| /* | |
| * drivers/base/power/sysfs.c - sysfs entries for device PM | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/string.h> | |
| #include <linux/export.h> | |
| #include <linux/pm_qos.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/atomic.h> | |
| #include <linux/jiffies.h> | |
| #include "power.h" | |
| /* | |
| * control - Report/change current runtime PM setting of the device | |
| * | |
| * Runtime power management of a device can be blocked with the help of | |
| * this attribute. All devices have one of the following two values for | |
| * the power/control file: | |
| * | |
| * + "auto\n" to allow the device to be power managed at run time; | |
| * + "on\n" to prevent the device from being power managed at run time; | |
| * | |
| * The default for all devices is "auto", which means that devices may be | |
| * subject to automatic power management, depending on their drivers. | |
| * Changing this attribute to "on" prevents the driver from power managing | |
| * the device at run time. Doing that while the device is suspended causes | |
| * it to be woken up. | |
| * | |
| * wakeup - Report/change current wakeup option for device | |
| * | |
| * Some devices support "wakeup" events, which are hardware signals | |
| * used to activate devices from suspended or low power states. Such | |
| * devices have one of three values for the sysfs power/wakeup file: | |
| * | |
| * + "enabled\n" to issue the events; | |
| * + "disabled\n" not to do so; or | |
| * + "\n" for temporary or permanent inability to issue wakeup. | |
| * | |
| * (For example, unconfigured USB devices can't issue wakeups.) | |
| * | |
| * Familiar examples of devices that can issue wakeup events include | |
| * keyboards and mice (both PS2 and USB styles), power buttons, modems, | |
| * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events | |
| * will wake the entire system from a suspend state; others may just | |
| * wake up the device (if the system as a whole is already active). | |
| * Some wakeup events use normal IRQ lines; other use special out | |
| * of band signaling. | |
| * | |
| * It is the responsibility of device drivers to enable (or disable) | |
| * wakeup signaling as part of changing device power states, respecting | |
| * the policy choices provided through the driver model. | |
| * | |
| * Devices may not be able to generate wakeup events from all power | |
| * states. Also, the events may be ignored in some configurations; | |
| * for example, they might need help from other devices that aren't | |
| * active, or which may have wakeup disabled. Some drivers rely on | |
| * wakeup events internally (unless they are disabled), keeping | |
| * their hardware in low power modes whenever they're unused. This | |
| * saves runtime power, without requiring system-wide sleep states. | |
| * | |
| * async - Report/change current async suspend setting for the device | |
| * | |
| * Asynchronous suspend and resume of the device during system-wide power | |
| * state transitions can be enabled by writing "enabled" to this file. | |
| * Analogously, if "disabled" is written to this file, the device will be | |
| * suspended and resumed synchronously. | |
| * | |
| * All devices have one of the following two values for power/async: | |
| * | |
| * + "enabled\n" to permit the asynchronous suspend/resume of the device; | |
| * + "disabled\n" to forbid it; | |
| * | |
| * NOTE: It generally is unsafe to permit the asynchronous suspend/resume | |
| * of a device unless it is certain that all of the PM dependencies of the | |
| * device are known to the PM core. However, for some devices this | |
| * attribute is set to "enabled" by bus type code or device drivers and in | |
| * that cases it should be safe to leave the default value. | |
| * | |
| * autosuspend_delay_ms - Report/change a device's autosuspend_delay value | |
