| /****************************************************************************** | |
| * | |
| * Module Name: exdebug - Support for stores to the AML Debug Object | |
| * | |
| *****************************************************************************/ | |
| /* | |
| * Copyright (C) 2000 - 2016, Intel Corp. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer | |
| * substantially similar to the "NO WARRANTY" disclaimer below | |
| * ("Disclaimer") and any redistribution must be conditioned upon | |
| * including a substantially similar Disclaimer requirement for further | |
| * binary redistribution. | |
| * 3. Neither the names of the above-listed copyright holders nor the names | |
| * of any contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2 as published by the Free | |
| * Software Foundation. | |
| * | |
| * NO WARRANTY | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGES. | |
| */ | |
| #include <acpi/acpi.h> | |
| #include "accommon.h" | |
| #include "acinterp.h" | |
| #define _COMPONENT ACPI_EXECUTER | |
| ACPI_MODULE_NAME("exdebug") | |
| #ifndef ACPI_NO_ERROR_MESSAGES | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ex_do_debug_object | |
| * | |
| * PARAMETERS: source_desc - Object to be output to "Debug Object" | |
| * level - Indentation level (used for packages) | |
| * index - Current package element, zero if not pkg | |
| * | |
| * RETURN: None | |
| * | |
| * DESCRIPTION: Handles stores to the AML Debug Object. For example: | |
| * Store(INT1, Debug) | |
| * | |
| * This function is not compiled if ACPI_NO_ERROR_MESSAGES is set. | |
| * | |
| * This function is only enabled if acpi_gbl_enable_aml_debug_object is set, or | |
| * if ACPI_LV_DEBUG_OBJECT is set in the acpi_dbg_level. Thus, in the normal | |
| * operational case, stores to the debug object are ignored but can be easily | |
| * enabled if necessary. | |
| * | |
| ******************************************************************************/ | |
| void | |
| acpi_ex_do_debug_object(union acpi_operand_object *source_desc, | |
| u32 level, u32 index) | |
| { | |
| u32 i; | |
| u32 timer; | |
| union acpi_operand_object *object_desc; | |
| u32 value; | |
| ACPI_FUNCTION_TRACE_PTR(ex_do_debug_object, source_desc); | |
| /* Output must be enabled via the debug_object global or the dbg_level */ | |
| if (!acpi_gbl_enable_aml_debug_object && | |
| !(acpi_dbg_level & ACPI_LV_DEBUG_OBJECT)) { | |
| return_VOID; | |
| } | |
| /* Null string or newline -- don't emit the line header */ | |
| if (source_desc && | |
| (ACPI_GET_DESCRIPTOR_TYPE(source_desc) == ACPI_DESC_TYPE_OPERAND) && | |
| (source_desc->common.type == ACPI_TYPE_STRING)) { | |
| if ((source_desc->string.length == 0) || | |
| ((source_desc->string.length == 1) && | |
| (*source_desc->string.pointer == '\n'))) { | |
| acpi_os_printf("\n"); | |
| return_VOID; | |
| } | |
| } | |
| /* | |
| * Print line header as long as we are not in the middle of an | |
| * object display | |
| */ | |
| if (!((level > 0) && index == 0)) { | |
| if (acpi_gbl_display_debug_timer) { | |
| /* | |
| * We will emit the current timer value (in microseconds) with each | |
| * debug output. Only need the lower 26 bits. This allows for 67 | |
| * million microseconds or 67 seconds before rollover. | |
| * | |
| * Convert 100 nanosecond units to microseconds | |
| */ | |
| timer = ((u32)acpi_os_get_timer() / 10); | |
| timer &= 0x03FFFFFF; | |
| acpi_os_printf("[ACPI Debug T=0x%8.8X] %*s", timer, | |
| level, " "); | |
| } else { | |
| acpi_os_printf("[ACPI Debug] %*s", level, " "); | |
| } | |
| } | |
| /* Display the index for package output only */ | |
| if (index > 0) { | |
| acpi_os_printf("(%.2u) ", index - 1); | |
| } | |
| if (!source_desc) { | |
| acpi_os_printf("[Null Object]\n"); | |
| return_VOID; | |
| } | |
| if (ACPI_GET_DESCRIPTOR_TYPE(source_desc) == ACPI_DESC_TYPE_OPERAND) { | |
| /* No object type prefix needed for integers and strings */ | |
| if ((source_desc->common.type != ACPI_TYPE_INTEGER) && | |
| (source_desc->common.type != ACPI_TYPE_STRING)) { | |
| acpi_os_printf("%s ", | |
| acpi_ut_get_object_type_name | |
| (source_desc)); | |
| } | |
| if (!acpi_ut_valid_internal_object(source_desc)) { | |
| acpi_os_printf("%p, Invalid Internal Object!\n", | |
| source_desc); | |
| return_VOID; | |
| } | |
