| /* | |
| * AppliedMicro X-Gene SoC SATA Host Controller Driver | |
| * | |
| * Copyright (c) 2014, Applied Micro Circuits Corporation | |
| * Author: Loc Ho <lho@apm.com> | |
| * Tuan Phan <tphan@apm.com> | |
| * Suman Tripathi <stripathi@apm.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| * | |
| * NOTE: PM support is not currently available. | |
| * | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/ahci_platform.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/phy/phy.h> | |
| #include "ahci.h" | |
| #define DRV_NAME "xgene-ahci" | |
| /* Max # of disk per a controller */ | |
| #define MAX_AHCI_CHN_PERCTR 2 | |
| /* MUX CSR */ | |
| #define SATA_ENET_CONFIG_REG 0x00000000 | |
| #define CFG_SATA_ENET_SELECT_MASK 0x00000001 | |
| /* SATA core host controller CSR */ | |
| #define SLVRDERRATTRIBUTES 0x00000000 | |
| #define SLVWRERRATTRIBUTES 0x00000004 | |
| #define MSTRDERRATTRIBUTES 0x00000008 | |
| #define MSTWRERRATTRIBUTES 0x0000000c | |
| #define BUSCTLREG 0x00000014 | |
| #define IOFMSTRWAUX 0x00000018 | |
| #define INTSTATUSMASK 0x0000002c | |
| #define ERRINTSTATUS 0x00000030 | |
| #define ERRINTSTATUSMASK 0x00000034 | |
| /* SATA host AHCI CSR */ | |
| #define PORTCFG 0x000000a4 | |
| #define PORTADDR_SET(dst, src) \ | |
| (((dst) & ~0x0000003f) | (((u32)(src)) & 0x0000003f)) | |
| #define PORTPHY1CFG 0x000000a8 | |
| #define PORTPHY1CFG_FRCPHYRDY_SET(dst, src) \ | |
| (((dst) & ~0x00100000) | (((u32)(src) << 0x14) & 0x00100000)) | |
| #define PORTPHY2CFG 0x000000ac | |
| #define PORTPHY3CFG 0x000000b0 | |
| #define PORTPHY4CFG 0x000000b4 | |
| #define PORTPHY5CFG 0x000000b8 | |
| #define SCTL0 0x0000012C | |
| #define PORTPHY5CFG_RTCHG_SET(dst, src) \ | |
| (((dst) & ~0xfff00000) | (((u32)(src) << 0x14) & 0xfff00000)) | |
| #define PORTAXICFG_EN_CONTEXT_SET(dst, src) \ | |
| (((dst) & ~0x01000000) | (((u32)(src) << 0x18) & 0x01000000)) | |
| #define PORTAXICFG 0x000000bc | |
| #define PORTAXICFG_OUTTRANS_SET(dst, src) \ | |
| (((dst) & ~0x00f00000) | (((u32)(src) << 0x14) & 0x00f00000)) | |
| #define PORTRANSCFG 0x000000c8 | |
| #define PORTRANSCFG_RXWM_SET(dst, src) \ | |
| (((dst) & ~0x0000007f) | (((u32)(src)) & 0x0000007f)) | |
| /* SATA host controller AXI CSR */ | |
| #define INT_SLV_TMOMASK 0x00000010 | |
| /* SATA diagnostic CSR */ | |
| #define CFG_MEM_RAM_SHUTDOWN 0x00000070 | |
| #define BLOCK_MEM_RDY 0x00000074 | |
| /* Max retry for link down */ | |
| #define MAX_LINK_DOWN_RETRY 3 | |
| enum xgene_ahci_version { | |
| XGENE_AHCI_V1 = 1, | |
| XGENE_AHCI_V2, | |
| }; | |
| struct xgene_ahci_context { | |
| struct ahci_host_priv *hpriv; | |
| struct device *dev; | |
| u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/ | |
| u32 class[MAX_AHCI_CHN_PERCTR]; /* tracking the class of device */ | |
| void __iomem *csr_core; /* Core CSR address of IP */ | |
| void __iomem *csr_diag; /* Diag CSR address of IP */ | |
| void __iomem *csr_axi; /* AXI CSR address of IP */ | |
| void __iomem *csr_mux; /* MUX CSR address of IP */ | |
| }; | |
| static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) | |
| { | |
| dev_dbg(ctx->dev, "Release memory from shutdown\n"); | |
| writel(0x0, ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); | |
| readl(ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); /* Force a barrier */ | |
| msleep(1); /* reset may take up to 1ms */ | |
| if (readl(ctx->csr_diag + BLOCK_MEM_RDY) != 0xFFFFFFFF) { | |
| dev_err(ctx->dev, "failed to release memory from shutdown\n"); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * xgene_ahci_poll_reg_val- Poll a register on a specific value. | |
| * @ap : ATA port of interest. | |
| * @reg : Register of interest. | |
| * @val : Value to be attained. | |