| * | |
| * Some drivers don't want to carry out a runtime suspend as soon as a | |
| * device becomes idle; they want it always to remain idle for some period | |
| * of time before suspending it. This period is the autosuspend_delay | |
| * value (expressed in milliseconds) and it can be controlled by the user. | |
| * If the value is negative then the device will never be runtime | |
| * suspended. | |
| * | |
| * NOTE: The autosuspend_delay_ms attribute and the autosuspend_delay | |
| * value are used only if the driver calls pm_runtime_use_autosuspend(). | |
| * | |
| * wakeup_count - Report the number of wakeup events related to the device | |
| */ | |
| const char power_group_name[] = "power"; | |
| EXPORT_SYMBOL_GPL(power_group_name); | |
| static const char ctrl_auto[] = "auto"; | |
| static const char ctrl_on[] = "on"; | |
| static ssize_t control_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf(buf, "%s\n", | |
| dev->power.runtime_auto ? ctrl_auto : ctrl_on); | |
| } | |
| static ssize_t control_store(struct device * dev, struct device_attribute *attr, | |
| const char * buf, size_t n) | |
| { | |
| char *cp; | |
| int len = n; | |
| cp = memchr(buf, '\n', n); | |
| if (cp) | |
| len = cp - buf; | |
| device_lock(dev); | |
| if (len == sizeof ctrl_auto - 1 && strncmp(buf, ctrl_auto, len) == 0) | |
| pm_runtime_allow(dev); | |
| else if (len == sizeof ctrl_on - 1 && strncmp(buf, ctrl_on, len) == 0) | |
| pm_runtime_forbid(dev); | |
| else | |
| n = -EINVAL; | |
| device_unlock(dev); | |
| return n; | |
| } | |
| static DEVICE_ATTR(control, 0644, control_show, control_store); | |
| static ssize_t rtpm_active_time_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| int ret; | |
| spin_lock_irq(&dev->power.lock); | |
| update_pm_runtime_accounting(dev); | |
| ret = sprintf(buf, "%i\n", jiffies_to_msecs(dev->power.active_jiffies)); | |
| spin_unlock_irq(&dev->power.lock); | |
| return ret; | |
| } | |
| static DEVICE_ATTR(runtime_active_time, 0444, rtpm_active_time_show, NULL); | |
| static ssize_t rtpm_suspended_time_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| int ret; | |
| spin_lock_irq(&dev->power.lock); | |
| update_pm_runtime_accounting(dev); | |
| ret = sprintf(buf, "%i\n", | |
| jiffies_to_msecs(dev->power.suspended_jiffies)); | |
| spin_unlock_irq(&dev->power.lock); | |
| return ret; | |
| } | |
| static DEVICE_ATTR(runtime_suspended_time, 0444, rtpm_suspended_time_show, NULL); | |
| static ssize_t rtpm_status_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| const char *p; | |
| if (dev->power.runtime_error) { | |
| p = "error\n"; | |
| } else if (dev->power.disable_depth) { | |
| p = "unsupported\n"; | |
| } else { | |
| switch (dev->power.runtime_status) { | |
| case RPM_SUSPENDED: | |
| p = "suspended\n"; | |
| break; | |
| case RPM_SUSPENDING: | |
| p = "suspending\n"; | |
| break; | |
| case RPM_RESUMING: | |
| p = "resuming\n"; | |
| break; | |
| case RPM_ACTIVE: | |
| p = "active\n"; | |
| break; | |
| default: | |
| return -EIO; | |
| } | |
| } | |
| return sprintf(buf, p); | |
| } | |
| static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL); | |
| static ssize_t autosuspend_delay_ms_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| if (!dev->power.use_autosuspend) | |
| return -EIO; | |
| return sprintf(buf, "%d\n", dev->power.autosuspend_delay); | |
| } | |
| static ssize_t autosuspend_delay_ms_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, size_t n) | |
| { | |
| long delay; | |
| if (!dev->power.use_autosuspend) | |
| return -EIO; | |
| if (kstrtol(buf, 10, &delay) != 0 || delay != (int) delay) | |
| return -EINVAL; | |
| device_lock(dev); | |
| pm_runtime_set_autosuspend_delay(dev, delay); | |
| device_unlock(dev); | |
| return n; | |
| } | |
| static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show, | |
