| /* | |
| * arch/xtensa/kernel/setup.c | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (C) 1995 Linus Torvalds | |
| * Copyright (C) 2001 - 2005 Tensilica Inc. | |
| * Copyright (C) 2014 - 2016 Cadence Design Systems Inc. | |
| * | |
| * Chris Zankel <chris@zankel.net> | |
| * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> | |
| * Kevin Chea | |
| * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca> | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/init.h> | |
| #include <linux/mm.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/screen_info.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/kernel.h> | |
| #include <linux/percpu.h> | |
| #include <linux/cpu.h> | |
| #include <linux/of.h> | |
| #include <linux/of_fdt.h> | |
| #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) | |
| # include <linux/console.h> | |
| #endif | |
| #ifdef CONFIG_RTC | |
| # include <linux/timex.h> | |
| #endif | |
| #ifdef CONFIG_PROC_FS | |
| # include <linux/seq_file.h> | |
| #endif | |
| #include <asm/bootparam.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/processor.h> | |
| #include <asm/timex.h> | |
| #include <asm/platform.h> | |
| #include <asm/page.h> | |
| #include <asm/setup.h> | |
| #include <asm/param.h> | |
| #include <asm/traps.h> | |
| #include <asm/smp.h> | |
| #include <asm/sysmem.h> | |
| #include <platform/hardware.h> | |
| #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) | |
| struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16}; | |
| #endif | |
| #ifdef CONFIG_BLK_DEV_FD | |
| extern struct fd_ops no_fd_ops; | |
| struct fd_ops *fd_ops; | |
| #endif | |
| extern struct rtc_ops no_rtc_ops; | |
| struct rtc_ops *rtc_ops; | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| extern unsigned long initrd_start; | |
| extern unsigned long initrd_end; | |
| int initrd_is_mapped = 0; | |
| extern int initrd_below_start_ok; | |
| #endif | |
| #ifdef CONFIG_OF | |
| void *dtb_start = __dtb_start; | |
| #endif | |
| unsigned char aux_device_present; | |
| extern unsigned long loops_per_jiffy; | |
| /* Command line specified as configuration option. */ | |
| static char __initdata command_line[COMMAND_LINE_SIZE]; | |
| #ifdef CONFIG_CMDLINE_BOOL | |
| static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; | |
| #endif | |
| /* | |
| * Boot parameter parsing. | |
| * | |
| * The Xtensa port uses a list of variable-sized tags to pass data to | |
| * the kernel. The first tag must be a BP_TAG_FIRST tag for the list | |
| * to be recognised. The list is terminated with a zero-sized | |
| * BP_TAG_LAST tag. | |
| */ | |
| typedef struct tagtable { | |
| u32 tag; | |
| int (*parse)(const bp_tag_t*); | |
| } tagtable_t; | |
| #define __tagtable(tag, fn) static tagtable_t __tagtable_##fn \ | |
| __attribute__((used, section(".taglist"))) = { tag, fn } | |
| /* parse current tag */ | |
| static int __init parse_tag_mem(const bp_tag_t *tag) | |
| { | |
| struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data); | |
| if (mi->type != MEMORY_TYPE_CONVENTIONAL) | |
| return -1; | |
| return memblock_add(mi->start, mi->end - mi->start); | |
| } | |