| * @interval : waiting interval for polling. | |
| * @timeout : timeout for achieving the value. | |
| */ | |
| static int xgene_ahci_poll_reg_val(struct ata_port *ap, | |
| void __iomem *reg, unsigned | |
| int val, unsigned long interval, | |
| unsigned long timeout) | |
| { | |
| unsigned long deadline; | |
| unsigned int tmp; | |
| tmp = ioread32(reg); | |
| deadline = ata_deadline(jiffies, timeout); | |
| while (tmp != val && time_before(jiffies, deadline)) { | |
| ata_msleep(ap, interval); | |
| tmp = ioread32(reg); | |
| } | |
| return tmp; | |
| } | |
| /** | |
| * xgene_ahci_restart_engine - Restart the dma engine. | |
| * @ap : ATA port of interest | |
| * | |
| * Waits for completion of multiple commands and restarts | |
| * the DMA engine inside the controller. | |
| */ | |
| static int xgene_ahci_restart_engine(struct ata_port *ap) | |
| { | |
| struct ahci_host_priv *hpriv = ap->host->private_data; | |
| struct ahci_port_priv *pp = ap->private_data; | |
| void __iomem *port_mmio = ahci_port_base(ap); | |
| u32 fbs; | |
| /* | |
| * In case of PMP multiple IDENTIFY DEVICE commands can be | |
| * issued inside PxCI. So need to poll PxCI for the | |
| * completion of outstanding IDENTIFY DEVICE commands before | |
| * we restart the DMA engine. | |
| */ | |
| if (xgene_ahci_poll_reg_val(ap, port_mmio + | |
| PORT_CMD_ISSUE, 0x0, 1, 100)) | |
| return -EBUSY; | |
| ahci_stop_engine(ap); | |
| ahci_start_fis_rx(ap); | |
| /* | |
| * Enable the PxFBS.FBS_EN bit as it | |
| * gets cleared due to stopping the engine. | |
| */ | |
| if (pp->fbs_supported) { | |
| fbs = readl(port_mmio + PORT_FBS); | |
| writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); | |
| fbs = readl(port_mmio + PORT_FBS); | |
| } | |
| hpriv->start_engine(ap); | |
| return 0; | |
| } | |
| /** | |
| * xgene_ahci_qc_issue - Issue commands to the device | |
| * @qc: Command to issue | |
| * | |
| * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot | |
| * clear the BSY bit after receiving the PIO setup FIS. This results in the dma | |
| * state machine goes into the CMFatalErrorUpdate state and locks up. By | |
| * restarting the dma engine, it removes the controller out of lock up state. | |
| * | |
| * Due to H/W errata, the controller is unable to save the PMP | |
| * field fetched from command header before sending the H2D FIS. | |
| * When the device returns the PMP port field in the D2H FIS, there is | |
| * a mismatch and results in command completion failure. The | |
| * workaround is to write the pmp value to PxFBS.DEV field before issuing | |
| * any command to PMP. | |
| */ | |
| static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc) | |
| { | |
| struct ata_port *ap = qc->ap; | |
| struct ahci_host_priv *hpriv = ap->host->private_data; | |
| struct xgene_ahci_context *ctx = hpriv->plat_data; | |
| int rc = 0; | |
| u32 port_fbs; | |
| void *port_mmio = ahci_port_base(ap); | |
| /* | |
| * Write the pmp value to PxFBS.DEV | |
| * for case of Port Mulitplier. | |
| */ | |
| if (ctx->class[ap->port_no] == ATA_DEV_PMP) { | |
| port_fbs = readl(port_mmio + PORT_FBS); | |
| port_fbs &= ~PORT_FBS_DEV_MASK; | |
| port_fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; | |
| writel(port_fbs, port_mmio + PORT_FBS); | |
| } | |
| if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) || | |
| (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET) || | |
| (ctx->last_cmd[ap->port_no] == ATA_CMD_SMART))) | |
| xgene_ahci_restart_engine(ap); | |
| rc = ahci_qc_issue(qc); | |
| /* Save the last command issued */ | |
| ctx->last_cmd[ap->port_no] = qc->tf.command; | |
| return rc; | |
| } | |
| static bool xgene_ahci_is_memram_inited(struct xgene_ahci_context *ctx) | |
