| /* | |
| * acpi_bus.c - ACPI Bus Driver ($Revision: 80 $) | |
| * | |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or (at | |
| * your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/sched.h> | |
| #include <linux/pm.h> | |
| #include <linux/device.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/acpi.h> | |
| #include <linux/slab.h> | |
| #include <linux/regulator/machine.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/reboot.h> | |
| #include <linux/delay.h> | |
| #ifdef CONFIG_X86 | |
| #include <asm/mpspec.h> | |
| #endif | |
| #include <linux/acpi_iort.h> | |
| #include <linux/pci.h> | |
| #include <acpi/apei.h> | |
| #include <linux/dmi.h> | |
| #include <linux/suspend.h> | |
| #include "internal.h" | |
| #define _COMPONENT ACPI_BUS_COMPONENT | |
| ACPI_MODULE_NAME("bus"); | |
| struct acpi_device *acpi_root; | |
| struct proc_dir_entry *acpi_root_dir; | |
| EXPORT_SYMBOL(acpi_root_dir); | |
| #ifdef CONFIG_X86 | |
| #ifdef CONFIG_ACPI_CUSTOM_DSDT | |
| static inline int set_copy_dsdt(const struct dmi_system_id *id) | |
| { | |
| return 0; | |
| } | |
| #else | |
| static int set_copy_dsdt(const struct dmi_system_id *id) | |
| { | |
| printk(KERN_NOTICE "%s detected - " | |
| "force copy of DSDT to local memory\n", id->ident); | |
| acpi_gbl_copy_dsdt_locally = 1; | |
| return 0; | |
| } | |
| #endif | |
| static struct dmi_system_id dsdt_dmi_table[] __initdata = { | |
| /* | |
| * Invoke DSDT corruption work-around on all Toshiba Satellite. | |
| * https://bugzilla.kernel.org/show_bug.cgi?id=14679 | |
| */ | |
| { | |
| .callback = set_copy_dsdt, | |
| .ident = "TOSHIBA Satellite", | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"), | |
| }, | |
| }, | |
| {} | |
| }; | |
| #else | |
| static struct dmi_system_id dsdt_dmi_table[] __initdata = { | |
| {} | |
| }; | |
| #endif | |
| /* -------------------------------------------------------------------------- | |
| Device Management | |
| -------------------------------------------------------------------------- */ | |
| acpi_status acpi_bus_get_status_handle(acpi_handle handle, | |
| unsigned long long *sta) | |
| { | |
| acpi_status status; | |
| status = acpi_evaluate_integer(handle, "_STA", NULL, sta); | |
| if (ACPI_SUCCESS(status)) | |
| return AE_OK; | |
| if (status == AE_NOT_FOUND) { | |
| *sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | | |
| ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING; | |
| return AE_OK; | |
| } | |
| return status; | |
| } | |
| int acpi_bus_get_status(struct acpi_device *device) | |
| { | |
| acpi_status status; | |
| unsigned long long sta; | |
| status = acpi_bus_get_status_handle(device->handle, &sta); | |
| if (ACPI_FAILURE(status)) | |
| return -ENODEV; | |
| acpi_set_device_status(device, sta); | |
| if (device->status.functional && !device->status.present) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: " | |
| "functional but not present;\n", | |
| device->pnp.bus_id, (u32)sta)); | |
| } | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n", | |
| device->pnp.bus_id, (u32)sta)); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(acpi_bus_get_status); | |
| void acpi_bus_private_data_handler(acpi_handle handle, | |
| void *context) | |
| { | |
| return; | |
| } | |
| EXPORT_SYMBOL(acpi_bus_private_data_handler); | |
| int acpi_bus_attach_private_data(acpi_handle handle, void *data) | |
| { | |
| acpi_status status; | |
| status = acpi_attach_data(handle, | |
| acpi_bus_private_data_handler, data); | |
| if (ACPI_FAILURE(status)) { | |
| acpi_handle_debug(handle, "Error attaching device data\n"); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(acpi_bus_attach_private_data); | |
| int acpi_bus_get_private_data(acpi_handle handle, void **data) | |
| { | |
| acpi_status status; | |
| if (!*data) | |
| return -EINVAL; | |
| status = acpi_get_data(handle, acpi_bus_private_data_handler, data); | |
| if (ACPI_FAILURE(status)) { | |
| acpi_handle_debug(handle, "No context for object\n"); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(acpi_bus_get_private_data); | |
| void acpi_bus_detach_private_data(acpi_handle handle) | |
| { | |
| acpi_detach_data(handle, acpi_bus_private_data_handler); | |
| } | |
| EXPORT_SYMBOL_GPL(acpi_bus_detach_private_data); | |
| static void acpi_print_osc_error(acpi_handle handle, | |
| struct acpi_osc_context *context, char *error) | |
| { | |
| int i; | |
| acpi_handle_debug(handle, "(%s): %s\n", context->uuid_str, error); | |
