| /* | |
| pf.c (c) 1997-8 Grant R. Guenther <grant@torque.net> | |
| Under the terms of the GNU General Public License. | |
| This is the high-level driver for parallel port ATAPI disk | |
| drives based on chips supported by the paride module. | |
| By default, the driver will autoprobe for a single parallel | |
| port ATAPI disk drive, but if their individual parameters are | |
| specified, the driver can handle up to 4 drives. | |
| The behaviour of the pf driver can be altered by setting | |
| some parameters from the insmod command line. The following | |
| parameters are adjustable: | |
| drive0 These four arguments can be arrays of | |
| drive1 1-7 integers as follows: | |
| drive2 | |
| drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<lun>,<dly> | |
| Where, | |
| <prt> is the base of the parallel port address for | |
| the corresponding drive. (required) | |
| <pro> is the protocol number for the adapter that | |
| supports this drive. These numbers are | |
| logged by 'paride' when the protocol modules | |
| are initialised. (0 if not given) | |
| <uni> for those adapters that support chained | |
| devices, this is the unit selector for the | |
| chain of devices on the given port. It should | |
| be zero for devices that don't support chaining. | |
| (0 if not given) | |
| <mod> this can be -1 to choose the best mode, or one | |
| of the mode numbers supported by the adapter. | |
| (-1 if not given) | |
| <slv> ATAPI CDroms can be jumpered to master or slave. | |
| Set this to 0 to choose the master drive, 1 to | |
| choose the slave, -1 (the default) to choose the | |
| first drive found. | |
| <lun> Some ATAPI devices support multiple LUNs. | |
| One example is the ATAPI PD/CD drive from | |
| Matshita/Panasonic. This device has a | |
| CD drive on LUN 0 and a PD drive on LUN 1. | |
| By default, the driver will search for the | |
| first LUN with a supported device. Set | |
| this parameter to force it to use a specific | |
| LUN. (default -1) | |
| <dly> some parallel ports require the driver to | |
| go more slowly. -1 sets a default value that | |
| should work with the chosen protocol. Otherwise, | |
| set this to a small integer, the larger it is | |
| the slower the port i/o. In some cases, setting | |
| this to zero will speed up the device. (default -1) | |
| major You may use this parameter to overide the | |
| default major number (47) that this driver | |
| will use. Be sure to change the device | |
| name as well. | |
| name This parameter is a character string that | |
| contains the name the kernel will use for this | |
| device (in /proc output, for instance). | |
| (default "pf"). | |
| cluster The driver will attempt to aggregate requests | |
| for adjacent blocks into larger multi-block | |
| clusters. The maximum cluster size (in 512 | |
| byte sectors) is set with this parameter. | |
| (default 64) | |
| verbose This parameter controls the amount of logging | |
| that the driver will do. Set it to 0 for | |
| normal operation, 1 to see autoprobe progress | |
| messages, or 2 to see additional debugging | |
| output. (default 0) | |
| nice This parameter controls the driver's use of | |
| idle CPU time, at the expense of some speed. | |
| If this driver is built into the kernel, you can use the | |
| following command line parameters, with the same values | |
| as the corresponding module parameters listed above: | |
| pf.drive0 | |