| { | |
| void __iomem *diagcsr = ctx->csr_diag; | |
| return (readl(diagcsr + CFG_MEM_RAM_SHUTDOWN) == 0 && | |
| readl(diagcsr + BLOCK_MEM_RDY) == 0xFFFFFFFF); | |
| } | |
| /** | |
| * xgene_ahci_read_id - Read ID data from the specified device | |
| * @dev: device | |
| * @tf: proposed taskfile | |
| * @id: data buffer | |
| * | |
| * This custom read ID function is required due to the fact that the HW | |
| * does not support DEVSLP. | |
| */ | |
| static unsigned int xgene_ahci_read_id(struct ata_device *dev, | |
| struct ata_taskfile *tf, u16 *id) | |
| { | |
| u32 err_mask; | |
| err_mask = ata_do_dev_read_id(dev, tf, id); | |
| if (err_mask) | |
| return err_mask; | |
| /* | |
| * Mask reserved area. Word78 spec of Link Power Management | |
| * bit15-8: reserved | |
| * bit7: NCQ autosence | |
| * bit6: Software settings preservation supported | |
| * bit5: reserved | |
| * bit4: In-order sata delivery supported | |
| * bit3: DIPM requests supported | |
| * bit2: DMA Setup FIS Auto-Activate optimization supported | |
| * bit1: DMA Setup FIX non-Zero buffer offsets supported | |
| * bit0: Reserved | |
| * | |
| * Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP | |
| */ | |
| id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8)); | |
| return 0; | |
| } | |
| static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel) | |
| { | |
| void __iomem *mmio = ctx->hpriv->mmio; | |
| u32 val; | |
| dev_dbg(ctx->dev, "port configure mmio 0x%p channel %d\n", | |
| mmio, channel); | |
| val = readl(mmio + PORTCFG); | |
| val = PORTADDR_SET(val, channel == 0 ? 2 : 3); | |
| writel(val, mmio + PORTCFG); | |
| readl(mmio + PORTCFG); /* Force a barrier */ | |
| /* Disable fix rate */ | |
| writel(0x0001fffe, mmio + PORTPHY1CFG); | |
| readl(mmio + PORTPHY1CFG); /* Force a barrier */ | |
| writel(0x28183219, mmio + PORTPHY2CFG); | |
| readl(mmio + PORTPHY2CFG); /* Force a barrier */ | |
| writel(0x13081008, mmio + PORTPHY3CFG); | |
| readl(mmio + PORTPHY3CFG); /* Force a barrier */ | |
| writel(0x00480815, mmio + PORTPHY4CFG); | |
| readl(mmio + PORTPHY4CFG); /* Force a barrier */ | |
| /* Set window negotiation */ | |
| val = readl(mmio + PORTPHY5CFG); | |
| val = PORTPHY5CFG_RTCHG_SET(val, 0x300); | |
| writel(val, mmio + PORTPHY5CFG); | |
| readl(mmio + PORTPHY5CFG); /* Force a barrier */ | |
| val = readl(mmio + PORTAXICFG); | |
| val = PORTAXICFG_EN_CONTEXT_SET(val, 0x1); /* Enable context mgmt */ | |
| val = PORTAXICFG_OUTTRANS_SET(val, 0xe); /* Set outstanding */ | |
| writel(val, mmio + PORTAXICFG); | |
| readl(mmio + PORTAXICFG); /* Force a barrier */ | |
| /* Set the watermark threshold of the receive FIFO */ | |
| val = readl(mmio + PORTRANSCFG); | |
| val = PORTRANSCFG_RXWM_SET(val, 0x30); | |
| writel(val, mmio + PORTRANSCFG); | |
| } | |
| /** | |
| * xgene_ahci_do_hardreset - Issue the actual COMRESET | |
| * @link: link to reset | |
| * @deadline: deadline jiffies for the operation | |
| * @online: Return value to indicate if device online | |
| * | |
| * Due to the limitation of the hardware PHY, a difference set of setting is | |
| * required for each supported disk speed - Gen3 (6.0Gbps), Gen2 (3.0Gbps), | |
| * and Gen1 (1.5Gbps). Otherwise during long IO stress test, the PHY will | |
| * report disparity error and etc. In addition, during COMRESET, there can | |
| * be error reported in the register PORT_SCR_ERR. For SERR_DISPARITY and | |
| * SERR_10B_8B_ERR, the PHY receiver line must be reseted. Also during long | |
| * reboot cycle regression, sometimes the PHY reports link down even if the | |
| * device is present because of speed negotiation failure. so need to retry | |
