| /* | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2, or (at your option) any | |
| * later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| */ | |
| /* | |
| * Copyright (C) 2004 Amit S. Kale <amitkale@linsyssoft.com> | |
| * Copyright (C) 2000-2001 VERITAS Software Corporation. | |
| * Copyright (C) 2002 Andi Kleen, SuSE Labs | |
| * Copyright (C) 2004 LinSysSoft Technologies Pvt. Ltd. | |
| * Copyright (C) 2007 MontaVista Software, Inc. | |
| * Copyright (C) 2007-2008 Jason Wessel, Wind River Systems, Inc. | |
| */ | |
| /**************************************************************************** | |
| * Contributor: Lake Stevens Instrument Division$ | |
| * Written by: Glenn Engel $ | |
| * Updated by: Amit Kale<akale@veritas.com> | |
| * Updated by: Tom Rini <trini@kernel.crashing.org> | |
| * Updated by: Jason Wessel <jason.wessel@windriver.com> | |
| * Modified for 386 by Jim Kingdon, Cygnus Support. | |
| * Origianl kgdb, compatibility with 2.1.xx kernel by | |
| * David Grothe <dave@gcom.com> | |
| * Integrated into 2.2.5 kernel by Tigran Aivazian <tigran@sco.com> | |
| * X86_64 changes from Andi Kleen's patch merged by Jim Houston | |
| */ | |
| #include <linux/spinlock.h> | |
| #include <linux/kdebug.h> | |
| #include <linux/string.h> | |
| #include <linux/kernel.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/sched.h> | |
| #include <linux/delay.h> | |
| #include <linux/kgdb.h> | |
| #include <linux/smp.h> | |
| #include <linux/nmi.h> | |
| #include <linux/hw_breakpoint.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/memory.h> | |
| #include <asm/text-patching.h> | |
| #include <asm/debugreg.h> | |
| #include <asm/apicdef.h> | |
| #include <asm/apic.h> | |
| #include <asm/nmi.h> | |
| #include <asm/switch_to.h> | |
| struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = | |
| { | |
| #ifdef CONFIG_X86_32 | |
| { "ax", 4, offsetof(struct pt_regs, ax) }, | |
| { "cx", 4, offsetof(struct pt_regs, cx) }, | |
| { "dx", 4, offsetof(struct pt_regs, dx) }, | |
| { "bx", 4, offsetof(struct pt_regs, bx) }, | |
| { "sp", 4, offsetof(struct pt_regs, sp) }, | |
| { "bp", 4, offsetof(struct pt_regs, bp) }, | |
| { "si", 4, offsetof(struct pt_regs, si) }, | |
| { "di", 4, offsetof(struct pt_regs, di) }, | |
| { "ip", 4, offsetof(struct pt_regs, ip) }, | |
| { "flags", 4, offsetof(struct pt_regs, flags) }, | |
| { "cs", 4, offsetof(struct pt_regs, cs) }, | |
| { "ss", 4, offsetof(struct pt_regs, ss) }, | |
| { "ds", 4, offsetof(struct pt_regs, ds) }, | |
| { "es", 4, offsetof(struct pt_regs, es) }, | |
| #else | |
| { "ax", 8, offsetof(struct pt_regs, ax) }, | |
| { "bx", 8, offsetof(struct pt_regs, bx) }, | |
| { "cx", 8, offsetof(struct pt_regs, cx) }, | |
| { "dx", 8, offsetof(struct pt_regs, dx) }, | |
| { "si", 8, offsetof(struct pt_regs, si) }, | |
| { "di", 8, offsetof(struct pt_regs, di) }, | |
| { "bp", 8, offsetof(struct pt_regs, bp) }, | |
| { "sp", 8, offsetof(struct pt_regs, sp) }, | |
| { "r8", 8, offsetof(struct pt_regs, r8) }, | |
| { "r9", 8, offsetof(struct pt_regs, r9) }, | |
| { "r10", 8, offsetof(struct pt_regs, r10) }, | |
| { "r11", 8, offsetof(struct pt_regs, r11) }, | |
| { "r12", 8, offsetof(struct pt_regs, r12) }, | |
| { "r13", 8, offsetof(struct pt_regs, r13) }, | |
| { "r14", 8, offsetof(struct pt_regs, r14) }, | |
| { "r15", 8, offsetof(struct pt_regs, r15) }, | |
| { "ip", 8, offsetof(struct pt_regs, ip) }, | |