| __tagtable(BP_TAG_MEMORY, parse_tag_mem); | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| static int __init parse_tag_initrd(const bp_tag_t* tag) | |
| { | |
| struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data); | |
| initrd_start = (unsigned long)__va(mi->start); | |
| initrd_end = (unsigned long)__va(mi->end); | |
| return 0; | |
| } | |
| __tagtable(BP_TAG_INITRD, parse_tag_initrd); | |
| #ifdef CONFIG_OF | |
| static int __init parse_tag_fdt(const bp_tag_t *tag) | |
| { | |
| dtb_start = __va(tag->data[0]); | |
| return 0; | |
| } | |
| __tagtable(BP_TAG_FDT, parse_tag_fdt); | |
| #endif /* CONFIG_OF */ | |
| #endif /* CONFIG_BLK_DEV_INITRD */ | |
| static int __init parse_tag_cmdline(const bp_tag_t* tag) | |
| { | |
| strlcpy(command_line, (char *)(tag->data), COMMAND_LINE_SIZE); | |
| return 0; | |
| } | |
| __tagtable(BP_TAG_COMMAND_LINE, parse_tag_cmdline); | |
| static int __init parse_bootparam(const bp_tag_t* tag) | |
| { | |
| extern tagtable_t __tagtable_begin, __tagtable_end; | |
| tagtable_t *t; | |
| /* Boot parameters must start with a BP_TAG_FIRST tag. */ | |
| if (tag->id != BP_TAG_FIRST) { | |
| printk(KERN_WARNING "Invalid boot parameters!\n"); | |
| return 0; | |
| } | |
| tag = (bp_tag_t*)((unsigned long)tag + sizeof(bp_tag_t) + tag->size); | |
| /* Parse all tags. */ | |
| while (tag != NULL && tag->id != BP_TAG_LAST) { | |
| for (t = &__tagtable_begin; t < &__tagtable_end; t++) { | |
| if (tag->id == t->tag) { | |
| t->parse(tag); | |
| break; | |
| } | |
| } | |
| if (t == &__tagtable_end) | |
| printk(KERN_WARNING "Ignoring tag " | |
| "0x%08x\n", tag->id); | |
| tag = (bp_tag_t*)((unsigned long)(tag + 1) + tag->size); | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_OF | |
| #if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY | |
| unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR; | |
| EXPORT_SYMBOL(xtensa_kio_paddr); | |
| static int __init xtensa_dt_io_area(unsigned long node, const char *uname, | |
| int depth, void *data) | |
| { | |
| const __be32 *ranges; | |
| int len; | |
| if (depth > 1) | |
| return 0; | |
| if (!of_flat_dt_is_compatible(node, "simple-bus")) | |
| return 0; | |
| ranges = of_get_flat_dt_prop(node, "ranges", &len); | |
| if (!ranges) | |
| return 1; | |
| if (len == 0) | |
| return 1; | |
| xtensa_kio_paddr = of_read_ulong(ranges+1, 1); | |
| /* round down to nearest 256MB boundary */ | |
| xtensa_kio_paddr &= 0xf0000000; | |
| return 1; | |
| } | |
| #else | |
| static int __init xtensa_dt_io_area(unsigned long node, const char *uname, | |
| int depth, void *data) | |
| { | |
| return 1; | |
| } | |
| #endif | |
| void __init early_init_dt_add_memory_arch(u64 base, u64 size) | |
| { | |
| size &= PAGE_MASK; | |
| memblock_add(base, size); | |
| } | |
| void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) | |
| { | |
| return __alloc_bootmem(size, align, 0); | |
| } | |
| void __init early_init_devtree(void *params) | |
| { | |
| early_init_dt_scan(params); | |
| of_scan_flat_dt(xtensa_dt_io_area, NULL); | |
| if (!command_line[0]) | |
| strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); | |
| } | |
| #endif /* CONFIG_OF */ | |
| /* | |
