| /* | |
| * Copyright 2010 Tilera Corporation. All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation, version 2. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | |
| * NON INFRINGEMENT. See the GNU General Public License for | |
| * more details. | |
| * | |
| * From i386 code copyright (C) 1995 Linus Torvalds | |
| */ | |
| #include <linux/signal.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/mman.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/init.h> | |
| #include <linux/tty.h> | |
| #include <linux/vt_kern.h> /* For unblank_screen() */ | |
| #include <linux/highmem.h> | |
| #include <linux/module.h> | |
| #include <linux/kprobes.h> | |
| #include <linux/hugetlb.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/kdebug.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/sections.h> | |
| #include <asm/traps.h> | |
| #include <asm/syscalls.h> | |
| #include <arch/interrupts.h> | |
| static noinline void force_sig_info_fault(const char *type, int si_signo, | |
| int si_code, unsigned long address, | |
| int fault_num, | |
| struct task_struct *tsk, | |
| struct pt_regs *regs) | |
| { | |
| siginfo_t info; | |
| if (unlikely(tsk->pid < 2)) { | |
| panic("Signal %d (code %d) at %#lx sent to %s!", | |
| si_signo, si_code & 0xffff, address, | |
| is_idle_task(tsk) ? "the idle task" : "init"); | |
| } | |
| info.si_signo = si_signo; | |
| info.si_errno = 0; | |
| info.si_code = si_code; | |
| info.si_addr = (void __user *)address; | |
| info.si_trapno = fault_num; | |
| trace_unhandled_signal(type, regs, address, si_signo); | |
| force_sig_info(si_signo, &info, tsk); | |
| } | |
| #ifndef __tilegx__ | |
| /* | |
| * Synthesize the fault a PL0 process would get by doing a word-load of | |
| * an unaligned address or a high kernel address. | |
| */ | |
| SYSCALL_DEFINE1(cmpxchg_badaddr, unsigned long, address) | |
| { | |
| struct pt_regs *regs = current_pt_regs(); | |
| if (address >= PAGE_OFFSET) | |
| force_sig_info_fault("atomic segfault", SIGSEGV, SEGV_MAPERR, | |
| address, INT_DTLB_MISS, current, regs); | |
| else | |
| force_sig_info_fault("atomic alignment fault", SIGBUS, | |
| BUS_ADRALN, address, | |
| INT_UNALIGN_DATA, current, regs); | |
| /* | |
| * Adjust pc to point at the actual instruction, which is unusual | |
| * for syscalls normally, but is appropriate when we are claiming | |
| * that a syscall swint1 caused a page fault or bus error. | |
| */ | |
| regs->pc -= 8; | |
| /* | |
| * Mark this as a caller-save interrupt, like a normal page fault, | |
| * so that when we go through the signal handler path we will | |
| * properly restore r0, r1, and r2 for the signal handler arguments. | |
| */ | |
| regs->flags |= PT_FLAGS_CALLER_SAVES; | |
| return 0; | |
| } | |
| #endif | |
| static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address) | |
| { | |
| unsigned index = pgd_index(address); | |
| pgd_t *pgd_k; | |
| pud_t *pud, *pud_k; | |
| pmd_t *pmd, *pmd_k; | |
| pgd += index; | |
| pgd_k = init_mm.pgd + index; | |
| if (!pgd_present(*pgd_k)) | |
| return NULL; | |
| pud = pud_offset(pgd, address); | |
| pud_k = pud_offset(pgd_k, address); | |
| if (!pud_present(*pud_k)) | |
| return NULL; | |
| pmd = pmd_offset(pud, address); | |
| pmd_k = pmd_offset(pud_k, address); | |
| if (!pmd_present(*pmd_k)) | |
| return NULL; | |
| if (!pmd_present(*pmd)) | |
| set_pmd(pmd, *pmd_k); | |
| else | |
| BUG_ON(pmd_ptfn(*pmd) != pmd_ptfn(*pmd_k)); | |
| return pmd_k; | |
| } | |
| /* | |
| * Handle a fault on the vmalloc area. | |
| */ | |
| static inline int vmalloc_fault(pgd_t *pgd, unsigned long address) | |
| { | |