| pf.drive1 | |
| pf.drive2 | |
| pf.drive3 | |
| pf.cluster | |
| pf.nice | |
| In addition, you can use the parameter pf.disable to disable | |
| the driver entirely. | |
| */ | |
| /* Changes: | |
| 1.01 GRG 1998.05.03 Changes for SMP. Eliminate sti(). | |
| Fix for drives that don't clear STAT_ERR | |
| until after next CDB delivered. | |
| Small change in pf_completion to round | |
| up transfer size. | |
| 1.02 GRG 1998.06.16 Eliminated an Ugh | |
| 1.03 GRG 1998.08.16 Use HZ in loop timings, extra debugging | |
| 1.04 GRG 1998.09.24 Added jumbo support | |
| */ | |
| #define PF_VERSION "1.04" | |
| #define PF_MAJOR 47 | |
| #define PF_NAME "pf" | |
| #define PF_UNITS 4 | |
| #include <linux/types.h> | |
| /* Here are things one can override from the insmod command. | |
| Most are autoprobed by paride unless set here. Verbose is off | |
| by default. | |
| */ | |
| static bool verbose = 0; | |
| static int major = PF_MAJOR; | |
| static char *name = PF_NAME; | |
| static int cluster = 64; | |
| static int nice = 0; | |
| static int disable = 0; | |
| static int drive0[7] = { 0, 0, 0, -1, -1, -1, -1 }; | |
| static int drive1[7] = { 0, 0, 0, -1, -1, -1, -1 }; | |
| static int drive2[7] = { 0, 0, 0, -1, -1, -1, -1 }; | |
| static int drive3[7] = { 0, 0, 0, -1, -1, -1, -1 }; | |
| static int (*drives[4])[7] = {&drive0, &drive1, &drive2, &drive3}; | |
| static int pf_drive_count; | |
| enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_LUN, D_DLY}; | |
| /* end of parameters */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/fs.h> | |
| #include <linux/delay.h> | |
| #include <linux/hdreg.h> | |
| #include <linux/cdrom.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/blkpg.h> | |
| #include <linux/mutex.h> | |
| #include <asm/uaccess.h> | |
| static DEFINE_MUTEX(pf_mutex); | |
| static DEFINE_SPINLOCK(pf_spin_lock); | |
| module_param(verbose, bool, 0644); | |
| module_param(major, int, 0); | |
| module_param(name, charp, 0); | |
| module_param(cluster, int, 0); | |
| module_param(nice, int, 0); | |
| module_param_array(drive0, int, NULL, 0); | |
| module_param_array(drive1, int, NULL, 0); | |
| module_param_array(drive2, int, NULL, 0); | |
| module_param_array(drive3, int, NULL, 0); | |
| #include "paride.h" | |
| #include "pseudo.h" | |
| /* constants for faking geometry numbers */ | |
| #define PF_FD_MAX 8192 /* use FD geometry under this size */ | |
| #define PF_FD_HDS 2 | |
| #define PF_FD_SPT 18 | |
| #define PF_HD_HDS 64 | |
| #define PF_HD_SPT 32 | |
| #define PF_MAX_RETRIES 5 | |
| #define PF_TMO 800 /* interrupt timeout in jiffies */ | |
| #define PF_SPIN_DEL 50 /* spin delay in micro-seconds */ | |
| #define PF_SPIN (1000000*PF_TMO)/(HZ*PF_SPIN_DEL) | |
| #define STAT_ERR 0x00001 | |
| #define STAT_INDEX 0x00002 | |
| #define STAT_ECC 0x00004 | |
| #define STAT_DRQ 0x00008 | |
| #define STAT_SEEK 0x00010 | |
| #define STAT_WRERR 0x00020 | |
| #define STAT_READY 0x00040 | |
| #define STAT_BUSY 0x00080 | |
| #define ATAPI_REQ_SENSE 0x03 | |
| #define ATAPI_LOCK 0x1e | |
| #define ATAPI_DOOR 0x1b | |
| #define ATAPI_MODE_SENSE 0x5a | |
| #define ATAPI_CAPACITY 0x25 | |
| #define ATAPI_IDENTIFY 0x12 | |
| #define ATAPI_READ_10 0x28 | |
| #define ATAPI_WRITE_10 0x2a | |
| static int pf_open(struct block_device *bdev, fmode_t mode); | |
| static void do_pf_request(struct request_queue * q); | |
| static int pf_ioctl(struct block_device *bdev, fmode_t mode, | |