| * Initialize architecture. (Early stage) | |
| */ | |
| void __init init_arch(bp_tag_t *bp_start) | |
| { | |
| /* Parse boot parameters */ | |
| if (bp_start) | |
| parse_bootparam(bp_start); | |
| #ifdef CONFIG_OF | |
| early_init_devtree(dtb_start); | |
| #endif | |
| #ifdef CONFIG_CMDLINE_BOOL | |
| if (!command_line[0]) | |
| strlcpy(command_line, default_command_line, COMMAND_LINE_SIZE); | |
| #endif | |
| /* Early hook for platforms */ | |
| platform_init(bp_start); | |
| /* Initialize MMU. */ | |
| init_mmu(); | |
| } | |
| /* | |
| * Initialize system. Setup memory and reserve regions. | |
| */ | |
| extern char _end; | |
| extern char _stext; | |
| extern char _WindowVectors_text_start; | |
| extern char _WindowVectors_text_end; | |
| extern char _DebugInterruptVector_literal_start; | |
| extern char _DebugInterruptVector_text_end; | |
| extern char _KernelExceptionVector_literal_start; | |
| extern char _KernelExceptionVector_text_end; | |
| extern char _UserExceptionVector_literal_start; | |
| extern char _UserExceptionVector_text_end; | |
| extern char _DoubleExceptionVector_literal_start; | |
| extern char _DoubleExceptionVector_text_end; | |
| #if XCHAL_EXCM_LEVEL >= 2 | |
| extern char _Level2InterruptVector_text_start; | |
| extern char _Level2InterruptVector_text_end; | |
| #endif | |
| #if XCHAL_EXCM_LEVEL >= 3 | |
| extern char _Level3InterruptVector_text_start; | |
| extern char _Level3InterruptVector_text_end; | |
| #endif | |
| #if XCHAL_EXCM_LEVEL >= 4 | |
| extern char _Level4InterruptVector_text_start; | |
| extern char _Level4InterruptVector_text_end; | |
| #endif | |
| #if XCHAL_EXCM_LEVEL >= 5 | |
| extern char _Level5InterruptVector_text_start; | |
| extern char _Level5InterruptVector_text_end; | |
| #endif | |
| #if XCHAL_EXCM_LEVEL >= 6 | |
| extern char _Level6InterruptVector_text_start; | |
| extern char _Level6InterruptVector_text_end; | |
| #endif | |
| #ifdef CONFIG_SMP | |
| extern char _SecondaryResetVector_text_start; | |
| extern char _SecondaryResetVector_text_end; | |
| #endif | |
| #ifdef CONFIG_S32C1I_SELFTEST | |
| #if XCHAL_HAVE_S32C1I | |
| static int __initdata rcw_word, rcw_probe_pc, rcw_exc; | |
| /* | |
| * Basic atomic compare-and-swap, that records PC of S32C1I for probing. | |
| * | |
| * If *v == cmp, set *v = set. Return previous *v. | |
| */ | |
| static inline int probed_compare_swap(int *v, int cmp, int set) | |
| { | |
| int tmp; | |
| __asm__ __volatile__( | |
| " movi %1, 1f\n" | |
| " s32i %1, %4, 0\n" | |
| " wsr %2, scompare1\n" | |
| "1: s32c1i %0, %3, 0\n" | |
| : "=a" (set), "=&a" (tmp) | |
| : "a" (cmp), "a" (v), "a" (&rcw_probe_pc), "0" (set) | |
| : "memory" | |
| ); | |
| return set; | |
| } | |
| /* Handle probed exception */ | |
| static void __init do_probed_exception(struct pt_regs *regs, | |
| unsigned long exccause) | |
| { | |
| if (regs->pc == rcw_probe_pc) { /* exception on s32c1i ? */ | |
| regs->pc += 3; /* skip the s32c1i instruction */ | |
| rcw_exc = exccause; | |
| } else { | |
| do_unhandled(regs, exccause); | |
| } | |
| } | |
| /* Simple test of S32C1I (soc bringup assist) */ | |
| static int __init check_s32c1i(void) | |
| { | |
| int n, cause1, cause2; | |
