| /* | |
| * | |
| * mwavedd.c -- mwave device driver | |
| * | |
| * | |
| * Written By: Mike Sullivan IBM Corporation | |
| * | |
| * Copyright (C) 1999 IBM Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * NO WARRANTY | |
| * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
| * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
| * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
| * solely responsible for determining the appropriateness of using and | |
| * distributing the Program and assumes all risks associated with its | |
| * exercise of rights under this Agreement, including but not limited to | |
| * the risks and costs of program errors, damage to or loss of data, | |
| * programs or equipment, and unavailability or interruption of operations. | |
| * | |
| * DISCLAIMER OF LIABILITY | |
| * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
| * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
| * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| * | |
| * 10/23/2000 - Alpha Release | |
| * First release to the public | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/fs.h> | |
| #include <linux/init.h> | |
| #include <linux/major.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/device.h> | |
| #include <linux/serial.h> | |
| #include <linux/sched.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/mutex.h> | |
| #include <linux/delay.h> | |
| #include <linux/serial_8250.h> | |
| #include "smapi.h" | |
| #include "mwavedd.h" | |
| #include "3780i.h" | |
| #include "tp3780i.h" | |
| MODULE_DESCRIPTION("3780i Advanced Communications Processor (Mwave) driver"); | |
| MODULE_AUTHOR("Mike Sullivan and Paul Schroeder"); | |
| MODULE_LICENSE("GPL"); | |
| /* | |
| * These parameters support the setting of MWave resources. Note that no | |
| * checks are made against other devices (ie. superio) for conflicts. | |
| * We'll depend on users using the tpctl utility to do that for now | |
| */ | |
| static DEFINE_MUTEX(mwave_mutex); | |
| int mwave_debug = 0; | |
| int mwave_3780i_irq = 0; | |
| int mwave_3780i_io = 0; | |
| int mwave_uart_irq = 0; | |
| int mwave_uart_io = 0; | |
| module_param(mwave_debug, int, 0); | |
| module_param(mwave_3780i_irq, int, 0); | |
| module_param(mwave_3780i_io, int, 0); | |
| module_param(mwave_uart_irq, int, 0); | |
| module_param(mwave_uart_io, int, 0); | |
| static int mwave_open(struct inode *inode, struct file *file); | |
| static int mwave_close(struct inode *inode, struct file *file); | |
| static long mwave_ioctl(struct file *filp, unsigned int iocmd, | |
| unsigned long ioarg); | |
| MWAVE_DEVICE_DATA mwave_s_mdd; | |
| static int mwave_open(struct inode *inode, struct file *file) | |
| { | |
| unsigned int retval = 0; | |
| PRINTK_3(TRACE_MWAVE, | |
| "mwavedd::mwave_open, entry inode %p file %p\n", | |
| inode, file); | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_open, exit return retval %x\n", retval); | |
| return retval; | |
| } | |
| static int mwave_close(struct inode *inode, struct file *file) | |
| { | |
| unsigned int retval = 0; | |
| PRINTK_3(TRACE_MWAVE, | |
| "mwavedd::mwave_close, entry inode %p file %p\n", | |
| inode, file); | |
| PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_close, exit retval %x\n", | |
| retval); | |
| return retval; | |
| } | |
| static long mwave_ioctl(struct file *file, unsigned int iocmd, | |
| unsigned long ioarg) | |
| { | |
| unsigned int retval = 0; | |
| pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; | |
| void __user *arg = (void __user *)ioarg; | |
| PRINTK_4(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl, entry file %p cmd %x arg %x\n", | |
| file, iocmd, (int) ioarg); | |
| switch (iocmd) { | |
| case IOCTL_MW_RESET: | |
| PRINTK_1(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl, IOCTL_MW_RESET" | |
| " calling tp3780I_ResetDSP\n"); | |
| mutex_lock(&mwave_mutex); | |
| retval = tp3780I_ResetDSP(&pDrvData->rBDData); | |
| mutex_unlock(&mwave_mutex); | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl, IOCTL_MW_RESET" | |
