| /* | |
| * sata_sis.c - Silicon Integrated Systems SATA | |
| * | |
| * Maintained by: Uwe Koziolek | |
| * Please ALWAYS copy linux-ide@vger.kernel.org | |
| * on emails. | |
| * | |
| * Copyright 2004 Uwe Koziolek | |
| * | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; see the file COPYING. If not, write to | |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| * | |
| * libata documentation is available via 'make {ps|pdf}docs', | |
| * as Documentation/DocBook/libata.* | |
| * | |
| * Hardware documentation available under NDA. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/device.h> | |
| #include <scsi/scsi_host.h> | |
| #include <linux/libata.h> | |
| #include "sis.h" | |
| #define DRV_NAME "sata_sis" | |
| #define DRV_VERSION "1.0" | |
| enum { | |
| sis_180 = 0, | |
| SIS_SCR_PCI_BAR = 5, | |
| /* PCI configuration registers */ | |
| SIS_GENCTL = 0x54, /* IDE General Control register */ | |
| SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */ | |
| SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ | |
| SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */ | |
| SIS_PMR = 0x90, /* port mapping register */ | |
| SIS_PMR_COMBINED = 0x30, | |
| /* random bits */ | |
| SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */ | |
| GENCTL_IOMAPPED_SCR = (1 << 26), /* if set, SCRs are in IO space */ | |
| }; | |
| static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); | |
| static int sis_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); | |
| static int sis_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); | |
| static const struct pci_device_id sis_pci_tbl[] = { | |
| { PCI_VDEVICE(SI, 0x0180), sis_180 }, /* SiS 964/180 */ | |
| { PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */ | |
| { PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */ | |
| { PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */ | |
| { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/680 */ | |
| { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L/968/680 */ | |
| { } /* terminate list */ | |
| }; | |
| static struct pci_driver sis_pci_driver = { | |
| .name = DRV_NAME, | |
| .id_table = sis_pci_tbl, | |
| .probe = sis_init_one, | |
| .remove = ata_pci_remove_one, | |
| #ifdef CONFIG_PM_SLEEP | |
| .suspend = ata_pci_device_suspend, | |
| .resume = ata_pci_device_resume, | |
| #endif | |
| }; | |
| static struct scsi_host_template sis_sht = { | |
| ATA_BMDMA_SHT(DRV_NAME), | |
| }; | |
| static struct ata_port_operations sis_ops = { | |
| .inherits = &ata_bmdma_port_ops, | |
| .scr_read = sis_scr_read, | |
| .scr_write = sis_scr_write, | |
| }; | |
| static const struct ata_port_info sis_port_info = { | |
| .flags = ATA_FLAG_SATA, | |
| .pio_mask = ATA_PIO4, | |
| .mwdma_mask = ATA_MWDMA2, | |
| .udma_mask = ATA_UDMA6, | |
| .port_ops = &sis_ops, | |
| }; | |
| MODULE_AUTHOR("Uwe Koziolek"); | |
| MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DEVICE_TABLE(pci, sis_pci_tbl); | |
| MODULE_VERSION(DRV_VERSION); | |
| static unsigned int get_scr_cfg_addr(struct ata_link *link, unsigned int sc_reg) | |
| { | |
| struct ata_port *ap = link->ap; | |
| struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
| unsigned int addr = SIS_SCR_BASE + (4 * sc_reg); | |
| u8 pmr; | |
| if (ap->port_no) { | |
| switch (pdev->device) { | |
| case 0x0180: | |
| case 0x0181: | |
| pci_read_config_byte(pdev, SIS_PMR, &pmr); | |
| if ((pmr & SIS_PMR_COMBINED) == 0) | |
| addr += SIS180_SATA1_OFS; | |
| break; | |
| case 0x0182: | |
| case 0x0183: | |
| case 0x1182: | |
| addr += SIS182_SATA1_OFS; | |
| break; | |
| } | |
| } | |
| if (link->pmp) | |
| addr += 0x10; | |
| return addr; | |
| } | |
| static u32 sis_scr_cfg_read(struct ata_link *link, | |
| unsigned int sc_reg, u32 *val) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); | |
| unsigned int cfg_addr = get_scr_cfg_addr(link, sc_reg); | |
| if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */ | |
| return -EINVAL; | |
| pci_read_config_dword(pdev, cfg_addr, val); | |
| return 0; | |
| } | |
| static int sis_scr_cfg_write(struct ata_link *link, | |
| unsigned int sc_reg, u32 val) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); | |