| void *handbus, *handdata, *handaddr; /* temporarily saved handlers */ | |
| rcw_probe_pc = 0; | |
| handbus = trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR, | |
| do_probed_exception); | |
| handdata = trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR, | |
| do_probed_exception); | |
| handaddr = trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR, | |
| do_probed_exception); | |
| /* First try an S32C1I that does not store: */ | |
| rcw_exc = 0; | |
| rcw_word = 1; | |
| n = probed_compare_swap(&rcw_word, 0, 2); | |
| cause1 = rcw_exc; | |
| /* took exception? */ | |
| if (cause1 != 0) { | |
| /* unclean exception? */ | |
| if (n != 2 || rcw_word != 1) | |
| panic("S32C1I exception error"); | |
| } else if (rcw_word != 1 || n != 1) { | |
| panic("S32C1I compare error"); | |
| } | |
| /* Then an S32C1I that stores: */ | |
| rcw_exc = 0; | |
| rcw_word = 0x1234567; | |
| n = probed_compare_swap(&rcw_word, 0x1234567, 0xabcde); | |
| cause2 = rcw_exc; | |
| if (cause2 != 0) { | |
| /* unclean exception? */ | |
| if (n != 0xabcde || rcw_word != 0x1234567) | |
| panic("S32C1I exception error (b)"); | |
| } else if (rcw_word != 0xabcde || n != 0x1234567) { | |
| panic("S32C1I store error"); | |
| } | |
| /* Verify consistency of exceptions: */ | |
| if (cause1 || cause2) { | |
| pr_warn("S32C1I took exception %d, %d\n", cause1, cause2); | |
| /* If emulation of S32C1I upon bus error gets implemented, | |
| we can get rid of this panic for single core (not SMP) */ | |
| panic("S32C1I exceptions not currently supported"); | |
| } | |
| if (cause1 != cause2) | |
| panic("inconsistent S32C1I exceptions"); | |
| trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR, handbus); | |
| trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR, handdata); | |
| trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR, handaddr); | |
| return 0; | |
| } | |
| #else /* XCHAL_HAVE_S32C1I */ | |
| /* This condition should not occur with a commercially deployed processor. | |
| Display reminder for early engr test or demo chips / FPGA bitstreams */ | |
| static int __init check_s32c1i(void) | |
| { | |
| pr_warn("Processor configuration lacks atomic compare-and-swap support!\n"); | |
| return 0; | |
| } | |
| #endif /* XCHAL_HAVE_S32C1I */ | |
| early_initcall(check_s32c1i); | |
| #endif /* CONFIG_S32C1I_SELFTEST */ | |
| static inline int mem_reserve(unsigned long start, unsigned long end) | |
| { | |
| return memblock_reserve(start, end - start); | |
| } | |
| void __init setup_arch(char **cmdline_p) | |
| { | |
| strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); | |
| *cmdline_p = command_line; | |
| /* Reserve some memory regions */ | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| if (initrd_start < initrd_end) { | |
| initrd_is_mapped = mem_reserve(__pa(initrd_start), | |
| __pa(initrd_end)) == 0; | |
| initrd_below_start_ok = 1; | |
| } else { | |
| initrd_start = 0; | |
| } | |
| #endif | |
| mem_reserve(__pa(&_stext), __pa(&_end)); | |
| mem_reserve(__pa(&_WindowVectors_text_start), | |
| __pa(&_WindowVectors_text_end)); | |
| mem_reserve(__pa(&_DebugInterruptVector_literal_start), | |
