| /* | |
| * RNG driver for VIA RNGs | |
| * | |
| * Copyright 2005 (c) MontaVista Software, Inc. | |
| * | |
| * with the majority of the code coming from: | |
| * | |
| * Hardware driver for the Intel/AMD/VIA Random Number Generators (RNG) | |
| * (c) Copyright 2003 Red Hat Inc <jgarzik@redhat.com> | |
| * | |
| * derived from | |
| * | |
| * Hardware driver for the AMD 768 Random Number Generator (RNG) | |
| * (c) Copyright 2001 Red Hat Inc | |
| * | |
| * derived from | |
| * | |
| * Hardware driver for Intel i810 Random Number Generator (RNG) | |
| * Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com> | |
| * Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com> | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <crypto/padlock.h> | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/hw_random.h> | |
| #include <linux/delay.h> | |
| #include <asm/cpu_device_id.h> | |
| #include <asm/io.h> | |
| #include <asm/msr.h> | |
| #include <asm/cpufeature.h> | |
| #include <asm/fpu/api.h> | |
| enum { | |
| VIA_STRFILT_CNT_SHIFT = 16, | |
| VIA_STRFILT_FAIL = (1 << 15), | |
| VIA_STRFILT_ENABLE = (1 << 14), | |
| VIA_RAWBITS_ENABLE = (1 << 13), | |
| VIA_RNG_ENABLE = (1 << 6), | |
| VIA_NOISESRC1 = (1 << 8), | |
| VIA_NOISESRC2 = (1 << 9), | |
| VIA_XSTORE_CNT_MASK = 0x0F, | |
| VIA_RNG_CHUNK_8 = 0x00, /* 64 rand bits, 64 stored bits */ | |
| VIA_RNG_CHUNK_4 = 0x01, /* 32 rand bits, 32 stored bits */ | |
| VIA_RNG_CHUNK_4_MASK = 0xFFFFFFFF, | |
| VIA_RNG_CHUNK_2 = 0x02, /* 16 rand bits, 32 stored bits */ | |
| VIA_RNG_CHUNK_2_MASK = 0xFFFF, | |
| VIA_RNG_CHUNK_1 = 0x03, /* 8 rand bits, 32 stored bits */ | |
| VIA_RNG_CHUNK_1_MASK = 0xFF, | |
| }; | |
| /* | |
| * Investigate using the 'rep' prefix to obtain 32 bits of random data | |
| * in one insn. The upside is potentially better performance. The | |
| * downside is that the instruction becomes no longer atomic. Due to | |
| * this, just like familiar issues with /dev/random itself, the worst | |
| * case of a 'rep xstore' could potentially pause a cpu for an | |
| * unreasonably long time. In practice, this condition would likely | |
| * only occur when the hardware is failing. (or so we hope :)) | |
| * | |
| * Another possible performance boost may come from simply buffering | |
| * until we have 4 bytes, thus returning a u32 at a time, | |
| * instead of the current u8-at-a-time. | |
| * | |
| * Padlock instructions can generate a spurious DNA fault, so | |
| * we have to call them in the context of irq_ts_save/restore() | |
| */ | |
| static inline u32 xstore(u32 *addr, u32 edx_in) | |
| { | |
| u32 eax_out; | |
| int ts_state; | |
| ts_state = irq_ts_save(); | |
| asm(".byte 0x0F,0xA7,0xC0 /* xstore %%edi (addr=%0) */" | |
| : "=m" (*addr), "=a" (eax_out), "+d" (edx_in), "+D" (addr)); | |
| irq_ts_restore(ts_state); | |
| return eax_out; | |
| } | |
| static int via_rng_data_present(struct hwrng *rng, int wait) | |
| { | |
| char buf[16 + PADLOCK_ALIGNMENT - STACK_ALIGN] __attribute__ | |
| ((aligned(STACK_ALIGN))); | |
| u32 *via_rng_datum = (u32 *)PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT); | |
| u32 bytes_out; | |
| int i; | |
| /* We choose the recommended 1-byte-per-instruction RNG rate, | |
| * for greater randomness at the expense of speed. Larger | |
| * values 2, 4, or 8 bytes-per-instruction yield greater | |
| * speed at lesser randomness. | |
| * | |
| * If you change this to another VIA_CHUNK_n, you must also | |