| { "flags", 4, offsetof(struct pt_regs, flags) }, | |
| { "cs", 4, offsetof(struct pt_regs, cs) }, | |
| { "ss", 4, offsetof(struct pt_regs, ss) }, | |
| { "ds", 4, -1 }, | |
| { "es", 4, -1 }, | |
| #endif | |
| { "fs", 4, -1 }, | |
| { "gs", 4, -1 }, | |
| }; | |
| int dbg_set_reg(int regno, void *mem, struct pt_regs *regs) | |
| { | |
| if ( | |
| #ifdef CONFIG_X86_32 | |
| regno == GDB_SS || regno == GDB_FS || regno == GDB_GS || | |
| #endif | |
| regno == GDB_SP || regno == GDB_ORIG_AX) | |
| return 0; | |
| if (dbg_reg_def[regno].offset != -1) | |
| memcpy((void *)regs + dbg_reg_def[regno].offset, mem, | |
| dbg_reg_def[regno].size); | |
| return 0; | |
| } | |
| char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs) | |
| { | |
| if (regno == GDB_ORIG_AX) { | |
| memcpy(mem, ®s->orig_ax, sizeof(regs->orig_ax)); | |
| return "orig_ax"; | |
| } | |
| if (regno >= DBG_MAX_REG_NUM || regno < 0) | |
| return NULL; | |
| if (dbg_reg_def[regno].offset != -1) | |
| memcpy(mem, (void *)regs + dbg_reg_def[regno].offset, | |
| dbg_reg_def[regno].size); | |
| #ifdef CONFIG_X86_32 | |
| switch (regno) { | |
| case GDB_SS: | |
| if (!user_mode(regs)) | |
| *(unsigned long *)mem = __KERNEL_DS; | |
| break; | |
| case GDB_SP: | |
| if (!user_mode(regs)) | |
| *(unsigned long *)mem = kernel_stack_pointer(regs); | |
| break; | |
| case GDB_GS: | |
| case GDB_FS: | |
| *(unsigned long *)mem = 0xFFFF; | |
| break; | |
| } | |
| #endif | |
| return dbg_reg_def[regno].name; | |
| } | |
| /** | |
| * sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs | |
| * @gdb_regs: A pointer to hold the registers in the order GDB wants. | |
| * @p: The &struct task_struct of the desired process. | |
| * | |
| * Convert the register values of the sleeping process in @p to | |
| * the format that GDB expects. | |
| * This function is called when kgdb does not have access to the | |
| * &struct pt_regs and therefore it should fill the gdb registers | |
| * @gdb_regs with what has been saved in &struct thread_struct | |
| * thread field during switch_to. | |
| */ | |
| void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) | |
| { | |
| #ifndef CONFIG_X86_32 | |
| u32 *gdb_regs32 = (u32 *)gdb_regs; | |
| #endif | |
| gdb_regs[GDB_AX] = 0; | |
| gdb_regs[GDB_BX] = 0; | |
| gdb_regs[GDB_CX] = 0; | |
| gdb_regs[GDB_DX] = 0; | |
| gdb_regs[GDB_SI] = 0; | |
| gdb_regs[GDB_DI] = 0; | |
| gdb_regs[GDB_BP] = ((struct inactive_task_frame *)p->thread.sp)->bp; | |
| #ifdef CONFIG_X86_32 | |
| gdb_regs[GDB_DS] = __KERNEL_DS; | |
| gdb_regs[GDB_ES] = __KERNEL_DS; | |
| gdb_regs[GDB_PS] = 0; | |
| gdb_regs[GDB_CS] = __KERNEL_CS; | |
| gdb_regs[GDB_SS] = __KERNEL_DS; | |
| gdb_regs[GDB_FS] = 0xFFFF; | |
| gdb_regs[GDB_GS] = 0xFFFF; | |
| #else | |
| gdb_regs32[GDB_PS] = 0; | |
| gdb_regs32[GDB_CS] = __KERNEL_CS; | |
| gdb_regs32[GDB_SS] = __KERNEL_DS; | |
| gdb_regs[GDB_R8] = 0; | |
| gdb_regs[GDB_R9] = 0; | |
| gdb_regs[GDB_R10] = 0; | |
| gdb_regs[GDB_R11] = 0; | |
| gdb_regs[GDB_R12] = 0; | |
| gdb_regs[GDB_R13] = 0; | |
| gdb_regs[GDB_R14] = 0; | |
| gdb_regs[GDB_R15] = 0; | |
| #endif | |
| gdb_regs[GDB_PC] = 0; | |
| gdb_regs[GDB_SP] = p->thread.sp; | |
| } | |
| static struct hw_breakpoint { | |
| unsigned enabled; | |
| unsigned long addr; | |
| int len; | |
| int type; | |
| struct perf_event * __percpu *pev; | |
| } breakinfo[HBP_NUM]; | |
| static unsigned long early_dr7; | |