| unsigned int cmd, unsigned long arg); | |
| static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo); | |
| static void pf_release(struct gendisk *disk, fmode_t mode); | |
| static int pf_detect(void); | |
| static void do_pf_read(void); | |
| static void do_pf_read_start(void); | |
| static void do_pf_write(void); | |
| static void do_pf_write_start(void); | |
| static void do_pf_read_drq(void); | |
| static void do_pf_write_done(void); | |
| #define PF_NM 0 | |
| #define PF_RO 1 | |
| #define PF_RW 2 | |
| #define PF_NAMELEN 8 | |
| struct pf_unit { | |
| struct pi_adapter pia; /* interface to paride layer */ | |
| struct pi_adapter *pi; | |
| int removable; /* removable media device ? */ | |
| int media_status; /* media present ? WP ? */ | |
| int drive; /* drive */ | |
| int lun; | |
| int access; /* count of active opens ... */ | |
| int present; /* device present ? */ | |
| char name[PF_NAMELEN]; /* pf0, pf1, ... */ | |
| struct gendisk *disk; | |
| }; | |
| static struct pf_unit units[PF_UNITS]; | |
| static int pf_identify(struct pf_unit *pf); | |
| static void pf_lock(struct pf_unit *pf, int func); | |
| static void pf_eject(struct pf_unit *pf); | |
| static unsigned int pf_check_events(struct gendisk *disk, | |
| unsigned int clearing); | |
| static char pf_scratch[512]; /* scratch block buffer */ | |
| /* the variables below are used mainly in the I/O request engine, which | |
| processes only one request at a time. | |
| */ | |
| static int pf_retries = 0; /* i/o error retry count */ | |
| static int pf_busy = 0; /* request being processed ? */ | |
| static struct request *pf_req; /* current request */ | |
| static int pf_block; /* address of next requested block */ | |
| static int pf_count; /* number of blocks still to do */ | |
| static int pf_run; /* sectors in current cluster */ | |
| static int pf_cmd; /* current command READ/WRITE */ | |
| static struct pf_unit *pf_current;/* unit of current request */ | |
| static int pf_mask; /* stopper for pseudo-int */ | |
| static char *pf_buf; /* buffer for request in progress */ | |
| static void *par_drv; /* reference of parport driver */ | |
| /* kernel glue structures */ | |
| static const struct block_device_operations pf_fops = { | |
| .owner = THIS_MODULE, | |
| .open = pf_open, | |
| .release = pf_release, | |
| .ioctl = pf_ioctl, | |
| .getgeo = pf_getgeo, | |
| .check_events = pf_check_events, | |
| }; | |
| static void __init pf_init_units(void) | |
| { | |
| struct pf_unit *pf; | |
| int unit; | |
| pf_drive_count = 0; | |
| for (unit = 0, pf = units; unit < PF_UNITS; unit++, pf++) { | |
| struct gendisk *disk = alloc_disk(1); | |
| if (!disk) | |
| continue; | |
| pf->disk = disk; | |
| pf->pi = &pf->pia; | |
| pf->media_status = PF_NM; | |
| pf->drive = (*drives[unit])[D_SLV]; | |
| pf->lun = (*drives[unit])[D_LUN]; | |
| snprintf(pf->name, PF_NAMELEN, "%s%d", name, unit); | |
| disk->major = major; | |
| disk->first_minor = unit; | |
| strcpy(disk->disk_name, pf->name); | |
| disk->fops = &pf_fops; | |
| if (!(*drives[unit])[D_PRT]) | |
| pf_drive_count++; | |
| } | |
| } | |
| static int pf_open(struct block_device *bdev, fmode_t mode) | |
| { | |
| struct pf_unit *pf = bdev->bd_disk->private_data; | |
| int ret; | |
| mutex_lock(&pf_mutex); | |
| pf_identify(pf); | |
| ret = -ENODEV; | |
| if (pf->media_status == PF_NM) | |
| goto out; | |
| ret = -EROFS; | |
| if ((pf->media_status == PF_RO) && (mode & FMODE_WRITE)) | |
