| /* | |
| * x86 single-step support code, common to 32-bit and 64-bit. | |
| */ | |
| #include <linux/sched.h> | |
| #include <linux/mm.h> | |
| #include <linux/ptrace.h> | |
| #include <asm/desc.h> | |
| #include <asm/mmu_context.h> | |
| unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs) | |
| { | |
| unsigned long addr, seg; | |
| addr = regs->ip; | |
| seg = regs->cs & 0xffff; | |
| if (v8086_mode(regs)) { | |
| addr = (addr & 0xffff) + (seg << 4); | |
| return addr; | |
| } | |
| #ifdef CONFIG_MODIFY_LDT_SYSCALL | |
| /* | |
| * We'll assume that the code segments in the GDT | |
| * are all zero-based. That is largely true: the | |
| * TLS segments are used for data, and the PNPBIOS | |
| * and APM bios ones we just ignore here. | |
| */ | |
| if ((seg & SEGMENT_TI_MASK) == SEGMENT_LDT) { | |
| struct desc_struct *desc; | |
| unsigned long base; | |
| seg >>= 3; | |
| mutex_lock(&child->mm->context.lock); | |
| if (unlikely(!child->mm->context.ldt || | |
| seg >= child->mm->context.ldt->size)) | |
| addr = -1L; /* bogus selector, access would fault */ | |
| else { | |
| desc = &child->mm->context.ldt->entries[seg]; | |
| base = get_desc_base(desc); | |
| /* 16-bit code segment? */ | |
| if (!desc->d) | |
| addr &= 0xffff; | |
| addr += base; | |
| } | |
| mutex_unlock(&child->mm->context.lock); | |
| } | |
| #endif | |
| return addr; | |
| } | |
| static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs) | |
| { | |
| int i, copied; | |
| unsigned char opcode[15]; | |
| unsigned long addr = convert_ip_to_linear(child, regs); | |
| copied = access_process_vm(child, addr, opcode, sizeof(opcode), | |
| FOLL_FORCE); | |
| for (i = 0; i < copied; i++) { | |
| switch (opcode[i]) { | |
| /* popf and iret */ | |
| case 0x9d: case 0xcf: | |
| return 1; | |
| /* CHECKME: 64 65 */ | |
| /* opcode and address size prefixes */ | |
| case 0x66: case 0x67: | |
| continue; | |
| /* irrelevant prefixes (segment overrides and repeats) */ | |
| case 0x26: case 0x2e: | |
| case 0x36: case 0x3e: | |
| case 0x64: case 0x65: | |
| case 0xf0: case 0xf2: case 0xf3: | |
| continue; | |
| #ifdef CONFIG_X86_64 | |
| case 0x40 ... 0x4f: | |
| if (!user_64bit_mode(regs)) | |
| /* 32-bit mode: register increment */ | |
| return 0; | |
| /* 64-bit mode: REX prefix */ | |
| continue; | |
| #endif | |
| /* CHECKME: f2, f3 */ | |
| /* | |
| * pushf: NOTE! We should probably not let | |
| * the user see the TF bit being set. But | |
| * it's more pain than it's worth to avoid | |
| * it, and a debugger could emulate this | |
| * all in user space if it _really_ cares. | |
| */ | |
| case 0x9c: | |
| default: | |
| return 0; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Enable single-stepping. Return nonzero if user mode is not using TF itself. | |
| */ | |
| static int enable_single_step(struct task_struct *child) | |
| { | |
| struct pt_regs *regs = task_pt_regs(child); | |
| unsigned long oflags; | |
| /* | |
| * If we stepped into a sysenter/syscall insn, it trapped in | |
| * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP. | |
| * If user-mode had set TF itself, then it's still clear from | |
| * do_debug() and we need to set it again to restore the user | |
| * state so we don't wrongly set TIF_FORCED_TF below. | |
| * If enable_single_step() was used last and that is what | |
| * set TIF_SINGLESTEP, then both TF and TIF_FORCED_TF are | |
| * already set and our bookkeeping is fine. | |
| */ | |
| if (unlikely(test_tsk_thread_flag(child, TIF_SINGLESTEP))) | |