| * the COMRESET to get the link up. The following algorithm is followed to | |
| * proper configure the hardware PHY during COMRESET: | |
| * | |
| * Alg Part 1: | |
| * 1. Start the PHY at Gen3 speed (default setting) | |
| * 2. Issue the COMRESET | |
| * 3. If no link, go to Alg Part 3 | |
| * 4. If link up, determine if the negotiated speed matches the PHY | |
| * configured speed | |
| * 5. If they matched, go to Alg Part 2 | |
| * 6. If they do not matched and first time, configure the PHY for the linked | |
| * up disk speed and repeat step 2 | |
| * 7. Go to Alg Part 2 | |
| * | |
| * Alg Part 2: | |
| * 1. On link up, if there are any SERR_DISPARITY and SERR_10B_8B_ERR error | |
| * reported in the register PORT_SCR_ERR, then reset the PHY receiver line | |
| * 2. Go to Alg Part 4 | |
| * | |
| * Alg Part 3: | |
| * 1. Check the PORT_SCR_STAT to see whether device presence detected but PHY | |
| * communication establishment failed and maximum link down attempts are | |
| * less than Max attempts 3 then goto Alg Part 1. | |
| * 2. Go to Alg Part 4. | |
| * | |
| * Alg Part 4: | |
| * 1. Clear any pending from register PORT_SCR_ERR. | |
| * | |
| * NOTE: For the initial version, we will NOT support Gen1/Gen2. In addition | |
| * and until the underlying PHY supports an method to reset the receiver | |
| * line, on detection of SERR_DISPARITY or SERR_10B_8B_ERR errors, | |
| * an warning message will be printed. | |
| */ | |
| static int xgene_ahci_do_hardreset(struct ata_link *link, | |
| unsigned long deadline, bool *online) | |
| { | |
| const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); | |
| struct ata_port *ap = link->ap; | |
| struct ahci_host_priv *hpriv = ap->host->private_data; | |
| struct xgene_ahci_context *ctx = hpriv->plat_data; | |
| struct ahci_port_priv *pp = ap->private_data; | |
| u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; | |
| void __iomem *port_mmio = ahci_port_base(ap); | |
| struct ata_taskfile tf; | |
| int link_down_retry = 0; | |
| int rc; | |
| u32 val, sstatus; | |
| do { | |
| /* clear D2H reception area to properly wait for D2H FIS */ | |
| ata_tf_init(link->device, &tf); | |
| tf.command = ATA_BUSY; | |
| ata_tf_to_fis(&tf, 0, 0, d2h_fis); | |
| rc = sata_link_hardreset(link, timing, deadline, online, | |
| ahci_check_ready); | |
| if (*online) { | |
| val = readl(port_mmio + PORT_SCR_ERR); | |
| if (val & (SERR_DISPARITY | SERR_10B_8B_ERR)) | |
| dev_warn(ctx->dev, "link has error\n"); | |
| break; | |
| } | |
| sata_scr_read(link, SCR_STATUS, &sstatus); | |
| } while (link_down_retry++ < MAX_LINK_DOWN_RETRY && | |
| (sstatus & 0xff) == 0x1); | |
| /* clear all errors if any pending */ | |
| val = readl(port_mmio + PORT_SCR_ERR); | |
| writel(val, port_mmio + PORT_SCR_ERR); | |
| return rc; | |
| } | |
| static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class, | |
| unsigned long deadline) | |
| { | |
| struct ata_port *ap = link->ap; | |
| struct ahci_host_priv *hpriv = ap->host->private_data; | |
| void __iomem *port_mmio = ahci_port_base(ap); | |
| bool online; | |
| int rc; | |
| u32 portcmd_saved; | |
| u32 portclb_saved; | |
| u32 portclbhi_saved; | |
| u32 portrxfis_saved; | |
| u32 portrxfishi_saved; | |
| /* As hardreset resets these CSR, save it to restore later */ | |
| portcmd_saved = readl(port_mmio + PORT_CMD); | |
| portclb_saved = readl(port_mmio + PORT_LST_ADDR); | |
| portclbhi_saved = readl(port_mmio + PORT_LST_ADDR_HI); | |
| portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR); | |
| portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI); | |
| ahci_stop_engine(ap); | |
| rc = xgene_ahci_do_hardreset(link, deadline, &online); | |
| /* As controller hardreset clears them, restore them */ | |
