| /* | |
| * | |
| * Bluetooth HCI UART driver for marvell devices | |
| * | |
| * Copyright (C) 2016 Marvell International Ltd. | |
| * Copyright (C) 2016 Intel Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/firmware.h> | |
| #include <linux/module.h> | |
| #include <linux/tty.h> | |
| #include <net/bluetooth/bluetooth.h> | |
| #include <net/bluetooth/hci_core.h> | |
| #include "hci_uart.h" | |
| #define HCI_FW_REQ_PKT 0xA5 | |
| #define HCI_CHIP_VER_PKT 0xAA | |
| #define MRVL_ACK 0x5A | |
| #define MRVL_NAK 0xBF | |
| #define MRVL_RAW_DATA 0x1F | |
| enum { | |
| STATE_CHIP_VER_PENDING, | |
| STATE_FW_REQ_PENDING, | |
| }; | |
| struct mrvl_data { | |
| struct sk_buff *rx_skb; | |
| struct sk_buff_head txq; | |
| struct sk_buff_head rawq; | |
| unsigned long flags; | |
| unsigned int tx_len; | |
| u8 id, rev; | |
| }; | |
| struct hci_mrvl_pkt { | |
| __le16 lhs; | |
| __le16 rhs; | |
| } __packed; | |
| #define HCI_MRVL_PKT_SIZE 4 | |
| static int mrvl_open(struct hci_uart *hu) | |
| { | |
| struct mrvl_data *mrvl; | |
| BT_DBG("hu %p", hu); | |
| mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL); | |
| if (!mrvl) | |
| return -ENOMEM; | |
| skb_queue_head_init(&mrvl->txq); | |
| skb_queue_head_init(&mrvl->rawq); | |
| set_bit(STATE_CHIP_VER_PENDING, &mrvl->flags); | |
| hu->priv = mrvl; | |
| return 0; | |
| } | |
| static int mrvl_close(struct hci_uart *hu) | |
| { | |
| struct mrvl_data *mrvl = hu->priv; | |
| BT_DBG("hu %p", hu); | |
| skb_queue_purge(&mrvl->txq); | |
| skb_queue_purge(&mrvl->rawq); | |
| kfree_skb(mrvl->rx_skb); | |
| kfree(mrvl); | |
| hu->priv = NULL; | |
| return 0; | |
| } | |
| static int mrvl_flush(struct hci_uart *hu) | |
| { | |
| struct mrvl_data *mrvl = hu->priv; | |
| BT_DBG("hu %p", hu); | |
| skb_queue_purge(&mrvl->txq); | |
| skb_queue_purge(&mrvl->rawq); | |
| return 0; | |
| } | |
| static struct sk_buff *mrvl_dequeue(struct hci_uart *hu) | |
| { | |
| struct mrvl_data *mrvl = hu->priv; | |
| struct sk_buff *skb; | |
| skb = skb_dequeue(&mrvl->txq); | |
| if (!skb) { | |
| /* Any raw data ? */ | |
| skb = skb_dequeue(&mrvl->rawq); | |
| } else { | |
| /* Prepend skb with frame type */ | |
| memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); | |
| } | |
| return skb; | |
| } | |
| static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb) | |
| { | |
| struct mrvl_data *mrvl = hu->priv; | |
| skb_queue_tail(&mrvl->txq, skb); | |
| return 0; | |
| } | |
| static void mrvl_send_ack(struct hci_uart *hu, unsigned char type) | |
| { | |
| struct mrvl_data *mrvl = hu->priv; | |
| struct sk_buff *skb; | |
| /* No H4 payload, only 1 byte header */ | |
| skb = bt_skb_alloc(0, GFP_ATOMIC); | |
| if (!skb) { | |
| bt_dev_err(hu->hdev, "Unable to alloc ack/nak packet"); | |
| return; | |
| } | |
| hci_skb_pkt_type(skb) = type; | |
| skb_queue_tail(&mrvl->txq, skb); | |
| hci_uart_tx_wakeup(hu); | |
| } | |
| static int mrvl_recv_fw_req(struct hci_dev *hdev, struct sk_buff *skb) | |
| { | |
| struct hci_mrvl_pkt *pkt = (void *)skb->data; | |
| struct hci_uart *hu = hci_get_drvdata(hdev); | |