| pmd_t *pmd_k; | |
| pte_t *pte_k; | |
| /* Make sure we are in vmalloc area */ | |
| if (!(address >= VMALLOC_START && address < VMALLOC_END)) | |
| return -1; | |
| /* | |
| * Synchronize this task's top level page-table | |
| * with the 'reference' page table. | |
| */ | |
| pmd_k = vmalloc_sync_one(pgd, address); | |
| if (!pmd_k) | |
| return -1; | |
| pte_k = pte_offset_kernel(pmd_k, address); | |
| if (!pte_present(*pte_k)) | |
| return -1; | |
| return 0; | |
| } | |
| /* Wait until this PTE has completed migration. */ | |
| static void wait_for_migration(pte_t *pte) | |
| { | |
| if (pte_migrating(*pte)) { | |
| /* | |
| * Wait until the migrater fixes up this pte. | |
| * We scale the loop count by the clock rate so we'll wait for | |
| * a few seconds here. | |
| */ | |
| int retries = 0; | |
| int bound = get_clock_rate(); | |
| while (pte_migrating(*pte)) { | |
| barrier(); | |
| if (++retries > bound) | |
| panic("Hit migrating PTE (%#llx) and page PFN %#lx still migrating", | |
| pte->val, pte_pfn(*pte)); | |
| } | |
| } | |
| } | |
| /* | |
| * It's not generally safe to use "current" to get the page table pointer, | |
| * since we might be running an oprofile interrupt in the middle of a | |
| * task switch. | |
| */ | |
| static pgd_t *get_current_pgd(void) | |
| { | |
| HV_Context ctx = hv_inquire_context(); | |
| unsigned long pgd_pfn = ctx.page_table >> PAGE_SHIFT; | |
| struct page *pgd_page = pfn_to_page(pgd_pfn); | |
| BUG_ON(PageHighMem(pgd_page)); | |
| return (pgd_t *) __va(ctx.page_table); | |
| } | |
| /* | |
| * We can receive a page fault from a migrating PTE at any time. | |
| * Handle it by just waiting until the fault resolves. | |
| * | |
| * It's also possible to get a migrating kernel PTE that resolves | |
| * itself during the downcall from hypervisor to Linux. We just check | |
| * here to see if the PTE seems valid, and if so we retry it. | |
| * | |
| * NOTE! We MUST NOT take any locks for this case. We may be in an | |
| * interrupt or a critical region, and must do as little as possible. | |
| * Similarly, we can't use atomic ops here, since we may be handling a | |
| * fault caused by an atomic op access. | |
| * | |
| * If we find a migrating PTE while we're in an NMI context, and we're | |
| * at a PC that has a registered exception handler, we don't wait, | |
| * since this thread may (e.g.) have been interrupted while migrating | |
| * its own stack, which would then cause us to self-deadlock. | |
| */ | |
| static int handle_migrating_pte(pgd_t *pgd, int fault_num, | |
| unsigned long address, unsigned long pc, | |
| int is_kernel_mode, int write) | |
| { | |
| pud_t *pud; | |
| pmd_t *pmd; | |
| pte_t *pte; | |
| pte_t pteval; | |
| if (pgd_addr_invalid(address)) | |
| return 0; | |
| pgd += pgd_index(address); | |
| pud = pud_offset(pgd, address); | |
| if (!pud || !pud_present(*pud)) | |
| return 0; | |
| pmd = pmd_offset(pud, address); | |
| if (!pmd || !pmd_present(*pmd)) | |
| return 0; | |
| pte = pmd_huge_page(*pmd) ? ((pte_t *)pmd) : | |
| pte_offset_kernel(pmd, address); | |
| pteval = *pte; | |
| if (pte_migrating(pteval)) { | |
| if (in_nmi() && search_exception_tables(pc)) | |
| return 0; | |
| wait_for_migration(pte); | |
| return 1; | |
| } | |
| if (!is_kernel_mode || !pte_present(pteval)) | |
| return 0; | |
| if (fault_num == INT_ITLB_MISS) { | |
| if (pte_exec(pteval)) | |
| return 1; | |
| } else if (write) { | |
| if (pte_write(pteval)) | |
| return 1; | |
| } else { | |
| if (pte_read(pteval)) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * This routine is responsible for faulting in user pages. | |