| pr_debug("_OSC request data:"); | |
| for (i = 0; i < context->cap.length; i += sizeof(u32)) | |
| pr_debug(" %x", *((u32 *)(context->cap.pointer + i))); | |
| pr_debug("\n"); | |
| } | |
| acpi_status acpi_str_to_uuid(char *str, u8 *uuid) | |
| { | |
| int i; | |
| static int opc_map_to_uuid[16] = {6, 4, 2, 0, 11, 9, 16, 14, 19, 21, | |
| 24, 26, 28, 30, 32, 34}; | |
| if (strlen(str) != 36) | |
| return AE_BAD_PARAMETER; | |
| for (i = 0; i < 36; i++) { | |
| if (i == 8 || i == 13 || i == 18 || i == 23) { | |
| if (str[i] != '-') | |
| return AE_BAD_PARAMETER; | |
| } else if (!isxdigit(str[i])) | |
| return AE_BAD_PARAMETER; | |
| } | |
| for (i = 0; i < 16; i++) { | |
| uuid[i] = hex_to_bin(str[opc_map_to_uuid[i]]) << 4; | |
| uuid[i] |= hex_to_bin(str[opc_map_to_uuid[i] + 1]); | |
| } | |
| return AE_OK; | |
| } | |
| EXPORT_SYMBOL_GPL(acpi_str_to_uuid); | |
| acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context) | |
| { | |
| acpi_status status; | |
| struct acpi_object_list input; | |
| union acpi_object in_params[4]; | |
| union acpi_object *out_obj; | |
| u8 uuid[16]; | |
| u32 errors; | |
| struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; | |
| if (!context) | |
| return AE_ERROR; | |
| if (ACPI_FAILURE(acpi_str_to_uuid(context->uuid_str, uuid))) | |
| return AE_ERROR; | |
| context->ret.length = ACPI_ALLOCATE_BUFFER; | |
| context->ret.pointer = NULL; | |
| /* Setting up input parameters */ | |
| input.count = 4; | |
| input.pointer = in_params; | |
| in_params[0].type = ACPI_TYPE_BUFFER; | |
| in_params[0].buffer.length = 16; | |
| in_params[0].buffer.pointer = uuid; | |
| in_params[1].type = ACPI_TYPE_INTEGER; | |
| in_params[1].integer.value = context->rev; | |
| in_params[2].type = ACPI_TYPE_INTEGER; | |
| in_params[2].integer.value = context->cap.length/sizeof(u32); | |
| in_params[3].type = ACPI_TYPE_BUFFER; | |
| in_params[3].buffer.length = context->cap.length; | |
| in_params[3].buffer.pointer = context->cap.pointer; | |
| status = acpi_evaluate_object(handle, "_OSC", &input, &output); | |
| if (ACPI_FAILURE(status)) | |
| return status; | |
| if (!output.length) | |
| return AE_NULL_OBJECT; | |
| out_obj = output.pointer; | |
| if (out_obj->type != ACPI_TYPE_BUFFER | |
| || out_obj->buffer.length != context->cap.length) { | |
| acpi_print_osc_error(handle, context, | |
| "_OSC evaluation returned wrong type"); | |
| status = AE_TYPE; | |
| goto out_kfree; | |
| } | |
| /* Need to ignore the bit0 in result code */ | |
| errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); | |
| if (errors) { | |
| if (errors & OSC_REQUEST_ERROR) | |
| acpi_print_osc_error(handle, context, | |
| "_OSC request failed"); | |
| if (errors & OSC_INVALID_UUID_ERROR) | |
| acpi_print_osc_error(handle, context, | |
| "_OSC invalid UUID"); | |
| if (errors & OSC_INVALID_REVISION_ERROR) | |
| acpi_print_osc_error(handle, context, | |
| "_OSC invalid revision"); | |
| if (errors & OSC_CAPABILITIES_MASK_ERROR) { | |
| if (((u32 *)context->cap.pointer)[OSC_QUERY_DWORD] | |
| & OSC_QUERY_ENABLE) | |
| goto out_success; | |
| status = AE_SUPPORT; | |
| goto out_kfree; | |
| } | |
| status = AE_ERROR; | |
| goto out_kfree; | |
| } | |
| out_success: | |
| context->ret.length = out_obj->buffer.length; | |
| context->ret.pointer = kmemdup(out_obj->buffer.pointer, | |
| context->ret.length, GFP_KERNEL); | |
| if (!context->ret.pointer) { | |
| status = AE_NO_MEMORY; | |
| goto out_kfree; | |
| } | |
| status = AE_OK; | |
| out_kfree: | |
| kfree(output.pointer); | |
| if (status != AE_OK) | |
| context->ret.pointer = NULL; | |
| return status; | |
| } | |
| EXPORT_SYMBOL(acpi_run_osc); | |
| bool osc_sb_apei_support_acked; | |
| /* | |
| * ACPI 6.0 Section 8.4.4.2 Idle State Coordination | |
| * OSPM supports platform coordinated low power idle(LPI) states | |
| */ | |
| bool osc_pc_lpi_support_confirmed; | |
| EXPORT_SYMBOL_GPL(osc_pc_lpi_support_confirmed); | |
| static u8 sb_uuid_str[] = "0811B06E-4A27-44F9-8D60-3CBBC22E7B48"; | |
| static void acpi_bus_osc_support(void) | |
| { | |
| u32 capbuf[2]; | |
| struct acpi_osc_context context = { | |
| .uuid_str = sb_uuid_str, | |
| .rev = 1, | |
| .cap.length = 8, | |
| .cap.pointer = capbuf, | |
| }; | |
| acpi_handle handle; | |
| capbuf[OSC_QUERY_DWORD] = OSC_QUERY_ENABLE; | |
| capbuf[OSC_SUPPORT_DWORD] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */ | |
| if (IS_ENABLED(CONFIG_ACPI_PROCESSOR_AGGREGATOR)) | |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PAD_SUPPORT; | |