| writel(portcmd_saved, port_mmio + PORT_CMD); | |
| writel(portclb_saved, port_mmio + PORT_LST_ADDR); | |
| writel(portclbhi_saved, port_mmio + PORT_LST_ADDR_HI); | |
| writel(portrxfis_saved, port_mmio + PORT_FIS_ADDR); | |
| writel(portrxfishi_saved, port_mmio + PORT_FIS_ADDR_HI); | |
| hpriv->start_engine(ap); | |
| if (online) | |
| *class = ahci_dev_classify(ap); | |
| return rc; | |
| } | |
| static void xgene_ahci_host_stop(struct ata_host *host) | |
| { | |
| struct ahci_host_priv *hpriv = host->private_data; | |
| ahci_platform_disable_resources(hpriv); | |
| } | |
| /** | |
| * xgene_ahci_pmp_softreset - Issue the softreset to the drives connected | |
| * to Port Multiplier. | |
| * @link: link to reset | |
| * @class: Return value to indicate class of device | |
| * @deadline: deadline jiffies for the operation | |
| * | |
| * Due to H/W errata, the controller is unable to save the PMP | |
| * field fetched from command header before sending the H2D FIS. | |
| * When the device returns the PMP port field in the D2H FIS, there is | |
| * a mismatch and results in command completion failure. The workaround | |
| * is to write the pmp value to PxFBS.DEV field before issuing any command | |
| * to PMP. | |
| */ | |
| static int xgene_ahci_pmp_softreset(struct ata_link *link, unsigned int *class, | |
| unsigned long deadline) | |
| { | |
| int pmp = sata_srst_pmp(link); | |
| struct ata_port *ap = link->ap; | |
| u32 rc; | |
| void *port_mmio = ahci_port_base(ap); | |
| u32 port_fbs; | |
| /* | |
| * Set PxFBS.DEV field with pmp | |
| * value. | |
| */ | |
| port_fbs = readl(port_mmio + PORT_FBS); | |
| port_fbs &= ~PORT_FBS_DEV_MASK; | |
| port_fbs |= pmp << PORT_FBS_DEV_OFFSET; | |
| writel(port_fbs, port_mmio + PORT_FBS); | |
| rc = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); | |
| return rc; | |
| } | |
| /** | |
| * xgene_ahci_softreset - Issue the softreset to the drive. | |
| * @link: link to reset | |
| * @class: Return value to indicate class of device | |
| * @deadline: deadline jiffies for the operation | |
| * | |
| * Due to H/W errata, the controller is unable to save the PMP | |
| * field fetched from command header before sending the H2D FIS. | |
| * When the device returns the PMP port field in the D2H FIS, there is | |
| * a mismatch and results in command completion failure. The workaround | |
| * is to write the pmp value to PxFBS.DEV field before issuing any command | |
| * to PMP. Here is the algorithm to detect PMP : | |
| * | |
| * 1. Save the PxFBS value | |
| * 2. Program PxFBS.DEV with pmp value send by framework. Framework sends | |
| * 0xF for both PMP/NON-PMP initially | |
| * 3. Issue softreset | |
| * 4. If signature class is PMP goto 6 | |
| * 5. restore the original PxFBS and goto 3 | |
| * 6. return | |
| */ | |
| static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class, | |
| unsigned long deadline) | |
| { | |
| int pmp = sata_srst_pmp(link); | |
| struct ata_port *ap = link->ap; | |
| struct ahci_host_priv *hpriv = ap->host->private_data; | |
| struct xgene_ahci_context *ctx = hpriv->plat_data; | |
| void *port_mmio = ahci_port_base(ap); | |
| u32 port_fbs; | |
| u32 port_fbs_save; | |
| u32 retry = 1; | |
| u32 rc; | |
| port_fbs_save = readl(port_mmio + PORT_FBS); | |
| /* | |
| * Set PxFBS.DEV field with pmp | |
| * value. | |
| */ | |
| port_fbs = readl(port_mmio + PORT_FBS); | |
| port_fbs &= ~PORT_FBS_DEV_MASK; | |
| port_fbs |= pmp << PORT_FBS_DEV_OFFSET; | |
| writel(port_fbs, port_mmio + PORT_FBS); | |
| softreset_retry: | |
| rc = ahci_do_softreset(link, class, pmp, | |
| deadline, ahci_check_ready); | |
| ctx->class[ap->port_no] = *class; | |
| if (*class != ATA_DEV_PMP) { | |
