| config CLKDEV_LOOKUP | |
| bool | |
| select HAVE_CLK | |
| config HAVE_CLK_PREPARE | |
| bool | |
| config COMMON_CLK | |
| bool | |
| select HAVE_CLK_PREPARE | |
| select CLKDEV_LOOKUP | |
| select SRCU | |
| select RATIONAL | |
| ---help--- | |
| The common clock framework is a single definition of struct | |
| clk, useful across many platforms, as well as an | |
| implementation of the clock API in include/linux/clk.h. | |
| Architectures utilizing the common struct clk should select | |
| this option. | |
| menu "Common Clock Framework" | |
| depends on COMMON_CLK | |
| config COMMON_CLK_WM831X | |
| tristate "Clock driver for WM831x/2x PMICs" | |
| depends on MFD_WM831X | |
| ---help--- | |
| Supports the clocking subsystem of the WM831x/2x series of | |
| PMICs from Wolfson Microelectronics. | |
| source "drivers/clk/versatile/Kconfig" | |
| config COMMON_CLK_MAX77686 | |
| tristate "Clock driver for Maxim 77620/77686/77802 MFD" | |
| depends on MFD_MAX77686 || MFD_MAX77620 | |
| ---help--- | |
| This driver supports Maxim 77620/77686/77802 crystal oscillator | |
| clock. | |
| config COMMON_CLK_RK808 | |
| tristate "Clock driver for RK808/RK818" | |
| depends on MFD_RK808 | |
| ---help--- | |
| This driver supports RK808 and RK818 crystal oscillator clock. These | |
| multi-function devices have two fixed-rate oscillators, | |
| clocked at 32KHz each. Clkout1 is always on, Clkout2 can off | |
| by control register. | |
| config COMMON_CLK_SCPI | |
| tristate "Clock driver controlled via SCPI interface" | |
| depends on ARM_SCPI_PROTOCOL || COMPILE_TEST | |
| ---help--- | |
| This driver provides support for clocks that are controlled | |
| by firmware that implements the SCPI interface. | |
| This driver uses SCPI Message Protocol to interact with the | |
| firmware providing all the clock controls. | |
| config COMMON_CLK_SI5351 | |
| tristate "Clock driver for SiLabs 5351A/B/C" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select RATIONAL | |
| ---help--- | |
| This driver supports Silicon Labs 5351A/B/C programmable clock | |
| generators. | |
| config COMMON_CLK_SI514 | |
| tristate "Clock driver for SiLabs 514 devices" | |
| depends on I2C | |
| depends on OF | |
| select REGMAP_I2C | |
| help | |
| ---help--- | |
| This driver supports the Silicon Labs 514 programmable clock | |
| generator. | |
| config COMMON_CLK_SI570 | |
| tristate "Clock driver for SiLabs 570 and compatible devices" | |
| depends on I2C | |
| depends on OF | |
| select REGMAP_I2C | |
| help | |
| ---help--- | |
| This driver supports Silicon Labs 570/571/598/599 programmable | |
| clock generators. | |
| config COMMON_CLK_CDCE706 | |
| tristate "Clock driver for TI CDCE706 clock synthesizer" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select RATIONAL | |
| ---help--- | |
| This driver supports TI CDCE706 programmable 3-PLL clock synthesizer. | |
| config COMMON_CLK_CDCE925 | |
| tristate "Clock driver for TI CDCE925 devices" | |
| depends on I2C | |
| depends on OF | |
| select REGMAP_I2C | |
| help | |
| ---help--- | |
| This driver supports the TI CDCE925 programmable clock synthesizer. | |
| The chip contains two PLLs with spread-spectrum clocking support and | |
| five output dividers. The driver only supports the following setup, | |
| and uses a fixed setting for the output muxes. | |
| Y1 is derived from the input clock | |
| Y2 and Y3 derive from PLL1 | |
| Y4 and Y5 derive from PLL2 | |
| Given a target output frequency, the driver will set the PLL and | |
| divider to best approximate the desired output. | |
| config COMMON_CLK_CS2000_CP | |
| tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the CS2000 clock multiplier. | |
| config COMMON_CLK_S2MPS11 | |
| tristate "Clock driver for S2MPS1X/S5M8767 MFD" | |
| depends on MFD_SEC_CORE | |
| ---help--- | |
| This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator | |
| clock. These multi-function devices have two (S2MPS14) or three | |
| (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each. | |
| config CLK_TWL6040 | |
| tristate "External McPDM functional clock from twl6040" | |
| depends on TWL6040_CORE | |
| ---help--- | |
| Enable the external functional clock support on OMAP4+ platforms for | |
| McPDM. McPDM module is using the external bit clock on the McPDM bus | |
| as functional clock. | |
| config COMMON_CLK_AXI_CLKGEN | |
| tristate "AXI clkgen driver" | |
| depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST | |
| help | |
| ---help--- | |
| Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx | |
| FPGAs. It is commonly used in Analog Devices' reference designs. | |
| config CLK_QORIQ | |
| bool "Clock driver for Freescale QorIQ platforms" | |
| depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF | |
| ---help--- | |
| This adds the clock driver support for Freescale QorIQ platforms | |
| using common clock framework. | |
| config COMMON_CLK_XGENE | |
| bool "Clock driver for APM XGene SoC" | |
| default y | |
| depends on ARM64 || COMPILE_TEST | |
| ---help--- | |
| Sypport for the APM X-Gene SoC reference, PLL, and device clocks. | |
| config COMMON_CLK_KEYSTONE | |
| tristate "Clock drivers for Keystone based SOCs" | |
| depends on (ARCH_KEYSTONE || COMPILE_TEST) && OF | |
| ---help--- | |
| Supports clock drivers for Keystone based SOCs. These SOCs have local | |
| a power sleep control module that gate the clock to the IPs and PLLs. | |
| config COMMON_CLK_NXP | |
| def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX) | |
| select REGMAP_MMIO if ARCH_LPC32XX | |
| select MFD_SYSCON if ARCH_LPC18XX | |
| ---help--- | |
| Support for clock providers on NXP platforms. | |
| config COMMON_CLK_PALMAS | |
| tristate "Clock driver for TI Palmas devices" | |
| depends on MFD_PALMAS | |
| ---help--- | |
| This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO | |
| using common clock framework. | |
| config COMMON_CLK_PWM | |
| tristate "Clock driver for PWMs used as clock outputs" | |
| depends on PWM | |
| ---help--- | |
| Adapter driver so that any PWM output can be (mis)used as clock signal | |
| at 50% duty cycle. | |
| config COMMON_CLK_PXA | |
| def_bool COMMON_CLK && ARCH_PXA | |
| ---help--- | |
| Support for the Marvell PXA SoC. | |
| config COMMON_CLK_PIC32 | |
| def_bool COMMON_CLK && MACH_PIC32 | |
| config COMMON_CLK_OXNAS | |
| bool "Clock driver for the OXNAS SoC Family" | |
| depends on ARCH_OXNAS || COMPILE_TEST | |
| select MFD_SYSCON | |
| ---help--- | |
| Support for the OXNAS SoC Family clocks. | |
| config GEM5_CPUFREQ_CLK | |
| bool "Clk driver for GEM5 Platform" | |
| ---help--- | |
| Enable clk hardware for cpufreq in gem5 platforms | |
| source "drivers/clk/bcm/Kconfig" | |
| source "drivers/clk/hisilicon/Kconfig" | |
| source "drivers/clk/mediatek/Kconfig" | |
| source "drivers/clk/meson/Kconfig" | |
| source "drivers/clk/mvebu/Kconfig" | |
| source "drivers/clk/qcom/Kconfig" | |
| source "drivers/clk/renesas/Kconfig" | |
| source "drivers/clk/samsung/Kconfig" | |
| source "drivers/clk/sunxi-ng/Kconfig" | |
| source "drivers/clk/tegra/Kconfig" | |
| source "drivers/clk/ti/Kconfig" | |
| source "drivers/clk/uniphier/Kconfig" | |
| endmenu |