| if (IS_ENABLED(CONFIG_ACPI_PROCESSOR)) | |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PPC_OST_SUPPORT; | |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_HOTPLUG_OST_SUPPORT; | |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PCLPI_SUPPORT; | |
| if (!ghes_disable) | |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_APEI_SUPPORT; | |
| if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))) | |
| return; | |
| if (ACPI_SUCCESS(acpi_run_osc(handle, &context))) { | |
| u32 *capbuf_ret = context.ret.pointer; | |
| if (context.ret.length > OSC_SUPPORT_DWORD) { | |
| osc_sb_apei_support_acked = | |
| capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_APEI_SUPPORT; | |
| osc_pc_lpi_support_confirmed = | |
| capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_PCLPI_SUPPORT; | |
| } | |
| kfree(context.ret.pointer); | |
| } | |
| /* do we need to check other returned cap? Sounds no */ | |
| } | |
| /* -------------------------------------------------------------------------- | |
| Notification Handling | |
| -------------------------------------------------------------------------- */ | |
| /** | |
| * acpi_bus_notify | |
| * --------------- | |
| * Callback for all 'system-level' device notifications (values 0x00-0x7F). | |
| */ | |
| static void acpi_bus_notify(acpi_handle handle, u32 type, void *data) | |
| { | |
| struct acpi_device *adev; | |
| struct acpi_driver *driver; | |
| u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; | |
| bool hotplug_event = false; | |
| switch (type) { | |
| case ACPI_NOTIFY_BUS_CHECK: | |
| acpi_handle_debug(handle, "ACPI_NOTIFY_BUS_CHECK event\n"); | |
| hotplug_event = true; | |
| break; | |
| case ACPI_NOTIFY_DEVICE_CHECK: | |
| acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK event\n"); | |
| hotplug_event = true; | |
| break; | |
| case ACPI_NOTIFY_DEVICE_WAKE: | |
| acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_WAKE event\n"); | |
| break; | |
| case ACPI_NOTIFY_EJECT_REQUEST: | |
| acpi_handle_debug(handle, "ACPI_NOTIFY_EJECT_REQUEST event\n"); | |
| hotplug_event = true; | |
| break; | |
| case ACPI_NOTIFY_DEVICE_CHECK_LIGHT: | |
| acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK_LIGHT event\n"); | |
| /* TBD: Exactly what does 'light' mean? */ | |
| break; | |
| case ACPI_NOTIFY_FREQUENCY_MISMATCH: | |
| acpi_handle_err(handle, "Device cannot be configured due " | |
| "to a frequency mismatch\n"); | |
| break; | |
| case ACPI_NOTIFY_BUS_MODE_MISMATCH: | |
| acpi_handle_err(handle, "Device cannot be configured due " | |
| "to a bus mode mismatch\n"); | |
| break; | |
| case ACPI_NOTIFY_POWER_FAULT: | |
| acpi_handle_err(handle, "Device has suffered a power fault\n"); | |
| break; | |
| default: | |
| acpi_handle_debug(handle, "Unknown event type 0x%x\n", type); | |
| break; | |
| } | |
| adev = acpi_bus_get_acpi_device(handle); | |
| if (!adev) | |
| goto err; | |
| driver = adev->driver; | |
| if (driver && driver->ops.notify && | |
| (driver->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS)) | |
| driver->ops.notify(adev, type); | |
| if (hotplug_event && ACPI_SUCCESS(acpi_hotplug_schedule(adev, type))) | |
| return; | |
| acpi_bus_put_acpi_device(adev); | |
| return; | |
| err: | |
| acpi_evaluate_ost(handle, type, ost_code, NULL); | |
| } | |
| static void acpi_device_notify(acpi_handle handle, u32 event, void *data) | |
| { | |
| struct acpi_device *device = data; | |
| device->driver->ops.notify(device, event); | |
| } | |
| static void acpi_device_notify_fixed(void *data) | |
| { | |
| struct acpi_device *device = data; | |
| /* Fixed hardware devices have no handles */ | |
| acpi_device_notify(NULL, ACPI_FIXED_HARDWARE_EVENT, device); | |
| } | |
| static u32 acpi_device_fixed_event(void *data) | |
| { | |
| acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_device_notify_fixed, data); | |
| return ACPI_INTERRUPT_HANDLED; | |
| } | |
| static int acpi_device_install_notify_handler(struct acpi_device *device) | |
| { | |
| acpi_status status; | |
| if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON) | |
| status = | |
| acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON, | |
| acpi_device_fixed_event, | |
| device); | |
| else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON) | |
| status = | |
| acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON, | |
| acpi_device_fixed_event, | |
| device); | |
| else | |