| * It passes the work off to one of the appropriate routines. | |
| * It returns true if the fault was successfully handled. | |
| */ | |
| static int handle_page_fault(struct pt_regs *regs, | |
| int fault_num, | |
| int is_page_fault, | |
| unsigned long address, | |
| int write) | |
| { | |
| struct task_struct *tsk; | |
| struct mm_struct *mm; | |
| struct vm_area_struct *vma; | |
| unsigned long stack_offset; | |
| int fault; | |
| int si_code; | |
| int is_kernel_mode; | |
| pgd_t *pgd; | |
| unsigned int flags; | |
| /* on TILE, protection faults are always writes */ | |
| if (!is_page_fault) | |
| write = 1; | |
| flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; | |
| is_kernel_mode = !user_mode(regs); | |
| tsk = validate_current(); | |
| /* | |
| * Check to see if we might be overwriting the stack, and bail | |
| * out if so. The page fault code is a relatively likely | |
| * place to get trapped in an infinite regress, and once we | |
| * overwrite the whole stack, it becomes very hard to recover. | |
| */ | |
| stack_offset = stack_pointer & (THREAD_SIZE-1); | |
| if (stack_offset < THREAD_SIZE / 8) { | |
| pr_alert("Potential stack overrun: sp %#lx\n", stack_pointer); | |
| show_regs(regs); | |
| pr_alert("Killing current process %d/%s\n", | |
| tsk->pid, tsk->comm); | |
| do_group_exit(SIGKILL); | |
| } | |
| /* | |
| * Early on, we need to check for migrating PTE entries; | |
| * see homecache.c. If we find a migrating PTE, we wait until | |
| * the backing page claims to be done migrating, then we proceed. | |
| * For kernel PTEs, we rewrite the PTE and return and retry. | |
| * Otherwise, we treat the fault like a normal "no PTE" fault, | |
| * rather than trying to patch up the existing PTE. | |
| */ | |
| pgd = get_current_pgd(); | |
| if (handle_migrating_pte(pgd, fault_num, address, regs->pc, | |
| is_kernel_mode, write)) | |
| return 1; | |
| si_code = SEGV_MAPERR; | |
| /* | |
| * We fault-in kernel-space virtual memory on-demand. The | |
| * 'reference' page table is init_mm.pgd. | |
| * | |
| * NOTE! We MUST NOT take any locks for this case. We may | |
| * be in an interrupt or a critical region, and should | |
| * only copy the information from the master page table, | |
| * nothing more. | |
| * | |
| * This verifies that the fault happens in kernel space | |
| * and that the fault was not a protection fault. | |
| */ | |
| if (unlikely(address >= TASK_SIZE && | |
| !is_arch_mappable_range(address, 0))) { | |
| if (is_kernel_mode && is_page_fault && | |
| vmalloc_fault(pgd, address) >= 0) | |
| return 1; | |
| /* | |
| * Don't take the mm semaphore here. If we fixup a prefetch | |
| * fault we could otherwise deadlock. | |
| */ | |
| mm = NULL; /* happy compiler */ | |
| vma = NULL; | |
| goto bad_area_nosemaphore; | |
| } | |
| /* | |
| * If we're trying to touch user-space addresses, we must | |
| * be either at PL0, or else with interrupts enabled in the | |
| * kernel, so either way we can re-enable interrupts here | |
| * unless we are doing atomic access to user space with | |
| * interrupts disabled. | |
| */ | |
| if (!(regs->flags & PT_FLAGS_DISABLE_IRQ)) | |
| local_irq_enable(); | |
| mm = tsk->mm; | |
| /* | |
| * If we're in an interrupt, have no user context or are running in an | |
| * region with pagefaults disabled then we must not take the fault. | |
| */ | |
| if (pagefault_disabled() || !mm) { | |
| vma = NULL; /* happy compiler */ | |
| goto bad_area_nosemaphore; | |
| } | |
| if (!is_kernel_mode) | |
| flags |= FAULT_FLAG_USER; | |
| /* | |
| * When running in the kernel we expect faults to occur only to | |
