| /****************************************************************************** | |
| * | |
| * Module Name: tbxfload - Table load/unload external interfaces | |
| * | |
| *****************************************************************************/ | |
| /* | |
| * Copyright (C) 2000 - 2016, Intel Corp. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer | |
| * substantially similar to the "NO WARRANTY" disclaimer below | |
| * ("Disclaimer") and any redistribution must be conditioned upon | |
| * including a substantially similar Disclaimer requirement for further | |
| * binary redistribution. | |
| * 3. Neither the names of the above-listed copyright holders nor the names | |
| * of any contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2 as published by the Free | |
| * Software Foundation. | |
| * | |
| * NO WARRANTY | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGES. | |
| */ | |
| #define EXPORT_ACPI_INTERFACES | |
| #include <acpi/acpi.h> | |
| #include "accommon.h" | |
| #include "acnamesp.h" | |
| #include "actables.h" | |
| #include "acevents.h" | |
| #define _COMPONENT ACPI_TABLES | |
| ACPI_MODULE_NAME("tbxfload") | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_load_tables | |
| * | |
| * PARAMETERS: None | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT | |
| * | |
| ******************************************************************************/ | |
| acpi_status ACPI_INIT_FUNCTION acpi_load_tables(void) | |
| { | |
| acpi_status status; | |
| ACPI_FUNCTION_TRACE(acpi_load_tables); | |
| /* | |
| * Install the default operation region handlers. These are the | |
| * handlers that are defined by the ACPI specification to be | |
| * "always accessible" -- namely, system_memory, system_IO, and | |
| * PCI_Config. This also means that no _REG methods need to be | |
| * run for these address spaces. We need to have these handlers | |
| * installed before any AML code can be executed, especially any | |
| * module-level code (11/2015). | |
| * Note that we allow OSPMs to install their own region handlers | |
| * between acpi_initialize_subsystem() and acpi_load_tables() to use | |
| * their customized default region handlers. | |
| */ | |
| status = acpi_ev_install_region_handlers(); | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_EXCEPTION((AE_INFO, status, | |
| "During Region initialization")); | |
| return_ACPI_STATUS(status); | |
| } | |
| /* Load the namespace from the tables */ | |
| status = acpi_tb_load_namespace(); | |
| /* Don't let single failures abort the load */ | |
| if (status == AE_CTRL_TERMINATE) { | |
| status = AE_OK; | |
| } | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_EXCEPTION((AE_INFO, status, | |
| "While loading namespace from ACPI tables")); | |
| } | |
| if (acpi_gbl_parse_table_as_term_list | |
| || !acpi_gbl_group_module_level_code) { | |
| /* | |
| * Initialize the objects that remain uninitialized. This | |
| * runs the executable AML that may be part of the | |
| * declaration of these objects: | |
| * operation_regions, buffer_fields, Buffers, and Packages. | |
| */ | |
| status = acpi_ns_initialize_objects(); | |
| if (ACPI_FAILURE(status)) { | |
| return_ACPI_STATUS(status); | |
| } | |
| } | |
| acpi_gbl_namespace_initialized = TRUE; | |
| return_ACPI_STATUS(status); | |
| } | |
| ACPI_EXPORT_SYMBOL_INIT(acpi_load_tables) | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_tb_load_namespace | |
| * | |
| * PARAMETERS: None | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in | |
| * the RSDT/XSDT. | |
| * | |
| ******************************************************************************/ | |
| acpi_status acpi_tb_load_namespace(void) | |
| { | |
| acpi_status status; | |
| u32 i; | |
| struct acpi_table_header *new_dsdt; | |
| struct acpi_table_desc *table; | |
| u32 tables_loaded = 0; | |
| u32 tables_failed = 0; | |
| ACPI_FUNCTION_TRACE(tb_load_namespace); | |
| (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | |
| /* | |
| * Load the namespace. The DSDT is required, but any SSDT and | |
| * PSDT tables are optional. Verify the DSDT. | |
| */ | |
| table = &acpi_gbl_root_table_list.tables[acpi_gbl_dsdt_index]; | |
| if (!acpi_gbl_root_table_list.current_table_count || | |
| !ACPI_COMPARE_NAME(table->signature.ascii, ACPI_SIG_DSDT) || | |
| ACPI_FAILURE(acpi_tb_validate_table(table))) { | |
| status = AE_NO_ACPI_TABLES; | |
| goto unlock_and_exit; | |
