| /* floppy.h: Sparc specific parts of the Floppy driver. | |
| * | |
| * Copyright (C) 1996, 2007, 2008 David S. Miller (davem@davemloft.net) | |
| * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) | |
| * | |
| * Ultra/PCI support added: Sep 1997 Eddie C. Dost (ecd@skynet.be) | |
| */ | |
| #ifndef __ASM_SPARC64_FLOPPY_H | |
| #define __ASM_SPARC64_FLOPPY_H | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/dma-mapping.h> | |
| #include <asm/auxio.h> | |
| /* | |
| * Define this to enable exchanging drive 0 and 1 if only drive 1 is | |
| * probed on PCI machines. | |
| */ | |
| #undef PCI_FDC_SWAP_DRIVES | |
| /* References: | |
| * 1) Netbsd Sun floppy driver. | |
| * 2) NCR 82077 controller manual | |
| * 3) Intel 82077 controller manual | |
| */ | |
| struct sun_flpy_controller { | |
| volatile unsigned char status1_82077; /* Auxiliary Status reg. 1 */ | |
| volatile unsigned char status2_82077; /* Auxiliary Status reg. 2 */ | |
| volatile unsigned char dor_82077; /* Digital Output reg. */ | |
| volatile unsigned char tapectl_82077; /* Tape Control reg */ | |
| volatile unsigned char status_82077; /* Main Status Register. */ | |
| #define drs_82077 status_82077 /* Digital Rate Select reg. */ | |
| volatile unsigned char data_82077; /* Data fifo. */ | |
| volatile unsigned char ___unused; | |
| volatile unsigned char dir_82077; /* Digital Input reg. */ | |
| #define dcr_82077 dir_82077 /* Config Control reg. */ | |
| }; | |
| /* You'll only ever find one controller on an Ultra anyways. */ | |
| static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1; | |
| unsigned long fdc_status; | |
| static struct platform_device *floppy_op = NULL; | |
| struct sun_floppy_ops { | |
| unsigned char (*fd_inb) (unsigned long port); | |
| void (*fd_outb) (unsigned char value, unsigned long port); | |
| void (*fd_enable_dma) (void); | |
| void (*fd_disable_dma) (void); | |
| void (*fd_set_dma_mode) (int); | |
| void (*fd_set_dma_addr) (char *); | |
| void (*fd_set_dma_count) (int); | |
| unsigned int (*get_dma_residue) (void); | |
| int (*fd_request_irq) (void); | |
| void (*fd_free_irq) (void); | |
| int (*fd_eject) (int); | |
| }; | |
| static struct sun_floppy_ops sun_fdops; | |
| #define fd_inb(port) sun_fdops.fd_inb(port) | |
| #define fd_outb(value,port) sun_fdops.fd_outb(value,port) | |
| #define fd_enable_dma() sun_fdops.fd_enable_dma() | |
| #define fd_disable_dma() sun_fdops.fd_disable_dma() | |
| #define fd_request_dma() (0) /* nothing... */ | |
| #define fd_free_dma() /* nothing... */ | |
| #define fd_clear_dma_ff() /* nothing... */ | |
| #define fd_set_dma_mode(mode) sun_fdops.fd_set_dma_mode(mode) | |
| #define fd_set_dma_addr(addr) sun_fdops.fd_set_dma_addr(addr) | |
| #define fd_set_dma_count(count) sun_fdops.fd_set_dma_count(count) | |
| #define get_dma_residue(x) sun_fdops.get_dma_residue() | |
| #define fd_cacheflush(addr, size) /* nothing... */ | |
| #define fd_request_irq() sun_fdops.fd_request_irq() | |
| #define fd_free_irq() sun_fdops.fd_free_irq() | |
| #define fd_eject(drive) sun_fdops.fd_eject(drive) | |
| /* Super paranoid... */ | |