| /* | |
| * Retry for normal drives without | |
| * setting PxFBS.DEV field with pmp value. | |
| */ | |
| if (retry--) { | |
| writel(port_fbs_save, port_mmio + PORT_FBS); | |
| goto softreset_retry; | |
| } | |
| } | |
| return rc; | |
| } | |
| /** | |
| * xgene_ahci_handle_broken_edge_irq - Handle the broken irq. | |
| * @ata_host: Host that recieved the irq | |
| * @irq_masked: HOST_IRQ_STAT value | |
| * | |
| * For hardware with broken edge trigger latch | |
| * the HOST_IRQ_STAT register misses the edge interrupt | |
| * when clearing of HOST_IRQ_STAT register and hardware | |
| * reporting the PORT_IRQ_STAT register at the | |
| * same clock cycle. | |
| * As such, the algorithm below outlines the workaround. | |
| * | |
| * 1. Read HOST_IRQ_STAT register and save the state. | |
| * 2. Clear the HOST_IRQ_STAT register. | |
| * 3. Read back the HOST_IRQ_STAT register. | |
| * 4. If HOST_IRQ_STAT register equals to zero, then | |
| * traverse the rest of port's PORT_IRQ_STAT register | |
| * to check if an interrupt is triggered at that point else | |
| * go to step 6. | |
| * 5. If PORT_IRQ_STAT register of rest ports is not equal to zero | |
| * then update the state of HOST_IRQ_STAT saved in step 1. | |
| * 6. Handle port interrupts. | |
| * 7. Exit | |
| */ | |
| static int xgene_ahci_handle_broken_edge_irq(struct ata_host *host, | |
| u32 irq_masked) | |
| { | |
| struct ahci_host_priv *hpriv = host->private_data; | |
| void __iomem *port_mmio; | |
| int i; | |
| if (!readl(hpriv->mmio + HOST_IRQ_STAT)) { | |
| for (i = 0; i < host->n_ports; i++) { | |
| if (irq_masked & (1 << i)) | |
| continue; | |
| port_mmio = ahci_port_base(host->ports[i]); | |
| if (readl(port_mmio + PORT_IRQ_STAT)) | |
| irq_masked |= (1 << i); | |
| } | |
| } | |
| return ahci_handle_port_intr(host, irq_masked); | |
| } | |
| static irqreturn_t xgene_ahci_irq_intr(int irq, void *dev_instance) | |
| { | |
| struct ata_host *host = dev_instance; | |
| struct ahci_host_priv *hpriv; | |
| unsigned int rc = 0; | |
| void __iomem *mmio; | |
| u32 irq_stat, irq_masked; | |
| VPRINTK("ENTER\n"); | |
| hpriv = host->private_data; | |
| mmio = hpriv->mmio; | |
| /* sigh. 0xffffffff is a valid return from h/w */ | |
| irq_stat = readl(mmio + HOST_IRQ_STAT); | |
| if (!irq_stat) | |
| return IRQ_NONE; | |
| irq_masked = irq_stat & hpriv->port_map; | |
| spin_lock(&host->lock); | |
| /* | |
| * HOST_IRQ_STAT behaves as edge triggered latch meaning that | |
| * it should be cleared before all the port events are cleared. | |
| */ | |
| writel(irq_stat, mmio + HOST_IRQ_STAT); | |
| rc = xgene_ahci_handle_broken_edge_irq(host, irq_masked); | |
| spin_unlock(&host->lock); | |
| VPRINTK("EXIT\n"); | |
| return IRQ_RETVAL(rc); | |
| } | |
| static struct ata_port_operations xgene_ahci_v1_ops = { | |
| .inherits = &ahci_ops, | |
| .host_stop = xgene_ahci_host_stop, | |
| .hardreset = xgene_ahci_hardreset, | |
| .read_id = xgene_ahci_read_id, | |
| .qc_issue = xgene_ahci_qc_issue, | |
| .softreset = xgene_ahci_softreset, | |
| .pmp_softreset = xgene_ahci_pmp_softreset | |
| }; | |
| static const struct ata_port_info xgene_ahci_v1_port_info = { | |
| .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, | |
| .pio_mask = ATA_PIO4, | |
| .udma_mask = ATA_UDMA6, | |
| .port_ops = &xgene_ahci_v1_ops, | |
| }; | |
| static struct ata_port_operations xgene_ahci_v2_ops = { | |
| .inherits = &ahci_ops, | |
| .host_stop = xgene_ahci_host_stop, | |
| .hardreset = xgene_ahci_hardreset, | |
| .read_id = xgene_ahci_read_id, | |
| }; | |
| static const struct ata_port_info xgene_ahci_v2_port_info = { | |
| .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, | |
| .pio_mask = ATA_PIO4, | |
