| /* | |
| * APIC driver for "bigsmp" xAPIC machines with more than 8 virtual CPUs. | |
| * | |
| * Drives the local APIC in "clustered mode". | |
| */ | |
| #include <linux/threads.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/dmi.h> | |
| #include <linux/smp.h> | |
| #include <asm/apicdef.h> | |
| #include <asm/fixmap.h> | |
| #include <asm/mpspec.h> | |
| #include <asm/apic.h> | |
| #include <asm/ipi.h> | |
| static unsigned bigsmp_get_apic_id(unsigned long x) | |
| { | |
| return (x >> 24) & 0xFF; | |
| } | |
| static int bigsmp_apic_id_registered(void) | |
| { | |
| return 1; | |
| } | |
| static unsigned long bigsmp_check_apicid_used(physid_mask_t *map, int apicid) | |
| { | |
| return 0; | |
| } | |
| static int bigsmp_early_logical_apicid(int cpu) | |
| { | |
| /* on bigsmp, logical apicid is the same as physical */ | |
| return early_per_cpu(x86_cpu_to_apicid, cpu); | |
| } | |
| static inline unsigned long calculate_ldr(int cpu) | |
| { | |
| unsigned long val, id; | |
| val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; | |
| id = per_cpu(x86_bios_cpu_apicid, cpu); | |
| val |= SET_APIC_LOGICAL_ID(id); | |
| return val; | |
| } | |
| /* | |
| * Set up the logical destination ID. | |
| * | |
| * Intel recommends to set DFR, LDR and TPR before enabling | |
| * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel | |
| * document number 292116). So here it goes... | |
| */ | |
| static void bigsmp_init_apic_ldr(void) | |
| { | |
| unsigned long val; | |
| int cpu = smp_processor_id(); | |
| apic_write(APIC_DFR, APIC_DFR_FLAT); | |
| val = calculate_ldr(cpu); | |
| apic_write(APIC_LDR, val); | |
| } | |
| static void bigsmp_setup_apic_routing(void) | |
| { | |
| printk(KERN_INFO | |
| "Enabling APIC mode: Physflat. Using %d I/O APICs\n", | |
| nr_ioapics); | |
| } | |
| static int bigsmp_cpu_present_to_apicid(int mps_cpu) | |
| { | |
| if (mps_cpu < nr_cpu_ids) | |
| return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu); | |
| return BAD_APICID; | |
| } | |
| static void bigsmp_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap) | |
| { | |
| /* For clustered we don't have a good way to do this yet - hack */ | |
| physids_promote(0xFFL, retmap); | |
| } | |
| static int bigsmp_check_phys_apicid_present(int phys_apicid) | |
| { | |
| return 1; | |
| } | |
| static int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb) | |
| { | |
| return cpuid_apic >> index_msb; | |
| } | |
| static void bigsmp_send_IPI_allbutself(int vector) | |
| { | |
| default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector); | |
| } | |
| static void bigsmp_send_IPI_all(int vector) | |
| { | |
| default_send_IPI_mask_sequence_phys(cpu_online_mask, vector); | |
| } | |
| static int dmi_bigsmp; /* can be set by dmi scanners */ | |
| static int hp_ht_bigsmp(const struct dmi_system_id *d) | |
| { | |
| printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident); | |
| dmi_bigsmp = 1; | |
| return 0; | |
| } | |
| static const struct dmi_system_id bigsmp_dmi_table[] = { | |
| { hp_ht_bigsmp, "HP ProLiant DL760 G2", | |
| { DMI_MATCH(DMI_BIOS_VENDOR, "HP"), | |
| DMI_MATCH(DMI_BIOS_VERSION, "P44-"), | |
| } | |
| }, | |
| { hp_ht_bigsmp, "HP ProLiant DL740", | |
| { DMI_MATCH(DMI_BIOS_VENDOR, "HP"), | |
| DMI_MATCH(DMI_BIOS_VERSION, "P47-"), | |
| } | |
| }, | |
| { } /* NULL entry stops DMI scanning */ | |
| }; | |
| static int probe_bigsmp(void) | |
| { | |
| if (def_to_bigsmp) | |
| dmi_bigsmp = 1; | |
| else | |
| dmi_check_system(bigsmp_dmi_table); | |
| return dmi_bigsmp; | |
| } | |
| static struct apic apic_bigsmp __ro_after_init = { | |
| .name = "bigsmp", | |
| .probe = probe_bigsmp, | |
| .acpi_madt_oem_check = NULL, | |
| .apic_id_valid = default_apic_id_valid, | |
| .apic_id_registered = bigsmp_apic_id_registered, | |
| .irq_delivery_mode = dest_Fixed, | |
| /* phys delivery to target CPU: */ | |
| .irq_dest_mode = 0, | |
| .target_cpus = default_target_cpus, | |
| .disable_esr = 1, | |
| .dest_logical = 0, | |
| .check_apicid_used = bigsmp_check_apicid_used, | |
| .vector_allocation_domain = default_vector_allocation_domain, | |
| .init_apic_ldr = bigsmp_init_apic_ldr, | |
| .ioapic_phys_id_map = bigsmp_ioapic_phys_id_map, | |
| .setup_apic_routing = bigsmp_setup_apic_routing, | |
| .cpu_present_to_apicid = bigsmp_cpu_present_to_apicid, | |
| .apicid_to_cpu_present = physid_set_mask_of_physid, | |
| .check_phys_apicid_present = bigsmp_check_phys_apicid_present, | |
| .phys_pkg_id = bigsmp_phys_pkg_id, | |
| .get_apic_id = bigsmp_get_apic_id, | |
| .set_apic_id = NULL, | |
| .cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and, | |
| .send_IPI = default_send_IPI_single_phys, | |
| .send_IPI_mask = default_send_IPI_mask_sequence_phys, | |
| .send_IPI_mask_allbutself = NULL, | |
| .send_IPI_allbutself = bigsmp_send_IPI_allbutself, | |
| .send_IPI_all = bigsmp_send_IPI_all, | |
| .send_IPI_self = default_send_IPI_self, | |
| .inquire_remote_apic = default_inquire_remote_apic, | |
| .read = native_apic_mem_read, | |
| .write = native_apic_mem_write, | |
| .eoi_write = native_apic_mem_write, | |
| .icr_read = native_apic_icr_read, | |
| .icr_write = native_apic_icr_write, | |
| .wait_icr_idle = native_apic_wait_icr_idle, | |
| .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, | |
| .x86_32_early_logical_apicid = bigsmp_early_logical_apicid, | |
| }; | |
| void __init generic_bigsmp_probe(void) | |
| { | |
| unsigned int cpu; | |
| if (!probe_bigsmp()) | |
| return; | |
| apic = &apic_bigsmp; | |
| for_each_possible_cpu(cpu) { | |
| if (early_per_cpu(x86_cpu_to_logical_apicid, | |
| cpu) == BAD_APICID) | |
| continue; | |
| early_per_cpu(x86_cpu_to_logical_apicid, cpu) = | |
| bigsmp_early_logical_apicid(cpu); | |
| } | |
| pr_info("Overriding APIC driver with %s\n", apic_bigsmp.name); | |
| } | |
| apic_driver(apic_bigsmp); |