| * addresses in user space. All other faults represent errors in the | |
| * kernel and should generate an OOPS. Unfortunately, in the case of an | |
| * erroneous fault occurring in a code path which already holds mmap_sem | |
| * we will deadlock attempting to validate the fault against the | |
| * address space. Luckily the kernel only validly references user | |
| * space from well defined areas of code, which are listed in the | |
| * exceptions table. | |
| * | |
| * As the vast majority of faults will be valid we will only perform | |
| * the source reference check when there is a possibility of a deadlock. | |
| * Attempt to lock the address space, if we cannot we then validate the | |
| * source. If this is invalid we can skip the address space check, | |
| * thus avoiding the deadlock. | |
| */ | |
| if (!down_read_trylock(&mm->mmap_sem)) { | |
| if (is_kernel_mode && | |
| !search_exception_tables(regs->pc)) { | |
| vma = NULL; /* happy compiler */ | |
| goto bad_area_nosemaphore; | |
| } | |
| retry: | |
| down_read(&mm->mmap_sem); | |
| } | |
| vma = find_vma(mm, address); | |
| if (!vma) | |
| goto bad_area; | |
| if (vma->vm_start <= address) | |
| goto good_area; | |
| if (!(vma->vm_flags & VM_GROWSDOWN)) | |
| goto bad_area; | |
| if (regs->sp < PAGE_OFFSET) { | |
| /* | |
| * accessing the stack below sp is always a bug. | |
| */ | |
| if (address < regs->sp) | |
| goto bad_area; | |
| } | |
| if (expand_stack(vma, address)) | |
| goto bad_area; | |
| /* | |
| * Ok, we have a good vm_area for this memory access, so | |
| * we can handle it.. | |
| */ | |
| good_area: | |
| si_code = SEGV_ACCERR; | |
| if (fault_num == INT_ITLB_MISS) { | |
| if (!(vma->vm_flags & VM_EXEC)) | |
| goto bad_area; | |
| } else if (write) { | |
| #ifdef TEST_VERIFY_AREA | |
| if (!is_page_fault && regs->cs == KERNEL_CS) | |
| pr_err("WP fault at " REGFMT "\n", regs->eip); | |
| #endif | |
| if (!(vma->vm_flags & VM_WRITE)) | |
| goto bad_area; | |
| flags |= FAULT_FLAG_WRITE; | |
| } else { | |
| if (!is_page_fault || !(vma->vm_flags & VM_READ)) | |
| goto bad_area; | |
| } | |
| /* | |
| * If for any reason at all we couldn't handle the fault, | |
| * make sure we exit gracefully rather than endlessly redo | |
| * the fault. | |
| */ | |
| fault = handle_mm_fault(vma, address, flags); | |
| if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) | |
| return 0; | |
| if (unlikely(fault & VM_FAULT_ERROR)) { | |
| if (fault & VM_FAULT_OOM) | |
| goto out_of_memory; | |
| else if (fault & VM_FAULT_SIGSEGV) | |
| goto bad_area; | |
| else if (fault & VM_FAULT_SIGBUS) | |
| goto do_sigbus; | |
| BUG(); | |
| } | |
| if (flags & FAULT_FLAG_ALLOW_RETRY) { | |
| if (fault & VM_FAULT_MAJOR) | |
| tsk->maj_flt++; | |
| else | |
| tsk->min_flt++; | |
| if (fault & VM_FAULT_RETRY) { | |
| flags &= ~FAULT_FLAG_ALLOW_RETRY; | |
| flags |= FAULT_FLAG_TRIED; | |
| /* | |
| * No need to up_read(&mm->mmap_sem) as we would | |
| * have already released it in __lock_page_or_retry | |
| * in mm/filemap.c. | |
| */ | |
| goto retry; | |
| } | |
| } | |
| #if CHIP_HAS_TILE_DMA() | |
| /* If this was a DMA TLB fault, restart the DMA engine. */ | |
| switch (fault_num) { | |
| case INT_DMATLB_MISS: | |
| case INT_DMATLB_MISS_DWNCL: | |
| case INT_DMATLB_ACCESS: | |
| case INT_DMATLB_ACCESS_DWNCL: | |
| __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK); | |
| break; | |
| } | |
| #endif | |
| up_read(&mm->mmap_sem); | |
| return 1; | |
| /* | |
| * Something tried to access memory that isn't in our memory map.. | |
| * Fix it, but check if it's kernel or user first.. | |
| */ | |
| bad_area: | |
