| /* | |
| * Copyright (C) 2005 Intel Corporation | |
| * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> | |
| * - Added _PDC for SMP C-states on Intel CPUs | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/export.h> | |
| #include <linux/init.h> | |
| #include <linux/acpi.h> | |
| #include <linux/cpu.h> | |
| #include <linux/sched.h> | |
| #include <acpi/processor.h> | |
| #include <asm/acpi.h> | |
| #include <asm/mwait.h> | |
| #include <asm/special_insns.h> | |
| /* | |
| * Initialize bm_flags based on the CPU cache properties | |
| * On SMP it depends on cache configuration | |
| * - When cache is not shared among all CPUs, we flush cache | |
| * before entering C3. | |
| * - When cache is shared among all CPUs, we use bm_check | |
| * mechanism as in UP case | |
| * | |
| * This routine is called only after all the CPUs are online | |
| */ | |
| void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, | |
| unsigned int cpu) | |
| { | |
| struct cpuinfo_x86 *c = &cpu_data(cpu); | |
| flags->bm_check = 0; | |
| if (num_online_cpus() == 1) | |
| flags->bm_check = 1; | |
| else if (c->x86_vendor == X86_VENDOR_INTEL) { | |
| /* | |
| * Today all MP CPUs that support C3 share cache. | |
| * And caches should not be flushed by software while | |
| * entering C3 type state. | |
| */ | |
| flags->bm_check = 1; | |
| } | |
| /* | |
| * On all recent Intel platforms, ARB_DISABLE is a nop. | |
| * So, set bm_control to zero to indicate that ARB_DISABLE | |
| * is not required while entering C3 type state on | |
| * P4, Core and beyond CPUs | |
| */ | |
| if (c->x86_vendor == X86_VENDOR_INTEL && | |
| (c->x86 > 0xf || (c->x86 == 6 && c->x86_model >= 0x0f))) | |
| flags->bm_control = 0; | |
| } | |
| EXPORT_SYMBOL(acpi_processor_power_init_bm_check); | |
| /* The code below handles cstate entry with monitor-mwait pair on Intel*/ | |
| struct cstate_entry { | |
| struct { | |
| unsigned int eax; | |
| unsigned int ecx; | |
| } states[ACPI_PROCESSOR_MAX_POWER]; | |
| }; | |
| static struct cstate_entry __percpu *cpu_cstate_entry; /* per CPU ptr */ | |
| static short mwait_supported[ACPI_PROCESSOR_MAX_POWER]; | |
| #define NATIVE_CSTATE_BEYOND_HALT (2) | |
| static long acpi_processor_ffh_cstate_probe_cpu(void *_cx) | |
| { | |
| struct acpi_processor_cx *cx = _cx; | |
| long retval; | |
| unsigned int eax, ebx, ecx, edx; | |
| unsigned int edx_part; | |
| unsigned int cstate_type; /* C-state type and not ACPI C-state type */ | |
| unsigned int num_cstate_subtype; | |
| cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx); | |
| /* Check whether this particular cx_type (in CST) is supported or not */ | |
| cstate_type = ((cx->address >> MWAIT_SUBSTATE_SIZE) & | |
| MWAIT_CSTATE_MASK) + 1; | |
| edx_part = edx >> (cstate_type * MWAIT_SUBSTATE_SIZE); | |
| num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK; | |
| retval = 0; | |
| /* If the HW does not support any sub-states in this C-state */ | |
| if (num_cstate_subtype == 0) { | |
| pr_warn(FW_BUG "ACPI MWAIT C-state 0x%x not supported by HW (0x%x)\n", cx->address, edx_part); | |
| retval = -1; | |
| goto out; | |
| } | |
| /* mwait ecx extensions INTERRUPT_BREAK should be supported for C2/C3 */ | |
| if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) || | |
| !(ecx & CPUID5_ECX_INTERRUPT_BREAK)) { | |
| retval = -1; | |
| goto out; | |
| } | |
| if (!mwait_supported[cstate_type]) { | |
| mwait_supported[cstate_type] = 1; | |
| printk(KERN_DEBUG | |
| "Monitor-Mwait will be used to enter C-%d " | |
| "state\n", cx->type); | |
| } | |
| snprintf(cx->desc, | |
| ACPI_CX_DESC_LEN, "ACPI FFH INTEL MWAIT 0x%x", | |
| cx->address); | |
| out: | |
| return retval; | |
| } | |
| int acpi_processor_ffh_cstate_probe(unsigned int cpu, | |
| struct acpi_processor_cx *cx, struct acpi_power_register *reg) | |
| { | |
| struct cstate_entry *percpu_entry; | |
| struct cpuinfo_x86 *c = &cpu_data(cpu); | |
| long retval; | |
| if (!cpu_cstate_entry || c->cpuid_level < CPUID_MWAIT_LEAF) | |
| return -1; | |
| if (reg->bit_offset != NATIVE_CSTATE_BEYOND_HALT) | |
| return -1; | |
| percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu); | |
| percpu_entry->states[cx->index].eax = 0; | |
| percpu_entry->states[cx->index].ecx = 0; | |
| /* Make sure we are running on right CPU */ | |
| retval = work_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx); | |
| if (retval == 0) { | |
| /* Use the hint in CST */ | |
| percpu_entry->states[cx->index].eax = cx->address; | |
| percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK; | |
| } | |
| /* | |
| * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared, | |
| * then we should skip checking BM_STS for this C-state. | |
| * ref: "Intel Processor Vendor-Specific ACPI Interface Specification" | |
| */ | |
| if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2)) | |
| cx->bm_sts_skip = 1; | |
| return retval; | |
| } | |
| EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe); | |
| void __cpuidle acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx) | |
| { | |
| unsigned int cpu = smp_processor_id(); | |
| struct cstate_entry *percpu_entry; | |
| percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu); | |
| mwait_idle_with_hints(percpu_entry->states[cx->index].eax, | |
| percpu_entry->states[cx->index].ecx); | |
| } | |
| EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_enter); | |
| static int __init ffh_cstate_init(void) | |
| { | |
| struct cpuinfo_x86 *c = &boot_cpu_data; | |
| if (c->x86_vendor != X86_VENDOR_INTEL) | |
| return -1; | |
| cpu_cstate_entry = alloc_percpu(struct cstate_entry); | |
| return 0; | |
| } | |
| static void __exit ffh_cstate_exit(void) | |
| { | |
| free_percpu(cpu_cstate_entry); | |
| cpu_cstate_entry = NULL; | |
| } | |
| arch_initcall(ffh_cstate_init); | |
| __exitcall(ffh_cstate_exit); |