| /* | |
| * | |
| * A driver for Nokia Connectivity Card DTL-1 devices | |
| * | |
| * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org> | |
| * | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation; | |
| * | |
| * Software distributed under the License is distributed on an "AS | |
| * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | |
| * implied. See the License for the specific language governing | |
| * rights and limitations under the License. | |
| * | |
| * The initial developer of the original code is David A. Hinds | |
| * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
| * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/types.h> | |
| #include <linux/delay.h> | |
| #include <linux/errno.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/ioport.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/string.h> | |
| #include <linux/serial.h> | |
| #include <linux/serial_reg.h> | |
| #include <linux/bitops.h> | |
| #include <asm/io.h> | |
| #include <pcmcia/cistpl.h> | |
| #include <pcmcia/ciscode.h> | |
| #include <pcmcia/ds.h> | |
| #include <pcmcia/cisreg.h> | |
| #include <net/bluetooth/bluetooth.h> | |
| #include <net/bluetooth/hci_core.h> | |
| /* ======================== Module parameters ======================== */ | |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); | |
| MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1"); | |
| MODULE_LICENSE("GPL"); | |
| /* ======================== Local structures ======================== */ | |
| struct dtl1_info { | |
| struct pcmcia_device *p_dev; | |
| struct hci_dev *hdev; | |
| spinlock_t lock; /* For serializing operations */ | |
| unsigned long flowmask; /* HCI flow mask */ | |
| int ri_latch; | |
| struct sk_buff_head txq; | |
| unsigned long tx_state; | |
| unsigned long rx_state; | |
| unsigned long rx_count; | |
| struct sk_buff *rx_skb; | |
| }; | |
| static int dtl1_config(struct pcmcia_device *link); | |
| /* Transmit states */ | |
| #define XMIT_SENDING 1 | |
| #define XMIT_WAKEUP 2 | |
| #define XMIT_WAITING 8 | |
| /* Receiver States */ | |
| #define RECV_WAIT_NSH 0 | |
| #define RECV_WAIT_DATA 1 | |
| struct nsh { | |
| u8 type; | |
| u8 zero; | |
| u16 len; | |
| } __packed; /* Nokia Specific Header */ | |
| #define NSHL 4 /* Nokia Specific Header Length */ | |
| /* ======================== Interrupt handling ======================== */ | |
| static int dtl1_write(unsigned int iobase, int fifo_size, __u8 *buf, int len) | |
| { | |
| int actual = 0; | |
| /* Tx FIFO should be empty */ | |
| if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) | |
| return 0; | |
| /* Fill FIFO with current frame */ | |
| while ((fifo_size-- > 0) && (actual < len)) { | |
| /* Transmit next byte */ | |
| outb(buf[actual], iobase + UART_TX); | |
| actual++; | |
| } | |
| return actual; | |
| } | |
| static void dtl1_write_wakeup(struct dtl1_info *info) | |
| { | |
| if (!info) { | |
| BT_ERR("Unknown device"); | |
| return; | |
| } | |
| if (test_bit(XMIT_WAITING, &(info->tx_state))) { | |
| set_bit(XMIT_WAKEUP, &(info->tx_state)); | |
| return; | |
| } | |
| if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) { | |
| set_bit(XMIT_WAKEUP, &(info->tx_state)); | |
| return; | |
| } | |
| do { | |
| unsigned int iobase = info->p_dev->resource[0]->start; | |
| register struct sk_buff *skb; | |
| int len; | |
| clear_bit(XMIT_WAKEUP, &(info->tx_state)); | |
| if (!pcmcia_dev_present(info->p_dev)) | |
| return; | |
| skb = skb_dequeue(&(info->txq)); | |
| if (!skb) | |