| goto out; | |
| ret = 0; | |
| pf->access++; | |
| if (pf->removable) | |
| pf_lock(pf, 1); | |
| out: | |
| mutex_unlock(&pf_mutex); | |
| return ret; | |
| } | |
| static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo) | |
| { | |
| struct pf_unit *pf = bdev->bd_disk->private_data; | |
| sector_t capacity = get_capacity(pf->disk); | |
| if (capacity < PF_FD_MAX) { | |
| geo->cylinders = sector_div(capacity, PF_FD_HDS * PF_FD_SPT); | |
| geo->heads = PF_FD_HDS; | |
| geo->sectors = PF_FD_SPT; | |
| } else { | |
| geo->cylinders = sector_div(capacity, PF_HD_HDS * PF_HD_SPT); | |
| geo->heads = PF_HD_HDS; | |
| geo->sectors = PF_HD_SPT; | |
| } | |
| return 0; | |
| } | |
| static int pf_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) | |
| { | |
| struct pf_unit *pf = bdev->bd_disk->private_data; | |
| if (cmd != CDROMEJECT) | |
| return -EINVAL; | |
| if (pf->access != 1) | |
| return -EBUSY; | |
| mutex_lock(&pf_mutex); | |
| pf_eject(pf); | |
| mutex_unlock(&pf_mutex); | |
| return 0; | |
| } | |
| static void pf_release(struct gendisk *disk, fmode_t mode) | |
| { | |
| struct pf_unit *pf = disk->private_data; | |
| mutex_lock(&pf_mutex); | |
| if (pf->access <= 0) { | |
| mutex_unlock(&pf_mutex); | |
| WARN_ON(1); | |
| return; | |
| } | |
| pf->access--; | |
| if (!pf->access && pf->removable) | |
| pf_lock(pf, 0); | |
| mutex_unlock(&pf_mutex); | |
| } | |
| static unsigned int pf_check_events(struct gendisk *disk, unsigned int clearing) | |
| { | |
| return DISK_EVENT_MEDIA_CHANGE; | |
| } | |
| static inline int status_reg(struct pf_unit *pf) | |
| { | |
| return pi_read_regr(pf->pi, 1, 6); | |
| } | |
| static inline int read_reg(struct pf_unit *pf, int reg) | |
| { | |
| return pi_read_regr(pf->pi, 0, reg); | |
| } | |
| static inline void write_reg(struct pf_unit *pf, int reg, int val) | |
| { | |
| pi_write_regr(pf->pi, 0, reg, val); | |
| } | |
| static int pf_wait(struct pf_unit *pf, int go, int stop, char *fun, char *msg) | |
| { | |
| int j, r, e, s, p; | |
| j = 0; | |
| while ((((r = status_reg(pf)) & go) || (stop && (!(r & stop)))) | |
| && (j++ < PF_SPIN)) | |
| udelay(PF_SPIN_DEL); | |
| if ((r & (STAT_ERR & stop)) || (j > PF_SPIN)) { | |
| s = read_reg(pf, 7); | |
| e = read_reg(pf, 1); | |
| p = read_reg(pf, 2); | |
| if (j > PF_SPIN) | |
| e |= 0x100; | |
| if (fun) | |
| printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x" | |
| " loop=%d phase=%d\n", | |
| pf->name, fun, msg, r, s, e, j, p); | |
| return (e << 8) + s; | |
| } | |
| return 0; | |
| } | |
| static int pf_command(struct pf_unit *pf, char *cmd, int dlen, char *fun) | |
| { | |
| pi_connect(pf->pi); | |
| write_reg(pf, 6, 0xa0+0x10*pf->drive); | |
| if (pf_wait(pf, STAT_BUSY | STAT_DRQ, 0, fun, "before command")) { | |
| pi_disconnect(pf->pi); | |
| return -1; | |
| } | |
| write_reg(pf, 4, dlen % 256); | |
| write_reg(pf, 5, dlen / 256); | |
| write_reg(pf, 7, 0xa0); /* ATAPI packet command */ | |
| if (pf_wait(pf, STAT_BUSY, STAT_DRQ, fun, "command DRQ")) { | |
| pi_disconnect(pf->pi); | |
| return -1; | |
| } | |
| if (read_reg(pf, 2) != 1) { | |
| printk("%s: %s: command phase error\n", pf->name, fun); | |
| pi_disconnect(pf->pi); | |
| return -1; | |
| } | |
| pi_write_block(pf->pi, cmd, 12); | |
| return 0; | |
| } | |
| static int pf_completion(struct pf_unit *pf, char *buf, char *fun) | |
| { | |
| int r, s, n; | |