| __pa(&_DebugInterruptVector_text_end)); | |
| mem_reserve(__pa(&_KernelExceptionVector_literal_start), | |
| __pa(&_KernelExceptionVector_text_end)); | |
| mem_reserve(__pa(&_UserExceptionVector_literal_start), | |
| __pa(&_UserExceptionVector_text_end)); | |
| mem_reserve(__pa(&_DoubleExceptionVector_literal_start), | |
| __pa(&_DoubleExceptionVector_text_end)); | |
| #if XCHAL_EXCM_LEVEL >= 2 | |
| mem_reserve(__pa(&_Level2InterruptVector_text_start), | |
| __pa(&_Level2InterruptVector_text_end)); | |
| #endif | |
| #if XCHAL_EXCM_LEVEL >= 3 | |
| mem_reserve(__pa(&_Level3InterruptVector_text_start), | |
| __pa(&_Level3InterruptVector_text_end)); | |
| #endif | |
| #if XCHAL_EXCM_LEVEL >= 4 | |
| mem_reserve(__pa(&_Level4InterruptVector_text_start), | |
| __pa(&_Level4InterruptVector_text_end)); | |
| #endif | |
| #if XCHAL_EXCM_LEVEL >= 5 | |
| mem_reserve(__pa(&_Level5InterruptVector_text_start), | |
| __pa(&_Level5InterruptVector_text_end)); | |
| #endif | |
| #if XCHAL_EXCM_LEVEL >= 6 | |
| mem_reserve(__pa(&_Level6InterruptVector_text_start), | |
| __pa(&_Level6InterruptVector_text_end)); | |
| #endif | |
| #ifdef CONFIG_SMP | |
| mem_reserve(__pa(&_SecondaryResetVector_text_start), | |
| __pa(&_SecondaryResetVector_text_end)); | |
| #endif | |
| parse_early_param(); | |
| bootmem_init(); | |
| unflatten_and_copy_device_tree(); | |
| platform_setup(cmdline_p); | |
| #ifdef CONFIG_SMP | |
| smp_init_cpus(); | |
| #endif | |
| paging_init(); | |
| zones_init(); | |
| #ifdef CONFIG_VT | |
| # if defined(CONFIG_VGA_CONSOLE) | |
| conswitchp = &vga_con; | |
| # elif defined(CONFIG_DUMMY_CONSOLE) | |
| conswitchp = &dummy_con; | |
| # endif | |
| #endif | |
| #ifdef CONFIG_PCI | |
| platform_pcibios_init(); | |
| #endif | |
| } | |
| static DEFINE_PER_CPU(struct cpu, cpu_data); | |
| static int __init topology_init(void) | |
| { | |
| int i; | |
| for_each_possible_cpu(i) { | |
| struct cpu *cpu = &per_cpu(cpu_data, i); | |
| cpu->hotpluggable = !!i; | |
| register_cpu(cpu, i); | |
| } | |
| return 0; | |
| } | |
| subsys_initcall(topology_init); | |
| void cpu_reset(void) | |
| { | |
| #if XCHAL_HAVE_PTP_MMU | |
| local_irq_disable(); | |
| /* | |
| * We have full MMU: all autoload ways, ways 7, 8 and 9 of DTLB must | |
| * be flushed. | |
| * Way 4 is not currently used by linux. | |
| * Ways 5 and 6 shall not be touched on MMUv2 as they are hardwired. | |
| * Way 5 shall be flushed and way 6 shall be set to identity mapping | |
| * on MMUv3. | |
| */ | |
| local_flush_tlb_all(); | |
| invalidate_page_directory(); | |
| #if XCHAL_HAVE_SPANNING_WAY | |
| /* MMU v3 */ | |
| { | |
| unsigned long vaddr = (unsigned long)cpu_reset; | |
| unsigned long paddr = __pa(vaddr); | |
| unsigned long tmpaddr = vaddr + SZ_512M; | |
| unsigned long tmp0, tmp1, tmp2, tmp3; | |
| /* | |
| * Find a place for the temporary mapping. It must not be | |
| * in the same 512MB region with vaddr or paddr, otherwise | |
| * there may be multihit exception either on entry to the | |
| * temporary mapping, or on entry to the identity mapping. | |
| * (512MB is the biggest page size supported by TLB.) | |
| */ | |
| while (((tmpaddr ^ paddr) & -SZ_512M) == 0) | |