| " retval %x from tp3780I_ResetDSP\n", | |
| retval); | |
| break; | |
| case IOCTL_MW_RUN: | |
| PRINTK_1(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl, IOCTL_MW_RUN" | |
| " calling tp3780I_StartDSP\n"); | |
| mutex_lock(&mwave_mutex); | |
| retval = tp3780I_StartDSP(&pDrvData->rBDData); | |
| mutex_unlock(&mwave_mutex); | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl, IOCTL_MW_RUN" | |
| " retval %x from tp3780I_StartDSP\n", | |
| retval); | |
| break; | |
| case IOCTL_MW_DSP_ABILITIES: { | |
| MW_ABILITIES rAbilities; | |
| PRINTK_1(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl," | |
| " IOCTL_MW_DSP_ABILITIES calling" | |
| " tp3780I_QueryAbilities\n"); | |
| mutex_lock(&mwave_mutex); | |
| retval = tp3780I_QueryAbilities(&pDrvData->rBDData, | |
| &rAbilities); | |
| mutex_unlock(&mwave_mutex); | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES" | |
| " retval %x from tp3780I_QueryAbilities\n", | |
| retval); | |
| if (retval == 0) { | |
| if( copy_to_user(arg, &rAbilities, | |
| sizeof(MW_ABILITIES)) ) | |
| return -EFAULT; | |
| } | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES" | |
| " exit retval %x\n", | |
| retval); | |
| } | |
| break; | |
| case IOCTL_MW_READ_DATA: | |
| case IOCTL_MW_READCLEAR_DATA: { | |
| MW_READWRITE rReadData; | |
| unsigned short __user *pusBuffer = NULL; | |
| if( copy_from_user(&rReadData, arg, | |
| sizeof(MW_READWRITE)) ) | |
| return -EFAULT; | |
| pusBuffer = (unsigned short __user *) (rReadData.pBuf); | |
| PRINTK_4(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl IOCTL_MW_READ_DATA," | |
| " size %lx, ioarg %lx pusBuffer %p\n", | |
| rReadData.ulDataLength, ioarg, pusBuffer); | |
| mutex_lock(&mwave_mutex); | |
| retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, | |
| iocmd, | |
| pusBuffer, | |
| rReadData.ulDataLength, | |
| rReadData.usDspAddress); | |
| mutex_unlock(&mwave_mutex); | |
| } | |
| break; | |
| case IOCTL_MW_READ_INST: { | |
| MW_READWRITE rReadData; | |
| unsigned short __user *pusBuffer = NULL; | |
| if( copy_from_user(&rReadData, arg, | |
| sizeof(MW_READWRITE)) ) | |
| return -EFAULT; | |
| pusBuffer = (unsigned short __user *) (rReadData.pBuf); | |
| PRINTK_4(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl IOCTL_MW_READ_INST," | |
| " size %lx, ioarg %lx pusBuffer %p\n", | |
| rReadData.ulDataLength / 2, ioarg, | |
| pusBuffer); | |
| mutex_lock(&mwave_mutex); | |
| retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, | |
| iocmd, pusBuffer, | |
| rReadData.ulDataLength / 2, | |
| rReadData.usDspAddress); | |
| mutex_unlock(&mwave_mutex); | |
| } | |
| break; | |
| case IOCTL_MW_WRITE_DATA: { | |
| MW_READWRITE rWriteData; | |
| unsigned short __user *pusBuffer = NULL; | |
| if( copy_from_user(&rWriteData, arg, | |
| sizeof(MW_READWRITE)) ) | |
| return -EFAULT; | |
| pusBuffer = (unsigned short __user *) (rWriteData.pBuf); | |
| PRINTK_4(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl IOCTL_MW_WRITE_DATA," | |
| " size %lx, ioarg %lx pusBuffer %p\n", | |
| rWriteData.ulDataLength, ioarg, | |
| pusBuffer); | |
| mutex_lock(&mwave_mutex); | |
| retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, | |
| iocmd, pusBuffer, | |
| rWriteData.ulDataLength, | |
| rWriteData.usDspAddress); | |
| mutex_unlock(&mwave_mutex); | |
| } | |
| break; | |
| case IOCTL_MW_WRITE_INST: { | |
| MW_READWRITE rWriteData; | |
| unsigned short __user *pusBuffer = NULL; | |
| if( copy_from_user(&rWriteData, arg, | |
| sizeof(MW_READWRITE)) ) | |
| return -EFAULT; | |
| pusBuffer = (unsigned short __user *)(rWriteData.pBuf); | |
| PRINTK_4(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl IOCTL_MW_WRITE_INST," | |
| " size %lx, ioarg %lx pusBuffer %p\n", | |
| rWriteData.ulDataLength, ioarg, | |
| pusBuffer); | |
| mutex_lock(&mwave_mutex); | |
| retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData, | |
| iocmd, pusBuffer, | |
| rWriteData.ulDataLength, | |
| rWriteData.usDspAddress); | |