| autosuspend_delay_ms_store); | |
| static ssize_t pm_qos_resume_latency_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf(buf, "%d\n", dev_pm_qos_requested_resume_latency(dev)); | |
| } | |
| static ssize_t pm_qos_resume_latency_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t n) | |
| { | |
| s32 value; | |
| int ret; | |
| if (kstrtos32(buf, 0, &value)) | |
| return -EINVAL; | |
| if (value < 0) | |
| return -EINVAL; | |
| ret = dev_pm_qos_update_request(dev->power.qos->resume_latency_req, | |
| value); | |
| return ret < 0 ? ret : n; | |
| } | |
| static DEVICE_ATTR(pm_qos_resume_latency_us, 0644, | |
| pm_qos_resume_latency_show, pm_qos_resume_latency_store); | |
| static ssize_t pm_qos_latency_tolerance_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| s32 value = dev_pm_qos_get_user_latency_tolerance(dev); | |
| if (value < 0) | |
| return sprintf(buf, "auto\n"); | |
| else if (value == PM_QOS_LATENCY_ANY) | |
| return sprintf(buf, "any\n"); | |
| return sprintf(buf, "%d\n", value); | |
| } | |
| static ssize_t pm_qos_latency_tolerance_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t n) | |
| { | |
| s32 value; | |
| int ret; | |
| if (kstrtos32(buf, 0, &value)) { | |
| if (!strcmp(buf, "auto") || !strcmp(buf, "auto\n")) | |
| value = PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT; | |
| else if (!strcmp(buf, "any") || !strcmp(buf, "any\n")) | |
| value = PM_QOS_LATENCY_ANY; | |
| } | |
| ret = dev_pm_qos_update_user_latency_tolerance(dev, value); | |
| return ret < 0 ? ret : n; | |
| } | |
| static DEVICE_ATTR(pm_qos_latency_tolerance_us, 0644, | |
| pm_qos_latency_tolerance_show, pm_qos_latency_tolerance_store); | |
| static ssize_t pm_qos_no_power_off_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev) | |
| & PM_QOS_FLAG_NO_POWER_OFF)); | |
| } | |
| static ssize_t pm_qos_no_power_off_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t n) | |
| { | |
| int ret; | |
| if (kstrtoint(buf, 0, &ret)) | |
| return -EINVAL; | |
| if (ret != 0 && ret != 1) | |
| return -EINVAL; | |
| ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_NO_POWER_OFF, ret); | |
| return ret < 0 ? ret : n; | |
| } | |
| static DEVICE_ATTR(pm_qos_no_power_off, 0644, | |
| pm_qos_no_power_off_show, pm_qos_no_power_off_store); | |
| static ssize_t pm_qos_remote_wakeup_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev) | |
| & PM_QOS_FLAG_REMOTE_WAKEUP)); | |
| } | |
| static ssize_t pm_qos_remote_wakeup_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t n) | |
| { | |
| int ret; | |
| if (kstrtoint(buf, 0, &ret)) | |
| return -EINVAL; | |
| if (ret != 0 && ret != 1) | |
| return -EINVAL; | |
| ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP, ret); | |
| return ret < 0 ? ret : n; | |
| } | |
| static DEVICE_ATTR(pm_qos_remote_wakeup, 0644, | |
| pm_qos_remote_wakeup_show, pm_qos_remote_wakeup_store); | |
| #ifdef CONFIG_PM_SLEEP | |
| static const char _enabled[] = "enabled"; | |
| static const char _disabled[] = "disabled"; | |
| static ssize_t | |
| wake_show(struct device * dev, struct device_attribute *attr, char * buf) | |
| { | |
| return sprintf(buf, "%s\n", device_can_wakeup(dev) | |
| ? (device_may_wakeup(dev) ? _enabled : _disabled) | |
| : ""); | |
| } | |
| static ssize_t | |
| wake_store(struct device * dev, struct device_attribute *attr, | |
| const char * buf, size_t n) | |
| { | |
| char *cp; | |
| int len = n; | |
| if (!device_can_wakeup(dev)) | |
| return -EINVAL; | |
| cp = memchr(buf, '\n', n); | |
| if (cp) | |
| len = cp - buf; | |
| if (len == sizeof _enabled - 1 | |
| && strncmp(buf, _enabled, sizeof _enabled - 1) == 0) | |
| device_set_wakeup_enable(dev, 1); | |
| else if (len == sizeof _disabled - 1 | |
| && strncmp(buf, _disabled, sizeof _disabled - 1) == 0) | |
| device_set_wakeup_enable(dev, 0); | |
| else | |
| return -EINVAL; | |
| return n; | |