| status = acpi_install_notify_handler(device->handle, | |
| ACPI_DEVICE_NOTIFY, | |
| acpi_device_notify, | |
| device); | |
| if (ACPI_FAILURE(status)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static void acpi_device_remove_notify_handler(struct acpi_device *device) | |
| { | |
| if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON) | |
| acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON, | |
| acpi_device_fixed_event); | |
| else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON) | |
| acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON, | |
| acpi_device_fixed_event); | |
| else | |
| acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, | |
| acpi_device_notify); | |
| } | |
| /* Handle events targeting \_SB device (at present only graceful shutdown) */ | |
| #define ACPI_SB_NOTIFY_SHUTDOWN_REQUEST 0x81 | |
| #define ACPI_SB_INDICATE_INTERVAL 10000 | |
| static void sb_notify_work(struct work_struct *dummy) | |
| { | |
| acpi_handle sb_handle; | |
| orderly_poweroff(true); | |
| /* | |
| * After initiating graceful shutdown, the ACPI spec requires OSPM | |
| * to evaluate _OST method once every 10seconds to indicate that | |
| * the shutdown is in progress | |
| */ | |
| acpi_get_handle(NULL, "\\_SB", &sb_handle); | |
| while (1) { | |
| pr_info("Graceful shutdown in progress.\n"); | |
| acpi_evaluate_ost(sb_handle, ACPI_OST_EC_OSPM_SHUTDOWN, | |
| ACPI_OST_SC_OS_SHUTDOWN_IN_PROGRESS, NULL); | |
| msleep(ACPI_SB_INDICATE_INTERVAL); | |
| } | |
| } | |
| static void acpi_sb_notify(acpi_handle handle, u32 event, void *data) | |
| { | |
| static DECLARE_WORK(acpi_sb_work, sb_notify_work); | |
| if (event == ACPI_SB_NOTIFY_SHUTDOWN_REQUEST) { | |
| if (!work_busy(&acpi_sb_work)) | |
| schedule_work(&acpi_sb_work); | |
| } else | |
| pr_warn("event %x is not supported by \\_SB device\n", event); | |
| } | |
| static int __init acpi_setup_sb_notify_handler(void) | |
| { | |
| acpi_handle sb_handle; | |
| if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &sb_handle))) | |
| return -ENXIO; | |
| if (ACPI_FAILURE(acpi_install_notify_handler(sb_handle, ACPI_DEVICE_NOTIFY, | |
| acpi_sb_notify, NULL))) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| /* -------------------------------------------------------------------------- | |
| Device Matching | |
| -------------------------------------------------------------------------- */ | |
| /** | |
| * acpi_get_first_physical_node - Get first physical node of an ACPI device | |
| * @adev: ACPI device in question | |
| * | |
| * Return: First physical node of ACPI device @adev | |
| */ | |
| struct device *acpi_get_first_physical_node(struct acpi_device *adev) | |
| { | |
| struct mutex *physical_node_lock = &adev->physical_node_lock; | |
| struct device *phys_dev; | |
| mutex_lock(physical_node_lock); | |
| if (list_empty(&adev->physical_node_list)) { | |
| phys_dev = NULL; | |
| } else { | |
| const struct acpi_device_physical_node *node; | |
| node = list_first_entry(&adev->physical_node_list, | |
| struct acpi_device_physical_node, node); | |
| phys_dev = node->dev; | |
| } | |
| mutex_unlock(physical_node_lock); | |
| return phys_dev; | |
| } | |
| static struct acpi_device *acpi_primary_dev_companion(struct acpi_device *adev, | |
| const struct device *dev) | |
| { | |
| const struct device *phys_dev = acpi_get_first_physical_node(adev); | |
| return phys_dev && phys_dev == dev ? adev : NULL; | |
| } | |
| /** | |
| * acpi_device_is_first_physical_node - Is given dev first physical node | |
| * @adev: ACPI companion device | |
| * @dev: Physical device to check | |
| * | |
| * Function checks if given @dev is the first physical devices attached to | |
| * the ACPI companion device. This distinction is needed in some cases | |
| * where the same companion device is shared between many physical devices. | |
| * | |
| * Note that the caller have to provide valid @adev pointer. | |
| */ | |
| bool acpi_device_is_first_physical_node(struct acpi_device *adev, | |
| const struct device *dev) | |
| { | |
| return !!acpi_primary_dev_companion(adev, dev); | |
| } | |
| /* | |
| * acpi_companion_match() - Can we match via ACPI companion device | |
| * @dev: Device in question | |
| * | |
| * Check if the given device has an ACPI companion and if that companion has | |
| * a valid list of PNP IDs, and if the device is the first (primary) physical | |
| * device associated with it. Return the companion pointer if that's the case | |