| up_read(&mm->mmap_sem); | |
| bad_area_nosemaphore: | |
| /* User mode accesses just cause a SIGSEGV */ | |
| if (!is_kernel_mode) { | |
| /* | |
| * It's possible to have interrupts off here. | |
| */ | |
| local_irq_enable(); | |
| force_sig_info_fault("segfault", SIGSEGV, si_code, address, | |
| fault_num, tsk, regs); | |
| return 0; | |
| } | |
| no_context: | |
| /* Are we prepared to handle this kernel fault? */ | |
| if (fixup_exception(regs)) | |
| return 0; | |
| /* | |
| * Oops. The kernel tried to access some bad page. We'll have to | |
| * terminate things with extreme prejudice. | |
| */ | |
| bust_spinlocks(1); | |
| /* FIXME: no lookup_address() yet */ | |
| #ifdef SUPPORT_LOOKUP_ADDRESS | |
| if (fault_num == INT_ITLB_MISS) { | |
| pte_t *pte = lookup_address(address); | |
| if (pte && pte_present(*pte) && !pte_exec_kernel(*pte)) | |
| pr_crit("kernel tried to execute non-executable page - exploit attempt? (uid: %d)\n", | |
| current->uid); | |
| } | |
| #endif | |
| if (address < PAGE_SIZE) | |
| pr_alert("Unable to handle kernel NULL pointer dereference\n"); | |
| else | |
| pr_alert("Unable to handle kernel paging request\n"); | |
| pr_alert(" at virtual address " REGFMT ", pc " REGFMT "\n", | |
| address, regs->pc); | |
| show_regs(regs); | |
| if (unlikely(tsk->pid < 2)) { | |
| panic("Kernel page fault running %s!", | |
| is_idle_task(tsk) ? "the idle task" : "init"); | |
| } | |
| /* | |
| * More FIXME: we should probably copy the i386 here and | |
| * implement a generic die() routine. Not today. | |
| */ | |
| #ifdef SUPPORT_DIE | |
| die("Oops", regs); | |
| #endif | |
| bust_spinlocks(1); | |
| do_group_exit(SIGKILL); | |
| /* | |
| * We ran out of memory, or some other thing happened to us that made | |
| * us unable to handle the page fault gracefully. | |
| */ | |
| out_of_memory: | |
| up_read(&mm->mmap_sem); | |
| if (is_kernel_mode) | |
| goto no_context; | |
| pagefault_out_of_memory(); | |
| return 0; | |
| do_sigbus: | |
| up_read(&mm->mmap_sem); | |
| /* Kernel mode? Handle exceptions or die */ | |
| if (is_kernel_mode) | |
| goto no_context; | |
| force_sig_info_fault("bus error", SIGBUS, BUS_ADRERR, address, | |
| fault_num, tsk, regs); | |
| return 0; | |
| } | |
| #ifndef __tilegx__ | |
| /* We must release ICS before panicking or we won't get anywhere. */ | |
| #define ics_panic(fmt, ...) \ | |
| do { \ | |
| __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); \ | |
| panic(fmt, ##__VA_ARGS__); \ | |
| } while (0) | |
| /* | |
| * When we take an ITLB or DTLB fault or access violation in the | |
| * supervisor while the critical section bit is set, the hypervisor is | |
| * reluctant to write new values into the EX_CONTEXT_K_x registers, | |
| * since that might indicate we have not yet squirreled the SPR | |
| * contents away and can thus safely take a recursive interrupt. | |
| * Accordingly, the hypervisor passes us the PC via SYSTEM_SAVE_K_2. | |
| * | |
| * Note that this routine is called before homecache_tlb_defer_enter(), | |
| * which means that we can properly unlock any atomics that might | |
| * be used there (good), but also means we must be very sensitive | |
| * to not touch any data structures that might be located in memory | |
| * that could migrate, as we could be entering the kernel on a dataplane | |
| * cpu that has been deferring kernel TLB updates. This means, for | |
| * example, that we can't migrate init_mm or its pgd. | |
| */ | |
| struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num, | |
| unsigned long address, | |
| unsigned long info) | |
| { | |
| unsigned long pc = info & ~1; | |