| } | |
| static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store); | |
| static ssize_t wakeup_count_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| unsigned long count = 0; | |
| bool enabled = false; | |
| spin_lock_irq(&dev->power.lock); | |
| if (dev->power.wakeup) { | |
| count = dev->power.wakeup->event_count; | |
| enabled = true; | |
| } | |
| spin_unlock_irq(&dev->power.lock); | |
| return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); | |
| } | |
| static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL); | |
| static ssize_t wakeup_active_count_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| unsigned long count = 0; | |
| bool enabled = false; | |
| spin_lock_irq(&dev->power.lock); | |
| if (dev->power.wakeup) { | |
| count = dev->power.wakeup->active_count; | |
| enabled = true; | |
| } | |
| spin_unlock_irq(&dev->power.lock); | |
| return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); | |
| } | |
| static DEVICE_ATTR(wakeup_active_count, 0444, wakeup_active_count_show, NULL); | |
| static ssize_t wakeup_abort_count_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| unsigned long count = 0; | |
| bool enabled = false; | |
| spin_lock_irq(&dev->power.lock); | |
| if (dev->power.wakeup) { | |
| count = dev->power.wakeup->wakeup_count; | |
| enabled = true; | |
| } | |
| spin_unlock_irq(&dev->power.lock); | |
| return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); | |
| } | |
| static DEVICE_ATTR(wakeup_abort_count, 0444, wakeup_abort_count_show, NULL); | |
| static ssize_t wakeup_expire_count_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| unsigned long count = 0; | |
| bool enabled = false; | |
| spin_lock_irq(&dev->power.lock); | |
| if (dev->power.wakeup) { | |
| count = dev->power.wakeup->expire_count; | |
| enabled = true; | |
| } | |
| spin_unlock_irq(&dev->power.lock); | |
| return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); | |
| } | |
| static DEVICE_ATTR(wakeup_expire_count, 0444, wakeup_expire_count_show, NULL); | |
| static ssize_t wakeup_active_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| unsigned int active = 0; | |
| bool enabled = false; | |
| spin_lock_irq(&dev->power.lock); | |
| if (dev->power.wakeup) { | |
| active = dev->power.wakeup->active; | |
| enabled = true; | |
| } | |
| spin_unlock_irq(&dev->power.lock); | |
| return enabled ? sprintf(buf, "%u\n", active) : sprintf(buf, "\n"); | |
| } | |
| static DEVICE_ATTR(wakeup_active, 0444, wakeup_active_show, NULL); | |
| static ssize_t wakeup_total_time_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| s64 msec = 0; | |
| bool enabled = false; | |
| spin_lock_irq(&dev->power.lock); | |
| if (dev->power.wakeup) { | |
| msec = ktime_to_ms(dev->power.wakeup->total_time); | |
| enabled = true; | |
| } | |
| spin_unlock_irq(&dev->power.lock); | |
| return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); | |
| } | |
| static DEVICE_ATTR(wakeup_total_time_ms, 0444, wakeup_total_time_show, NULL); | |
| static ssize_t wakeup_max_time_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| s64 msec = 0; | |
| bool enabled = false; | |
| spin_lock_irq(&dev->power.lock); | |
| if (dev->power.wakeup) { | |
| msec = ktime_to_ms(dev->power.wakeup->max_time); | |
| enabled = true; | |
| } | |
| spin_unlock_irq(&dev->power.lock); | |
| return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); | |
| } | |
| static DEVICE_ATTR(wakeup_max_time_ms, 0444, wakeup_max_time_show, NULL); | |
| static ssize_t wakeup_last_time_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| s64 msec = 0; | |
| bool enabled = false; | |
| spin_lock_irq(&dev->power.lock); | |
| if (dev->power.wakeup) { | |
| msec = ktime_to_ms(dev->power.wakeup->last_time); | |
| enabled = true; | |
| } | |
| spin_unlock_irq(&dev->power.lock); | |
| return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); | |