| #undef HAVE_DISABLE_HLT | |
| static int sun_floppy_types[2] = { 0, 0 }; | |
| /* Here is where we catch the floppy driver trying to initialize, | |
| * therefore this is where we call the PROM device tree probing | |
| * routine etc. on the Sparc. | |
| */ | |
| #define FLOPPY0_TYPE sun_floppy_init() | |
| #define FLOPPY1_TYPE sun_floppy_types[1] | |
| #define FDC1 ((unsigned long)sun_fdc) | |
| #define N_FDC 1 | |
| #define N_DRIVE 8 | |
| /* No 64k boundary crossing problems on the Sparc. */ | |
| #define CROSS_64KB(a,s) (0) | |
| static unsigned char sun_82077_fd_inb(unsigned long port) | |
| { | |
| udelay(5); | |
| switch(port & 7) { | |
| default: | |
| printk("floppy: Asked to read unknown port %lx\n", port); | |
| panic("floppy: Port bolixed."); | |
| case 4: /* FD_STATUS */ | |
| return sbus_readb(&sun_fdc->status_82077) & ~STATUS_DMA; | |
| case 5: /* FD_DATA */ | |
| return sbus_readb(&sun_fdc->data_82077); | |
| case 7: /* FD_DIR */ | |
| /* XXX: Is DCL on 0x80 in sun4m? */ | |
| return sbus_readb(&sun_fdc->dir_82077); | |
| } | |
| panic("sun_82072_fd_inb: How did I get here?"); | |
| } | |
| static void sun_82077_fd_outb(unsigned char value, unsigned long port) | |
| { | |
| udelay(5); | |
| switch(port & 7) { | |
| default: | |
| printk("floppy: Asked to write to unknown port %lx\n", port); | |
| panic("floppy: Port bolixed."); | |
| case 2: /* FD_DOR */ | |
| /* Happily, the 82077 has a real DOR register. */ | |
| sbus_writeb(value, &sun_fdc->dor_82077); | |
| break; | |
| case 5: /* FD_DATA */ | |
| sbus_writeb(value, &sun_fdc->data_82077); | |
| break; | |
| case 7: /* FD_DCR */ | |
| sbus_writeb(value, &sun_fdc->dcr_82077); | |
| break; | |
| case 4: /* FD_STATUS */ | |
| sbus_writeb(value, &sun_fdc->status_82077); | |
| break; | |
| } | |
| return; | |
| } | |
| /* For pseudo-dma (Sun floppy drives have no real DMA available to | |
| * them so we must eat the data fifo bytes directly ourselves) we have | |
| * three state variables. doing_pdma tells our inline low-level | |
| * assembly floppy interrupt entry point whether it should sit and eat | |
| * bytes from the fifo or just transfer control up to the higher level | |
| * floppy interrupt c-code. I tried very hard but I could not get the | |
| * pseudo-dma to work in c-code without getting many overruns and | |
| * underruns. If non-zero, doing_pdma encodes the direction of | |
| * the transfer for debugging. 1=read 2=write | |
| */ | |
| unsigned char *pdma_vaddr; | |
| unsigned long pdma_size; | |
| volatile int doing_pdma = 0; | |
| /* This is software state */ | |
| char *pdma_base = NULL; | |
| unsigned long pdma_areasize; | |
| /* Common routines to all controller types on the Sparc. */ | |
| static void sun_fd_disable_dma(void) | |
| { | |
| doing_pdma = 0; | |
| pdma_base = NULL; | |
| } | |
| static void sun_fd_set_dma_mode(int mode) | |
| { | |
| switch(mode) { | |
| case DMA_MODE_READ: | |
| doing_pdma = 1; | |
| break; | |
| case DMA_MODE_WRITE: | |
| doing_pdma = 2; | |
| break; | |
| default: | |
| printk("Unknown dma mode %d\n", mode); | |
| panic("floppy: Giving up..."); | |
| } | |