| * or NULL otherwise. | |
| * | |
| * If multiple physical devices are attached to a single ACPI companion, we need | |
| * to be careful. The usage scenario for this kind of relationship is that all | |
| * of the physical devices in question use resources provided by the ACPI | |
| * companion. A typical case is an MFD device where all the sub-devices share | |
| * the parent's ACPI companion. In such cases we can only allow the primary | |
| * (first) physical device to be matched with the help of the companion's PNP | |
| * IDs. | |
| * | |
| * Additional physical devices sharing the ACPI companion can still use | |
| * resources available from it but they will be matched normally using functions | |
| * provided by their bus types (and analogously for their modalias). | |
| */ | |
| struct acpi_device *acpi_companion_match(const struct device *dev) | |
| { | |
| struct acpi_device *adev; | |
| adev = ACPI_COMPANION(dev); | |
| if (!adev) | |
| return NULL; | |
| if (list_empty(&adev->pnp.ids)) | |
| return NULL; | |
| return acpi_primary_dev_companion(adev, dev); | |
| } | |
| /** | |
| * acpi_of_match_device - Match device object using the "compatible" property. | |
| * @adev: ACPI device object to match. | |
| * @of_match_table: List of device IDs to match against. | |
| * | |
| * If @dev has an ACPI companion which has ACPI_DT_NAMESPACE_HID in its list of | |
| * identifiers and a _DSD object with the "compatible" property, use that | |
| * property to match against the given list of identifiers. | |
| */ | |
| static bool acpi_of_match_device(struct acpi_device *adev, | |
| const struct of_device_id *of_match_table) | |
| { | |
| const union acpi_object *of_compatible, *obj; | |
| int i, nval; | |
| if (!adev) | |
| return false; | |
| of_compatible = adev->data.of_compatible; | |
| if (!of_match_table || !of_compatible) | |
| return false; | |
| if (of_compatible->type == ACPI_TYPE_PACKAGE) { | |
| nval = of_compatible->package.count; | |
| obj = of_compatible->package.elements; | |
| } else { /* Must be ACPI_TYPE_STRING. */ | |
| nval = 1; | |
| obj = of_compatible; | |
| } | |
| /* Now we can look for the driver DT compatible strings */ | |
| for (i = 0; i < nval; i++, obj++) { | |
| const struct of_device_id *id; | |
| for (id = of_match_table; id->compatible[0]; id++) | |
| if (!strcasecmp(obj->string.pointer, id->compatible)) | |
| return true; | |
| } | |
| return false; | |
| } | |
| static bool __acpi_match_device_cls(const struct acpi_device_id *id, | |
| struct acpi_hardware_id *hwid) | |
| { | |
| int i, msk, byte_shift; | |
| char buf[3]; | |
| if (!id->cls) | |
| return false; | |
| /* Apply class-code bitmask, before checking each class-code byte */ | |
| for (i = 1; i <= 3; i++) { | |
| byte_shift = 8 * (3 - i); | |
| msk = (id->cls_msk >> byte_shift) & 0xFF; | |
| if (!msk) | |
| continue; | |
| sprintf(buf, "%02x", (id->cls >> byte_shift) & msk); | |
| if (strncmp(buf, &hwid->id[(i - 1) * 2], 2)) | |
| return false; | |
| } | |
| return true; | |
| } | |
| static const struct acpi_device_id *__acpi_match_device( | |
| struct acpi_device *device, | |
| const struct acpi_device_id *ids, | |
| const struct of_device_id *of_ids) | |
| { | |
| const struct acpi_device_id *id; | |
| struct acpi_hardware_id *hwid; | |
| /* | |
| * If the device is not present, it is unnecessary to load device | |
| * driver for it. | |
| */ | |
| if (!device || !device->status.present) | |
| return NULL; | |
| list_for_each_entry(hwid, &device->pnp.ids, list) { | |
| /* First, check the ACPI/PNP IDs provided by the caller. */ | |
| for (id = ids; id->id[0] || id->cls; id++) { | |
| if (id->id[0] && !strcmp((char *) id->id, hwid->id)) | |
| return id; | |
| else if (id->cls && __acpi_match_device_cls(id, hwid)) | |
| return id; | |
| } | |
| /* | |
| * Next, check ACPI_DT_NAMESPACE_HID and try to match the | |
| * "compatible" property if found. | |
| * | |
| * The id returned by the below is not valid, but the only | |
| * caller passing non-NULL of_ids here is only interested in | |
| * whether or not the return value is NULL. | |
| */ | |
| if (!strcmp(ACPI_DT_NAMESPACE_HID, hwid->id) | |
| && acpi_of_match_device(device, of_ids)) | |
| return id; | |
| } | |
| return NULL; | |
| } | |
| /** | |
| * acpi_match_device - Match a struct device against a given list of ACPI IDs | |
| * @ids: Array of struct acpi_device_id object to match against. | |
| * @dev: The device structure to match. | |