| static void kgdb_correct_hw_break(void) | |
| { | |
| int breakno; | |
| for (breakno = 0; breakno < HBP_NUM; breakno++) { | |
| struct perf_event *bp; | |
| struct arch_hw_breakpoint *info; | |
| int val; | |
| int cpu = raw_smp_processor_id(); | |
| if (!breakinfo[breakno].enabled) | |
| continue; | |
| if (dbg_is_early) { | |
| set_debugreg(breakinfo[breakno].addr, breakno); | |
| early_dr7 |= encode_dr7(breakno, | |
| breakinfo[breakno].len, | |
| breakinfo[breakno].type); | |
| set_debugreg(early_dr7, 7); | |
| continue; | |
| } | |
| bp = *per_cpu_ptr(breakinfo[breakno].pev, cpu); | |
| info = counter_arch_bp(bp); | |
| if (bp->attr.disabled != 1) | |
| continue; | |
| bp->attr.bp_addr = breakinfo[breakno].addr; | |
| bp->attr.bp_len = breakinfo[breakno].len; | |
| bp->attr.bp_type = breakinfo[breakno].type; | |
| info->address = breakinfo[breakno].addr; | |
| info->len = breakinfo[breakno].len; | |
| info->type = breakinfo[breakno].type; | |
| val = arch_install_hw_breakpoint(bp); | |
| if (!val) | |
| bp->attr.disabled = 0; | |
| } | |
| if (!dbg_is_early) | |
| hw_breakpoint_restore(); | |
| } | |
| static int hw_break_reserve_slot(int breakno) | |
| { | |
| int cpu; | |
| int cnt = 0; | |
| struct perf_event **pevent; | |
| if (dbg_is_early) | |
| return 0; | |
| for_each_online_cpu(cpu) { | |
| cnt++; | |
| pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu); | |
| if (dbg_reserve_bp_slot(*pevent)) | |
| goto fail; | |
| } | |
| return 0; | |
| fail: | |
| for_each_online_cpu(cpu) { | |
| cnt--; | |
| if (!cnt) | |
| break; | |
| pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu); | |
| dbg_release_bp_slot(*pevent); | |
| } | |
| return -1; | |
| } | |
| static int hw_break_release_slot(int breakno) | |
| { | |
| struct perf_event **pevent; | |
| int cpu; | |
| if (dbg_is_early) | |
| return 0; | |
| for_each_online_cpu(cpu) { | |
| pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu); | |
| if (dbg_release_bp_slot(*pevent)) | |
| /* | |
| * The debugger is responsible for handing the retry on | |
| * remove failure. | |
| */ | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static int | |
| kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) | |
| { | |
| int i; | |
| for (i = 0; i < HBP_NUM; i++) | |
| if (breakinfo[i].addr == addr && breakinfo[i].enabled) | |
| break; | |
| if (i == HBP_NUM) | |
| return -1; | |
| if (hw_break_release_slot(i)) { | |
| printk(KERN_ERR "Cannot remove hw breakpoint at %lx\n", addr); | |
| return -1; | |
| } | |
| breakinfo[i].enabled = 0; | |
| return 0; | |
| } | |
| static void kgdb_remove_all_hw_break(void) | |
| { | |
| int i; | |
| int cpu = raw_smp_processor_id(); | |
| struct perf_event *bp; | |
| for (i = 0; i < HBP_NUM; i++) { | |
| if (!breakinfo[i].enabled) | |
| continue; | |
| bp = *per_cpu_ptr(breakinfo[i].pev, cpu); | |
| if (!bp->attr.disabled) { | |
| arch_uninstall_hw_breakpoint(bp); | |
| bp->attr.disabled = 1; | |
| continue; | |
| } | |
| if (dbg_is_early) | |
| early_dr7 &= ~encode_dr7(i, breakinfo[i].len, | |
| breakinfo[i].type); | |
| else if (hw_break_release_slot(i)) | |
| printk(KERN_ERR "KGDB: hw bpt remove failed %lx\n", | |
| breakinfo[i].addr); | |
| breakinfo[i].enabled = 0; | |
| } | |
| } | |
| static int | |
| kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) | |
| { | |
| int i; | |
| for (i = 0; i < HBP_NUM; i++) | |
| if (!breakinfo[i].enabled) | |