| tmpaddr += SZ_512M; | |
| /* Invalidate mapping in the selected temporary area */ | |
| if (itlb_probe(tmpaddr) & 0x8) | |
| invalidate_itlb_entry(itlb_probe(tmpaddr)); | |
| if (itlb_probe(tmpaddr + PAGE_SIZE) & 0x8) | |
| invalidate_itlb_entry(itlb_probe(tmpaddr + PAGE_SIZE)); | |
| /* | |
| * Map two consecutive pages starting at the physical address | |
| * of this function to the temporary mapping area. | |
| */ | |
| write_itlb_entry(__pte((paddr & PAGE_MASK) | | |
| _PAGE_HW_VALID | | |
| _PAGE_HW_EXEC | | |
| _PAGE_CA_BYPASS), | |
| tmpaddr & PAGE_MASK); | |
| write_itlb_entry(__pte(((paddr & PAGE_MASK) + PAGE_SIZE) | | |
| _PAGE_HW_VALID | | |
| _PAGE_HW_EXEC | | |
| _PAGE_CA_BYPASS), | |
| (tmpaddr & PAGE_MASK) + PAGE_SIZE); | |
| /* Reinitialize TLB */ | |
| __asm__ __volatile__ ("movi %0, 1f\n\t" | |
| "movi %3, 2f\n\t" | |
| "add %0, %0, %4\n\t" | |
| "add %3, %3, %5\n\t" | |
| "jx %0\n" | |
| /* | |
| * No literal, data or stack access | |
| * below this point | |
| */ | |
| "1:\n\t" | |
| /* Initialize *tlbcfg */ | |
| "movi %0, 0\n\t" | |
| "wsr %0, itlbcfg\n\t" | |
| "wsr %0, dtlbcfg\n\t" | |
| /* Invalidate TLB way 5 */ | |
| "movi %0, 4\n\t" | |
| "movi %1, 5\n" | |
| "1:\n\t" | |
| "iitlb %1\n\t" | |
| "idtlb %1\n\t" | |
| "add %1, %1, %6\n\t" | |
| "addi %0, %0, -1\n\t" | |
| "bnez %0, 1b\n\t" | |
| /* Initialize TLB way 6 */ | |
| "movi %0, 7\n\t" | |
| "addi %1, %9, 3\n\t" | |
| "addi %2, %9, 6\n" | |
| "1:\n\t" | |
| "witlb %1, %2\n\t" | |
| "wdtlb %1, %2\n\t" | |
| "add %1, %1, %7\n\t" | |
| "add %2, %2, %7\n\t" | |
| "addi %0, %0, -1\n\t" | |
| "bnez %0, 1b\n\t" | |
| /* Jump to identity mapping */ | |
| "jx %3\n" | |
| "2:\n\t" | |
| /* Complete way 6 initialization */ | |
| "witlb %1, %2\n\t" | |
| "wdtlb %1, %2\n\t" | |
| /* Invalidate temporary mapping */ | |
| "sub %0, %9, %7\n\t" | |
| "iitlb %0\n\t" | |
| "add %0, %0, %8\n\t" | |
| "iitlb %0" | |
| : "=&a"(tmp0), "=&a"(tmp1), "=&a"(tmp2), | |
| "=&a"(tmp3) | |
| : "a"(tmpaddr - vaddr), | |
| "a"(paddr - vaddr), | |
| "a"(SZ_128M), "a"(SZ_512M), | |
| "a"(PAGE_SIZE), | |
| "a"((tmpaddr + SZ_512M) & PAGE_MASK) | |
| : "memory"); | |
| } | |
| #endif | |
| #endif | |
| __asm__ __volatile__ ("movi a2, 0\n\t" | |
| "wsr a2, icountlevel\n\t" | |
| "movi a2, 0\n\t" | |
| "wsr a2, icount\n\t" | |
| #if XCHAL_NUM_IBREAK > 0 | |
| "wsr a2, ibreakenable\n\t" | |
| #endif | |
| #if XCHAL_HAVE_LOOPS | |
| "wsr a2, lcount\n\t" | |
| #endif | |
| "movi a2, 0x1f\n\t" | |
| "wsr a2, ps\n\t" | |
| "isync\n\t" | |
| "jx %0\n\t" | |
| : | |
| : "a" (XCHAL_RESET_VECTOR_VADDR) | |
| : "a2"); | |
| for (;;) | |
| ; | |
| } | |
| void machine_restart(char * cmd) | |
| { | |
| platform_restart(); | |
| } | |
| void machine_halt(void) | |
| { | |
| platform_halt(); | |
| while (1); | |
| } | |
| void machine_power_off(void) | |
| { | |
| platform_power_off(); | |
| while (1); | |
| } | |
| #ifdef CONFIG_PROC_FS | |
| /* | |
| * Display some core information through /proc/cpuinfo. | |
| */ | |
| static int | |
| c_show(struct seq_file *f, void *slot) | |
| { | |
| /* high-level stuff */ | |
| seq_printf(f, "CPU count\t: %u\n" | |
| "CPU list\t: %*pbl\n" | |