| int write = info & 1; | |
| pgd_t *pgd = get_current_pgd(); | |
| /* Retval is 1 at first since we will handle the fault fully. */ | |
| struct intvec_state state = { | |
| do_page_fault, fault_num, address, write, 1 | |
| }; | |
| /* Validate that we are plausibly in the right routine. */ | |
| if ((pc & 0x7) != 0 || pc < PAGE_OFFSET || | |
| (fault_num != INT_DTLB_MISS && | |
| fault_num != INT_DTLB_ACCESS)) { | |
| unsigned long old_pc = regs->pc; | |
| regs->pc = pc; | |
| ics_panic("Bad ICS page fault args: old PC %#lx, fault %d/%d at %#lx", | |
| old_pc, fault_num, write, address); | |
| } | |
| /* We might be faulting on a vmalloc page, so check that first. */ | |
| if (fault_num != INT_DTLB_ACCESS && vmalloc_fault(pgd, address) >= 0) | |
| return state; | |
| /* | |
| * If we faulted with ICS set in sys_cmpxchg, we are providing | |
| * a user syscall service that should generate a signal on | |
| * fault. We didn't set up a kernel stack on initial entry to | |
| * sys_cmpxchg, but instead had one set up by the fault, which | |
| * (because sys_cmpxchg never releases ICS) came to us via the | |
| * SYSTEM_SAVE_K_2 mechanism, and thus EX_CONTEXT_K_[01] are | |
| * still referencing the original user code. We release the | |
| * atomic lock and rewrite pt_regs so that it appears that we | |
| * came from user-space directly, and after we finish the | |
| * fault we'll go back to user space and re-issue the swint. | |
| * This way the backtrace information is correct if we need to | |
| * emit a stack dump at any point while handling this. | |
| * | |
| * Must match register use in sys_cmpxchg(). | |
| */ | |
| if (pc >= (unsigned long) sys_cmpxchg && | |
| pc < (unsigned long) __sys_cmpxchg_end) { | |
| #ifdef CONFIG_SMP | |
| /* Don't unlock before we could have locked. */ | |
| if (pc >= (unsigned long)__sys_cmpxchg_grab_lock) { | |
| int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]); | |
| __atomic_fault_unlock(lock_ptr); | |
| } | |
| #endif | |
| regs->sp = regs->regs[27]; | |
| } | |
| /* | |
| * We can also fault in the atomic assembly, in which | |
| * case we use the exception table to do the first-level fixup. | |
| * We may re-fixup again in the real fault handler if it | |
| * turns out the faulting address is just bad, and not, | |
| * for example, migrating. | |
| */ | |
| else if (pc >= (unsigned long) __start_atomic_asm_code && | |
| pc < (unsigned long) __end_atomic_asm_code) { | |
| const struct exception_table_entry *fixup; | |
| #ifdef CONFIG_SMP | |
| /* Unlock the atomic lock. */ | |
| int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]); | |
| __atomic_fault_unlock(lock_ptr); | |
| #endif | |
| fixup = search_exception_tables(pc); | |
| if (!fixup) | |
| ics_panic("ICS atomic fault not in table: PC %#lx, fault %d", | |
| pc, fault_num); | |
| regs->pc = fixup->fixup; | |
| regs->ex1 = PL_ICS_EX1(KERNEL_PL, 0); | |
| } | |
| /* | |
| * Now that we have released the atomic lock (if necessary), | |
| * it's safe to spin if the PTE that caused the fault was migrating. | |
| */ | |
| if (fault_num == INT_DTLB_ACCESS) | |
| write = 1; | |
| if (handle_migrating_pte(pgd, fault_num, address, pc, 1, write)) | |
| return state; | |
| /* Return zero so that we continue on with normal fault handling. */ | |
| state.retval = 0; | |
| return state; | |
| } | |
| #endif /* !__tilegx__ */ | |
| /* | |
| * This routine handles page faults. It determines the address, and the | |
| * problem, and then passes it handle_page_fault() for normal DTLB and | |
| * ITLB issues, and for DMA or SN processor faults when we are in user | |