| mutex_unlock(&mwave_mutex); | |
| } | |
| break; | |
| case IOCTL_MW_REGISTER_IPC: { | |
| unsigned int ipcnum = (unsigned int) ioarg; | |
| if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd::mwave_ioctl:" | |
| " IOCTL_MW_REGISTER_IPC:" | |
| " Error: Invalid ipcnum %x\n", | |
| ipcnum); | |
| return -EINVAL; | |
| } | |
| PRINTK_3(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC" | |
| " ipcnum %x entry usIntCount %x\n", | |
| ipcnum, | |
| pDrvData->IPCs[ipcnum].usIntCount); | |
| mutex_lock(&mwave_mutex); | |
| pDrvData->IPCs[ipcnum].bIsHere = false; | |
| pDrvData->IPCs[ipcnum].bIsEnabled = true; | |
| mutex_unlock(&mwave_mutex); | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC" | |
| " ipcnum %x exit\n", | |
| ipcnum); | |
| } | |
| break; | |
| case IOCTL_MW_GET_IPC: { | |
| unsigned int ipcnum = (unsigned int) ioarg; | |
| if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd::mwave_ioctl:" | |
| " IOCTL_MW_GET_IPC: Error:" | |
| " Invalid ipcnum %x\n", ipcnum); | |
| return -EINVAL; | |
| } | |
| PRINTK_3(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC" | |
| " ipcnum %x, usIntCount %x\n", | |
| ipcnum, | |
| pDrvData->IPCs[ipcnum].usIntCount); | |
| mutex_lock(&mwave_mutex); | |
| if (pDrvData->IPCs[ipcnum].bIsEnabled == true) { | |
| DECLARE_WAITQUEUE(wait, current); | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl, thread for" | |
| " ipc %x going to sleep\n", | |
| ipcnum); | |
| add_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait); | |
| pDrvData->IPCs[ipcnum].bIsHere = true; | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| /* check whether an event was signalled by */ | |
| /* the interrupt handler while we were gone */ | |
| if (pDrvData->IPCs[ipcnum].usIntCount == 1) { /* first int has occurred (race condition) */ | |
| pDrvData->IPCs[ipcnum].usIntCount = 2; /* first int has been handled */ | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl" | |
| " IOCTL_MW_GET_IPC ipcnum %x" | |
| " handling first int\n", | |
| ipcnum); | |
| } else { /* either 1st int has not yet occurred, or we have already handled the first int */ | |
| schedule(); | |
| if (pDrvData->IPCs[ipcnum].usIntCount == 1) { | |
| pDrvData->IPCs[ipcnum].usIntCount = 2; | |
| } | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl" | |
| " IOCTL_MW_GET_IPC ipcnum %x" | |
| " woke up and returning to" | |
| " application\n", | |
| ipcnum); | |
| } | |
| pDrvData->IPCs[ipcnum].bIsHere = false; | |
| remove_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait); | |
| set_current_state(TASK_RUNNING); | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC," | |
| " returning thread for ipc %x" | |
| " processing\n", | |
| ipcnum); | |
| } | |
| mutex_unlock(&mwave_mutex); | |
| } | |
| break; | |
| case IOCTL_MW_UNREGISTER_IPC: { | |
| unsigned int ipcnum = (unsigned int) ioarg; | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_ioctl IOCTL_MW_UNREGISTER_IPC" | |
| " ipcnum %x\n", | |
| ipcnum); | |
| if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd::mwave_ioctl:" | |
| " IOCTL_MW_UNREGISTER_IPC:" | |
| " Error: Invalid ipcnum %x\n", | |
| ipcnum); | |
| return -EINVAL; | |
| } | |
| mutex_lock(&mwave_mutex); | |
| if (pDrvData->IPCs[ipcnum].bIsEnabled == true) { | |
| pDrvData->IPCs[ipcnum].bIsEnabled = false; | |
| if (pDrvData->IPCs[ipcnum].bIsHere == true) { | |
| wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue); | |
| } | |
| } | |
| mutex_unlock(&mwave_mutex); | |
| } | |
| break; | |
| default: | |
| return -ENOTTY; | |
| break; | |
| } /* switch */ | |
| PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, exit retval %x\n", retval); | |
| return retval; | |
| } | |
| static ssize_t mwave_read(struct file *file, char __user *buf, size_t count, | |
| loff_t * ppos) | |
| { | |
| PRINTK_5(TRACE_MWAVE, | |
| "mwavedd::mwave_read entry file %p, buf %p, count %zx ppos %p\n", | |
| file, buf, count, ppos); | |
| return -EINVAL; | |
| } | |
| static ssize_t mwave_write(struct file *file, const char __user *buf, | |