| r = pf_wait(pf, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR, | |
| fun, "completion"); | |
| if ((read_reg(pf, 2) & 2) && (read_reg(pf, 7) & STAT_DRQ)) { | |
| n = (((read_reg(pf, 4) + 256 * read_reg(pf, 5)) + | |
| 3) & 0xfffc); | |
| pi_read_block(pf->pi, buf, n); | |
| } | |
| s = pf_wait(pf, STAT_BUSY, STAT_READY | STAT_ERR, fun, "data done"); | |
| pi_disconnect(pf->pi); | |
| return (r ? r : s); | |
| } | |
| static void pf_req_sense(struct pf_unit *pf, int quiet) | |
| { | |
| char rs_cmd[12] = | |
| { ATAPI_REQ_SENSE, pf->lun << 5, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 }; | |
| char buf[16]; | |
| int r; | |
| r = pf_command(pf, rs_cmd, 16, "Request sense"); | |
| mdelay(1); | |
| if (!r) | |
| pf_completion(pf, buf, "Request sense"); | |
| if ((!r) && (!quiet)) | |
| printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n", | |
| pf->name, buf[2] & 0xf, buf[12], buf[13]); | |
| } | |
| static int pf_atapi(struct pf_unit *pf, char *cmd, int dlen, char *buf, char *fun) | |
| { | |
| int r; | |
| r = pf_command(pf, cmd, dlen, fun); | |
| mdelay(1); | |
| if (!r) | |
| r = pf_completion(pf, buf, fun); | |
| if (r) | |
| pf_req_sense(pf, !fun); | |
| return r; | |
| } | |
| static void pf_lock(struct pf_unit *pf, int func) | |
| { | |
| char lo_cmd[12] = { ATAPI_LOCK, pf->lun << 5, 0, 0, func, 0, 0, 0, 0, 0, 0, 0 }; | |
| pf_atapi(pf, lo_cmd, 0, pf_scratch, func ? "lock" : "unlock"); | |
| } | |
| static void pf_eject(struct pf_unit *pf) | |
| { | |
| char ej_cmd[12] = { ATAPI_DOOR, pf->lun << 5, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 }; | |
| pf_lock(pf, 0); | |
| pf_atapi(pf, ej_cmd, 0, pf_scratch, "eject"); | |
| } | |
| #define PF_RESET_TMO 30 /* in tenths of a second */ | |
| static void pf_sleep(int cs) | |
| { | |
| schedule_timeout_interruptible(cs); | |
| } | |
| /* the ATAPI standard actually specifies the contents of all 7 registers | |
| after a reset, but the specification is ambiguous concerning the last | |
| two bytes, and different drives interpret the standard differently. | |
| */ | |
| static int pf_reset(struct pf_unit *pf) | |
| { | |
| int i, k, flg; | |
| int expect[5] = { 1, 1, 1, 0x14, 0xeb }; | |
| pi_connect(pf->pi); | |
| write_reg(pf, 6, 0xa0+0x10*pf->drive); | |
| write_reg(pf, 7, 8); | |
| pf_sleep(20 * HZ / 1000); | |
| k = 0; | |
| while ((k++ < PF_RESET_TMO) && (status_reg(pf) & STAT_BUSY)) | |
| pf_sleep(HZ / 10); | |
| flg = 1; | |
| for (i = 0; i < 5; i++) | |
| flg &= (read_reg(pf, i + 1) == expect[i]); | |
| if (verbose) { | |
| printk("%s: Reset (%d) signature = ", pf->name, k); | |
| for (i = 0; i < 5; i++) | |
| printk("%3x", read_reg(pf, i + 1)); | |
| if (!flg) | |
| printk(" (incorrect)"); | |
| printk("\n"); | |
| } | |
| pi_disconnect(pf->pi); | |
| return flg - 1; | |
| } | |
| static void pf_mode_sense(struct pf_unit *pf) | |
| { | |
| char ms_cmd[12] = | |
| { ATAPI_MODE_SENSE, pf->lun << 5, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0 }; | |
| char buf[8]; | |
| pf_atapi(pf, ms_cmd, 8, buf, "mode sense"); | |
| pf->media_status = PF_RW; | |
| if (buf[3] & 0x80) | |
| pf->media_status = PF_RO; | |
| } | |
| static void xs(char *buf, char *targ, int offs, int len) | |
| { | |
| int j, k, l; | |
| j = 0; | |
| l = 0; | |
| for (k = 0; k < len; k++) | |
| if ((buf[k + offs] != 0x20) || (buf[k + offs] != l)) | |
| l = targ[j++] = buf[k + offs]; | |
| if (l == 0x20) | |
| j--; | |
| targ[j] = 0; | |
| } | |