| } | |
| static void sun_fd_set_dma_addr(char *buffer) | |
| { | |
| pdma_vaddr = buffer; | |
| } | |
| static void sun_fd_set_dma_count(int length) | |
| { | |
| pdma_size = length; | |
| } | |
| static void sun_fd_enable_dma(void) | |
| { | |
| pdma_base = pdma_vaddr; | |
| pdma_areasize = pdma_size; | |
| } | |
| irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie) | |
| { | |
| if (likely(doing_pdma)) { | |
| void __iomem *stat = (void __iomem *) fdc_status; | |
| unsigned char *vaddr = pdma_vaddr; | |
| unsigned long size = pdma_size; | |
| u8 val; | |
| while (size) { | |
| val = readb(stat); | |
| if (unlikely(!(val & 0x80))) { | |
| pdma_vaddr = vaddr; | |
| pdma_size = size; | |
| return IRQ_HANDLED; | |
| } | |
| if (unlikely(!(val & 0x20))) { | |
| pdma_vaddr = vaddr; | |
| pdma_size = size; | |
| doing_pdma = 0; | |
| goto main_interrupt; | |
| } | |
| if (val & 0x40) { | |
| /* read */ | |
| *vaddr++ = readb(stat + 1); | |
| } else { | |
| unsigned char data = *vaddr++; | |
| /* write */ | |
| writeb(data, stat + 1); | |
| } | |
| size--; | |
| } | |
| pdma_vaddr = vaddr; | |
| pdma_size = size; | |
| /* Send Terminal Count pulse to floppy controller. */ | |
| val = readb(auxio_register); | |
| val |= AUXIO_AUX1_FTCNT; | |
| writeb(val, auxio_register); | |
| val &= ~AUXIO_AUX1_FTCNT; | |
| writeb(val, auxio_register); | |
| doing_pdma = 0; | |
| } | |
| main_interrupt: | |
| return floppy_interrupt(irq, dev_cookie); | |
| } | |
| static int sun_fd_request_irq(void) | |
| { | |
| static int once = 0; | |
| int error; | |
| if(!once) { | |
| once = 1; | |
| error = request_irq(FLOPPY_IRQ, sparc_floppy_irq, | |
| 0, "floppy", NULL); | |
| return ((error == 0) ? 0 : -1); | |
| } | |
| return 0; | |
| } | |
| static void sun_fd_free_irq(void) | |
| { | |
| } | |
| static unsigned int sun_get_dma_residue(void) | |
| { | |
| /* XXX This isn't really correct. XXX */ | |
| return 0; | |
| } | |
| static int sun_fd_eject(int drive) | |
| { | |
| set_dor(0x00, 0xff, 0x90); | |
| udelay(500); | |
| set_dor(0x00, 0x6f, 0x00); | |
| udelay(500); | |
| return 0; | |
| } | |
| #include <asm/ebus_dma.h> | |
| #include <asm/ns87303.h> | |
| static struct ebus_dma_info sun_pci_fd_ebus_dma; | |
| static struct device *sun_floppy_dev; | |
| static int sun_pci_broken_drive = -1; | |
| struct sun_pci_dma_op { | |
| unsigned int addr; | |
| int len; | |
| int direction; | |
| char *buf; | |
| }; | |
| static struct sun_pci_dma_op sun_pci_dma_current = { -1U, 0, 0, NULL}; | |
| static struct sun_pci_dma_op sun_pci_dma_pending = { -1U, 0, 0, NULL}; | |
| irqreturn_t floppy_interrupt(int irq, void *dev_id); | |
| static unsigned char sun_pci_fd_inb(unsigned long port) | |
| { | |
| udelay(5); | |
| return inb(port); | |
| } | |
| static void sun_pci_fd_outb(unsigned char val, unsigned long port) | |
| { | |
| udelay(5); | |
| outb(val, port); | |
| } | |
| static void sun_pci_fd_broken_outb(unsigned char val, unsigned long port) | |
| { | |
| udelay(5); | |
| /* | |
| * XXX: Due to SUN's broken floppy connector on AX and AXi | |
| * we need to turn on MOTOR_0 also, if the floppy is | |