| break; | |
| if (i == HBP_NUM) | |
| return -1; | |
| switch (bptype) { | |
| case BP_HARDWARE_BREAKPOINT: | |
| len = 1; | |
| breakinfo[i].type = X86_BREAKPOINT_EXECUTE; | |
| break; | |
| case BP_WRITE_WATCHPOINT: | |
| breakinfo[i].type = X86_BREAKPOINT_WRITE; | |
| break; | |
| case BP_ACCESS_WATCHPOINT: | |
| breakinfo[i].type = X86_BREAKPOINT_RW; | |
| break; | |
| default: | |
| return -1; | |
| } | |
| switch (len) { | |
| case 1: | |
| breakinfo[i].len = X86_BREAKPOINT_LEN_1; | |
| break; | |
| case 2: | |
| breakinfo[i].len = X86_BREAKPOINT_LEN_2; | |
| break; | |
| case 4: | |
| breakinfo[i].len = X86_BREAKPOINT_LEN_4; | |
| break; | |
| #ifdef CONFIG_X86_64 | |
| case 8: | |
| breakinfo[i].len = X86_BREAKPOINT_LEN_8; | |
| break; | |
| #endif | |
| default: | |
| return -1; | |
| } | |
| breakinfo[i].addr = addr; | |
| if (hw_break_reserve_slot(i)) { | |
| breakinfo[i].addr = 0; | |
| return -1; | |
| } | |
| breakinfo[i].enabled = 1; | |
| return 0; | |
| } | |
| /** | |
| * kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb. | |
| * @regs: Current &struct pt_regs. | |
| * | |
| * This function will be called if the particular architecture must | |
| * disable hardware debugging while it is processing gdb packets or | |
| * handling exception. | |
| */ | |
| static void kgdb_disable_hw_debug(struct pt_regs *regs) | |
| { | |
| int i; | |
| int cpu = raw_smp_processor_id(); | |
| struct perf_event *bp; | |
| /* Disable hardware debugging while we are in kgdb: */ | |
| set_debugreg(0UL, 7); | |
| for (i = 0; i < HBP_NUM; i++) { | |
| if (!breakinfo[i].enabled) | |
| continue; | |
| if (dbg_is_early) { | |
| early_dr7 &= ~encode_dr7(i, breakinfo[i].len, | |
| breakinfo[i].type); | |
| continue; | |
| } | |
| bp = *per_cpu_ptr(breakinfo[i].pev, cpu); | |
| if (bp->attr.disabled == 1) | |
| continue; | |
| arch_uninstall_hw_breakpoint(bp); | |
| bp->attr.disabled = 1; | |
| } | |
| } | |
| #ifdef CONFIG_SMP | |
| /** | |
| * kgdb_roundup_cpus - Get other CPUs into a holding pattern | |
| * @flags: Current IRQ state | |
| * | |
| * On SMP systems, we need to get the attention of the other CPUs | |
| * and get them be in a known state. This should do what is needed | |
| * to get the other CPUs to call kgdb_wait(). Note that on some arches, | |
| * the NMI approach is not used for rounding up all the CPUs. For example, | |
| * in case of MIPS, smp_call_function() is used to roundup CPUs. In | |
| * this case, we have to make sure that interrupts are enabled before | |
| * calling smp_call_function(). The argument to this function is | |
| * the flags that will be used when restoring the interrupts. There is | |
| * local_irq_save() call before kgdb_roundup_cpus(). | |
| * | |
| * On non-SMP systems, this is not called. | |
| */ | |
| void kgdb_roundup_cpus(unsigned long flags) | |
| { | |
| apic->send_IPI_allbutself(APIC_DM_NMI); | |
| } | |
| #endif | |
| /** | |
| * kgdb_arch_handle_exception - Handle architecture specific GDB packets. | |
| * @e_vector: The error vector of the exception that happened. | |
| * @signo: The signal number of the exception that happened. | |
| * @err_code: The error code of the exception that happened. | |
| * @remcomInBuffer: The buffer of the packet we have read. | |
| * @remcomOutBuffer: The buffer of %BUFMAX bytes to write a packet into. | |
| * @linux_regs: The &struct pt_regs of the current process. | |