| * | |
| * Check if @dev has a valid ACPI handle and if there is a struct acpi_device | |
| * object for that handle and use that object to match against a given list of | |
| * device IDs. | |
| * | |
| * Return a pointer to the first matching ID on success or %NULL on failure. | |
| */ | |
| const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids, | |
| const struct device *dev) | |
| { | |
| return __acpi_match_device(acpi_companion_match(dev), ids, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(acpi_match_device); | |
| int acpi_match_device_ids(struct acpi_device *device, | |
| const struct acpi_device_id *ids) | |
| { | |
| return __acpi_match_device(device, ids, NULL) ? 0 : -ENOENT; | |
| } | |
| EXPORT_SYMBOL(acpi_match_device_ids); | |
| bool acpi_driver_match_device(struct device *dev, | |
| const struct device_driver *drv) | |
| { | |
| if (!drv->acpi_match_table) | |
| return acpi_of_match_device(ACPI_COMPANION(dev), | |
| drv->of_match_table); | |
| return !!__acpi_match_device(acpi_companion_match(dev), | |
| drv->acpi_match_table, drv->of_match_table); | |
| } | |
| EXPORT_SYMBOL_GPL(acpi_driver_match_device); | |
| /* -------------------------------------------------------------------------- | |
| ACPI Driver Management | |
| -------------------------------------------------------------------------- */ | |
| /** | |
| * acpi_bus_register_driver - register a driver with the ACPI bus | |
| * @driver: driver being registered | |
| * | |
| * Registers a driver with the ACPI bus. Searches the namespace for all | |
| * devices that match the driver's criteria and binds. Returns zero for | |
| * success or a negative error status for failure. | |
| */ | |
| int acpi_bus_register_driver(struct acpi_driver *driver) | |
| { | |
| int ret; | |
| if (acpi_disabled) | |
| return -ENODEV; | |
| driver->drv.name = driver->name; | |
| driver->drv.bus = &acpi_bus_type; | |
| driver->drv.owner = driver->owner; | |
| ret = driver_register(&driver->drv); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(acpi_bus_register_driver); | |
| /** | |
| * acpi_bus_unregister_driver - unregisters a driver with the ACPI bus | |
| * @driver: driver to unregister | |
| * | |
| * Unregisters a driver with the ACPI bus. Searches the namespace for all | |
| * devices that match the driver's criteria and unbinds. | |
| */ | |
| void acpi_bus_unregister_driver(struct acpi_driver *driver) | |
| { | |
| driver_unregister(&driver->drv); | |
| } | |
| EXPORT_SYMBOL(acpi_bus_unregister_driver); | |
| /* -------------------------------------------------------------------------- | |
| ACPI Bus operations | |
| -------------------------------------------------------------------------- */ | |
| static int acpi_bus_match(struct device *dev, struct device_driver *drv) | |
| { | |
| struct acpi_device *acpi_dev = to_acpi_device(dev); | |
| struct acpi_driver *acpi_drv = to_acpi_driver(drv); | |
| return acpi_dev->flags.match_driver | |
| && !acpi_match_device_ids(acpi_dev, acpi_drv->ids); | |
| } | |
| static int acpi_device_uevent(struct device *dev, struct kobj_uevent_env *env) | |
| { | |
| return __acpi_device_uevent_modalias(to_acpi_device(dev), env); | |
| } | |
| static int acpi_device_probe(struct device *dev) | |
| { | |
| struct acpi_device *acpi_dev = to_acpi_device(dev); | |
| struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver); | |
| int ret; | |
| if (acpi_dev->handler && !acpi_is_pnp_device(acpi_dev)) | |
| return -EINVAL; | |
| if (!acpi_drv->ops.add) | |
| return -ENOSYS; | |
| ret = acpi_drv->ops.add(acpi_dev); | |
| if (ret) | |
| return ret; | |
| acpi_dev->driver = acpi_drv; | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Driver [%s] successfully bound to device [%s]\n", | |
| acpi_drv->name, acpi_dev->pnp.bus_id)); | |
| if (acpi_drv->ops.notify) { | |
| ret = acpi_device_install_notify_handler(acpi_dev); | |
| if (ret) { | |
| if (acpi_drv->ops.remove) | |
| acpi_drv->ops.remove(acpi_dev); | |
| acpi_dev->driver = NULL; | |
| acpi_dev->driver_data = NULL; | |
| return ret; | |
| } | |
| } | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found driver [%s] for device [%s]\n", | |
| acpi_drv->name, acpi_dev->pnp.bus_id)); | |
| get_device(dev); | |
| return 0; | |
| } | |
| static int acpi_device_remove(struct device * dev) | |
| { | |
| struct acpi_device *acpi_dev = to_acpi_device(dev); | |
| struct acpi_driver *acpi_drv = acpi_dev->driver; | |
| if (acpi_drv) { | |
