| /* | |
| * Copyright 2010 Tilera Corporation. All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation, version 2. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | |
| * NON INFRINGEMENT. See the GNU General Public License for | |
| * more details. | |
| */ | |
| #include <linux/cache.h> | |
| #include <linux/delay.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/module.h> | |
| #include <linux/mm.h> | |
| #include <linux/atomic.h> | |
| #include <arch/chip.h> | |
| /* This page is remapped on startup to be hash-for-home. */ | |
| int atomic_locks[PAGE_SIZE / sizeof(int)] __page_aligned_bss; | |
| int *__atomic_hashed_lock(volatile void *v) | |
| { | |
| /* NOTE: this code must match "sys_cmpxchg" in kernel/intvec_32.S */ | |
| /* | |
| * Use bits [3, 3 + ATOMIC_HASH_SHIFT) as the lock index. | |
| * Using mm works here because atomic_locks is page aligned. | |
| */ | |
| unsigned long ptr = __insn_mm((unsigned long)v >> 1, | |
| (unsigned long)atomic_locks, | |
| 2, (ATOMIC_HASH_SHIFT + 2) - 1); | |
| return (int *)ptr; | |
| } | |
| #ifdef CONFIG_SMP | |
| /* Return whether the passed pointer is a valid atomic lock pointer. */ | |
| static int is_atomic_lock(int *p) | |
| { | |
| return p >= &atomic_locks[0] && p < &atomic_locks[ATOMIC_HASH_SIZE]; | |
| } | |
| void __atomic_fault_unlock(int *irqlock_word) | |
| { | |
| BUG_ON(!is_atomic_lock(irqlock_word)); | |
| BUG_ON(*irqlock_word != 1); | |
| *irqlock_word = 0; | |
| } | |
| #endif /* CONFIG_SMP */ | |
| static inline int *__atomic_setup(volatile void *v) | |
| { | |
| /* Issue a load to the target to bring it into cache. */ | |
| *(volatile int *)v; | |
| return __atomic_hashed_lock(v); | |
| } | |
| int _atomic_xchg(int *v, int n) | |
| { | |
| return __atomic32_xchg(v, __atomic_setup(v), n).val; | |
| } | |
| EXPORT_SYMBOL(_atomic_xchg); | |
| int _atomic_xchg_add(int *v, int i) | |
| { | |
| return __atomic32_xchg_add(v, __atomic_setup(v), i).val; | |
| } | |
| EXPORT_SYMBOL(_atomic_xchg_add); | |
| int _atomic_xchg_add_unless(int *v, int a, int u) | |
| { | |
| /* | |
| * Note: argument order is switched here since it is easier | |
| * to use the first argument consistently as the "old value" | |
| * in the assembly, as is done for _atomic_cmpxchg(). | |
| */ | |
| return __atomic32_xchg_add_unless(v, __atomic_setup(v), u, a).val; | |
| } | |
| EXPORT_SYMBOL(_atomic_xchg_add_unless); | |
| int _atomic_cmpxchg(int *v, int o, int n) | |
| { | |
| return __atomic32_cmpxchg(v, __atomic_setup(v), o, n).val; | |
| } | |
| EXPORT_SYMBOL(_atomic_cmpxchg); | |
| unsigned long _atomic_fetch_or(volatile unsigned long *p, unsigned long mask) | |
| { | |
| return __atomic32_fetch_or((int *)p, __atomic_setup(p), mask).val; | |
| } | |
| EXPORT_SYMBOL(_atomic_fetch_or); | |
| unsigned long _atomic_fetch_and(volatile unsigned long *p, unsigned long mask) | |
| { | |
| return __atomic32_fetch_and((int *)p, __atomic_setup(p), mask).val; | |
| } | |
| EXPORT_SYMBOL(_atomic_fetch_and); | |
| unsigned long _atomic_fetch_andn(volatile unsigned long *p, unsigned long mask) | |
| { | |
| return __atomic32_fetch_andn((int *)p, __atomic_setup(p), mask).val; | |
| } | |
| EXPORT_SYMBOL(_atomic_fetch_andn); | |
| unsigned long _atomic_fetch_xor(volatile unsigned long *p, unsigned long mask) | |
| { | |
| return __atomic32_fetch_xor((int *)p, __atomic_setup(p), mask).val; | |
| } | |