| static int xl(char *buf, int offs) | |
| { | |
| int v, k; | |
| v = 0; | |
| for (k = 0; k < 4; k++) | |
| v = v * 256 + (buf[k + offs] & 0xff); | |
| return v; | |
| } | |
| static void pf_get_capacity(struct pf_unit *pf) | |
| { | |
| char rc_cmd[12] = { ATAPI_CAPACITY, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; | |
| char buf[8]; | |
| int bs; | |
| if (pf_atapi(pf, rc_cmd, 8, buf, "get capacity")) { | |
| pf->media_status = PF_NM; | |
| return; | |
| } | |
| set_capacity(pf->disk, xl(buf, 0) + 1); | |
| bs = xl(buf, 4); | |
| if (bs != 512) { | |
| set_capacity(pf->disk, 0); | |
| if (verbose) | |
| printk("%s: Drive %d, LUN %d," | |
| " unsupported block size %d\n", | |
| pf->name, pf->drive, pf->lun, bs); | |
| } | |
| } | |
| static int pf_identify(struct pf_unit *pf) | |
| { | |
| int dt, s; | |
| char *ms[2] = { "master", "slave" }; | |
| char mf[10], id[18]; | |
| char id_cmd[12] = | |
| { ATAPI_IDENTIFY, pf->lun << 5, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 }; | |
| char buf[36]; | |
| s = pf_atapi(pf, id_cmd, 36, buf, "identify"); | |
| if (s) | |
| return -1; | |
| dt = buf[0] & 0x1f; | |
| if ((dt != 0) && (dt != 7)) { | |
| if (verbose) | |
| printk("%s: Drive %d, LUN %d, unsupported type %d\n", | |
| pf->name, pf->drive, pf->lun, dt); | |
| return -1; | |
| } | |
| xs(buf, mf, 8, 8); | |
| xs(buf, id, 16, 16); | |
| pf->removable = (buf[1] & 0x80); | |
| pf_mode_sense(pf); | |
| pf_mode_sense(pf); | |
| pf_mode_sense(pf); | |
| pf_get_capacity(pf); | |
| printk("%s: %s %s, %s LUN %d, type %d", | |
| pf->name, mf, id, ms[pf->drive], pf->lun, dt); | |
| if (pf->removable) | |
| printk(", removable"); | |
| if (pf->media_status == PF_NM) | |
| printk(", no media\n"); | |
| else { | |
| if (pf->media_status == PF_RO) | |
| printk(", RO"); | |
| printk(", %llu blocks\n", | |
| (unsigned long long)get_capacity(pf->disk)); | |
| } | |
| return 0; | |
| } | |
| /* returns 0, with id set if drive is detected | |
| -1, if drive detection failed | |
| */ | |
| static int pf_probe(struct pf_unit *pf) | |
| { | |
| if (pf->drive == -1) { | |
| for (pf->drive = 0; pf->drive <= 1; pf->drive++) | |
| if (!pf_reset(pf)) { | |
| if (pf->lun != -1) | |
| return pf_identify(pf); | |
| else | |
| for (pf->lun = 0; pf->lun < 8; pf->lun++) | |
| if (!pf_identify(pf)) | |
| return 0; | |
| } | |
| } else { | |
| if (pf_reset(pf)) | |
| return -1; | |
| if (pf->lun != -1) | |
| return pf_identify(pf); | |
| for (pf->lun = 0; pf->lun < 8; pf->lun++) | |
| if (!pf_identify(pf)) | |
| return 0; | |
| } | |
| return -1; | |
| } | |
| static int pf_detect(void) | |
| { | |
| struct pf_unit *pf = units; | |
| int k, unit; | |
| printk("%s: %s version %s, major %d, cluster %d, nice %d\n", | |
| name, name, PF_VERSION, major, cluster, nice); | |
| par_drv = pi_register_driver(name); | |
| if (!par_drv) { | |
| pr_err("failed to register %s driver\n", name); | |
| return -1; | |
| } | |
| k = 0; | |
| if (pf_drive_count == 0) { | |
| if (pi_init(pf->pi, 1, -1, -1, -1, -1, -1, pf_scratch, PI_PF, | |
| verbose, pf->name)) { | |
| if (!pf_probe(pf) && pf->disk) { | |
| pf->present = 1; | |
| k++; | |
| } else | |
| pi_release(pf->pi); | |
| } | |
| } else | |
| for (unit = 0; unit < PF_UNITS; unit++, pf++) { | |
| int *conf = *drives[unit]; | |
| if (!conf[D_PRT]) | |
| continue; | |
| if (pi_init(pf->pi, 0, conf[D_PRT], conf[D_MOD], | |
| conf[D_UNI], conf[D_PRO], conf[D_DLY], | |