| } | |
| /* | |
| * Save the DSDT pointer for simple access. This is the mapped memory | |
| * address. We must take care here because the address of the .Tables | |
| * array can change dynamically as tables are loaded at run-time. Note: | |
| * .Pointer field is not validated until after call to acpi_tb_validate_table. | |
| */ | |
| acpi_gbl_DSDT = table->pointer; | |
| /* | |
| * Optionally copy the entire DSDT to local memory (instead of simply | |
| * mapping it.) There are some BIOSs that corrupt or replace the original | |
| * DSDT, creating the need for this option. Default is FALSE, do not copy | |
| * the DSDT. | |
| */ | |
| if (acpi_gbl_copy_dsdt_locally) { | |
| new_dsdt = acpi_tb_copy_dsdt(acpi_gbl_dsdt_index); | |
| if (new_dsdt) { | |
| acpi_gbl_DSDT = new_dsdt; | |
| } | |
| } | |
| /* | |
| * Save the original DSDT header for detection of table corruption | |
| * and/or replacement of the DSDT from outside the OS. | |
| */ | |
| memcpy(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT, | |
| sizeof(struct acpi_table_header)); | |
| /* Load and parse tables */ | |
| (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); | |
| status = acpi_ns_load_table(acpi_gbl_dsdt_index, acpi_gbl_root_node); | |
| (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_EXCEPTION((AE_INFO, status, "[DSDT] table load failed")); | |
| tables_failed++; | |
| } else { | |
| tables_loaded++; | |
| } | |
| /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */ | |
| for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) { | |
| table = &acpi_gbl_root_table_list.tables[i]; | |
| if (!acpi_gbl_root_table_list.tables[i].address || | |
| (!ACPI_COMPARE_NAME(table->signature.ascii, ACPI_SIG_SSDT) | |
| && !ACPI_COMPARE_NAME(table->signature.ascii, | |
| ACPI_SIG_PSDT) | |
| && !ACPI_COMPARE_NAME(table->signature.ascii, | |
| ACPI_SIG_OSDT)) | |
| || ACPI_FAILURE(acpi_tb_validate_table(table))) { | |
| continue; | |
| } | |
| /* Ignore errors while loading tables, get as many as possible */ | |
| (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); | |
| status = acpi_ns_load_table(i, acpi_gbl_root_node); | |
| (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_EXCEPTION((AE_INFO, status, | |
| "(%4.4s:%8.8s) while loading table", | |
| table->signature.ascii, | |
| table->pointer->oem_table_id)); | |
| tables_failed++; | |
| ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, | |
| "Table [%4.4s:%8.8s] (id FF) - Table namespace load failed\n\n", | |
| table->signature.ascii, | |
| table->pointer->oem_table_id)); | |
| } else { | |
| tables_loaded++; | |
| } | |
| } | |
| if (!tables_failed) { | |
| ACPI_INFO(("%u ACPI AML tables successfully acquired and loaded\n", tables_loaded)); | |
| } else { | |
| ACPI_ERROR((AE_INFO, | |
| "%u table load failures, %u successful", | |
| tables_failed, tables_loaded)); | |
| /* Indicate at least one failure */ | |
| status = AE_CTRL_TERMINATE; | |
| } | |
| unlock_and_exit: | |
| (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); | |
| return_ACPI_STATUS(status); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_install_table | |
| * | |
| * PARAMETERS: address - Address of the ACPI table to be installed. | |
| * physical - Whether the address is a physical table | |
| * address or not | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Dynamically install an ACPI table. | |
| * Note: This function should only be invoked after | |
| * acpi_initialize_tables() and before acpi_load_tables(). | |
| * | |
| ******************************************************************************/ | |
| acpi_status ACPI_INIT_FUNCTION | |
| acpi_install_table(acpi_physical_address address, u8 physical) | |
| { | |
| acpi_status status; | |
| u8 flags; | |
| u32 table_index; | |
| ACPI_FUNCTION_TRACE(acpi_install_table); | |
| if (physical) { | |
| flags = ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL; | |
| } else { | |
| flags = ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL; | |
| } | |
| status = acpi_tb_install_standard_table(address, flags, | |
| FALSE, FALSE, &table_index); | |
| return_ACPI_STATUS(status); | |
| } | |
| ACPI_EXPORT_SYMBOL_INIT(acpi_install_table) | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_load_table | |
| * | |
| * PARAMETERS: table - Pointer to a buffer containing the ACPI | |
| * table to be loaded. | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must | |