| if (acpi_drv->ops.notify) | |
| acpi_device_remove_notify_handler(acpi_dev); | |
| if (acpi_drv->ops.remove) | |
| acpi_drv->ops.remove(acpi_dev); | |
| } | |
| acpi_dev->driver = NULL; | |
| acpi_dev->driver_data = NULL; | |
| put_device(dev); | |
| return 0; | |
| } | |
| struct bus_type acpi_bus_type = { | |
| .name = "acpi", | |
| .match = acpi_bus_match, | |
| .probe = acpi_device_probe, | |
| .remove = acpi_device_remove, | |
| .uevent = acpi_device_uevent, | |
| }; | |
| /* -------------------------------------------------------------------------- | |
| Initialization/Cleanup | |
| -------------------------------------------------------------------------- */ | |
| static int __init acpi_bus_init_irq(void) | |
| { | |
| acpi_status status; | |
| char *message = NULL; | |
| /* | |
| * Let the system know what interrupt model we are using by | |
| * evaluating the \_PIC object, if exists. | |
| */ | |
| switch (acpi_irq_model) { | |
| case ACPI_IRQ_MODEL_PIC: | |
| message = "PIC"; | |
| break; | |
| case ACPI_IRQ_MODEL_IOAPIC: | |
| message = "IOAPIC"; | |
| break; | |
| case ACPI_IRQ_MODEL_IOSAPIC: | |
| message = "IOSAPIC"; | |
| break; | |
| case ACPI_IRQ_MODEL_GIC: | |
| message = "GIC"; | |
| break; | |
| case ACPI_IRQ_MODEL_PLATFORM: | |
| message = "platform specific model"; | |
| break; | |
| default: | |
| printk(KERN_WARNING PREFIX "Unknown interrupt routing model\n"); | |
| return -ENODEV; | |
| } | |
| printk(KERN_INFO PREFIX "Using %s for interrupt routing\n", message); | |
| status = acpi_execute_simple_method(NULL, "\\_PIC", acpi_irq_model); | |
| if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { | |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PIC")); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * acpi_early_init - Initialize ACPICA and populate the ACPI namespace. | |
| * | |
| * The ACPI tables are accessible after this, but the handling of events has not | |
| * been initialized and the global lock is not available yet, so AML should not | |
| * be executed at this point. | |
| * | |
| * Doing this before switching the EFI runtime services to virtual mode allows | |
| * the EfiBootServices memory to be freed slightly earlier on boot. | |
| */ | |
| void __init acpi_early_init(void) | |
| { | |
| acpi_status status; | |
| if (acpi_disabled) | |
| return; | |
| printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); | |
| /* It's safe to verify table checksums during late stage */ | |
| acpi_gbl_verify_table_checksum = TRUE; | |
| /* enable workarounds, unless strict ACPI spec. compliance */ | |
| if (!acpi_strict) | |
| acpi_gbl_enable_interpreter_slack = TRUE; | |
| acpi_gbl_permanent_mmap = 1; | |
| /* | |
| * If the machine falls into the DMI check table, | |
| * DSDT will be copied to memory | |
| */ | |
| dmi_check_system(dsdt_dmi_table); | |
| status = acpi_reallocate_root_table(); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX | |
| "Unable to reallocate ACPI tables\n"); | |
| goto error0; | |
| } | |
| status = acpi_initialize_subsystem(); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX | |
| "Unable to initialize the ACPI Interpreter\n"); | |
| goto error0; | |
| } | |
| if (!acpi_gbl_parse_table_as_term_list && | |
| acpi_gbl_group_module_level_code) { | |
| status = acpi_load_tables(); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX | |
| "Unable to load the System Description Tables\n"); | |
| goto error0; | |
| } | |
| } | |
| #ifdef CONFIG_X86 | |
| if (!acpi_ioapic) { | |
| /* compatible (0) means level (3) */ | |
| if (!(acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)) { | |
| acpi_sci_flags &= ~ACPI_MADT_TRIGGER_MASK; | |
| acpi_sci_flags |= ACPI_MADT_TRIGGER_LEVEL; | |
| } | |
| /* Set PIC-mode SCI trigger type */ | |
| acpi_pic_sci_set_trigger(acpi_gbl_FADT.sci_interrupt, | |
| (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2); | |
| } else { | |
| /* | |
| * now that acpi_gbl_FADT is initialized, | |
| * update it with result from INT_SRC_OVR parsing | |
| */ | |
| acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi; | |
| } | |
| #endif | |
| return; | |
| error0: | |
| disable_acpi(); | |
| } | |
| /** | |
| * acpi_subsystem_init - Finalize the early initialization of ACPI. | |
| * | |
| * Switch over the platform to the ACPI mode (if possible). | |
| * | |
| * Doing this too early is generally unsafe, but at the same time it needs to be | |
| * done before all things that really depend on ACPI. The right spot appears to | |
