| /****************************************************************************** | |
| * | |
| * Module Name: evxfregn - External Interfaces, ACPI Operation Regions and | |
| * Address Spaces. | |
| * | |
| *****************************************************************************/ | |
| /* | |
| * Copyright (C) 2000 - 2016, Intel Corp. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer | |
| * substantially similar to the "NO WARRANTY" disclaimer below | |
| * ("Disclaimer") and any redistribution must be conditioned upon | |
| * including a substantially similar Disclaimer requirement for further | |
| * binary redistribution. | |
| * 3. Neither the names of the above-listed copyright holders nor the names | |
| * of any contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2 as published by the Free | |
| * Software Foundation. | |
| * | |
| * NO WARRANTY | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGES. | |
| */ | |
| #define EXPORT_ACPI_INTERFACES | |
| #include <acpi/acpi.h> | |
| #include "accommon.h" | |
| #include "acnamesp.h" | |
| #include "acevents.h" | |
| #define _COMPONENT ACPI_EVENTS | |
| ACPI_MODULE_NAME("evxfregn") | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_install_address_space_handler | |
| * | |
| * PARAMETERS: device - Handle for the device | |
| * space_id - The address space ID | |
| * handler - Address of the handler | |
| * setup - Address of the setup function | |
| * context - Value passed to the handler on each access | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Install a handler for all op_regions of a given space_id. | |
| * | |
| * NOTE: This function should only be called after acpi_enable_subsystem has | |
| * been called. This is because any _REG methods associated with the Space ID | |
| * are executed here, and these methods can only be safely executed after | |
| * the default handlers have been installed and the hardware has been | |
| * initialized (via acpi_enable_subsystem.) | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_install_address_space_handler(acpi_handle device, | |
| acpi_adr_space_type space_id, | |
| acpi_adr_space_handler handler, | |
| acpi_adr_space_setup setup, void *context) | |
| { | |
| struct acpi_namespace_node *node; | |
| acpi_status status; | |
| ACPI_FUNCTION_TRACE(acpi_install_address_space_handler); | |
| /* Parameter validation */ | |
| if (!device) { | |
| return_ACPI_STATUS(AE_BAD_PARAMETER); | |
| } | |
| status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); | |
| if (ACPI_FAILURE(status)) { | |
| return_ACPI_STATUS(status); | |
| } | |
| /* Convert and validate the device handle */ | |
| node = acpi_ns_validate_handle(device); | |
| if (!node) { | |
| status = AE_BAD_PARAMETER; | |
| goto unlock_and_exit; | |
| } | |
| /* Install the handler for all Regions for this Space ID */ | |
| status = | |
| acpi_ev_install_space_handler(node, space_id, handler, setup, | |
| context); | |
| if (ACPI_FAILURE(status)) { | |
| goto unlock_and_exit; | |
| } | |
| /* Run all _REG methods for this address space */ | |
| acpi_ev_execute_reg_methods(node, space_id, ACPI_REG_CONNECT); | |
| unlock_and_exit: | |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); | |
| return_ACPI_STATUS(status); | |
| } | |
| ACPI_EXPORT_SYMBOL(acpi_install_address_space_handler) | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_remove_address_space_handler | |
| * | |
| * PARAMETERS: device - Handle for the device | |
| * space_id - The address space ID | |
| * handler - Address of the handler | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Remove a previously installed handler. | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_remove_address_space_handler(acpi_handle device, | |
| acpi_adr_space_type space_id, | |
| acpi_adr_space_handler handler) | |
| { | |
| union acpi_operand_object *obj_desc; | |
| union acpi_operand_object *handler_obj; | |
| union acpi_operand_object *region_obj; | |
| union acpi_operand_object **last_obj_ptr; | |
| struct acpi_namespace_node *node; | |
| acpi_status status; | |
| ACPI_FUNCTION_TRACE(acpi_remove_address_space_handler); | |
| /* Parameter validation */ | |
| if (!device) { | |
| return_ACPI_STATUS(AE_BAD_PARAMETER); | |
| } | |
| status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); | |
| if (ACPI_FAILURE(status)) { | |
| return_ACPI_STATUS(status); | |
| } | |
| /* Convert and validate the device handle */ | |
| node = acpi_ns_validate_handle(device); | |
| if (!node || | |
| ((node->type != ACPI_TYPE_DEVICE) && | |
| (node->type != ACPI_TYPE_PROCESSOR) && | |
| (node->type != ACPI_TYPE_THERMAL) && | |
| (node != acpi_gbl_root_node))) { | |
| status = AE_BAD_PARAMETER; | |
| goto unlock_and_exit; | |
| } | |
| /* Make sure the internal object exists */ | |
| obj_desc = acpi_ns_get_attached_object(node); | |
| if (!obj_desc) { | |
| status = AE_NOT_EXIST; | |
| goto unlock_and_exit; | |
| } | |
| /* Find the address handler the user requested */ | |
| handler_obj = obj_desc->common_notify.handler; | |
| last_obj_ptr = &obj_desc->common_notify.handler; | |
| while (handler_obj) { | |
| /* We have a handler, see if user requested this one */ | |
| if (handler_obj->address_space.space_id == space_id) { | |
| /* Handler must be the same as the installed handler */ | |
| if (handler_obj->address_space.handler != handler) { | |
| status = AE_BAD_PARAMETER; | |
| goto unlock_and_exit; | |
| } | |
| /* Matched space_id, first dereference this in the Regions */ | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "Removing address handler %p(%p) for region %s " | |
| "on Device %p(%p)\n", | |
| handler_obj, handler, | |
| acpi_ut_get_region_name(space_id), | |
| node, obj_desc)); | |
| region_obj = handler_obj->address_space.region_list; | |
| /* Walk the handler's region list */ | |
| while (region_obj) { | |
| /* | |
| * First disassociate the handler from the region. | |
| * | |
| * NOTE: this doesn't mean that the region goes away | |
| * The region is just inaccessible as indicated to | |
| * the _REG method | |
| */ | |
| acpi_ev_detach_region(region_obj, TRUE); | |
| /* | |
| * Walk the list: Just grab the head because the | |
| * detach_region removed the previous head. | |
| */ | |
| region_obj = | |
| handler_obj->address_space.region_list; | |
| } | |
| /* Remove this Handler object from the list */ | |
| *last_obj_ptr = handler_obj->address_space.next; | |
| /* Now we can delete the handler object */ | |
| acpi_ut_remove_reference(handler_obj); | |
| goto unlock_and_exit; | |
| } | |
| /* Walk the linked list of handlers */ | |
| last_obj_ptr = &handler_obj->address_space.next; | |
| handler_obj = handler_obj->address_space.next; | |
| } | |
| /* The handler does not exist */ | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "Unable to remove address handler %p for %s(%X), DevNode %p, obj %p\n", | |
| handler, acpi_ut_get_region_name(space_id), space_id, | |
| node, obj_desc)); | |
| status = AE_NOT_EXIST; | |
| unlock_and_exit: | |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); | |
| return_ACPI_STATUS(status); | |
| } | |
| ACPI_EXPORT_SYMBOL(acpi_remove_address_space_handler) |