| "vendor_id\t: Tensilica\n" | |
| "model\t\t: Xtensa " XCHAL_HW_VERSION_NAME "\n" | |
| "core ID\t\t: " XCHAL_CORE_ID "\n" | |
| "build ID\t: 0x%x\n" | |
| "byte order\t: %s\n" | |
| "cpu MHz\t\t: %lu.%02lu\n" | |
| "bogomips\t: %lu.%02lu\n", | |
| num_online_cpus(), | |
| cpumask_pr_args(cpu_online_mask), | |
| XCHAL_BUILD_UNIQUE_ID, | |
| XCHAL_HAVE_BE ? "big" : "little", | |
| ccount_freq/1000000, | |
| (ccount_freq/10000) % 100, | |
| loops_per_jiffy/(500000/HZ), | |
| (loops_per_jiffy/(5000/HZ)) % 100); | |
| seq_printf(f,"flags\t\t: " | |
| #if XCHAL_HAVE_NMI | |
| "nmi " | |
| #endif | |
| #if XCHAL_HAVE_DEBUG | |
| "debug " | |
| # if XCHAL_HAVE_OCD | |
| "ocd " | |
| # endif | |
| #endif | |
| #if XCHAL_HAVE_DENSITY | |
| "density " | |
| #endif | |
| #if XCHAL_HAVE_BOOLEANS | |
| "boolean " | |
| #endif | |
| #if XCHAL_HAVE_LOOPS | |
| "loop " | |
| #endif | |
| #if XCHAL_HAVE_NSA | |
| "nsa " | |
| #endif | |
| #if XCHAL_HAVE_MINMAX | |
| "minmax " | |
| #endif | |
| #if XCHAL_HAVE_SEXT | |
| "sext " | |
| #endif | |
| #if XCHAL_HAVE_CLAMPS | |
| "clamps " | |
| #endif | |
| #if XCHAL_HAVE_MAC16 | |
| "mac16 " | |
| #endif | |
| #if XCHAL_HAVE_MUL16 | |
| "mul16 " | |
| #endif | |
| #if XCHAL_HAVE_MUL32 | |
| "mul32 " | |
| #endif | |
| #if XCHAL_HAVE_MUL32_HIGH | |
| "mul32h " | |
| #endif | |
| #if XCHAL_HAVE_FP | |
| "fpu " | |
| #endif | |
| #if XCHAL_HAVE_S32C1I | |
| "s32c1i " | |
| #endif | |
| "\n"); | |
| /* Registers. */ | |
| seq_printf(f,"physical aregs\t: %d\n" | |
| "misc regs\t: %d\n" | |
| "ibreak\t\t: %d\n" | |
| "dbreak\t\t: %d\n", | |
| XCHAL_NUM_AREGS, | |
| XCHAL_NUM_MISC_REGS, | |
| XCHAL_NUM_IBREAK, | |
| XCHAL_NUM_DBREAK); | |
| /* Interrupt. */ | |
| seq_printf(f,"num ints\t: %d\n" | |
| "ext ints\t: %d\n" | |
| "int levels\t: %d\n" | |
| "timers\t\t: %d\n" | |
| "debug level\t: %d\n", | |
| XCHAL_NUM_INTERRUPTS, | |
| XCHAL_NUM_EXTINTERRUPTS, | |
| XCHAL_NUM_INTLEVELS, | |
| XCHAL_NUM_TIMERS, | |
| XCHAL_DEBUGLEVEL); | |
| /* Cache */ | |
| seq_printf(f,"icache line size: %d\n" | |
| "icache ways\t: %d\n" | |
| "icache size\t: %d\n" | |
| "icache flags\t: " | |
| #if XCHAL_ICACHE_LINE_LOCKABLE | |
| "lock " | |
| #endif | |
| "\n" | |
| "dcache line size: %d\n" | |
| "dcache ways\t: %d\n" | |
| "dcache size\t: %d\n" | |
| "dcache flags\t: " | |
| #if XCHAL_DCACHE_IS_WRITEBACK | |
| "writeback " | |
| #endif | |
| #if XCHAL_DCACHE_LINE_LOCKABLE | |
| "lock " | |
| #endif | |
| "\n", | |
| XCHAL_ICACHE_LINESIZE, | |
| XCHAL_ICACHE_WAYS, | |
| XCHAL_ICACHE_SIZE, | |
| XCHAL_DCACHE_LINESIZE, | |
| XCHAL_DCACHE_WAYS, | |
| XCHAL_DCACHE_SIZE); | |
| return 0; | |
| } | |
| /* | |
| * We show only CPU #0 info. | |
| */ | |
| static void * | |
| c_start(struct seq_file *f, loff_t *pos) | |
| { | |
| return (*pos == 0) ? (void *)1 : NULL; | |
| } | |
| static void * | |
| c_next(struct seq_file *f, void *v, loff_t *pos) | |
| { | |
| return NULL; | |
| } | |
| static void | |
| c_stop(struct seq_file *f, void *v) | |
| { | |
| } | |
| const struct seq_operations cpuinfo_op = | |
| { | |
| .start = c_start, | |
| .next = c_next, | |
| .stop = c_stop, | |
| .show = c_show, | |
| }; | |
| #endif /* CONFIG_PROC_FS */ |