| /* | |
| * Marvell EBU SoC common clock handling | |
| * | |
| * Copyright (C) 2012 Marvell | |
| * | |
| * Gregory CLEMENT <gregory.clement@free-electrons.com> | |
| * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> | |
| * Andrew Lunn <andrew@lunn.ch> | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/clk.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/io.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/syscore_ops.h> | |
| #include "common.h" | |
| /* | |
| * Core Clocks | |
| */ | |
| #define SSCG_CONF_MODE(reg) (((reg) >> 16) & 0x3) | |
| #define SSCG_SPREAD_DOWN 0x0 | |
| #define SSCG_SPREAD_UP 0x1 | |
| #define SSCG_SPREAD_CENTRAL 0x2 | |
| #define SSCG_CONF_LOW(reg) (((reg) >> 8) & 0xFF) | |
| #define SSCG_CONF_HIGH(reg) ((reg) & 0xFF) | |
| static struct clk_onecell_data clk_data; | |
| /* | |
| * This function can be used by the Kirkwood, the Armada 370, the | |
| * Armada XP and the Armada 375 SoC. The name of the function was | |
| * chosen following the dt convention: using the first known SoC | |
| * compatible with it. | |
| */ | |
| u32 kirkwood_fix_sscg_deviation(u32 system_clk) | |
| { | |
| struct device_node *sscg_np = NULL; | |
| void __iomem *sscg_map; | |
| u32 sscg_reg; | |
| s32 low_bound, high_bound; | |
| u64 freq_swing_half; | |
| sscg_np = of_find_node_by_name(NULL, "sscg"); | |
| if (sscg_np == NULL) { | |
| pr_err("cannot get SSCG register node\n"); | |
| return system_clk; | |
| } | |
| sscg_map = of_iomap(sscg_np, 0); | |
| if (sscg_map == NULL) { | |
| pr_err("cannot map SSCG register\n"); | |
| goto out; | |
| } | |
| sscg_reg = readl(sscg_map); | |
| high_bound = SSCG_CONF_HIGH(sscg_reg); | |
| low_bound = SSCG_CONF_LOW(sscg_reg); | |
| if ((high_bound - low_bound) <= 0) | |
| goto out; | |
| /* | |
| * From Marvell engineer we got the following formula (when | |
| * this code was written, the datasheet was erroneous) | |
| * Spread percentage = 1/96 * (H - L) / H | |
| * H = SSCG_High_Boundary | |
| * L = SSCG_Low_Boundary | |
| * | |
| * As the deviation is half of spread then it lead to the | |
| * following formula in the code. | |
| * | |
| * To avoid an overflow and not lose any significant digit in | |
| * the same time we have to use a 64 bit integer. | |
| */ | |
| freq_swing_half = (((u64)high_bound - (u64)low_bound) | |
| * (u64)system_clk); | |
| do_div(freq_swing_half, (2 * 96 * high_bound)); | |
| switch (SSCG_CONF_MODE(sscg_reg)) { | |
| case SSCG_SPREAD_DOWN: | |
| system_clk -= freq_swing_half; | |
| break; | |
| case SSCG_SPREAD_UP: | |
| system_clk += freq_swing_half; | |
| break; | |
| case SSCG_SPREAD_CENTRAL: | |
| default: | |
| break; | |
| } | |
| iounmap(sscg_map); | |
| out: | |
| of_node_put(sscg_np); | |
| return system_clk; | |
| } | |
| void __init mvebu_coreclk_setup(struct device_node *np, | |
| const struct coreclk_soc_desc *desc) | |
| { | |
| const char *tclk_name = "tclk"; | |
| const char *cpuclk_name = "cpuclk"; | |
| void __iomem *base; | |
| unsigned long rate; | |
| int n; | |
| base = of_iomap(np, 0); | |
| if (WARN_ON(!base)) | |
| return; | |
| /* Allocate struct for TCLK, cpu clk, and core ratio clocks */ | |
| clk_data.clk_num = 2 + desc->num_ratios; | |
| /* One more clock for the optional refclk */ | |
| if (desc->get_refclk_freq) | |
| clk_data.clk_num += 1; | |
| clk_data.clks = kzalloc(clk_data.clk_num * sizeof(struct clk *), | |
| GFP_KERNEL); | |
| if (WARN_ON(!clk_data.clks)) { | |