| pf_scratch, PI_PF, verbose, pf->name)) { | |
| if (pf->disk && !pf_probe(pf)) { | |
| pf->present = 1; | |
| k++; | |
| } else | |
| pi_release(pf->pi); | |
| } | |
| } | |
| if (k) | |
| return 0; | |
| printk("%s: No ATAPI disk detected\n", name); | |
| for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) | |
| put_disk(pf->disk); | |
| pi_unregister_driver(par_drv); | |
| return -1; | |
| } | |
| /* The i/o request engine */ | |
| static int pf_start(struct pf_unit *pf, int cmd, int b, int c) | |
| { | |
| int i; | |
| char io_cmd[12] = { cmd, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; | |
| for (i = 0; i < 4; i++) { | |
| io_cmd[5 - i] = b & 0xff; | |
| b = b >> 8; | |
| } | |
| io_cmd[8] = c & 0xff; | |
| io_cmd[7] = (c >> 8) & 0xff; | |
| i = pf_command(pf, io_cmd, c * 512, "start i/o"); | |
| mdelay(1); | |
| return i; | |
| } | |
| static int pf_ready(void) | |
| { | |
| return (((status_reg(pf_current) & (STAT_BUSY | pf_mask)) == pf_mask)); | |
| } | |
| static struct request_queue *pf_queue; | |
| static void pf_end_request(int err) | |
| { | |
| if (pf_req && !__blk_end_request_cur(pf_req, err)) | |
| pf_req = NULL; | |
| } | |
| static void do_pf_request(struct request_queue * q) | |
| { | |
| if (pf_busy) | |
| return; | |
| repeat: | |
| if (!pf_req) { | |
| pf_req = blk_fetch_request(q); | |
| if (!pf_req) | |
| return; | |
| } | |
| pf_current = pf_req->rq_disk->private_data; | |
| pf_block = blk_rq_pos(pf_req); | |
| pf_run = blk_rq_sectors(pf_req); | |
| pf_count = blk_rq_cur_sectors(pf_req); | |
| if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) { | |
| pf_end_request(-EIO); | |
| goto repeat; | |
| } | |
| pf_cmd = rq_data_dir(pf_req); | |
| pf_buf = bio_data(pf_req->bio); | |
| pf_retries = 0; | |
| pf_busy = 1; | |
| if (pf_cmd == READ) | |
| pi_do_claimed(pf_current->pi, do_pf_read); | |
| else if (pf_cmd == WRITE) | |
| pi_do_claimed(pf_current->pi, do_pf_write); | |
| else { | |
| pf_busy = 0; | |
| pf_end_request(-EIO); | |
| goto repeat; | |
| } | |
| } | |
| static int pf_next_buf(void) | |
| { | |
| unsigned long saved_flags; | |
| pf_count--; | |
| pf_run--; | |
| pf_buf += 512; | |
| pf_block++; | |
| if (!pf_run) | |
| return 1; | |
| if (!pf_count) { | |
| spin_lock_irqsave(&pf_spin_lock, saved_flags); | |
| pf_end_request(0); | |
| spin_unlock_irqrestore(&pf_spin_lock, saved_flags); | |
| if (!pf_req) | |
| return 1; | |
| pf_count = blk_rq_cur_sectors(pf_req); | |
| pf_buf = bio_data(pf_req->bio); | |
| } | |
| return 0; | |
| } | |
| static inline void next_request(int err) | |
| { | |
| unsigned long saved_flags; | |
| spin_lock_irqsave(&pf_spin_lock, saved_flags); | |
| pf_end_request(err); | |
| pf_busy = 0; | |
| do_pf_request(pf_queue); | |
| spin_unlock_irqrestore(&pf_spin_lock, saved_flags); | |
| } | |
| /* detach from the calling context - in case the spinlock is held */ | |
| static void do_pf_read(void) | |
| { | |
| ps_set_intr(do_pf_read_start, NULL, 0, nice); | |
| } | |
| static void do_pf_read_start(void) | |
| { | |
| pf_busy = 1; | |
| if (pf_start(pf_current, ATAPI_READ_10, pf_block, pf_run)) { | |
| pi_disconnect(pf_current->pi); | |
| if (pf_retries < PF_MAX_RETRIES) { | |
| pf_retries++; | |
| pi_do_claimed(pf_current->pi, do_pf_read_start); | |
| return; | |
| } | |
| next_request(-EIO); | |
| return; | |
| } | |
| pf_mask = STAT_DRQ; | |
| ps_set_intr(do_pf_read_drq, pf_ready, PF_TMO, nice); | |