| EXPORT_SYMBOL(_atomic_fetch_xor); | |
| long long _atomic64_xchg(long long *v, long long n) | |
| { | |
| return __atomic64_xchg(v, __atomic_setup(v), n); | |
| } | |
| EXPORT_SYMBOL(_atomic64_xchg); | |
| long long _atomic64_xchg_add(long long *v, long long i) | |
| { | |
| return __atomic64_xchg_add(v, __atomic_setup(v), i); | |
| } | |
| EXPORT_SYMBOL(_atomic64_xchg_add); | |
| long long _atomic64_xchg_add_unless(long long *v, long long a, long long u) | |
| { | |
| /* | |
| * Note: argument order is switched here since it is easier | |
| * to use the first argument consistently as the "old value" | |
| * in the assembly, as is done for _atomic_cmpxchg(). | |
| */ | |
| return __atomic64_xchg_add_unless(v, __atomic_setup(v), u, a); | |
| } | |
| EXPORT_SYMBOL(_atomic64_xchg_add_unless); | |
| long long _atomic64_cmpxchg(long long *v, long long o, long long n) | |
| { | |
| return __atomic64_cmpxchg(v, __atomic_setup(v), o, n); | |
| } | |
| EXPORT_SYMBOL(_atomic64_cmpxchg); | |
| long long _atomic64_fetch_and(long long *v, long long n) | |
| { | |
| return __atomic64_fetch_and(v, __atomic_setup(v), n); | |
| } | |
| EXPORT_SYMBOL(_atomic64_fetch_and); | |
| long long _atomic64_fetch_or(long long *v, long long n) | |
| { | |
| return __atomic64_fetch_or(v, __atomic_setup(v), n); | |
| } | |
| EXPORT_SYMBOL(_atomic64_fetch_or); | |
| long long _atomic64_fetch_xor(long long *v, long long n) | |
| { | |
| return __atomic64_fetch_xor(v, __atomic_setup(v), n); | |
| } | |
| EXPORT_SYMBOL(_atomic64_fetch_xor); | |
| /* | |
| * If any of the atomic or futex routines hit a bad address (not in | |
| * the page tables at kernel PL) this routine is called. The futex | |
| * routines are never used on kernel space, and the normal atomics and | |
| * bitops are never used on user space. So a fault on kernel space | |
| * must be fatal, but a fault on userspace is a futex fault and we | |
| * need to return -EFAULT. Note that the context this routine is | |
| * invoked in is the context of the "_atomic_xxx()" routines called | |
| * by the functions in this file. | |
| */ | |
| struct __get_user __atomic_bad_address(int __user *addr) | |
| { | |
| if (unlikely(!access_ok(VERIFY_WRITE, addr, sizeof(int)))) | |
| panic("Bad address used for kernel atomic op: %p\n", addr); | |
| return (struct __get_user) { .err = -EFAULT }; | |
| } | |
| void __init __init_atomic_per_cpu(void) | |
| { | |
| /* Validate power-of-two and "bigger than cpus" assumption */ | |
| BUILD_BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1)); | |
| BUG_ON(ATOMIC_HASH_SIZE < nr_cpu_ids); | |
| /* | |
| * On TILEPro we prefer to use a single hash-for-home | |
| * page, since this means atomic operations are less | |
| * likely to encounter a TLB fault and thus should | |
| * in general perform faster. You may wish to disable | |
| * this in situations where few hash-for-home tiles | |
| * are configured. | |
| */ | |
| BUG_ON((unsigned long)atomic_locks % PAGE_SIZE != 0); | |
| /* The locks must all fit on one page. */ | |
| BUILD_BUG_ON(ATOMIC_HASH_SIZE * sizeof(int) > PAGE_SIZE); | |
| /* | |
| * We use the page offset of the atomic value's address as | |
| * an index into atomic_locks, excluding the low 3 bits. | |
| * That should not produce more indices than ATOMIC_HASH_SIZE. | |
| */ | |
| BUILD_BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE); | |
| } |