| size_t count, loff_t * ppos) | |
| { | |
| PRINTK_5(TRACE_MWAVE, | |
| "mwavedd::mwave_write entry file %p, buf %p," | |
| " count %zx ppos %p\n", | |
| file, buf, count, ppos); | |
| return -EINVAL; | |
| } | |
| static int register_serial_portandirq(unsigned int port, int irq) | |
| { | |
| struct uart_8250_port uart; | |
| switch ( port ) { | |
| case 0x3f8: | |
| case 0x2f8: | |
| case 0x3e8: | |
| case 0x2e8: | |
| /* OK */ | |
| break; | |
| default: | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd::register_serial_portandirq:" | |
| " Error: Illegal port %x\n", port ); | |
| return -1; | |
| } /* switch */ | |
| /* port is okay */ | |
| switch ( irq ) { | |
| case 3: | |
| case 4: | |
| case 5: | |
| case 7: | |
| /* OK */ | |
| break; | |
| default: | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd::register_serial_portandirq:" | |
| " Error: Illegal irq %x\n", irq ); | |
| return -1; | |
| } /* switch */ | |
| /* irq is okay */ | |
| memset(&uart, 0, sizeof(uart)); | |
| uart.port.uartclk = 1843200; | |
| uart.port.iobase = port; | |
| uart.port.irq = irq; | |
| uart.port.iotype = UPIO_PORT; | |
| uart.port.flags = UPF_SHARE_IRQ; | |
| return serial8250_register_8250_port(&uart); | |
| } | |
| static const struct file_operations mwave_fops = { | |
| .owner = THIS_MODULE, | |
| .read = mwave_read, | |
| .write = mwave_write, | |
| .unlocked_ioctl = mwave_ioctl, | |
| .open = mwave_open, | |
| .release = mwave_close, | |
| .llseek = default_llseek, | |
| }; | |
| static struct miscdevice mwave_misc_dev = { MWAVE_MINOR, "mwave", &mwave_fops }; | |
| #if 0 /* totally b0rked */ | |
| /* | |
| * sysfs support <paulsch@us.ibm.com> | |
| */ | |
| struct device mwave_device; | |
| /* Prevent code redundancy, create a macro for mwave_show_* functions. */ | |
| #define mwave_show_function(attr_name, format_string, field) \ | |
| static ssize_t mwave_show_##attr_name(struct device *dev, struct device_attribute *attr, char *buf) \ | |
| { \ | |
| DSP_3780I_CONFIG_SETTINGS *pSettings = \ | |
| &mwave_s_mdd.rBDData.rDspSettings; \ | |
| return sprintf(buf, format_string, pSettings->field); \ | |
| } | |
| /* All of our attributes are read attributes. */ | |
| #define mwave_dev_rd_attr(attr_name, format_string, field) \ | |
| mwave_show_function(attr_name, format_string, field) \ | |
| static DEVICE_ATTR(attr_name, S_IRUGO, mwave_show_##attr_name, NULL) | |
| mwave_dev_rd_attr (3780i_dma, "%i\n", usDspDma); | |
| mwave_dev_rd_attr (3780i_irq, "%i\n", usDspIrq); | |
| mwave_dev_rd_attr (3780i_io, "%#.4x\n", usDspBaseIO); | |
| mwave_dev_rd_attr (uart_irq, "%i\n", usUartIrq); | |
| mwave_dev_rd_attr (uart_io, "%#.4x\n", usUartBaseIO); | |
| static struct device_attribute * const mwave_dev_attrs[] = { | |
| &dev_attr_3780i_dma, | |
| &dev_attr_3780i_irq, | |
| &dev_attr_3780i_io, | |
| &dev_attr_uart_irq, | |
| &dev_attr_uart_io, | |
| }; | |
| #endif | |
| /* | |
| * mwave_init is called on module load | |
| * | |
| * mwave_exit is called on module unload | |
| * mwave_exit is also used to clean up after an aborted mwave_init | |
| */ | |
| static void mwave_exit(void) | |
| { | |
| pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; | |
| PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit entry\n"); | |
| #if 0 | |
| for (i = 0; i < pDrvData->nr_registered_attrs; i++) | |
| device_remove_file(&mwave_device, mwave_dev_attrs[i]); | |
| pDrvData->nr_registered_attrs = 0; | |
| if (pDrvData->device_registered) { | |
| device_unregister(&mwave_device); | |
| pDrvData->device_registered = false; | |
| } | |
| #endif | |
| if ( pDrvData->sLine >= 0 ) { | |
| serial8250_unregister_port(pDrvData->sLine); | |
| } | |
| if (pDrvData->bMwaveDevRegistered) { | |
| misc_deregister(&mwave_misc_dev); | |
| } | |
| if (pDrvData->bDSPEnabled) { | |
| tp3780I_DisableDSP(&pDrvData->rBDData); | |
| } | |
| if (pDrvData->bResourcesClaimed) { | |
| tp3780I_ReleaseResources(&pDrvData->rBDData); | |
| } | |
| if (pDrvData->bBDInitialized) { | |