| * jumpered to DS1 (like most PC floppies are). I hope | |
| * this does not hurt correct hardware like the AXmp. | |
| * (Eddie, Sep 12 1998). | |
| */ | |
| if (port == ((unsigned long)sun_fdc) + 2) { | |
| if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x20)) { | |
| val |= 0x10; | |
| } | |
| } | |
| outb(val, port); | |
| } | |
| #ifdef PCI_FDC_SWAP_DRIVES | |
| static void sun_pci_fd_lde_broken_outb(unsigned char val, unsigned long port) | |
| { | |
| udelay(5); | |
| /* | |
| * XXX: Due to SUN's broken floppy connector on AX and AXi | |
| * we need to turn on MOTOR_0 also, if the floppy is | |
| * jumpered to DS1 (like most PC floppies are). I hope | |
| * this does not hurt correct hardware like the AXmp. | |
| * (Eddie, Sep 12 1998). | |
| */ | |
| if (port == ((unsigned long)sun_fdc) + 2) { | |
| if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x10)) { | |
| val &= ~(0x03); | |
| val |= 0x21; | |
| } | |
| } | |
| outb(val, port); | |
| } | |
| #endif /* PCI_FDC_SWAP_DRIVES */ | |
| static void sun_pci_fd_enable_dma(void) | |
| { | |
| BUG_ON((NULL == sun_pci_dma_pending.buf) || | |
| (0 == sun_pci_dma_pending.len) || | |
| (0 == sun_pci_dma_pending.direction)); | |
| sun_pci_dma_current.buf = sun_pci_dma_pending.buf; | |
| sun_pci_dma_current.len = sun_pci_dma_pending.len; | |
| sun_pci_dma_current.direction = sun_pci_dma_pending.direction; | |
| sun_pci_dma_pending.buf = NULL; | |
| sun_pci_dma_pending.len = 0; | |
| sun_pci_dma_pending.direction = 0; | |
| sun_pci_dma_pending.addr = -1U; | |
| sun_pci_dma_current.addr = | |
| dma_map_single(sun_floppy_dev, | |
| sun_pci_dma_current.buf, | |
| sun_pci_dma_current.len, | |
| sun_pci_dma_current.direction); | |
| ebus_dma_enable(&sun_pci_fd_ebus_dma, 1); | |
| if (ebus_dma_request(&sun_pci_fd_ebus_dma, | |
| sun_pci_dma_current.addr, | |
| sun_pci_dma_current.len)) | |
| BUG(); | |
| } | |
| static void sun_pci_fd_disable_dma(void) | |
| { | |
| ebus_dma_enable(&sun_pci_fd_ebus_dma, 0); | |
| if (sun_pci_dma_current.addr != -1U) | |
| dma_unmap_single(sun_floppy_dev, | |
| sun_pci_dma_current.addr, | |
| sun_pci_dma_current.len, | |
| sun_pci_dma_current.direction); | |
| sun_pci_dma_current.addr = -1U; | |
| } | |
| static void sun_pci_fd_set_dma_mode(int mode) | |
| { | |
| if (mode == DMA_MODE_WRITE) | |
| sun_pci_dma_pending.direction = DMA_TO_DEVICE; | |
| else | |
| sun_pci_dma_pending.direction = DMA_FROM_DEVICE; | |
| ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE); | |
| } | |
| static void sun_pci_fd_set_dma_count(int length) | |
| { | |
| sun_pci_dma_pending.len = length; | |
| } | |
| static void sun_pci_fd_set_dma_addr(char *buffer) | |
| { | |
| sun_pci_dma_pending.buf = buffer; | |
| } | |
| static unsigned int sun_pci_get_dma_residue(void) | |
| { | |
| return ebus_dma_residue(&sun_pci_fd_ebus_dma); | |
| } | |
| static int sun_pci_fd_request_irq(void) | |
| { | |
| return ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 1); | |
| } | |
| static void sun_pci_fd_free_irq(void) | |
| { | |
| ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 0); | |
| } | |