| } else if (ACPI_GET_DESCRIPTOR_TYPE(source_desc) == | |
| ACPI_DESC_TYPE_NAMED) { | |
| acpi_os_printf("%s (Node %p)\n", | |
| acpi_ut_get_type_name(((struct | |
| acpi_namespace_node *) | |
| source_desc)->type), | |
| source_desc); | |
| return_VOID; | |
| } else { | |
| return_VOID; | |
| } | |
| /* source_desc is of type ACPI_DESC_TYPE_OPERAND */ | |
| switch (source_desc->common.type) { | |
| case ACPI_TYPE_INTEGER: | |
| /* Output correct integer width */ | |
| if (acpi_gbl_integer_byte_width == 4) { | |
| acpi_os_printf("0x%8.8X\n", | |
| (u32)source_desc->integer.value); | |
| } else { | |
| acpi_os_printf("0x%8.8X%8.8X\n", | |
| ACPI_FORMAT_UINT64(source_desc->integer. | |
| value)); | |
| } | |
| break; | |
| case ACPI_TYPE_BUFFER: | |
| acpi_os_printf("[0x%.2X]\n", (u32)source_desc->buffer.length); | |
| acpi_ut_dump_buffer(source_desc->buffer.pointer, | |
| (source_desc->buffer.length < 256) ? | |
| source_desc->buffer.length : 256, | |
| DB_BYTE_DISPLAY, 0); | |
| break; | |
| case ACPI_TYPE_STRING: | |
| acpi_os_printf("\"%s\"\n", source_desc->string.pointer); | |
| break; | |
| case ACPI_TYPE_PACKAGE: | |
| acpi_os_printf("(Contains 0x%.2X Elements):\n", | |
| source_desc->package.count); | |
| /* Output the entire contents of the package */ | |
| for (i = 0; i < source_desc->package.count; i++) { | |
| acpi_ex_do_debug_object(source_desc->package. | |
| elements[i], level + 4, i + 1); | |
| } | |
| break; | |
| case ACPI_TYPE_LOCAL_REFERENCE: | |
| acpi_os_printf("[%s] ", | |
| acpi_ut_get_reference_name(source_desc)); | |
| /* Decode the reference */ | |
| switch (source_desc->reference.class) { | |
| case ACPI_REFCLASS_INDEX: | |
| acpi_os_printf("0x%X\n", source_desc->reference.value); | |
| break; | |
| case ACPI_REFCLASS_TABLE: | |
| /* Case for ddb_handle */ | |
| acpi_os_printf("Table Index 0x%X\n", | |
| source_desc->reference.value); | |
| return_VOID; | |
| default: | |
| break; | |
| } | |
| acpi_os_printf(" "); | |
| /* Check for valid node first, then valid object */ | |
| if (source_desc->reference.node) { | |
| if (ACPI_GET_DESCRIPTOR_TYPE | |
| (source_desc->reference.node) != | |
| ACPI_DESC_TYPE_NAMED) { | |
| acpi_os_printf | |
| (" %p - Not a valid namespace node\n", | |
| source_desc->reference.node); | |
| } else { | |
| acpi_os_printf("Node %p [%4.4s] ", | |
| source_desc->reference.node, | |
| (source_desc->reference.node)-> | |
| name.ascii); | |
| switch ((source_desc->reference.node)->type) { | |
| /* These types have no attached object */ | |
| case ACPI_TYPE_DEVICE: | |
| acpi_os_printf("Device\n"); | |
| break; | |
| case ACPI_TYPE_THERMAL: | |
| acpi_os_printf("Thermal Zone\n"); | |
| break; | |
| default: | |
| acpi_ex_do_debug_object((source_desc-> | |
| reference. | |
| node)->object, | |
| level + 4, 0); | |
| break; | |
| } | |
| } | |
| } else if (source_desc->reference.object) { | |
| if (ACPI_GET_DESCRIPTOR_TYPE | |
| (source_desc->reference.object) == | |
| ACPI_DESC_TYPE_NAMED) { | |
| /* Reference object is a namespace node */ | |
| acpi_ex_do_debug_object(ACPI_CAST_PTR | |
| (union | |
| acpi_operand_object, | |
| source_desc->reference. | |
| object), level + 4, 0); | |
| } else { | |
| object_desc = source_desc->reference.object; | |
| value = source_desc->reference.value; | |
| switch (object_desc->common.type) { | |
| case ACPI_TYPE_BUFFER: | |
| acpi_os_printf("Buffer[%u] = 0x%2.2X\n", | |
| value, | |
| *source_desc->reference. | |
| index_pointer); | |
| break; | |
| case ACPI_TYPE_STRING: | |
| acpi_os_printf | |
| ("String[%u] = \"%c\" (0x%2.2X)\n", | |
| value, | |
| *source_desc->reference. | |
| index_pointer, | |
| *source_desc->reference. | |
| index_pointer); | |
| break; | |
| case ACPI_TYPE_PACKAGE: | |
| acpi_os_printf("Package[%u] = ", value); | |
| if (!(*source_desc->reference.where)) { | |
| acpi_os_printf | |
| ("[Uninitialized Package Element]\n"); | |
| } else { | |
| acpi_ex_do_debug_object | |
| (*source_desc->reference. | |
| where, level + 4, 0); | |
| } | |
| break; | |
| default: | |
| acpi_os_printf | |
| ("Unknown Reference object type %X\n", | |
| object_desc->common.type); | |
| break; | |
| } | |
| } | |
| } | |
| break; | |
| default: | |
| acpi_os_printf("(Descriptor %p)\n", source_desc); | |
| break; | |
| } | |
| ACPI_DEBUG_PRINT_RAW((ACPI_DB_EXEC, "\n")); | |
| return_VOID; | |
| } | |
| #endif |