| .udma_mask = ATA_UDMA6, | |
| .port_ops = &xgene_ahci_v2_ops, | |
| }; | |
| static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv) | |
| { | |
| struct xgene_ahci_context *ctx = hpriv->plat_data; | |
| int i; | |
| int rc; | |
| u32 val; | |
| /* Remove IP RAM out of shutdown */ | |
| rc = xgene_ahci_init_memram(ctx); | |
| if (rc) | |
| return rc; | |
| for (i = 0; i < MAX_AHCI_CHN_PERCTR; i++) | |
| xgene_ahci_set_phy_cfg(ctx, i); | |
| /* AXI disable Mask */ | |
| writel(0xffffffff, hpriv->mmio + HOST_IRQ_STAT); | |
| readl(hpriv->mmio + HOST_IRQ_STAT); /* Force a barrier */ | |
| writel(0, ctx->csr_core + INTSTATUSMASK); | |
| val = readl(ctx->csr_core + INTSTATUSMASK); /* Force a barrier */ | |
| dev_dbg(ctx->dev, "top level interrupt mask 0x%X value 0x%08X\n", | |
| INTSTATUSMASK, val); | |
| writel(0x0, ctx->csr_core + ERRINTSTATUSMASK); | |
| readl(ctx->csr_core + ERRINTSTATUSMASK); /* Force a barrier */ | |
| writel(0x0, ctx->csr_axi + INT_SLV_TMOMASK); | |
| readl(ctx->csr_axi + INT_SLV_TMOMASK); | |
| /* Enable AXI Interrupt */ | |
| writel(0xffffffff, ctx->csr_core + SLVRDERRATTRIBUTES); | |
| writel(0xffffffff, ctx->csr_core + SLVWRERRATTRIBUTES); | |
| writel(0xffffffff, ctx->csr_core + MSTRDERRATTRIBUTES); | |
| writel(0xffffffff, ctx->csr_core + MSTWRERRATTRIBUTES); | |
| /* Enable coherency */ | |
| val = readl(ctx->csr_core + BUSCTLREG); | |
| val &= ~0x00000002; /* Enable write coherency */ | |
| val &= ~0x00000001; /* Enable read coherency */ | |
| writel(val, ctx->csr_core + BUSCTLREG); | |
| val = readl(ctx->csr_core + IOFMSTRWAUX); | |
| val |= (1 << 3); /* Enable read coherency */ | |
| val |= (1 << 9); /* Enable write coherency */ | |
| writel(val, ctx->csr_core + IOFMSTRWAUX); | |
| val = readl(ctx->csr_core + IOFMSTRWAUX); | |
| dev_dbg(ctx->dev, "coherency 0x%X value 0x%08X\n", | |
| IOFMSTRWAUX, val); | |
| return rc; | |
| } | |
| static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx) | |
| { | |
| u32 val; | |
| /* Check for optional MUX resource */ | |
| if (!ctx->csr_mux) | |
| return 0; | |
| val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); | |
| val &= ~CFG_SATA_ENET_SELECT_MASK; | |
| writel(val, ctx->csr_mux + SATA_ENET_CONFIG_REG); | |
| val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); | |
| return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0; | |
| } | |
| static struct scsi_host_template ahci_platform_sht = { | |
| AHCI_SHT(DRV_NAME), | |
| }; | |
| #ifdef CONFIG_ACPI | |
| static const struct acpi_device_id xgene_ahci_acpi_match[] = { | |
| { "APMC0D0D", XGENE_AHCI_V1}, | |
| { "APMC0D32", XGENE_AHCI_V2}, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); | |
| #endif | |
| static const struct of_device_id xgene_ahci_of_match[] = { | |
| {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1}, | |
| {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2}, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, xgene_ahci_of_match); | |
| static int xgene_ahci_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct ahci_host_priv *hpriv; | |
| struct xgene_ahci_context *ctx; | |
| struct resource *res; | |
| const struct of_device_id *of_devid; | |
| enum xgene_ahci_version version = XGENE_AHCI_V1; | |
| const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info, | |
| &xgene_ahci_v2_port_info }; | |
| int rc; | |
| hpriv = ahci_platform_get_resources(pdev); | |
| if (IS_ERR(hpriv)) | |
| return PTR_ERR(hpriv); | |
| ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); | |
| if (!ctx) | |
| return -ENOMEM; | |
| hpriv->plat_data = ctx; | |
| ctx->hpriv = hpriv; | |
| ctx->dev = dev; | |
| /* Retrieve the IP core resource */ | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); | |