| static int sun_pci_fd_eject(int drive) | |
| { | |
| return -EINVAL; | |
| } | |
| void sun_pci_fd_dma_callback(struct ebus_dma_info *p, int event, void *cookie) | |
| { | |
| floppy_interrupt(0, NULL); | |
| } | |
| /* | |
| * Floppy probing, we'd like to use /dev/fd0 for a single Floppy on PCI, | |
| * even if this is configured using DS1, thus looks like /dev/fd1 with | |
| * the cabling used in Ultras. | |
| */ | |
| #define DOR (port + 2) | |
| #define MSR (port + 4) | |
| #define FIFO (port + 5) | |
| static void sun_pci_fd_out_byte(unsigned long port, unsigned char val, | |
| unsigned long reg) | |
| { | |
| unsigned char status; | |
| int timeout = 1000; | |
| while (!((status = inb(MSR)) & 0x80) && --timeout) | |
| udelay(100); | |
| outb(val, reg); | |
| } | |
| static unsigned char sun_pci_fd_sensei(unsigned long port) | |
| { | |
| unsigned char result[2] = { 0x70, 0x00 }; | |
| unsigned char status; | |
| int i = 0; | |
| sun_pci_fd_out_byte(port, 0x08, FIFO); | |
| do { | |
| int timeout = 1000; | |
| while (!((status = inb(MSR)) & 0x80) && --timeout) | |
| udelay(100); | |
| if (!timeout) | |
| break; | |
| if ((status & 0xf0) == 0xd0) | |
| result[i++] = inb(FIFO); | |
| else | |
| break; | |
| } while (i < 2); | |
| return result[0]; | |
| } | |
| static void sun_pci_fd_reset(unsigned long port) | |
| { | |
| unsigned char mask = 0x00; | |
| unsigned char status; | |
| int timeout = 10000; | |
| outb(0x80, MSR); | |
| do { | |
| status = sun_pci_fd_sensei(port); | |
| if ((status & 0xc0) == 0xc0) | |
| mask |= 1 << (status & 0x03); | |
| else | |
| udelay(100); | |
| } while ((mask != 0x0f) && --timeout); | |
| } | |
| static int sun_pci_fd_test_drive(unsigned long port, int drive) | |
| { | |
| unsigned char status, data; | |
| int timeout = 1000; | |
| int ready; | |
| sun_pci_fd_reset(port); | |
| data = (0x10 << drive) | 0x0c | drive; | |
| sun_pci_fd_out_byte(port, data, DOR); | |
| sun_pci_fd_out_byte(port, 0x07, FIFO); | |
| sun_pci_fd_out_byte(port, drive & 0x03, FIFO); | |
| do { | |
| udelay(100); | |
| status = sun_pci_fd_sensei(port); | |
| } while (((status & 0xc0) == 0x80) && --timeout); | |
| if (!timeout) | |
| ready = 0; | |
| else | |
| ready = (status & 0x10) ? 0 : 1; | |
| sun_pci_fd_reset(port); | |
| return ready; | |
| } | |
| #undef FIFO | |
| #undef MSR | |
| #undef DOR | |
| static int __init ebus_fdthree_p(struct device_node *dp) | |
| { | |
| if (!strcmp(dp->name, "fdthree")) | |
| return 1; | |
| if (!strcmp(dp->name, "floppy")) { | |
| const char *compat; | |
| compat = of_get_property(dp, "compatible", NULL); | |
| if (compat && !strcmp(compat, "fdthree")) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static unsigned long __init sun_floppy_init(void) | |
| { | |
| static int initialized = 0; | |
| struct device_node *dp; | |
| struct platform_device *op; | |
| const char *prop; | |
| char state[128]; | |
| if (initialized) | |
| return sun_floppy_types[0]; | |
| initialized = 1; | |
| op = NULL; | |
| for_each_node_by_name(dp, "SUNW,fdtwo") { | |
| if (strcmp(dp->parent->name, "sbus")) | |
| continue; | |