| * be before finalizing the EFI initialization. | |
| */ | |
| void __init acpi_subsystem_init(void) | |
| { | |
| acpi_status status; | |
| if (acpi_disabled) | |
| return; | |
| status = acpi_enable_subsystem(~ACPI_NO_ACPI_ENABLE); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX "Unable to enable ACPI\n"); | |
| disable_acpi(); | |
| } else { | |
| /* | |
| * If the system is using ACPI then we can be reasonably | |
| * confident that any regulators are managed by the firmware | |
| * so tell the regulator core it has everything it needs to | |
| * know. | |
| */ | |
| regulator_has_full_constraints(); | |
| } | |
| } | |
| static acpi_status acpi_bus_table_handler(u32 event, void *table, void *context) | |
| { | |
| acpi_scan_table_handler(event, table, context); | |
| return acpi_sysfs_table_handler(event, table, context); | |
| } | |
| static int __init acpi_bus_init(void) | |
| { | |
| int result; | |
| acpi_status status; | |
| acpi_os_initialize1(); | |
| /* | |
| * ACPI 2.0 requires the EC driver to be loaded and work before | |
| * the EC device is found in the namespace (i.e. before | |
| * acpi_load_tables() is called). | |
| * | |
| * This is accomplished by looking for the ECDT table, and getting | |
| * the EC parameters out of that. | |
| */ | |
| status = acpi_ec_ecdt_probe(); | |
| /* Ignore result. Not having an ECDT is not fatal. */ | |
| if (acpi_gbl_parse_table_as_term_list || | |
| !acpi_gbl_group_module_level_code) { | |
| status = acpi_load_tables(); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX | |
| "Unable to load the System Description Tables\n"); | |
| goto error1; | |
| } | |
| } | |
| status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX | |
| "Unable to start the ACPI Interpreter\n"); | |
| goto error1; | |
| } | |
| status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX "Unable to initialize ACPI objects\n"); | |
| goto error1; | |
| } | |
| /* Set capability bits for _OSC under processor scope */ | |
| acpi_early_processor_osc(); | |
| /* | |
| * _OSC method may exist in module level code, | |
| * so it must be run after ACPI_FULL_INITIALIZATION | |
| */ | |
| acpi_bus_osc_support(); | |
| /* | |
| * _PDC control method may load dynamic SSDT tables, | |
| * and we need to install the table handler before that. | |
| */ | |
| status = acpi_install_table_handler(acpi_bus_table_handler, NULL); | |
| acpi_sysfs_init(); | |
| acpi_early_processor_set_pdc(); | |
| /* | |
| * Maybe EC region is required at bus_scan/acpi_get_devices. So it | |
| * is necessary to enable it as early as possible. | |
| */ | |
| acpi_ec_dsdt_probe(); | |
| printk(KERN_INFO PREFIX "Interpreter enabled\n"); | |
| /* Initialize sleep structures */ | |
| acpi_sleep_init(); | |
| /* | |
| * Get the system interrupt model and evaluate \_PIC. | |
| */ | |
| result = acpi_bus_init_irq(); | |
| if (result) | |
| goto error1; | |
| /* | |
| * Register the for all standard device notifications. | |
| */ | |
| status = | |
| acpi_install_notify_handler(ACPI_ROOT_OBJECT, ACPI_SYSTEM_NOTIFY, | |
| &acpi_bus_notify, NULL); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX | |
| "Unable to register for device notifications\n"); | |
| goto error1; | |
| } | |
| /* | |
| * Create the top ACPI proc directory | |
| */ | |
| acpi_root_dir = proc_mkdir(ACPI_BUS_FILE_ROOT, NULL); | |
| result = bus_register(&acpi_bus_type); | |
| if (!result) | |
| return 0; | |
| /* Mimic structured exception handling */ | |
| error1: | |
| acpi_terminate(); | |
| return -ENODEV; | |
| } | |
| struct kobject *acpi_kobj; | |
| EXPORT_SYMBOL_GPL(acpi_kobj); | |
| static int __init acpi_init(void) | |
| { | |
| int result; | |
| if (acpi_disabled) { | |
| printk(KERN_INFO PREFIX "Interpreter disabled.\n"); | |
| return -ENODEV; | |
| } | |
| acpi_kobj = kobject_create_and_add("acpi", firmware_kobj); | |
| if (!acpi_kobj) { | |
| printk(KERN_WARNING "%s: kset create error\n", __func__); | |
| acpi_kobj = NULL; | |
| } | |
| init_acpi_device_notify(); | |
| result = acpi_bus_init(); | |
| if (result) { | |
| disable_acpi(); | |
| return result; | |
| } | |
| pci_mmcfg_late_init(); | |
| acpi_iort_init(); | |
| acpi_scan_init(); | |
| acpi_ec_init(); | |
| acpi_debugfs_init(); | |
| acpi_sleep_proc_init(); | |
| acpi_wakeup_device_init(); | |
| acpi_debugger_init(); | |
| acpi_setup_sb_notify_handler(); | |
| acpi_set_processor_mapping(); | |
| return 0; | |
| } | |
| subsys_initcall(acpi_init); |