| /* | |
| * uaccess.h: User space memore access functions. | |
| * | |
| * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) | |
| * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) | |
| */ | |
| #ifndef _ASM_UACCESS_H | |
| #define _ASM_UACCESS_H | |
| #ifdef __KERNEL__ | |
| #include <linux/compiler.h> | |
| #include <linux/sched.h> | |
| #include <linux/string.h> | |
| #include <linux/errno.h> | |
| #endif | |
| #ifndef __ASSEMBLY__ | |
| #include <asm/processor.h> | |
| #define ARCH_HAS_SORT_EXTABLE | |
| #define ARCH_HAS_SEARCH_EXTABLE | |
| /* Sparc is not segmented, however we need to be able to fool access_ok() | |
| * when doing system calls from kernel mode legitimately. | |
| * | |
| * "For historical reasons, these macros are grossly misnamed." -Linus | |
| */ | |
| #define KERNEL_DS ((mm_segment_t) { 0 }) | |
| #define USER_DS ((mm_segment_t) { -1 }) | |
| #define VERIFY_READ 0 | |
| #define VERIFY_WRITE 1 | |
| #define get_ds() (KERNEL_DS) | |
| #define get_fs() (current->thread.current_ds) | |
| #define set_fs(val) ((current->thread.current_ds) = (val)) | |
| #define segment_eq(a, b) ((a).seg == (b).seg) | |
| /* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test | |
| * can be fairly lightweight. | |
| * No one can read/write anything from userland in the kernel space by setting | |
| * large size and address near to PAGE_OFFSET - a fault will break his intentions. | |
| */ | |
| #define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; }) | |
| #define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) | |
| #define __access_ok(addr, size) (__user_ok((addr) & get_fs().seg, (size))) | |
| #define access_ok(type, addr, size) \ | |
| ({ (void)(type); __access_ok((unsigned long)(addr), size); }) | |
| /* | |
| * The exception table consists of pairs of addresses: the first is the | |
| * address of an instruction that is allowed to fault, and the second is | |
| * the address at which the program should continue. No registers are | |
| * modified, so it is entirely up to the continuation code to figure out | |
| * what to do. | |
| * | |
| * All the routines below use bits of fixup code that are out of line | |
| * with the main instruction path. This means when everything is well, | |
| * we don't even have to jump over them. Further, they do not intrude | |
| * on our cache or tlb entries. | |
| * | |
| * There is a special way how to put a range of potentially faulting | |
| * insns (like twenty ldd/std's with now intervening other instructions) | |
| * You specify address of first in insn and 0 in fixup and in the next | |
| * exception_table_entry you specify last potentially faulting insn + 1 | |
| * and in fixup the routine which should handle the fault. | |
| * That fixup code will get | |
| * (faulting_insn_address - first_insn_in_the_range_address)/4 | |
| * in %g2 (ie. index of the faulting instruction in the range). | |
| */ | |
| struct exception_table_entry | |
| { | |
| unsigned long insn, fixup; | |
| }; | |
| /* Returns 0 if exception not found and fixup otherwise. */ | |
| unsigned long search_extables_range(unsigned long addr, unsigned long *g2); | |
| void __ret_efault(void); | |
| /* Uh, these should become the main single-value transfer routines.. | |
| * They automatically use the right size if we just have the right | |
| * pointer type.. | |
| * | |
| * This gets kind of ugly. We want to return _two_ values in "get_user()" | |