| * change the ->n_bytes values in rng_vendor_ops[] tables. | |
| * VIA_CHUNK_8 requires further code changes. | |
| * | |
| * A copy of MSR_VIA_RNG is placed in eax_out when xstore | |
| * completes. | |
| */ | |
| for (i = 0; i < 20; i++) { | |
| *via_rng_datum = 0; /* paranoia, not really necessary */ | |
| bytes_out = xstore(via_rng_datum, VIA_RNG_CHUNK_1); | |
| bytes_out &= VIA_XSTORE_CNT_MASK; | |
| if (bytes_out || !wait) | |
| break; | |
| udelay(10); | |
| } | |
| rng->priv = *via_rng_datum; | |
| return bytes_out ? 1 : 0; | |
| } | |
| static int via_rng_data_read(struct hwrng *rng, u32 *data) | |
| { | |
| u32 via_rng_datum = (u32)rng->priv; | |
| *data = via_rng_datum; | |
| return 1; | |
| } | |
| static int via_rng_init(struct hwrng *rng) | |
| { | |
| struct cpuinfo_x86 *c = &cpu_data(0); | |
| u32 lo, hi, old_lo; | |
| /* VIA Nano CPUs don't have the MSR_VIA_RNG anymore. The RNG | |
| * is always enabled if CPUID rng_en is set. There is no | |
| * RNG configuration like it used to be the case in this | |
| * register */ | |
| if ((c->x86 == 6) && (c->x86_model >= 0x0f)) { | |
| if (!boot_cpu_has(X86_FEATURE_XSTORE_EN)) { | |
| pr_err(PFX "can't enable hardware RNG " | |
| "if XSTORE is not enabled\n"); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| /* Control the RNG via MSR. Tread lightly and pay very close | |
| * close attention to values written, as the reserved fields | |
| * are documented to be "undefined and unpredictable"; but it | |
| * does not say to write them as zero, so I make a guess that | |
| * we restore the values we find in the register. | |
| */ | |
| rdmsr(MSR_VIA_RNG, lo, hi); | |
| old_lo = lo; | |
| lo &= ~(0x7f << VIA_STRFILT_CNT_SHIFT); | |
| lo &= ~VIA_XSTORE_CNT_MASK; | |
| lo &= ~(VIA_STRFILT_ENABLE | VIA_STRFILT_FAIL | VIA_RAWBITS_ENABLE); | |
| lo |= VIA_RNG_ENABLE; | |
| lo |= VIA_NOISESRC1; | |
| /* Enable secondary noise source on CPUs where it is present. */ | |
| /* Nehemiah stepping 8 and higher */ | |
| if ((c->x86_model == 9) && (c->x86_mask > 7)) | |
| lo |= VIA_NOISESRC2; | |
| /* Esther */ | |
| if (c->x86_model >= 10) | |
| lo |= VIA_NOISESRC2; | |
| if (lo != old_lo) | |
| wrmsr(MSR_VIA_RNG, lo, hi); | |
| /* perhaps-unnecessary sanity check; remove after testing if | |
| unneeded */ | |
| rdmsr(MSR_VIA_RNG, lo, hi); | |
| if ((lo & VIA_RNG_ENABLE) == 0) { | |
| pr_err(PFX "cannot enable VIA C3 RNG, aborting\n"); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static struct hwrng via_rng = { | |
| .name = "via", | |
| .init = via_rng_init, | |
| .data_present = via_rng_data_present, | |
| .data_read = via_rng_data_read, | |
| }; | |
| static int __init mod_init(void) | |
| { | |
| int err; | |
| if (!boot_cpu_has(X86_FEATURE_XSTORE)) | |
| return -ENODEV; | |
| pr_info("VIA RNG detected\n"); | |
| err = hwrng_register(&via_rng); | |
| if (err) { | |
| pr_err(PFX "RNG registering failed (%d)\n", | |
| err); | |
| goto out; | |
| } | |
| out: | |
| return err; | |
| } | |
| static void __exit mod_exit(void) | |
| { | |
| hwrng_unregister(&via_rng); | |
| } | |
| module_init(mod_init); | |
| module_exit(mod_exit); | |
| static struct x86_cpu_id __maybe_unused via_rng_cpu_id[] = { | |
| X86_FEATURE_MATCH(X86_FEATURE_XSTORE), | |
| {} | |
| }; | |
| MODULE_DESCRIPTION("H/W RNG driver for VIA CPU with PadLock"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DEVICE_TABLE(x86cpu, via_rng_cpu_id); |