| } | |
| static void do_pf_read_drq(void) | |
| { | |
| while (1) { | |
| if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR, | |
| "read block", "completion") & STAT_ERR) { | |
| pi_disconnect(pf_current->pi); | |
| if (pf_retries < PF_MAX_RETRIES) { | |
| pf_req_sense(pf_current, 0); | |
| pf_retries++; | |
| pi_do_claimed(pf_current->pi, do_pf_read_start); | |
| return; | |
| } | |
| next_request(-EIO); | |
| return; | |
| } | |
| pi_read_block(pf_current->pi, pf_buf, 512); | |
| if (pf_next_buf()) | |
| break; | |
| } | |
| pi_disconnect(pf_current->pi); | |
| next_request(0); | |
| } | |
| static void do_pf_write(void) | |
| { | |
| ps_set_intr(do_pf_write_start, NULL, 0, nice); | |
| } | |
| static void do_pf_write_start(void) | |
| { | |
| pf_busy = 1; | |
| if (pf_start(pf_current, ATAPI_WRITE_10, pf_block, pf_run)) { | |
| pi_disconnect(pf_current->pi); | |
| if (pf_retries < PF_MAX_RETRIES) { | |
| pf_retries++; | |
| pi_do_claimed(pf_current->pi, do_pf_write_start); | |
| return; | |
| } | |
| next_request(-EIO); | |
| return; | |
| } | |
| while (1) { | |
| if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR, | |
| "write block", "data wait") & STAT_ERR) { | |
| pi_disconnect(pf_current->pi); | |
| if (pf_retries < PF_MAX_RETRIES) { | |
| pf_retries++; | |
| pi_do_claimed(pf_current->pi, do_pf_write_start); | |
| return; | |
| } | |
| next_request(-EIO); | |
| return; | |
| } | |
| pi_write_block(pf_current->pi, pf_buf, 512); | |
| if (pf_next_buf()) | |
| break; | |
| } | |
| pf_mask = 0; | |
| ps_set_intr(do_pf_write_done, pf_ready, PF_TMO, nice); | |
| } | |
| static void do_pf_write_done(void) | |
| { | |
| if (pf_wait(pf_current, STAT_BUSY, 0, "write block", "done") & STAT_ERR) { | |
| pi_disconnect(pf_current->pi); | |
| if (pf_retries < PF_MAX_RETRIES) { | |
| pf_retries++; | |
| pi_do_claimed(pf_current->pi, do_pf_write_start); | |
| return; | |
| } | |
| next_request(-EIO); | |
| return; | |
| } | |
| pi_disconnect(pf_current->pi); | |
| next_request(0); | |
| } | |
| static int __init pf_init(void) | |
| { /* preliminary initialisation */ | |
| struct pf_unit *pf; | |
| int unit; | |
| if (disable) | |
| return -EINVAL; | |
| pf_init_units(); | |
| if (pf_detect()) | |
| return -ENODEV; | |
| pf_busy = 0; | |
| if (register_blkdev(major, name)) { | |
| for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) | |
| put_disk(pf->disk); | |
| return -EBUSY; | |
| } | |
| pf_queue = blk_init_queue(do_pf_request, &pf_spin_lock); | |
| if (!pf_queue) { | |
| unregister_blkdev(major, name); | |
| for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) | |
| put_disk(pf->disk); | |
| return -ENOMEM; | |
| } | |
| blk_queue_max_segments(pf_queue, cluster); | |
| for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) { | |
| struct gendisk *disk = pf->disk; | |
| if (!pf->present) | |
| continue; | |
| disk->private_data = pf; | |
| disk->queue = pf_queue; | |
| add_disk(disk); | |
| } | |
| return 0; | |
| } | |
| static void __exit pf_exit(void) | |
| { | |
| struct pf_unit *pf; | |
| int unit; | |
| unregister_blkdev(major, name); | |
| for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) { | |
| if (!pf->present) | |
| continue; | |
| del_gendisk(pf->disk); | |
| put_disk(pf->disk); | |
| pi_release(pf->pi); | |
| } | |
| blk_cleanup_queue(pf_queue); | |
| } | |
| MODULE_LICENSE("GPL"); | |
| module_init(pf_init) | |
| module_exit(pf_exit) |