| * and yet we don't want to do any pointers, because that is too much | |
| * of a performance impact. Thus we have a few rather ugly macros here, | |
| * and hide all the ugliness from the user. | |
| */ | |
| #define put_user(x, ptr) ({ \ | |
| unsigned long __pu_addr = (unsigned long)(ptr); \ | |
| __chk_user_ptr(ptr); \ | |
| __put_user_check((__typeof__(*(ptr)))(x), __pu_addr, sizeof(*(ptr))); \ | |
| }) | |
| #define get_user(x, ptr) ({ \ | |
| unsigned long __gu_addr = (unsigned long)(ptr); \ | |
| __chk_user_ptr(ptr); \ | |
| __get_user_check((x), __gu_addr, sizeof(*(ptr)), __typeof__(*(ptr))); \ | |
| }) | |
| /* | |
| * The "__xxx" versions do not do address space checking, useful when | |
| * doing multiple accesses to the same area (the user has to do the | |
| * checks by hand with "access_ok()") | |
| */ | |
| #define __put_user(x, ptr) \ | |
| __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) | |
| #define __get_user(x, ptr) \ | |
| __get_user_nocheck((x), (ptr), sizeof(*(ptr)), __typeof__(*(ptr))) | |
| struct __large_struct { unsigned long buf[100]; }; | |
| #define __m(x) ((struct __large_struct __user *)(x)) | |
| #define __put_user_check(x, addr, size) ({ \ | |
| register int __pu_ret; \ | |
| if (__access_ok(addr, size)) { \ | |
| switch (size) { \ | |
| case 1: \ | |
| __put_user_asm(x, b, addr, __pu_ret); \ | |
| break; \ | |
| case 2: \ | |
| __put_user_asm(x, h, addr, __pu_ret); \ | |
| break; \ | |
| case 4: \ | |
| __put_user_asm(x, , addr, __pu_ret); \ | |
| break; \ | |
| case 8: \ | |
| __put_user_asm(x, d, addr, __pu_ret); \ | |
| break; \ | |
| default: \ | |
| __pu_ret = __put_user_bad(); \ | |
| break; \ | |
| } \ | |
| } else { \ | |
| __pu_ret = -EFAULT; \ | |
| } \ | |
| __pu_ret; \ | |
| }) | |
| #define __put_user_nocheck(x, addr, size) ({ \ | |
| register int __pu_ret; \ | |
| switch (size) { \ | |
| case 1: __put_user_asm(x, b, addr, __pu_ret); break; \ | |
| case 2: __put_user_asm(x, h, addr, __pu_ret); break; \ | |
| case 4: __put_user_asm(x, , addr, __pu_ret); break; \ | |
| case 8: __put_user_asm(x, d, addr, __pu_ret); break; \ | |
| default: __pu_ret = __put_user_bad(); break; \ | |
| } \ | |
| __pu_ret; \ | |
| }) | |
| #define __put_user_asm(x, size, addr, ret) \ | |
| __asm__ __volatile__( \ | |
| "/* Put user asm, inline. */\n" \ | |
| "1:\t" "st"#size " %1, %2\n\t" \ | |
| "clr %0\n" \ | |
| "2:\n\n\t" \ | |
| ".section .fixup,#alloc,#execinstr\n\t" \ | |
| ".align 4\n" \ | |
| "3:\n\t" \ | |
| "b 2b\n\t" \ | |
| " mov %3, %0\n\t" \ | |
| ".previous\n\n\t" \ | |
| ".section __ex_table,#alloc\n\t" \ | |
| ".align 4\n\t" \ | |
| ".word 1b, 3b\n\t" \ | |
| ".previous\n\n\t" \ | |
| : "=&r" (ret) : "r" (x), "m" (*__m(addr)), \ | |
| "i" (-EFAULT)) | |
| int __put_user_bad(void); | |
| #define __get_user_check(x, addr, size, type) ({ \ | |
| register int __gu_ret; \ | |
| register unsigned long __gu_val; \ | |
| if (__access_ok(addr, size)) { \ | |
| switch (size) { \ | |
| case 1: \ | |
| __get_user_asm(__gu_val, ub, addr, __gu_ret); \ | |
| break; \ | |
| case 2: \ | |
| __get_user_asm(__gu_val, uh, addr, __gu_ret); \ | |
| break; \ | |
| case 4: \ | |
| __get_user_asm(__gu_val, , addr, __gu_ret); \ | |
| break; \ | |
| case 8: \ | |
| __get_user_asm(__gu_val, d, addr, __gu_ret); \ | |
| break; \ | |
| default: \ | |
| __gu_val = 0; \ | |
| __gu_ret = __get_user_bad(); \ | |