| } | |
| static DEVICE_ATTR(wakeup_last_time_ms, 0444, wakeup_last_time_show, NULL); | |
| #ifdef CONFIG_PM_AUTOSLEEP | |
| static ssize_t wakeup_prevent_sleep_time_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| s64 msec = 0; | |
| bool enabled = false; | |
| spin_lock_irq(&dev->power.lock); | |
| if (dev->power.wakeup) { | |
| msec = ktime_to_ms(dev->power.wakeup->prevent_sleep_time); | |
| enabled = true; | |
| } | |
| spin_unlock_irq(&dev->power.lock); | |
| return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); | |
| } | |
| static DEVICE_ATTR(wakeup_prevent_sleep_time_ms, 0444, | |
| wakeup_prevent_sleep_time_show, NULL); | |
| #endif /* CONFIG_PM_AUTOSLEEP */ | |
| #endif /* CONFIG_PM_SLEEP */ | |
| #ifdef CONFIG_PM_ADVANCED_DEBUG | |
| static ssize_t rtpm_usagecount_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| return sprintf(buf, "%d\n", atomic_read(&dev->power.usage_count)); | |
| } | |
| static ssize_t rtpm_children_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| return sprintf(buf, "%d\n", dev->power.ignore_children ? | |
| 0 : atomic_read(&dev->power.child_count)); | |
| } | |
| static ssize_t rtpm_enabled_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| if ((dev->power.disable_depth) && (dev->power.runtime_auto == false)) | |
| return sprintf(buf, "disabled & forbidden\n"); | |
| else if (dev->power.disable_depth) | |
| return sprintf(buf, "disabled\n"); | |
| else if (dev->power.runtime_auto == false) | |
| return sprintf(buf, "forbidden\n"); | |
| return sprintf(buf, "enabled\n"); | |
| } | |
| static DEVICE_ATTR(runtime_usage, 0444, rtpm_usagecount_show, NULL); | |
| static DEVICE_ATTR(runtime_active_kids, 0444, rtpm_children_show, NULL); | |
| static DEVICE_ATTR(runtime_enabled, 0444, rtpm_enabled_show, NULL); | |
| #ifdef CONFIG_PM_SLEEP | |
| static ssize_t async_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf(buf, "%s\n", | |
| device_async_suspend_enabled(dev) ? | |
| _enabled : _disabled); | |
| } | |
| static ssize_t async_store(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t n) | |
| { | |
| char *cp; | |
| int len = n; | |
| cp = memchr(buf, '\n', n); | |
| if (cp) | |
| len = cp - buf; | |
| if (len == sizeof _enabled - 1 && strncmp(buf, _enabled, len) == 0) | |
| device_enable_async_suspend(dev); | |
| else if (len == sizeof _disabled - 1 && | |
| strncmp(buf, _disabled, len) == 0) | |
| device_disable_async_suspend(dev); | |
| else | |
| return -EINVAL; | |
| return n; | |
| } | |
| static DEVICE_ATTR(async, 0644, async_show, async_store); | |
| #endif /* CONFIG_PM_SLEEP */ | |
| #endif /* CONFIG_PM_ADVANCED_DEBUG */ | |
| static struct attribute *power_attrs[] = { | |
| #ifdef CONFIG_PM_ADVANCED_DEBUG | |
| #ifdef CONFIG_PM_SLEEP | |
| &dev_attr_async.attr, | |
| #endif | |
| &dev_attr_runtime_status.attr, | |
| &dev_attr_runtime_usage.attr, | |
| &dev_attr_runtime_active_kids.attr, | |
| &dev_attr_runtime_enabled.attr, | |
| #endif /* CONFIG_PM_ADVANCED_DEBUG */ | |
| NULL, | |
| }; | |
| static struct attribute_group pm_attr_group = { | |
| .name = power_group_name, | |
| .attrs = power_attrs, | |
| }; | |
| static struct attribute *wakeup_attrs[] = { | |
| #ifdef CONFIG_PM_SLEEP | |
| &dev_attr_wakeup.attr, | |
| &dev_attr_wakeup_count.attr, | |
| &dev_attr_wakeup_active_count.attr, | |
| &dev_attr_wakeup_abort_count.attr, | |
| &dev_attr_wakeup_expire_count.attr, | |
| &dev_attr_wakeup_active.attr, | |
| &dev_attr_wakeup_total_time_ms.attr, | |
| &dev_attr_wakeup_max_time_ms.attr, | |
| &dev_attr_wakeup_last_time_ms.attr, | |
| #ifdef CONFIG_PM_AUTOSLEEP | |
| &dev_attr_wakeup_prevent_sleep_time_ms.attr, | |
| #endif | |
| #endif | |
| NULL, | |
| }; | |
| static struct attribute_group pm_wakeup_attr_group = { | |
| .name = power_group_name, | |
| .attrs = wakeup_attrs, | |
| }; | |