| * be a valid ACPI table with a valid ACPI table header. | |
| * Note1: Mainly intended to support hotplug addition of SSDTs. | |
| * Note2: Does not copy the incoming table. User is responsible | |
| * to ensure that the table is not deleted or unmapped. | |
| * | |
| ******************************************************************************/ | |
| acpi_status acpi_load_table(struct acpi_table_header *table) | |
| { | |
| acpi_status status; | |
| u32 table_index; | |
| ACPI_FUNCTION_TRACE(acpi_load_table); | |
| /* Parameter validation */ | |
| if (!table) { | |
| return_ACPI_STATUS(AE_BAD_PARAMETER); | |
| } | |
| /* Install the table and load it into the namespace */ | |
| ACPI_INFO(("Host-directed Dynamic ACPI Table Load:")); | |
| status = | |
| acpi_tb_install_and_load_table(table, ACPI_PTR_TO_PHYSADDR(table), | |
| ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL, | |
| FALSE, &table_index); | |
| return_ACPI_STATUS(status); | |
| } | |
| ACPI_EXPORT_SYMBOL(acpi_load_table) | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_unload_parent_table | |
| * | |
| * PARAMETERS: object - Handle to any namespace object owned by | |
| * the table to be unloaded | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Via any namespace object within an SSDT or OEMx table, unloads | |
| * the table and deletes all namespace objects associated with | |
| * that table. Unloading of the DSDT is not allowed. | |
| * Note: Mainly intended to support hotplug removal of SSDTs. | |
| * | |
| ******************************************************************************/ | |
| acpi_status acpi_unload_parent_table(acpi_handle object) | |
| { | |
| struct acpi_namespace_node *node = | |
| ACPI_CAST_PTR(struct acpi_namespace_node, object); | |
| acpi_status status = AE_NOT_EXIST; | |
| acpi_owner_id owner_id; | |
| u32 i; | |
| ACPI_FUNCTION_TRACE(acpi_unload_parent_table); | |
| /* Parameter validation */ | |
| if (!object) { | |
| return_ACPI_STATUS(AE_BAD_PARAMETER); | |
| } | |
| /* | |
| * The node owner_id is currently the same as the parent table ID. | |
| * However, this could change in the future. | |
| */ | |
| owner_id = node->owner_id; | |
| if (!owner_id) { | |
| /* owner_id==0 means DSDT is the owner. DSDT cannot be unloaded */ | |
| return_ACPI_STATUS(AE_TYPE); | |
| } | |
| /* Must acquire the table lock during this operation */ | |
| status = acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | |
| if (ACPI_FAILURE(status)) { | |
| return_ACPI_STATUS(status); | |
| } | |
| /* Find the table in the global table list */ | |
| for (i = 0; i < acpi_gbl_root_table_list.current_table_count; i++) { | |
| if (owner_id != acpi_gbl_root_table_list.tables[i].owner_id) { | |
| continue; | |
| } | |
| /* | |
| * Allow unload of SSDT and OEMx tables only. Do not allow unload | |
| * of the DSDT. No other types of tables should get here, since | |
| * only these types can contain AML and thus are the only types | |
| * that can create namespace objects. | |
| */ | |
| if (ACPI_COMPARE_NAME | |
| (acpi_gbl_root_table_list.tables[i].signature.ascii, | |
| ACPI_SIG_DSDT)) { | |
| status = AE_TYPE; | |
| break; | |
| } | |
| /* Ensure the table is actually loaded */ | |
| (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); | |
| if (!acpi_tb_is_table_loaded(i)) { | |
| status = AE_NOT_EXIST; | |
| (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | |
| break; | |
| } | |
| /* Invoke table handler if present */ | |
| if (acpi_gbl_table_handler) { | |
| (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_UNLOAD, | |
| acpi_gbl_root_table_list. | |
| tables[i].pointer, | |
| acpi_gbl_table_handler_context); | |
| } | |
| /* | |
| * Delete all namespace objects owned by this table. Note that | |
| * these objects can appear anywhere in the namespace by virtue | |
| * of the AML "Scope" operator. Thus, we need to track ownership | |
| * by an ID, not simply a position within the hierarchy. | |
| */ | |
| status = acpi_tb_delete_namespace_by_owner(i); | |
| if (ACPI_FAILURE(status)) { | |
| break; | |
| } | |
| status = acpi_tb_release_owner_id(i); | |
| acpi_tb_set_table_loaded_flag(i, FALSE); | |
| (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | |
| break; | |
| } | |
| (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); | |
| return_ACPI_STATUS(status); | |
| } | |
| ACPI_EXPORT_SYMBOL(acpi_unload_parent_table) |