| break; \ | |
| } \ | |
| } else { \ | |
| __gu_val = 0; \ | |
| __gu_ret = -EFAULT; \ | |
| } \ | |
| x = (__force type) __gu_val; \ | |
| __gu_ret; \ | |
| }) | |
| #define __get_user_nocheck(x, addr, size, type) ({ \ | |
| register int __gu_ret; \ | |
| register unsigned long __gu_val; \ | |
| switch (size) { \ | |
| case 1: __get_user_asm(__gu_val, ub, addr, __gu_ret); break; \ | |
| case 2: __get_user_asm(__gu_val, uh, addr, __gu_ret); break; \ | |
| case 4: __get_user_asm(__gu_val, , addr, __gu_ret); break; \ | |
| case 8: __get_user_asm(__gu_val, d, addr, __gu_ret); break; \ | |
| default: \ | |
| __gu_val = 0; \ | |
| __gu_ret = __get_user_bad(); \ | |
| break; \ | |
| } \ | |
| x = (__force type) __gu_val; \ | |
| __gu_ret; \ | |
| }) | |
| #define __get_user_asm(x, size, addr, ret) \ | |
| __asm__ __volatile__( \ | |
| "/* Get user asm, inline. */\n" \ | |
| "1:\t" "ld"#size " %2, %1\n\t" \ | |
| "clr %0\n" \ | |
| "2:\n\n\t" \ | |
| ".section .fixup,#alloc,#execinstr\n\t" \ | |
| ".align 4\n" \ | |
| "3:\n\t" \ | |
| "clr %1\n\t" \ | |
| "b 2b\n\t" \ | |
| " mov %3, %0\n\n\t" \ | |
| ".previous\n\t" \ | |
| ".section __ex_table,#alloc\n\t" \ | |
| ".align 4\n\t" \ | |
| ".word 1b, 3b\n\n\t" \ | |
| ".previous\n\t" \ | |
| : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)), \ | |
| "i" (-EFAULT)) | |
| int __get_user_bad(void); | |
| unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size); | |
| static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n) | |
| { | |
| if (n && __access_ok((unsigned long) to, n)) { | |
| check_object_size(from, n, true); | |
| return __copy_user(to, (__force void __user *) from, n); | |
| } else | |
| return n; | |
| } | |
| static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n) | |
| { | |
| check_object_size(from, n, true); | |
| return __copy_user(to, (__force void __user *) from, n); | |
| } | |
| static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) | |
| { | |
| if (n && __access_ok((unsigned long) from, n)) { | |
| check_object_size(to, n, false); | |
| return __copy_user((__force void __user *) to, from, n); | |
| } else { | |
| memset(to, 0, n); | |
| return n; | |
| } | |
| } | |
| static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n) | |
| { | |
| return __copy_user((__force void __user *) to, from, n); | |
| } | |
| #define __copy_to_user_inatomic __copy_to_user | |
| #define __copy_from_user_inatomic __copy_from_user | |
| static inline unsigned long __clear_user(void __user *addr, unsigned long size) | |
| { | |
| unsigned long ret; | |
| __asm__ __volatile__ ( | |
| ".section __ex_table,#alloc\n\t" | |
| ".align 4\n\t" | |
| ".word 1f,3\n\t" | |
| ".previous\n\t" | |
| "mov %2, %%o1\n" | |
| "1:\n\t" | |
| "call __bzero\n\t" | |
| " mov %1, %%o0\n\t" | |
| "mov %%o0, %0\n" | |
| : "=r" (ret) : "r" (addr), "r" (size) : | |
| "o0", "o1", "o2", "o3", "o4", "o5", "o7", | |
| "g1", "g2", "g3", "g4", "g5", "g7", "cc"); | |
| return ret; | |
| } | |
| static inline unsigned long clear_user(void __user *addr, unsigned long n) | |
| { | |
| if (n && __access_ok((unsigned long) addr, n)) | |
| return __clear_user(addr, n); | |
| else | |
| return n; | |
| } | |
| __must_check long strlen_user(const char __user *str); | |
| __must_check long strnlen_user(const char __user *str, long n); | |
| #endif /* __ASSEMBLY__ */ | |
| #endif /* _ASM_UACCESS_H */ |