| regs->flags |= X86_EFLAGS_TF; | |
| /* | |
| * Always set TIF_SINGLESTEP - this guarantees that | |
| * we single-step system calls etc.. This will also | |
| * cause us to set TF when returning to user mode. | |
| */ | |
| set_tsk_thread_flag(child, TIF_SINGLESTEP); | |
| oflags = regs->flags; | |
| /* Set TF on the kernel stack.. */ | |
| regs->flags |= X86_EFLAGS_TF; | |
| /* | |
| * ..but if TF is changed by the instruction we will trace, | |
| * don't mark it as being "us" that set it, so that we | |
| * won't clear it by hand later. | |
| * | |
| * Note that if we don't actually execute the popf because | |
| * of a signal arriving right now or suchlike, we will lose | |
| * track of the fact that it really was "us" that set it. | |
| */ | |
| if (is_setting_trap_flag(child, regs)) { | |
| clear_tsk_thread_flag(child, TIF_FORCED_TF); | |
| return 0; | |
| } | |
| /* | |
| * If TF was already set, check whether it was us who set it. | |
| * If not, we should never attempt a block step. | |
| */ | |
| if (oflags & X86_EFLAGS_TF) | |
| return test_tsk_thread_flag(child, TIF_FORCED_TF); | |
| set_tsk_thread_flag(child, TIF_FORCED_TF); | |
| return 1; | |
| } | |
| void set_task_blockstep(struct task_struct *task, bool on) | |
| { | |
| unsigned long debugctl; | |
| /* | |
| * Ensure irq/preemption can't change debugctl in between. | |
| * Note also that both TIF_BLOCKSTEP and debugctl should | |
| * be changed atomically wrt preemption. | |
| * | |
| * NOTE: this means that set/clear TIF_BLOCKSTEP is only safe if | |
| * task is current or it can't be running, otherwise we can race | |
| * with __switch_to_xtra(). We rely on ptrace_freeze_traced() but | |
| * PTRACE_KILL is not safe. | |
| */ | |
| local_irq_disable(); | |
| debugctl = get_debugctlmsr(); | |
| if (on) { | |
| debugctl |= DEBUGCTLMSR_BTF; | |
| set_tsk_thread_flag(task, TIF_BLOCKSTEP); | |
| } else { | |
| debugctl &= ~DEBUGCTLMSR_BTF; | |
| clear_tsk_thread_flag(task, TIF_BLOCKSTEP); | |
| } | |
| if (task == current) | |
| update_debugctlmsr(debugctl); | |
| local_irq_enable(); | |
| } | |
| /* | |
| * Enable single or block step. | |
| */ | |
| static void enable_step(struct task_struct *child, bool block) | |
| { | |
| /* | |
| * Make sure block stepping (BTF) is not enabled unless it should be. | |
| * Note that we don't try to worry about any is_setting_trap_flag() | |
| * instructions after the first when using block stepping. | |
| * So no one should try to use debugger block stepping in a program | |
| * that uses user-mode single stepping itself. | |
| */ | |
| if (enable_single_step(child) && block) | |
| set_task_blockstep(child, true); | |
| else if (test_tsk_thread_flag(child, TIF_BLOCKSTEP)) | |
| set_task_blockstep(child, false); | |
| } | |
| void user_enable_single_step(struct task_struct *child) | |
| { | |
| enable_step(child, 0); | |
| } | |
| void user_enable_block_step(struct task_struct *child) | |
| { | |
| enable_step(child, 1); | |
| } | |
| void user_disable_single_step(struct task_struct *child) | |
| { | |
| /* | |
| * Make sure block stepping (BTF) is disabled. | |
| */ | |
| if (test_tsk_thread_flag(child, TIF_BLOCKSTEP)) | |
| set_task_blockstep(child, false); | |
| /* Always clear TIF_SINGLESTEP... */ | |
| clear_tsk_thread_flag(child, TIF_SINGLESTEP); | |
| /* But touch TF only if it was set by us.. */ | |
| if (test_and_clear_tsk_thread_flag(child, TIF_FORCED_TF)) | |
| task_pt_regs(child)->flags &= ~X86_EFLAGS_TF; | |
| } |