| struct mrvl_data *mrvl = hu->priv; | |
| int ret = 0; | |
| if ((pkt->lhs ^ pkt->rhs) != 0xffff) { | |
| bt_dev_err(hdev, "Corrupted mrvl header"); | |
| mrvl_send_ack(hu, MRVL_NAK); | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| mrvl_send_ack(hu, MRVL_ACK); | |
| if (!test_bit(STATE_FW_REQ_PENDING, &mrvl->flags)) { | |
| bt_dev_err(hdev, "Received unexpected firmware request"); | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| mrvl->tx_len = le16_to_cpu(pkt->lhs); | |
| clear_bit(STATE_FW_REQ_PENDING, &mrvl->flags); | |
| smp_mb__after_atomic(); | |
| wake_up_bit(&mrvl->flags, STATE_FW_REQ_PENDING); | |
| done: | |
| kfree_skb(skb); | |
| return ret; | |
| } | |
| static int mrvl_recv_chip_ver(struct hci_dev *hdev, struct sk_buff *skb) | |
| { | |
| struct hci_mrvl_pkt *pkt = (void *)skb->data; | |
| struct hci_uart *hu = hci_get_drvdata(hdev); | |
| struct mrvl_data *mrvl = hu->priv; | |
| u16 version = le16_to_cpu(pkt->lhs); | |
| int ret = 0; | |
| if ((pkt->lhs ^ pkt->rhs) != 0xffff) { | |
| bt_dev_err(hdev, "Corrupted mrvl header"); | |
| mrvl_send_ack(hu, MRVL_NAK); | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| mrvl_send_ack(hu, MRVL_ACK); | |
| if (!test_bit(STATE_CHIP_VER_PENDING, &mrvl->flags)) { | |
| bt_dev_err(hdev, "Received unexpected chip version"); | |
| goto done; | |
| } | |
| mrvl->id = version; | |
| mrvl->rev = version >> 8; | |
| bt_dev_info(hdev, "Controller id = %x, rev = %x", mrvl->id, mrvl->rev); | |
| clear_bit(STATE_CHIP_VER_PENDING, &mrvl->flags); | |
| smp_mb__after_atomic(); | |
| wake_up_bit(&mrvl->flags, STATE_CHIP_VER_PENDING); | |
| done: | |
| kfree_skb(skb); | |
| return ret; | |
| } | |
| #define HCI_RECV_CHIP_VER \ | |
| .type = HCI_CHIP_VER_PKT, \ | |
| .hlen = HCI_MRVL_PKT_SIZE, \ | |
| .loff = 0, \ | |
| .lsize = 0, \ | |
| .maxlen = HCI_MRVL_PKT_SIZE | |
| #define HCI_RECV_FW_REQ \ | |
| .type = HCI_FW_REQ_PKT, \ | |
| .hlen = HCI_MRVL_PKT_SIZE, \ | |
| .loff = 0, \ | |
| .lsize = 0, \ | |
| .maxlen = HCI_MRVL_PKT_SIZE | |
| static const struct h4_recv_pkt mrvl_recv_pkts[] = { | |
| { H4_RECV_ACL, .recv = hci_recv_frame }, | |
| { H4_RECV_SCO, .recv = hci_recv_frame }, | |
| { H4_RECV_EVENT, .recv = hci_recv_frame }, | |
| { HCI_RECV_FW_REQ, .recv = mrvl_recv_fw_req }, | |
| { HCI_RECV_CHIP_VER, .recv = mrvl_recv_chip_ver }, | |
| }; | |
| static int mrvl_recv(struct hci_uart *hu, const void *data, int count) | |
| { | |
| struct mrvl_data *mrvl = hu->priv; | |
| if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) | |
| return -EUNATCH; | |
| mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count, | |
| mrvl_recv_pkts, | |
| ARRAY_SIZE(mrvl_recv_pkts)); | |
| if (IS_ERR(mrvl->rx_skb)) { | |
| int err = PTR_ERR(mrvl->rx_skb); | |
| bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err); | |
| mrvl->rx_skb = NULL; | |
| return err; | |
| } | |
| return count; | |
| } | |
| static int mrvl_load_firmware(struct hci_dev *hdev, const char *name) | |
| { | |
| struct hci_uart *hu = hci_get_drvdata(hdev); | |
| struct mrvl_data *mrvl = hu->priv; | |
| const struct firmware *fw = NULL; | |