| tp3780I_Cleanup(&pDrvData->rBDData); | |
| } | |
| PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit exit\n"); | |
| } | |
| module_exit(mwave_exit); | |
| static int __init mwave_init(void) | |
| { | |
| int i; | |
| int retval = 0; | |
| pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; | |
| PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_init entry\n"); | |
| memset(&mwave_s_mdd, 0, sizeof(MWAVE_DEVICE_DATA)); | |
| pDrvData->bBDInitialized = false; | |
| pDrvData->bResourcesClaimed = false; | |
| pDrvData->bDSPEnabled = false; | |
| pDrvData->bDSPReset = false; | |
| pDrvData->bMwaveDevRegistered = false; | |
| pDrvData->sLine = -1; | |
| for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) { | |
| pDrvData->IPCs[i].bIsEnabled = false; | |
| pDrvData->IPCs[i].bIsHere = false; | |
| pDrvData->IPCs[i].usIntCount = 0; /* no ints received yet */ | |
| init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue); | |
| } | |
| retval = tp3780I_InitializeBoardData(&pDrvData->rBDData); | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_init, return from tp3780I_InitializeBoardData" | |
| " retval %x\n", | |
| retval); | |
| if (retval) { | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd::mwave_init: Error:" | |
| " Failed to initialize board data\n"); | |
| goto cleanup_error; | |
| } | |
| pDrvData->bBDInitialized = true; | |
| retval = tp3780I_CalcResources(&pDrvData->rBDData); | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_init, return from tp3780I_CalcResources" | |
| " retval %x\n", | |
| retval); | |
| if (retval) { | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd:mwave_init: Error:" | |
| " Failed to calculate resources\n"); | |
| goto cleanup_error; | |
| } | |
| retval = tp3780I_ClaimResources(&pDrvData->rBDData); | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_init, return from tp3780I_ClaimResources" | |
| " retval %x\n", | |
| retval); | |
| if (retval) { | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd:mwave_init: Error:" | |
| " Failed to claim resources\n"); | |
| goto cleanup_error; | |
| } | |
| pDrvData->bResourcesClaimed = true; | |
| retval = tp3780I_EnableDSP(&pDrvData->rBDData); | |
| PRINTK_2(TRACE_MWAVE, | |
| "mwavedd::mwave_init, return from tp3780I_EnableDSP" | |
| " retval %x\n", | |
| retval); | |
| if (retval) { | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd:mwave_init: Error:" | |
| " Failed to enable DSP\n"); | |
| goto cleanup_error; | |
| } | |
| pDrvData->bDSPEnabled = true; | |
| if (misc_register(&mwave_misc_dev) < 0) { | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd:mwave_init: Error:" | |
| " Failed to register misc device\n"); | |
| goto cleanup_error; | |
| } | |
| pDrvData->bMwaveDevRegistered = true; | |
| pDrvData->sLine = register_serial_portandirq( | |
| pDrvData->rBDData.rDspSettings.usUartBaseIO, | |
| pDrvData->rBDData.rDspSettings.usUartIrq | |
| ); | |
| if (pDrvData->sLine < 0) { | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd:mwave_init: Error:" | |
| " Failed to register serial driver\n"); | |
| goto cleanup_error; | |
| } | |
| /* uart is registered */ | |
| #if 0 | |
| /* sysfs */ | |
| memset(&mwave_device, 0, sizeof (struct device)); | |
| dev_set_name(&mwave_device, "mwave"); | |
| if (device_register(&mwave_device)) | |
| goto cleanup_error; | |
| pDrvData->device_registered = true; | |
| for (i = 0; i < ARRAY_SIZE(mwave_dev_attrs); i++) { | |
| if(device_create_file(&mwave_device, mwave_dev_attrs[i])) { | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd:mwave_init: Error:" | |
| " Failed to create sysfs file %s\n", | |
| mwave_dev_attrs[i]->attr.name); | |
| goto cleanup_error; | |
| } | |
| pDrvData->nr_registered_attrs++; | |
| } | |
| #endif | |
| /* SUCCESS! */ | |
| return 0; | |
| cleanup_error: | |
| PRINTK_ERROR(KERN_ERR_MWAVE | |
| "mwavedd::mwave_init: Error:" | |
| " Failed to initialize\n"); | |
| mwave_exit(); /* clean up */ | |
| return -EIO; | |
| } | |
| module_init(mwave_init); | |