| * | |
| * This function MUST handle the 'c' and 's' command packets, | |
| * as well packets to set / remove a hardware breakpoint, if used. | |
| * If there are additional packets which the hardware needs to handle, | |
| * they are handled here. The code should return -1 if it wants to | |
| * process more packets, and a %0 or %1 if it wants to exit from the | |
| * kgdb callback. | |
| */ | |
| int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, | |
| char *remcomInBuffer, char *remcomOutBuffer, | |
| struct pt_regs *linux_regs) | |
| { | |
| unsigned long addr; | |
| char *ptr; | |
| switch (remcomInBuffer[0]) { | |
| case 'c': | |
| case 's': | |
| /* try to read optional parameter, pc unchanged if no parm */ | |
| ptr = &remcomInBuffer[1]; | |
| if (kgdb_hex2long(&ptr, &addr)) | |
| linux_regs->ip = addr; | |
| case 'D': | |
| case 'k': | |
| /* clear the trace bit */ | |
| linux_regs->flags &= ~X86_EFLAGS_TF; | |
| atomic_set(&kgdb_cpu_doing_single_step, -1); | |
| /* set the trace bit if we're stepping */ | |
| if (remcomInBuffer[0] == 's') { | |
| linux_regs->flags |= X86_EFLAGS_TF; | |
| atomic_set(&kgdb_cpu_doing_single_step, | |
| raw_smp_processor_id()); | |
| } | |
| return 0; | |
| } | |
| /* this means that we do not want to exit from the handler: */ | |
| return -1; | |
| } | |
| static inline int | |
| single_step_cont(struct pt_regs *regs, struct die_args *args) | |
| { | |
| /* | |
| * Single step exception from kernel space to user space so | |
| * eat the exception and continue the process: | |
| */ | |
| printk(KERN_ERR "KGDB: trap/step from kernel to user space, " | |
| "resuming...\n"); | |
| kgdb_arch_handle_exception(args->trapnr, args->signr, | |
| args->err, "c", "", regs); | |
| /* | |
| * Reset the BS bit in dr6 (pointed by args->err) to | |
| * denote completion of processing | |
| */ | |
| (*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP; | |
| return NOTIFY_STOP; | |
| } | |
| static DECLARE_BITMAP(was_in_debug_nmi, NR_CPUS); | |
| static int kgdb_nmi_handler(unsigned int cmd, struct pt_regs *regs) | |
| { | |
| int cpu; | |
| switch (cmd) { | |
| case NMI_LOCAL: | |
| if (atomic_read(&kgdb_active) != -1) { | |
| /* KGDB CPU roundup */ | |
| cpu = raw_smp_processor_id(); | |
| kgdb_nmicallback(cpu, regs); | |
| set_bit(cpu, was_in_debug_nmi); | |
| touch_nmi_watchdog(); | |
| return NMI_HANDLED; | |
| } | |
| break; | |
| case NMI_UNKNOWN: | |
| cpu = raw_smp_processor_id(); | |
| if (__test_and_clear_bit(cpu, was_in_debug_nmi)) | |
| return NMI_HANDLED; | |
| break; | |
| default: | |
| /* do nothing */ | |
| break; | |
| } | |
| return NMI_DONE; | |
| } | |
| static int __kgdb_notify(struct die_args *args, unsigned long cmd) | |
| { | |
| struct pt_regs *regs = args->regs; | |
| switch (cmd) { | |
| case DIE_DEBUG: | |
| if (atomic_read(&kgdb_cpu_doing_single_step) != -1) { | |
| if (user_mode(regs)) | |
| return single_step_cont(regs, args); | |
| break; | |
| } else if (test_thread_flag(TIF_SINGLESTEP)) | |
| /* This means a user thread is single stepping | |
| * a system call which should be ignored | |
| */ | |
| return NOTIFY_DONE; | |
| /* fall through */ | |
| default: | |
| if (user_mode(regs)) | |
| return NOTIFY_DONE; | |
| } | |
| if (kgdb_handle_exception(args->trapnr, args->signr, cmd, regs)) | |
| return NOTIFY_DONE; | |
| /* Must touch watchdog before return to normal operation */ | |