| break; | |
| /* Send frame */ | |
| len = dtl1_write(iobase, 32, skb->data, skb->len); | |
| if (len == skb->len) { | |
| set_bit(XMIT_WAITING, &(info->tx_state)); | |
| kfree_skb(skb); | |
| } else { | |
| skb_pull(skb, len); | |
| skb_queue_head(&(info->txq), skb); | |
| } | |
| info->hdev->stat.byte_tx += len; | |
| } while (test_bit(XMIT_WAKEUP, &(info->tx_state))); | |
| clear_bit(XMIT_SENDING, &(info->tx_state)); | |
| } | |
| static void dtl1_control(struct dtl1_info *info, struct sk_buff *skb) | |
| { | |
| u8 flowmask = *(u8 *)skb->data; | |
| int i; | |
| printk(KERN_INFO "Bluetooth: Nokia control data ="); | |
| for (i = 0; i < skb->len; i++) | |
| printk(" %02x", skb->data[i]); | |
| printk("\n"); | |
| /* transition to active state */ | |
| if (((info->flowmask & 0x07) == 0) && ((flowmask & 0x07) != 0)) { | |
| clear_bit(XMIT_WAITING, &(info->tx_state)); | |
| dtl1_write_wakeup(info); | |
| } | |
| info->flowmask = flowmask; | |
| kfree_skb(skb); | |
| } | |
| static void dtl1_receive(struct dtl1_info *info) | |
| { | |
| unsigned int iobase; | |
| struct nsh *nsh; | |
| int boguscount = 0; | |
| if (!info) { | |
| BT_ERR("Unknown device"); | |
| return; | |
| } | |
| iobase = info->p_dev->resource[0]->start; | |
| do { | |
| info->hdev->stat.byte_rx++; | |
| /* Allocate packet */ | |
| if (info->rx_skb == NULL) { | |
| info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); | |
| if (!info->rx_skb) { | |
| BT_ERR("Can't allocate mem for new packet"); | |
| info->rx_state = RECV_WAIT_NSH; | |
| info->rx_count = NSHL; | |
| return; | |
| } | |
| } | |
| *skb_put(info->rx_skb, 1) = inb(iobase + UART_RX); | |
| nsh = (struct nsh *)info->rx_skb->data; | |
| info->rx_count--; | |
| if (info->rx_count == 0) { | |
| switch (info->rx_state) { | |
| case RECV_WAIT_NSH: | |
| info->rx_state = RECV_WAIT_DATA; | |
| info->rx_count = nsh->len + (nsh->len & 0x0001); | |
| break; | |
| case RECV_WAIT_DATA: | |
| hci_skb_pkt_type(info->rx_skb) = nsh->type; | |
| /* remove PAD byte if it exists */ | |
| if (nsh->len & 0x0001) { | |
| info->rx_skb->tail--; | |
| info->rx_skb->len--; | |
| } | |
| /* remove NSH */ | |
| skb_pull(info->rx_skb, NSHL); | |
| switch (hci_skb_pkt_type(info->rx_skb)) { | |
| case 0x80: | |
| /* control data for the Nokia Card */ | |
| dtl1_control(info, info->rx_skb); | |
| break; | |
| case 0x82: | |
| case 0x83: | |
| case 0x84: | |
| /* send frame to the HCI layer */ | |
| hci_skb_pkt_type(info->rx_skb) &= 0x0f; | |
| hci_recv_frame(info->hdev, info->rx_skb); | |
| break; | |
| default: | |
| /* unknown packet */ | |
| BT_ERR("Unknown HCI packet with type 0x%02x received", | |
| hci_skb_pkt_type(info->rx_skb)); | |
| kfree_skb(info->rx_skb); | |
| break; | |
| } | |
| info->rx_state = RECV_WAIT_NSH; | |
| info->rx_count = NSHL; | |
| info->rx_skb = NULL; | |
| break; | |
| } | |
| } | |
| /* Make sure we don't stay here too long */ | |
| if (boguscount++ > 32) | |
| break; | |
| } while (inb(iobase + UART_LSR) & UART_LSR_DR); | |
| } | |
| static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) | |
| { | |
| struct dtl1_info *info = dev_inst; | |
| unsigned int iobase; | |
| unsigned char msr; | |
| int boguscount = 0; | |
| int iir, lsr; | |
| irqreturn_t r = IRQ_NONE; | |
| if (!info || !info->hdev) | |
| /* our irq handler is shared */ | |
| return IRQ_NONE; | |
| iobase = info->p_dev->resource[0]->start; | |
| spin_lock(&(info->lock)); | |
| iir = inb(iobase + UART_IIR) & UART_IIR_ID; | |
| while (iir) { | |
| r = IRQ_HANDLED; | |