| const u8 *fw_ptr, *fw_max; | |
| int err; | |
| err = request_firmware(&fw, name, &hdev->dev); | |
| if (err < 0) { | |
| bt_dev_err(hdev, "Failed to load firmware file %s", name); | |
| return err; | |
| } | |
| fw_ptr = fw->data; | |
| fw_max = fw->data + fw->size; | |
| bt_dev_info(hdev, "Loading %s", name); | |
| set_bit(STATE_FW_REQ_PENDING, &mrvl->flags); | |
| while (fw_ptr <= fw_max) { | |
| struct sk_buff *skb; | |
| /* Controller drives the firmware load by sending firmware | |
| * request packets containing the expected fragment size. | |
| */ | |
| err = wait_on_bit_timeout(&mrvl->flags, STATE_FW_REQ_PENDING, | |
| TASK_INTERRUPTIBLE, | |
| msecs_to_jiffies(2000)); | |
| if (err == 1) { | |
| bt_dev_err(hdev, "Firmware load interrupted"); | |
| err = -EINTR; | |
| break; | |
| } else if (err) { | |
| bt_dev_err(hdev, "Firmware request timeout"); | |
| err = -ETIMEDOUT; | |
| break; | |
| } | |
| bt_dev_dbg(hdev, "Firmware request, expecting %d bytes", | |
| mrvl->tx_len); | |
| if (fw_ptr == fw_max) { | |
| /* Controller requests a null size once firmware is | |
| * fully loaded. If controller expects more data, there | |
| * is an issue. | |
| */ | |
| if (!mrvl->tx_len) { | |
| bt_dev_info(hdev, "Firmware loading complete"); | |
| } else { | |
| bt_dev_err(hdev, "Firmware loading failure"); | |
| err = -EINVAL; | |
| } | |
| break; | |
| } | |
| if (fw_ptr + mrvl->tx_len > fw_max) { | |
| mrvl->tx_len = fw_max - fw_ptr; | |
| bt_dev_dbg(hdev, "Adjusting tx_len to %d", | |
| mrvl->tx_len); | |
| } | |
| skb = bt_skb_alloc(mrvl->tx_len, GFP_KERNEL); | |
| if (!skb) { | |
| bt_dev_err(hdev, "Failed to alloc mem for FW packet"); | |
| err = -ENOMEM; | |
| break; | |
| } | |
| bt_cb(skb)->pkt_type = MRVL_RAW_DATA; | |
| memcpy(skb_put(skb, mrvl->tx_len), fw_ptr, mrvl->tx_len); | |
| fw_ptr += mrvl->tx_len; | |
| set_bit(STATE_FW_REQ_PENDING, &mrvl->flags); | |
| skb_queue_tail(&mrvl->rawq, skb); | |
| hci_uart_tx_wakeup(hu); | |
| } | |
| release_firmware(fw); | |
| return err; | |
| } | |
| static int mrvl_setup(struct hci_uart *hu) | |
| { | |
| int err; | |
| hci_uart_set_flow_control(hu, true); | |
| err = mrvl_load_firmware(hu->hdev, "mrvl/helper_uart_3000000.bin"); | |
| if (err) { | |
| bt_dev_err(hu->hdev, "Unable to download firmware helper"); | |
| return -EINVAL; | |
| } | |
| hci_uart_set_baudrate(hu, 3000000); | |
| hci_uart_set_flow_control(hu, false); | |
| err = mrvl_load_firmware(hu->hdev, "mrvl/uart8897_bt.bin"); | |
| if (err) | |
| return err; | |
| return 0; | |
| } | |
| static const struct hci_uart_proto mrvl_proto = { | |
| .id = HCI_UART_MRVL, | |
| .name = "Marvell", | |
| .init_speed = 115200, | |
| .open = mrvl_open, | |
| .close = mrvl_close, | |
| .flush = mrvl_flush, | |
| .setup = mrvl_setup, | |
| .recv = mrvl_recv, | |
| .enqueue = mrvl_enqueue, | |
| .dequeue = mrvl_dequeue, | |
| }; | |
| int __init mrvl_init(void) | |
| { | |
| return hci_uart_register_proto(&mrvl_proto); | |
| } | |
| int __exit mrvl_deinit(void) | |
| { | |
| return hci_uart_unregister_proto(&mrvl_proto); | |
| } |