| touch_nmi_watchdog(); | |
| return NOTIFY_STOP; | |
| } | |
| int kgdb_ll_trap(int cmd, const char *str, | |
| struct pt_regs *regs, long err, int trap, int sig) | |
| { | |
| struct die_args args = { | |
| .regs = regs, | |
| .str = str, | |
| .err = err, | |
| .trapnr = trap, | |
| .signr = sig, | |
| }; | |
| if (!kgdb_io_module_registered) | |
| return NOTIFY_DONE; | |
| return __kgdb_notify(&args, cmd); | |
| } | |
| static int | |
| kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr) | |
| { | |
| unsigned long flags; | |
| int ret; | |
| local_irq_save(flags); | |
| ret = __kgdb_notify(ptr, cmd); | |
| local_irq_restore(flags); | |
| return ret; | |
| } | |
| static struct notifier_block kgdb_notifier = { | |
| .notifier_call = kgdb_notify, | |
| }; | |
| /** | |
| * kgdb_arch_init - Perform any architecture specific initialization. | |
| * | |
| * This function will handle the initialization of any architecture | |
| * specific callbacks. | |
| */ | |
| int kgdb_arch_init(void) | |
| { | |
| int retval; | |
| retval = register_die_notifier(&kgdb_notifier); | |
| if (retval) | |
| goto out; | |
| retval = register_nmi_handler(NMI_LOCAL, kgdb_nmi_handler, | |
| 0, "kgdb"); | |
| if (retval) | |
| goto out1; | |
| retval = register_nmi_handler(NMI_UNKNOWN, kgdb_nmi_handler, | |
| 0, "kgdb"); | |
| if (retval) | |
| goto out2; | |
| return retval; | |
| out2: | |
| unregister_nmi_handler(NMI_LOCAL, "kgdb"); | |
| out1: | |
| unregister_die_notifier(&kgdb_notifier); | |
| out: | |
| return retval; | |
| } | |
| static void kgdb_hw_overflow_handler(struct perf_event *event, | |
| struct perf_sample_data *data, struct pt_regs *regs) | |
| { | |
| struct task_struct *tsk = current; | |
| int i; | |
| for (i = 0; i < 4; i++) | |
| if (breakinfo[i].enabled) | |
| tsk->thread.debugreg6 |= (DR_TRAP0 << i); | |
| } | |
| void kgdb_arch_late(void) | |
| { | |
| int i, cpu; | |
| struct perf_event_attr attr; | |
| struct perf_event **pevent; | |
| /* | |
| * Pre-allocate the hw breakpoint structions in the non-atomic | |
| * portion of kgdb because this operation requires mutexs to | |
| * complete. | |
| */ | |
| hw_breakpoint_init(&attr); | |
| attr.bp_addr = (unsigned long)kgdb_arch_init; | |
| attr.bp_len = HW_BREAKPOINT_LEN_1; | |
| attr.bp_type = HW_BREAKPOINT_W; | |
| attr.disabled = 1; | |
| for (i = 0; i < HBP_NUM; i++) { | |
| if (breakinfo[i].pev) | |
| continue; | |
| breakinfo[i].pev = register_wide_hw_breakpoint(&attr, NULL, NULL); | |
| if (IS_ERR((void * __force)breakinfo[i].pev)) { | |
| printk(KERN_ERR "kgdb: Could not allocate hw" | |
| "breakpoints\nDisabling the kernel debugger\n"); | |
| breakinfo[i].pev = NULL; | |
| kgdb_arch_exit(); | |
| return; | |
| } | |
| for_each_online_cpu(cpu) { | |
| pevent = per_cpu_ptr(breakinfo[i].pev, cpu); | |
| pevent[0]->hw.sample_period = 1; | |
| pevent[0]->overflow_handler = kgdb_hw_overflow_handler; | |
| if (pevent[0]->destroy != NULL) { | |
| pevent[0]->destroy = NULL; | |
| release_bp_slot(*pevent); | |
| } | |
| } | |
| } | |
| } | |
| /** | |
| * kgdb_arch_exit - Perform any architecture specific uninitalization. | |
| * | |
| * This function will handle the uninitalization of any architecture | |
| * specific callbacks, for dynamic registration and unregistration. | |
| */ | |
| void kgdb_arch_exit(void) | |
| { | |
| int i; | |
| for (i = 0; i < 4; i++) { | |
| if (breakinfo[i].pev) { | |
