK7760 | |
| evaluation board. | |
| config SH_SH4202_MICRODEV | |
| bool "SH4-202 MicroDev" | |
| depends on CPU_SUBTYPE_SH4_202 | |
| help | |
| Select SH4-202 MicroDev if configuring for a SuperH MicroDev board | |
| with an SH4-202 CPU. | |
| config SH_LANDISK | |
| bool "LANDISK" | |
| depends on CPU_SUBTYPE_SH7751R | |
| select SYS_SUPPORTS_PCI | |
| help | |
| I-O DATA DEVICE, INC. "LANDISK Series" support. | |
| config SH_TITAN | |
| bool "TITAN" | |
| depends on CPU_SUBTYPE_SH7751R | |
| select CPU_HAS_IPR_IRQ | |
| select SYS_SUPPORTS_PCI | |
| help | |
| Select Titan if you are configuring for a Nimble Microsystems | |
| NetEngine NP51R. | |
| config SH_SHMIN | |
| bool "SHMIN" | |
| depends on CPU_SUBTYPE_SH7706 | |
| select CPU_HAS_IPR_IRQ | |
| help | |
| Select SHMIN if configuring for the SHMIN board. | |
| config SH_LBOX_RE2 | |
| bool "L-BOX RE2" | |
| depends on CPU_SUBTYPE_SH7751R | |
| select SYS_SUPPORTS_PCI | |
| help | |
| Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. | |
| config SH_X3PROTO | |
| bool "SH-X3 Prototype board" | |
| depends on CPU_SUBTYPE_SHX3 | |
| select NO_IOPORT_MAP if !PCI | |
| select IRQ_DOMAIN | |
| config SH_MAGIC_PANEL_R2 | |
| bool "Magic Panel R2" | |
| depends on CPU_SUBTYPE_SH7720 | |
| select GPIOLIB | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| help | |
| Select Magic Panel R2 if configuring for Magic Panel R2. | |
| config SH_CAYMAN | |
| bool "Hitachi Cayman" | |
| depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 | |
| select SYS_SUPPORTS_PCI | |
| select ARCH_MIGHT_HAVE_PC_SERIO | |
| config SH_POLARIS | |
| bool "SMSC Polaris" | |
| select CPU_HAS_IPR_IRQ | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| depends on CPU_SUBTYPE_SH7709 | |
| help | |
| Select if configuring for an SMSC Polaris development board | |
| config SH_SH2007 | |
| bool "SH-2007 board" | |
| select NO_IOPORT_MAP | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| depends on CPU_SUBTYPE_SH7780 | |
| help | |
| SH-2007 is a single-board computer based around SH7780 chip | |
| intended for embedded applications. | |
| It has an Ethernet interface (SMC9118), direct connected | |
| Compact Flash socket, two serial ports and PC-104 bus. | |
| More information at <http://sh2000.sh-linux.org>. | |
| config SH_APSH4A3A | |
| bool "AP-SH4A-3A" | |
| select SH_ALPHA_BOARD | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| depends on CPU_SUBTYPE_SH7785 | |
| help | |
| Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. | |
| config SH_APSH4AD0A | |
| bool "AP-SH4AD-0A" | |
| select SH_ALPHA_BOARD | |
| select SYS_SUPPORTS_PCI | |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR | |
| depends on CPU_SUBTYPE_SH7786 | |
| help | |
| Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. | |
| source "arch/sh/boards/mach-r2d/Kconfig" | |
| source "arch/sh/boards/mach-highlander/Kconfig" | |
| source "arch/sh/boards/mach-sdk7780/Kconfig" | |
| source "arch/sh/boards/mach-migor/Kconfig" | |
| source "arch/sh/boards/mach-rsk/Kconfig" | |
| if SH_MAGIC_PANEL_R2 | |
| menu "Magic Panel R2 options" | |
| config SH_MAGIC_PANEL_R2_VERSION | |
| int "Magic Panel R2 Version" | |
| default "3" | |
| help | |
| Set the version of the Magic Panel R2 | |
| endmenu | |
| endif | |
| endmenu |