| * space. For the latter, if we're in kernel mode, we just save the | |
| * interrupt away appropriately and return immediately. We can't do | |
| * page faults for user code while in kernel mode. | |
| */ | |
| static inline void __do_page_fault(struct pt_regs *regs, int fault_num, | |
| unsigned long address, unsigned long write) | |
| { | |
| int is_page_fault; | |
| #ifdef CONFIG_KPROBES | |
| /* | |
| * This is to notify the fault handler of the kprobes. The | |
| * exception code is redundant as it is also carried in REGS, | |
| * but we pass it anyhow. | |
| */ | |
| if (notify_die(DIE_PAGE_FAULT, "page fault", regs, -1, | |
| regs->faultnum, SIGSEGV) == NOTIFY_STOP) | |
| return; | |
| #endif | |
| #ifdef __tilegx__ | |
| /* | |
| * We don't need early do_page_fault_ics() support, since unlike | |
| * Pro we don't need to worry about unlocking the atomic locks. | |
| * There is only one current case in GX where we touch any memory | |
| * under ICS other than our own kernel stack, and we handle that | |
| * here. (If we crash due to trying to touch our own stack, | |
| * we're in too much trouble for C code to help out anyway.) | |
| */ | |
| if (write & ~1) { | |
| unsigned long pc = write & ~1; | |
| if (pc >= (unsigned long) __start_unalign_asm_code && | |
| pc < (unsigned long) __end_unalign_asm_code) { | |
| struct thread_info *ti = current_thread_info(); | |
| /* | |
| * Our EX_CONTEXT is still what it was from the | |
| * initial unalign exception, but now we've faulted | |
| * on the JIT page. We would like to complete the | |
| * page fault however is appropriate, and then retry | |
| * the instruction that caused the unalign exception. | |
| * Our state has been "corrupted" by setting the low | |
| * bit in "sp", and stashing r0..r3 in the | |
| * thread_info area, so we revert all of that, then | |
| * continue as if this were a normal page fault. | |
| */ | |
| regs->sp &= ~1UL; | |
| regs->regs[0] = ti->unalign_jit_tmp[0]; | |
| regs->regs[1] = ti->unalign_jit_tmp[1]; | |
| regs->regs[2] = ti->unalign_jit_tmp[2]; | |
| regs->regs[3] = ti->unalign_jit_tmp[3]; | |
| write &= 1; | |
| } else { | |
| pr_alert("%s/%d: ICS set at page fault at %#lx: %#lx\n", | |
| current->comm, current->pid, pc, address); | |
| show_regs(regs); | |
| do_group_exit(SIGKILL); | |
| } | |
| } | |
| #else | |
| /* This case should have been handled by do_page_fault_ics(). */ | |
| BUG_ON(write & ~1); | |
| #endif | |
| #if CHIP_HAS_TILE_DMA() | |
| /* | |
| * If it's a DMA fault, suspend the transfer while we're | |
| * handling the miss; we'll restart after it's handled. If we | |
| * don't suspend, it's possible that this process could swap | |
| * out and back in, and restart the engine since the DMA is | |
| * still 'running'. | |
| */ | |
| if (fault_num == INT_DMATLB_MISS || | |
| fault_num == INT_DMATLB_ACCESS || | |
| fault_num == INT_DMATLB_MISS_DWNCL || | |
| fault_num == INT_DMATLB_ACCESS_DWNCL) { | |
| __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK); | |
| while (__insn_mfspr(SPR_DMA_USER_STATUS) & | |
| SPR_DMA_STATUS__BUSY_MASK) | |
| ; | |
| } | |
| #endif | |
| /* Validate fault num and decide if this is a first-time page fault. */ | |
| switch (fault_num) { | |
| case INT_ITLB_MISS: | |
| case INT_DTLB_MISS: | |
| #if CHIP_HAS_TILE_DMA() | |
| case INT_DMATLB_MISS: | |
| case INT_DMATLB_MISS_DWNCL: | |
| #endif | |
| is_page_fault = 1; | |
| break; | |
| case INT_DTLB_ACCESS: | |
| #if CHIP_HAS_TILE_DMA() | |
| case INT_DMATLB_ACCESS: | |
| case INT_DMATLB_ACCESS_DWNCL: | |
| #endif | |
| is_page_fault = 0; | |
| break; | |
| default: | |