| ctx->csr_core = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(ctx->csr_core)) | |
| return PTR_ERR(ctx->csr_core); | |
| /* Retrieve the IP diagnostic resource */ | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 2); | |
| ctx->csr_diag = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(ctx->csr_diag)) | |
| return PTR_ERR(ctx->csr_diag); | |
| /* Retrieve the IP AXI resource */ | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 3); | |
| ctx->csr_axi = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(ctx->csr_axi)) | |
| return PTR_ERR(ctx->csr_axi); | |
| /* Retrieve the optional IP mux resource */ | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 4); | |
| if (res) { | |
| void __iomem *csr = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(csr)) | |
| return PTR_ERR(csr); | |
| ctx->csr_mux = csr; | |
| } | |
| of_devid = of_match_device(xgene_ahci_of_match, dev); | |
| if (of_devid) { | |
| if (of_devid->data) | |
| version = (enum xgene_ahci_version) of_devid->data; | |
| } | |
| #ifdef CONFIG_ACPI | |
| else { | |
| const struct acpi_device_id *acpi_id; | |
| struct acpi_device_info *info; | |
| acpi_status status; | |
| acpi_id = acpi_match_device(xgene_ahci_acpi_match, &pdev->dev); | |
| if (!acpi_id) { | |
| dev_warn(&pdev->dev, "No node entry in ACPI table. Assume version1\n"); | |
| version = XGENE_AHCI_V1; | |
| } else if (acpi_id->driver_data) { | |
| version = (enum xgene_ahci_version) acpi_id->driver_data; | |
| status = acpi_get_object_info(ACPI_HANDLE(&pdev->dev), &info); | |
| if (ACPI_FAILURE(status)) { | |
| dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n", | |
| __func__); | |
| version = XGENE_AHCI_V1; | |
| } else if (info->valid & ACPI_VALID_CID) { | |
| version = XGENE_AHCI_V2; | |
| } | |
| } | |
| } | |
| #endif | |
| dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core, | |
| hpriv->mmio); | |
| /* Select ATA */ | |
| if ((rc = xgene_ahci_mux_select(ctx))) { | |
| dev_err(dev, "SATA mux selection failed error %d\n", rc); | |
| return -ENODEV; | |
| } | |
| if (xgene_ahci_is_memram_inited(ctx)) { | |
| dev_info(dev, "skip clock and PHY initialization\n"); | |
| goto skip_clk_phy; | |
| } | |
| /* Due to errata, HW requires full toggle transition */ | |
| rc = ahci_platform_enable_clks(hpriv); | |
| if (rc) | |
| goto disable_resources; | |
| ahci_platform_disable_clks(hpriv); | |
| rc = ahci_platform_enable_resources(hpriv); | |
| if (rc) | |
| goto disable_resources; | |
| /* Configure the host controller */ | |
| xgene_ahci_hw_init(hpriv); | |
| skip_clk_phy: | |
| switch (version) { | |
| case XGENE_AHCI_V1: | |
| hpriv->flags = AHCI_HFLAG_NO_NCQ; | |
| break; | |
| case XGENE_AHCI_V2: | |
| hpriv->flags |= AHCI_HFLAG_YES_FBS; | |
| hpriv->irq_handler = xgene_ahci_irq_intr; | |
| break; | |
| default: | |
| break; | |
| } | |
| rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1], | |
| &ahci_platform_sht); | |
| if (rc) | |
| goto disable_resources; | |
| dev_dbg(dev, "X-Gene SATA host controller initialized\n"); | |
| return 0; | |
| disable_resources: | |
| ahci_platform_disable_resources(hpriv); | |
| return rc; | |
| } | |
| static struct platform_driver xgene_ahci_driver = { | |
| .probe = xgene_ahci_probe, | |
| .remove = ata_platform_remove_one, | |
| .driver = { | |
| .name = DRV_NAME, | |
| .of_match_table = xgene_ahci_of_match, | |
| .acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match), | |
| }, | |
| }; | |
| module_platform_driver(xgene_ahci_driver); | |
| MODULE_DESCRIPTION("APM X-Gene AHCI SATA driver"); | |
| MODULE_AUTHOR("Loc Ho <lho@apm.com>"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_VERSION("0.4"); |