| /* Clear interrupt */ | |
| lsr = inb(iobase + UART_LSR); | |
| switch (iir) { | |
| case UART_IIR_RLSI: | |
| BT_ERR("RLSI"); | |
| break; | |
| case UART_IIR_RDI: | |
| /* Receive interrupt */ | |
| dtl1_receive(info); | |
| break; | |
| case UART_IIR_THRI: | |
| if (lsr & UART_LSR_THRE) { | |
| /* Transmitter ready for data */ | |
| dtl1_write_wakeup(info); | |
| } | |
| break; | |
| default: | |
| BT_ERR("Unhandled IIR=%#x", iir); | |
| break; | |
| } | |
| /* Make sure we don't stay here too long */ | |
| if (boguscount++ > 100) | |
| break; | |
| iir = inb(iobase + UART_IIR) & UART_IIR_ID; | |
| } | |
| msr = inb(iobase + UART_MSR); | |
| if (info->ri_latch ^ (msr & UART_MSR_RI)) { | |
| info->ri_latch = msr & UART_MSR_RI; | |
| clear_bit(XMIT_WAITING, &(info->tx_state)); | |
| dtl1_write_wakeup(info); | |
| r = IRQ_HANDLED; | |
| } | |
| spin_unlock(&(info->lock)); | |
| return r; | |
| } | |
| /* ======================== HCI interface ======================== */ | |
| static int dtl1_hci_open(struct hci_dev *hdev) | |
| { | |
| return 0; | |
| } | |
| static int dtl1_hci_flush(struct hci_dev *hdev) | |
| { | |
| struct dtl1_info *info = hci_get_drvdata(hdev); | |
| /* Drop TX queue */ | |
| skb_queue_purge(&(info->txq)); | |
| return 0; | |
| } | |
| static int dtl1_hci_close(struct hci_dev *hdev) | |
| { | |
| dtl1_hci_flush(hdev); | |
| return 0; | |
| } | |
| static int dtl1_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb) | |
| { | |
| struct dtl1_info *info = hci_get_drvdata(hdev); | |
| struct sk_buff *s; | |
| struct nsh nsh; | |
| switch (hci_skb_pkt_type(skb)) { | |
| case HCI_COMMAND_PKT: | |
| hdev->stat.cmd_tx++; | |
| nsh.type = 0x81; | |
| break; | |
| case HCI_ACLDATA_PKT: | |
| hdev->stat.acl_tx++; | |
| nsh.type = 0x82; | |
| break; | |
| case HCI_SCODATA_PKT: | |
| hdev->stat.sco_tx++; | |
| nsh.type = 0x83; | |
| break; | |
| default: | |
| return -EILSEQ; | |
| } | |
| nsh.zero = 0; | |
| nsh.len = skb->len; | |
| s = bt_skb_alloc(NSHL + skb->len + 1, GFP_ATOMIC); | |
| if (!s) | |
| return -ENOMEM; | |
| skb_reserve(s, NSHL); | |
| skb_copy_from_linear_data(skb, skb_put(s, skb->len), skb->len); | |
| if (skb->len & 0x0001) | |
| *skb_put(s, 1) = 0; /* PAD */ | |
| /* Prepend skb with Nokia frame header and queue */ | |
| memcpy(skb_push(s, NSHL), &nsh, NSHL); | |
| skb_queue_tail(&(info->txq), s); | |
| dtl1_write_wakeup(info); | |
| kfree_skb(skb); | |
| return 0; | |
| } | |
| /* ======================== Card services HCI interaction ======================== */ | |
| static int dtl1_open(struct dtl1_info *info) | |
| { | |
| unsigned long flags; | |
| unsigned int iobase = info->p_dev->resource[0]->start; | |
| struct hci_dev *hdev; | |
| spin_lock_init(&(info->lock)); | |
| skb_queue_head_init(&(info->txq)); | |
| info->rx_state = RECV_WAIT_NSH; | |
| info->rx_count = NSHL; | |
| info->rx_skb = NULL; | |
| set_bit(XMIT_WAITING, &(info->tx_state)); | |
| /* Initialize HCI device */ | |
| hdev = hci_alloc_dev(); | |
| if (!hdev) { | |
| BT_ERR("Can't allocate HCI device"); | |
| return -ENOMEM; | |
| } | |
| info->hdev = hdev; | |
| hdev->bus = HCI_PCCARD; | |
| hci_set_drvdata(hdev, info); | |
| SET_HCIDEV_DEV(hdev, &info->p_dev->dev); | |
| hdev->open = dtl1_hci_open; | |
| hdev->close = dtl1_hci_close; | |
| hdev->flush = dtl1_hci_flush; | |
| hdev->send = dtl1_hci_send_frame; | |
| spin_lock_irqsave(&(info->lock), flags); | |
| /* Reset UART */ | |
| outb(0, iobase + UART_MCR); | |
| /* Turn off interrupts */ | |