| static struct attribute *runtime_attrs[] = { | |
| #ifndef CONFIG_PM_ADVANCED_DEBUG | |
| &dev_attr_runtime_status.attr, | |
| #endif | |
| &dev_attr_control.attr, | |
| &dev_attr_runtime_suspended_time.attr, | |
| &dev_attr_runtime_active_time.attr, | |
| &dev_attr_autosuspend_delay_ms.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group pm_runtime_attr_group = { | |
| .name = power_group_name, | |
| .attrs = runtime_attrs, | |
| }; | |
| static struct attribute *pm_qos_resume_latency_attrs[] = { | |
| &dev_attr_pm_qos_resume_latency_us.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group pm_qos_resume_latency_attr_group = { | |
| .name = power_group_name, | |
| .attrs = pm_qos_resume_latency_attrs, | |
| }; | |
| static struct attribute *pm_qos_latency_tolerance_attrs[] = { | |
| &dev_attr_pm_qos_latency_tolerance_us.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group pm_qos_latency_tolerance_attr_group = { | |
| .name = power_group_name, | |
| .attrs = pm_qos_latency_tolerance_attrs, | |
| }; | |
| static struct attribute *pm_qos_flags_attrs[] = { | |
| &dev_attr_pm_qos_no_power_off.attr, | |
| &dev_attr_pm_qos_remote_wakeup.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group pm_qos_flags_attr_group = { | |
| .name = power_group_name, | |
| .attrs = pm_qos_flags_attrs, | |
| }; | |
| int dpm_sysfs_add(struct device *dev) | |
| { | |
| int rc; | |
| rc = sysfs_create_group(&dev->kobj, &pm_attr_group); | |
| if (rc) | |
| return rc; | |
| if (pm_runtime_callbacks_present(dev)) { | |
| rc = sysfs_merge_group(&dev->kobj, &pm_runtime_attr_group); | |
| if (rc) | |
| goto err_out; | |
| } | |
| if (device_can_wakeup(dev)) { | |
| rc = sysfs_merge_group(&dev->kobj, &pm_wakeup_attr_group); | |
| if (rc) | |
| goto err_runtime; | |
| } | |
| if (dev->power.set_latency_tolerance) { | |
| rc = sysfs_merge_group(&dev->kobj, | |
| &pm_qos_latency_tolerance_attr_group); | |
| if (rc) | |
| goto err_wakeup; | |
| } | |
| return 0; | |
| err_wakeup: | |
| sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group); | |
| err_runtime: | |
| sysfs_unmerge_group(&dev->kobj, &pm_runtime_attr_group); | |
| err_out: | |
| sysfs_remove_group(&dev->kobj, &pm_attr_group); | |
| return rc; | |
| } | |
| int wakeup_sysfs_add(struct device *dev) | |
| { | |
| return sysfs_merge_group(&dev->kobj, &pm_wakeup_attr_group); | |
| } | |
| void wakeup_sysfs_remove(struct device *dev) | |
| { | |
| sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group); | |
| } | |
| int pm_qos_sysfs_add_resume_latency(struct device *dev) | |
| { | |
| return sysfs_merge_group(&dev->kobj, &pm_qos_resume_latency_attr_group); | |
| } | |
| void pm_qos_sysfs_remove_resume_latency(struct device *dev) | |
| { | |
| sysfs_unmerge_group(&dev->kobj, &pm_qos_resume_latency_attr_group); | |
| } | |
| int pm_qos_sysfs_add_flags(struct device *dev) | |
| { | |
| return sysfs_merge_group(&dev->kobj, &pm_qos_flags_attr_group); | |
| } | |
| void pm_qos_sysfs_remove_flags(struct device *dev) | |
| { | |
| sysfs_unmerge_group(&dev->kobj, &pm_qos_flags_attr_group); | |
| } | |
| int pm_qos_sysfs_add_latency_tolerance(struct device *dev) | |
| { | |
| return sysfs_merge_group(&dev->kobj, | |
| &pm_qos_latency_tolerance_attr_group); | |
| } | |
| void pm_qos_sysfs_remove_latency_tolerance(struct device *dev) | |
| { | |
| sysfs_unmerge_group(&dev->kobj, &pm_qos_latency_tolerance_attr_group); | |
| } | |
| void rpm_sysfs_remove(struct device *dev) | |
| { | |
| sysfs_unmerge_group(&dev->kobj, &pm_runtime_attr_group); | |
| } | |
| void dpm_sysfs_remove(struct device *dev) | |
| { | |
| sysfs_unmerge_group(&dev->kobj, &pm_qos_latency_tolerance_attr_group); | |
| dev_pm_qos_constraints_destroy(dev); | |
| rpm_sysfs_remove(dev); | |
| sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group); | |
| sysfs_remove_group(&dev->kobj, &pm_attr_group); | |
| } |