| op = of_find_device_by_node(dp); | |
| if (op) | |
| break; | |
| } | |
| if (op) { | |
| floppy_op = op; | |
| FLOPPY_IRQ = op->archdata.irqs[0]; | |
| } else { | |
| struct device_node *ebus_dp; | |
| void __iomem *auxio_reg; | |
| const char *state_prop; | |
| unsigned long config; | |
| dp = NULL; | |
| for_each_node_by_name(ebus_dp, "ebus") { | |
| for (dp = ebus_dp->child; dp; dp = dp->sibling) { | |
| if (ebus_fdthree_p(dp)) | |
| goto found_fdthree; | |
| } | |
| } | |
| found_fdthree: | |
| if (!dp) | |
| return 0; | |
| op = of_find_device_by_node(dp); | |
| if (!op) | |
| return 0; | |
| state_prop = of_get_property(op->dev.of_node, "status", NULL); | |
| if (state_prop && !strncmp(state_prop, "disabled", 8)) | |
| return 0; | |
| FLOPPY_IRQ = op->archdata.irqs[0]; | |
| /* Make sure the high density bit is set, some systems | |
| * (most notably Ultra5/Ultra10) come up with it clear. | |
| */ | |
| auxio_reg = (void __iomem *) op->resource[2].start; | |
| writel(readl(auxio_reg)|0x2, auxio_reg); | |
| sun_floppy_dev = &op->dev; | |
| spin_lock_init(&sun_pci_fd_ebus_dma.lock); | |
| /* XXX ioremap */ | |
| sun_pci_fd_ebus_dma.regs = (void __iomem *) | |
| op->resource[1].start; | |
| if (!sun_pci_fd_ebus_dma.regs) | |
| return 0; | |
| sun_pci_fd_ebus_dma.flags = (EBUS_DMA_FLAG_USE_EBDMA_HANDLER | | |
| EBUS_DMA_FLAG_TCI_DISABLE); | |
| sun_pci_fd_ebus_dma.callback = sun_pci_fd_dma_callback; | |
| sun_pci_fd_ebus_dma.client_cookie = NULL; | |
| sun_pci_fd_ebus_dma.irq = FLOPPY_IRQ; | |
| strcpy(sun_pci_fd_ebus_dma.name, "floppy"); | |
| if (ebus_dma_register(&sun_pci_fd_ebus_dma)) | |
| return 0; | |
| /* XXX ioremap */ | |
| sun_fdc = (struct sun_flpy_controller *) op->resource[0].start; | |
| sun_fdops.fd_inb = sun_pci_fd_inb; | |
| sun_fdops.fd_outb = sun_pci_fd_outb; | |
| can_use_virtual_dma = use_virtual_dma = 0; | |
| sun_fdops.fd_enable_dma = sun_pci_fd_enable_dma; | |
| sun_fdops.fd_disable_dma = sun_pci_fd_disable_dma; | |
| sun_fdops.fd_set_dma_mode = sun_pci_fd_set_dma_mode; | |
| sun_fdops.fd_set_dma_addr = sun_pci_fd_set_dma_addr; | |
| sun_fdops.fd_set_dma_count = sun_pci_fd_set_dma_count; | |
| sun_fdops.get_dma_residue = sun_pci_get_dma_residue; | |
| sun_fdops.fd_request_irq = sun_pci_fd_request_irq; | |
| sun_fdops.fd_free_irq = sun_pci_fd_free_irq; | |
| sun_fdops.fd_eject = sun_pci_fd_eject; | |
| fdc_status = (unsigned long) &sun_fdc->status_82077; | |
| /* | |
| * XXX: Find out on which machines this is really needed. | |
| */ | |
| if (1) { | |
| sun_pci_broken_drive = 1; | |
| sun_fdops.fd_outb = sun_pci_fd_broken_outb; | |
| } | |
| allowed_drive_mask = 0; | |
| if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 0)) | |
| sun_floppy_types[0] = 4; | |
| if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 1)) | |
| sun_floppy_types[1] = 4; | |
| /* | |
| * Find NS87303 SuperIO config registers (through ecpp). | |
| */ | |
| config = 0; | |
| for (dp = ebus_dp->child; dp; dp = dp->sibling) { | |
| if (!strcmp(dp->name, "ecpp")) { | |
| struct platform_device *ecpp_op; | |
| ecpp_op = of_find_device_by_node(dp); | |
| if (ecpp_op) | |