| unsigned int cfg_addr = get_scr_cfg_addr(link, sc_reg); | |
| pci_write_config_dword(pdev, cfg_addr, val); | |
| return 0; | |
| } | |
| static int sis_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) | |
| { | |
| struct ata_port *ap = link->ap; | |
| void __iomem *base = ap->ioaddr.scr_addr + link->pmp * 0x10; | |
| if (sc_reg > SCR_CONTROL) | |
| return -EINVAL; | |
| if (ap->flags & SIS_FLAG_CFGSCR) | |
| return sis_scr_cfg_read(link, sc_reg, val); | |
| *val = ioread32(base + sc_reg * 4); | |
| return 0; | |
| } | |
| static int sis_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) | |
| { | |
| struct ata_port *ap = link->ap; | |
| void __iomem *base = ap->ioaddr.scr_addr + link->pmp * 0x10; | |
| if (sc_reg > SCR_CONTROL) | |
| return -EINVAL; | |
| if (ap->flags & SIS_FLAG_CFGSCR) | |
| return sis_scr_cfg_write(link, sc_reg, val); | |
| iowrite32(val, base + (sc_reg * 4)); | |
| return 0; | |
| } | |
| static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) | |
| { | |
| struct ata_port_info pi = sis_port_info; | |
| const struct ata_port_info *ppi[] = { &pi, &pi }; | |
| struct ata_host *host; | |
| u32 genctl, val; | |
| u8 pmr; | |
| u8 port2_start = 0x20; | |
| int i, rc; | |
| ata_print_version_once(&pdev->dev, DRV_VERSION); | |
| rc = pcim_enable_device(pdev); | |
| if (rc) | |
| return rc; | |
| /* check and see if the SCRs are in IO space or PCI cfg space */ | |
| pci_read_config_dword(pdev, SIS_GENCTL, &genctl); | |
| if ((genctl & GENCTL_IOMAPPED_SCR) == 0) | |
| pi.flags |= SIS_FLAG_CFGSCR; | |
| /* if hardware thinks SCRs are in IO space, but there are | |
| * no IO resources assigned, change to PCI cfg space. | |
| */ | |
| if ((!(pi.flags & SIS_FLAG_CFGSCR)) && | |
| ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) || | |
| (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) { | |
| genctl &= ~GENCTL_IOMAPPED_SCR; | |
| pci_write_config_dword(pdev, SIS_GENCTL, genctl); | |
| pi.flags |= SIS_FLAG_CFGSCR; | |
| } | |
| pci_read_config_byte(pdev, SIS_PMR, &pmr); | |
| switch (ent->device) { | |
| case 0x0180: | |
| case 0x0181: | |
| /* The PATA-handling is provided by pata_sis */ | |
| switch (pmr & 0x30) { | |
| case 0x10: | |
| ppi[1] = &sis_info133_for_sata; | |
| break; | |
| case 0x30: | |
| ppi[0] = &sis_info133_for_sata; | |
| break; | |
| } | |
| if ((pmr & SIS_PMR_COMBINED) == 0) { | |
| dev_info(&pdev->dev, | |
| "Detected SiS 180/181/964 chipset in SATA mode\n"); | |
| port2_start = 64; | |
| } else { | |
| dev_info(&pdev->dev, | |
| "Detected SiS 180/181 chipset in combined mode\n"); | |
| port2_start = 0; | |
| pi.flags |= ATA_FLAG_SLAVE_POSS; | |
| } | |
| break; | |
| case 0x0182: | |
| case 0x0183: | |
| pci_read_config_dword(pdev, 0x6C, &val); | |
| if (val & (1L << 31)) { | |
| dev_info(&pdev->dev, "Detected SiS 182/965 chipset\n"); | |
| pi.flags |= ATA_FLAG_SLAVE_POSS; | |
| } else { | |
| dev_info(&pdev->dev, "Detected SiS 182/965L chipset\n"); | |
| } | |
| break; | |
| case 0x1182: | |
| dev_info(&pdev->dev, | |
| "Detected SiS 1182/966/680 SATA controller\n"); | |
| pi.flags |= ATA_FLAG_SLAVE_POSS; | |
| break; | |
| case 0x1183: | |
| dev_info(&pdev->dev, | |
| "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n"); | |
| ppi[0] = &sis_info133_for_sata; | |
| ppi[1] = &sis_info133_for_sata; | |
| break; | |
| } | |
| rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); | |
| if (rc) | |
| return rc; | |
| for (i = 0; i < 2; i++) { | |
| struct ata_port *ap = host->ports[i]; | |
| if (ap->flags & ATA_FLAG_SATA && | |
| ap->flags & ATA_FLAG_SLAVE_POSS) { | |
| rc = ata_slave_link_init(ap); | |
| if (rc) | |
| return rc; | |
| } | |
| } | |
| if (!(pi.flags & SIS_FLAG_CFGSCR)) { | |
| void __iomem *mmio; | |
| rc = pcim_iomap_regions(pdev, 1 << SIS_SCR_PCI_BAR, DRV_NAME); | |
| if (rc) | |
| return rc; | |
| mmio = host->iomap[SIS_SCR_PCI_BAR]; | |
| host->ports[0]->ioaddr.scr_addr = mmio; | |
| host->ports[1]->ioaddr.scr_addr = mmio + port2_start; | |
| } | |
| pci_set_master(pdev); | |
| pci_intx(pdev, 1); | |
| return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, | |
| IRQF_SHARED, &sis_sht); | |
| } | |
| module_pci_driver(sis_pci_driver); |