| outb(0, iobase + UART_IER); | |
| /* Initialize UART */ | |
| outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */ | |
| outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR); | |
| info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR) | |
| & UART_MSR_RI; | |
| /* Turn on interrupts */ | |
| outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); | |
| spin_unlock_irqrestore(&(info->lock), flags); | |
| /* Timeout before it is safe to send the first HCI packet */ | |
| msleep(2000); | |
| /* Register HCI device */ | |
| if (hci_register_dev(hdev) < 0) { | |
| BT_ERR("Can't register HCI device"); | |
| info->hdev = NULL; | |
| hci_free_dev(hdev); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static int dtl1_close(struct dtl1_info *info) | |
| { | |
| unsigned long flags; | |
| unsigned int iobase = info->p_dev->resource[0]->start; | |
| struct hci_dev *hdev = info->hdev; | |
| if (!hdev) | |
| return -ENODEV; | |
| dtl1_hci_close(hdev); | |
| spin_lock_irqsave(&(info->lock), flags); | |
| /* Reset UART */ | |
| outb(0, iobase + UART_MCR); | |
| /* Turn off interrupts */ | |
| outb(0, iobase + UART_IER); | |
| spin_unlock_irqrestore(&(info->lock), flags); | |
| hci_unregister_dev(hdev); | |
| hci_free_dev(hdev); | |
| return 0; | |
| } | |
| static int dtl1_probe(struct pcmcia_device *link) | |
| { | |
| struct dtl1_info *info; | |
| /* Create new info device */ | |
| info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL); | |
| if (!info) | |
| return -ENOMEM; | |
| info->p_dev = link; | |
| link->priv = info; | |
| link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; | |
| return dtl1_config(link); | |
| } | |
| static void dtl1_detach(struct pcmcia_device *link) | |
| { | |
| struct dtl1_info *info = link->priv; | |
| dtl1_close(info); | |
| pcmcia_disable_device(link); | |
| } | |
| static int dtl1_confcheck(struct pcmcia_device *p_dev, void *priv_data) | |
| { | |
| if ((p_dev->resource[1]->end) || (p_dev->resource[1]->end < 8)) | |
| return -ENODEV; | |
| p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; | |
| p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; | |
| return pcmcia_request_io(p_dev); | |
| } | |
| static int dtl1_config(struct pcmcia_device *link) | |
| { | |
| struct dtl1_info *info = link->priv; | |
| int ret; | |
| /* Look for a generic full-sized window */ | |
| link->resource[0]->end = 8; | |
| ret = pcmcia_loop_config(link, dtl1_confcheck, NULL); | |
| if (ret) | |
| goto failed; | |
| ret = pcmcia_request_irq(link, dtl1_interrupt); | |
| if (ret) | |
| goto failed; | |
| ret = pcmcia_enable_device(link); | |
| if (ret) | |
| goto failed; | |
| ret = dtl1_open(info); | |
| if (ret) | |
| goto failed; | |
| return 0; | |
| failed: | |
| dtl1_detach(link); | |
| return ret; | |
| } | |
| static const struct pcmcia_device_id dtl1_ids[] = { | |
| PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-1", 0xe1bfdd64, 0xe168480d), | |
| PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-4", 0xe1bfdd64, 0x9102bc82), | |
| PCMCIA_DEVICE_PROD_ID12("Socket", "CF", 0xb38bcc2e, 0x44ebf863), | |
| PCMCIA_DEVICE_PROD_ID12("Socket", "CF+ Personal Network Card", 0xb38bcc2e, 0xe732bae3), | |
| PCMCIA_DEVICE_NULL | |
| }; | |
| MODULE_DEVICE_TABLE(pcmcia, dtl1_ids); | |
| static struct pcmcia_driver dtl1_driver = { | |
| .owner = THIS_MODULE, | |
| .name = "dtl1_cs", | |
| .probe = dtl1_probe, | |
| .remove = dtl1_detach, | |
| .id_table = dtl1_ids, | |
| }; | |
| module_pcmcia_driver(dtl1_driver); |