| unregister_wide_hw_breakpoint(breakinfo[i].pev); | |
| breakinfo[i].pev = NULL; | |
| } | |
| } | |
| unregister_nmi_handler(NMI_UNKNOWN, "kgdb"); | |
| unregister_nmi_handler(NMI_LOCAL, "kgdb"); | |
| unregister_die_notifier(&kgdb_notifier); | |
| } | |
| /** | |
| * | |
| * kgdb_skipexception - Bail out of KGDB when we've been triggered. | |
| * @exception: Exception vector number | |
| * @regs: Current &struct pt_regs. | |
| * | |
| * On some architectures we need to skip a breakpoint exception when | |
| * it occurs after a breakpoint has been removed. | |
| * | |
| * Skip an int3 exception when it occurs after a breakpoint has been | |
| * removed. Backtrack eip by 1 since the int3 would have caused it to | |
| * increment by 1. | |
| */ | |
| int kgdb_skipexception(int exception, struct pt_regs *regs) | |
| { | |
| if (exception == 3 && kgdb_isremovedbreak(regs->ip - 1)) { | |
| regs->ip -= 1; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs) | |
| { | |
| if (exception == 3) | |
| return instruction_pointer(regs) - 1; | |
| return instruction_pointer(regs); | |
| } | |
| void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip) | |
| { | |
| regs->ip = ip; | |
| } | |
| int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt) | |
| { | |
| int err; | |
| char opc[BREAK_INSTR_SIZE]; | |
| bpt->type = BP_BREAKPOINT; | |
| err = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr, | |
| BREAK_INSTR_SIZE); | |
| if (err) | |
| return err; | |
| err = probe_kernel_write((char *)bpt->bpt_addr, | |
| arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE); | |
| if (!err) | |
| return err; | |
| /* | |
| * It is safe to call text_poke() because normal kernel execution | |
| * is stopped on all cores, so long as the text_mutex is not locked. | |
| */ | |
| if (mutex_is_locked(&text_mutex)) | |
| return -EBUSY; | |
| text_poke((void *)bpt->bpt_addr, arch_kgdb_ops.gdb_bpt_instr, | |
| BREAK_INSTR_SIZE); | |
| err = probe_kernel_read(opc, (char *)bpt->bpt_addr, BREAK_INSTR_SIZE); | |
| if (err) | |
| return err; | |
| if (memcmp(opc, arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE)) | |
| return -EINVAL; | |
| bpt->type = BP_POKE_BREAKPOINT; | |
| return err; | |
| } | |
| int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt) | |
| { | |
| int err; | |
| char opc[BREAK_INSTR_SIZE]; | |
| if (bpt->type != BP_POKE_BREAKPOINT) | |
| goto knl_write; | |
| /* | |
| * It is safe to call text_poke() because normal kernel execution | |
| * is stopped on all cores, so long as the text_mutex is not locked. | |
| */ | |
| if (mutex_is_locked(&text_mutex)) | |
| goto knl_write; | |
| text_poke((void *)bpt->bpt_addr, bpt->saved_instr, BREAK_INSTR_SIZE); | |
| err = probe_kernel_read(opc, (char *)bpt->bpt_addr, BREAK_INSTR_SIZE); | |
| if (err || memcmp(opc, bpt->saved_instr, BREAK_INSTR_SIZE)) | |
| goto knl_write; | |
| return err; | |
| knl_write: | |
| return probe_kernel_write((char *)bpt->bpt_addr, | |
| (char *)bpt->saved_instr, BREAK_INSTR_SIZE); | |
| } | |
| struct kgdb_arch arch_kgdb_ops = { | |
| /* Breakpoint instruction: */ | |
| .gdb_bpt_instr = { 0xcc }, | |
| .flags = KGDB_HW_BREAKPOINT, | |
| .set_hw_breakpoint = kgdb_set_hw_break, | |
| .remove_hw_breakpoint = kgdb_remove_hw_break, | |
| .disable_hw_break = kgdb_disable_hw_debug, | |
| .remove_all_hw_break = kgdb_remove_all_hw_break, | |
| .correct_hw_break = kgdb_correct_hw_break, | |
| }; |