| panic("Bad fault number %d in do_page_fault", fault_num); | |
| } | |
| #if CHIP_HAS_TILE_DMA() | |
| if (!user_mode(regs)) { | |
| struct async_tlb *async; | |
| switch (fault_num) { | |
| #if CHIP_HAS_TILE_DMA() | |
| case INT_DMATLB_MISS: | |
| case INT_DMATLB_ACCESS: | |
| case INT_DMATLB_MISS_DWNCL: | |
| case INT_DMATLB_ACCESS_DWNCL: | |
| async = ¤t->thread.dma_async_tlb; | |
| break; | |
| #endif | |
| default: | |
| async = NULL; | |
| } | |
| if (async) { | |
| /* | |
| * No vmalloc check required, so we can allow | |
| * interrupts immediately at this point. | |
| */ | |
| local_irq_enable(); | |
| set_thread_flag(TIF_ASYNC_TLB); | |
| if (async->fault_num != 0) { | |
| panic("Second async fault %d; old fault was %d (%#lx/%ld)", | |
| fault_num, async->fault_num, | |
| address, write); | |
| } | |
| BUG_ON(fault_num == 0); | |
| async->fault_num = fault_num; | |
| async->is_fault = is_page_fault; | |
| async->is_write = write; | |
| async->address = address; | |
| return; | |
| } | |
| } | |
| #endif | |
| handle_page_fault(regs, fault_num, is_page_fault, address, write); | |
| } | |
| void do_page_fault(struct pt_regs *regs, int fault_num, | |
| unsigned long address, unsigned long write) | |
| { | |
| __do_page_fault(regs, fault_num, address, write); | |
| } | |
| #if CHIP_HAS_TILE_DMA() | |
| /* | |
| * This routine effectively re-issues asynchronous page faults | |
| * when we are returning to user space. | |
| */ | |
| void do_async_page_fault(struct pt_regs *regs) | |
| { | |
| struct async_tlb *async = ¤t->thread.dma_async_tlb; | |
| /* | |
| * Clear thread flag early. If we re-interrupt while processing | |
| * code here, we will reset it and recall this routine before | |
| * returning to user space. | |
| */ | |
| clear_thread_flag(TIF_ASYNC_TLB); | |
| if (async->fault_num) { | |
| /* | |
| * Clear async->fault_num before calling the page-fault | |
| * handler so that if we re-interrupt before returning | |
| * from the function we have somewhere to put the | |
| * information from the new interrupt. | |
| */ | |
| int fault_num = async->fault_num; | |
| async->fault_num = 0; | |
| handle_page_fault(regs, fault_num, async->is_fault, | |
| async->address, async->is_write); | |
| } | |
| } | |
| #endif /* CHIP_HAS_TILE_DMA() */ | |
| void vmalloc_sync_all(void) | |
| { | |
| #ifdef __tilegx__ | |
| /* Currently all L1 kernel pmd's are static and shared. */ | |
| BUILD_BUG_ON(pgd_index(VMALLOC_END - PAGE_SIZE) != | |
| pgd_index(VMALLOC_START)); | |
| #else | |
| /* | |
| * Note that races in the updates of insync and start aren't | |
| * problematic: insync can only get set bits added, and updates to | |
| * start are only improving performance (without affecting correctness | |
| * if undone). | |
| */ | |
| static DECLARE_BITMAP(insync, PTRS_PER_PGD); | |
| static unsigned long start = PAGE_OFFSET; | |
| unsigned long address; | |
| BUILD_BUG_ON(PAGE_OFFSET & ~PGDIR_MASK); | |
| for (address = start; address >= PAGE_OFFSET; address += PGDIR_SIZE) { | |
| if (!test_bit(pgd_index(address), insync)) { | |
| unsigned long flags; | |
| struct list_head *pos; | |
| spin_lock_irqsave(&pgd_lock, flags); | |
| list_for_each(pos, &pgd_list) | |
| if (!vmalloc_sync_one(list_to_pgd(pos), | |
| address)) { | |
| /* Must be at first entry in list. */ | |
| BUG_ON(pos != pgd_list.next); | |
| break; | |
| } | |
| spin_unlock_irqrestore(&pgd_lock, flags); | |
| if (pos != pgd_list.next) | |
| set_bit(pgd_index(address), insync); | |
| } | |
| if (address == start && test_bit(pgd_index(address), insync)) | |
| start = address + PGDIR_SIZE; | |
| } | |
| #endif | |
| } |