| config = ecpp_op->resource[1].start; | |
| goto config_done; | |
| } | |
| } | |
| config_done: | |
| /* | |
| * Sanity check, is this really the NS87303? | |
| */ | |
| switch (config & 0x3ff) { | |
| case 0x02e: | |
| case 0x15c: | |
| case 0x26e: | |
| case 0x398: | |
| break; | |
| default: | |
| config = 0; | |
| } | |
| if (!config) | |
| return sun_floppy_types[0]; | |
| /* Enable PC-AT mode. */ | |
| ns87303_modify(config, ASC, 0, 0xc0); | |
| #ifdef PCI_FDC_SWAP_DRIVES | |
| /* | |
| * If only Floppy 1 is present, swap drives. | |
| */ | |
| if (!sun_floppy_types[0] && sun_floppy_types[1]) { | |
| /* | |
| * Set the drive exchange bit in FCR on NS87303, | |
| * make sure other bits are sane before doing so. | |
| */ | |
| ns87303_modify(config, FER, FER_EDM, 0); | |
| ns87303_modify(config, ASC, ASC_DRV2_SEL, 0); | |
| ns87303_modify(config, FCR, 0, FCR_LDE); | |
| config = sun_floppy_types[0]; | |
| sun_floppy_types[0] = sun_floppy_types[1]; | |
| sun_floppy_types[1] = config; | |
| if (sun_pci_broken_drive != -1) { | |
| sun_pci_broken_drive = 1 - sun_pci_broken_drive; | |
| sun_fdops.fd_outb = sun_pci_fd_lde_broken_outb; | |
| } | |
| } | |
| #endif /* PCI_FDC_SWAP_DRIVES */ | |
| return sun_floppy_types[0]; | |
| } | |
| prop = of_get_property(op->dev.of_node, "status", NULL); | |
| if (prop && !strncmp(state, "disabled", 8)) | |
| return 0; | |
| /* | |
| * We cannot do of_ioremap here: it does request_region, | |
| * which the generic floppy driver tries to do once again. | |
| * But we must use the sdev resource values as they have | |
| * had parent ranges applied. | |
| */ | |
| sun_fdc = (struct sun_flpy_controller *) | |
| (op->resource[0].start + | |
| ((op->resource[0].flags & 0x1ffUL) << 32UL)); | |
| /* Last minute sanity check... */ | |
| if (sbus_readb(&sun_fdc->status1_82077) == 0xff) { | |
| sun_fdc = (struct sun_flpy_controller *)-1; | |
| return 0; | |
| } | |
| sun_fdops.fd_inb = sun_82077_fd_inb; | |
| sun_fdops.fd_outb = sun_82077_fd_outb; | |
| can_use_virtual_dma = use_virtual_dma = 1; | |
| sun_fdops.fd_enable_dma = sun_fd_enable_dma; | |
| sun_fdops.fd_disable_dma = sun_fd_disable_dma; | |
| sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode; | |
| sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr; | |
| sun_fdops.fd_set_dma_count = sun_fd_set_dma_count; | |
| sun_fdops.get_dma_residue = sun_get_dma_residue; | |
| sun_fdops.fd_request_irq = sun_fd_request_irq; | |
| sun_fdops.fd_free_irq = sun_fd_free_irq; | |
| sun_fdops.fd_eject = sun_fd_eject; | |
| fdc_status = (unsigned long) &sun_fdc->status_82077; | |
| /* Success... */ | |
| allowed_drive_mask = 0x01; | |
| sun_floppy_types[0] = 4; | |
| sun_floppy_types[1] = 0; | |
| return sun_floppy_types[0]; | |
| } | |
| #define EXTRA_FLOPPY_PARAMS | |
| static DEFINE_SPINLOCK(dma_spin_lock); | |
| #define claim_dma_lock() \ | |
| ({ unsigned long flags; \ | |
| spin_lock_irqsave(&dma_spin_lock, flags); \ | |
| flags; \ | |
| }) | |
| #define release_dma_lock(__flags) \ | |
| spin_unlock_irqrestore(&dma_spin_lock, __flags); | |
| #endif /* !(__ASM_SPARC64_FLOPPY_H) */ |