| iounmap(base); | |
| return; | |
| } | |
| /* Register TCLK */ | |
| of_property_read_string_index(np, "clock-output-names", 0, | |
| &tclk_name); | |
| rate = desc->get_tclk_freq(base); | |
| clk_data.clks[0] = clk_register_fixed_rate(NULL, tclk_name, NULL, 0, | |
| rate); | |
| WARN_ON(IS_ERR(clk_data.clks[0])); | |
| /* Register CPU clock */ | |
| of_property_read_string_index(np, "clock-output-names", 1, | |
| &cpuclk_name); | |
| rate = desc->get_cpu_freq(base); | |
| if (desc->is_sscg_enabled && desc->fix_sscg_deviation | |
| && desc->is_sscg_enabled(base)) | |
| rate = desc->fix_sscg_deviation(rate); | |
| clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, 0, | |
| rate); | |
| WARN_ON(IS_ERR(clk_data.clks[1])); | |
| /* Register fixed-factor clocks derived from CPU clock */ | |
| for (n = 0; n < desc->num_ratios; n++) { | |
| const char *rclk_name = desc->ratios[n].name; | |
| int mult, div; | |
| of_property_read_string_index(np, "clock-output-names", | |
| 2+n, &rclk_name); | |
| desc->get_clk_ratio(base, desc->ratios[n].id, &mult, &div); | |
| clk_data.clks[2+n] = clk_register_fixed_factor(NULL, rclk_name, | |
| cpuclk_name, 0, mult, div); | |
| WARN_ON(IS_ERR(clk_data.clks[2+n])); | |
| } | |
| /* Register optional refclk */ | |
| if (desc->get_refclk_freq) { | |
| const char *name = "refclk"; | |
| of_property_read_string_index(np, "clock-output-names", | |
| 2 + desc->num_ratios, &name); | |
| rate = desc->get_refclk_freq(base); | |
| clk_data.clks[2 + desc->num_ratios] = | |
| clk_register_fixed_rate(NULL, name, NULL, 0, rate); | |
| WARN_ON(IS_ERR(clk_data.clks[2 + desc->num_ratios])); | |
| } | |
| /* SAR register isn't needed anymore */ | |
| iounmap(base); | |
| of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); | |
| } | |
| /* | |
| * Clock Gating Control | |
| */ | |
| DEFINE_SPINLOCK(ctrl_gating_lock); | |
| struct clk_gating_ctrl { | |
| spinlock_t *lock; | |
| struct clk **gates; | |
| int num_gates; | |
| void __iomem *base; | |
| u32 saved_reg; | |
| }; | |
| static struct clk_gating_ctrl *ctrl; | |
| static struct clk *clk_gating_get_src( | |
| struct of_phandle_args *clkspec, void *data) | |
| { | |
| int n; | |
| if (clkspec->args_count < 1) | |
| return ERR_PTR(-EINVAL); | |
| for (n = 0; n < ctrl->num_gates; n++) { | |
| struct clk_gate *gate = | |
| to_clk_gate(__clk_get_hw(ctrl->gates[n])); | |
| if (clkspec->args[0] == gate->bit_idx) | |
| return ctrl->gates[n]; | |
| } | |
| return ERR_PTR(-ENODEV); | |
| } | |
| static int mvebu_clk_gating_suspend(void) | |
| { | |
| ctrl->saved_reg = readl(ctrl->base); | |
| return 0; | |
| } | |
| static void mvebu_clk_gating_resume(void) | |
| { | |
| writel(ctrl->saved_reg, ctrl->base); | |
| } | |
| static struct syscore_ops clk_gate_syscore_ops = { | |
| .suspend = mvebu_clk_gating_suspend, | |
| .resume = mvebu_clk_gating_resume, | |
| }; | |
| void __init mvebu_clk_gating_setup(struct device_node *np, | |
| const struct clk_gating_soc_desc *desc) | |
| { | |
| struct clk *clk; | |
| void __iomem *base; | |
| const char *default_parent = NULL; | |
| int n; | |
| if (ctrl) { | |
| pr_err("mvebu-clk-gating: cannot instantiate more than one gatable clock device\n"); | |
| return; | |
| } | |
| base = of_iomap(np, 0); | |
| if (WARN_ON(!base)) | |
| return; | |
| clk = of_clk_get(np, 0); | |
| if (!IS_ERR(clk)) { | |
| default_parent = __clk_get_name(clk); | |
| clk_put(clk); | |
| } | |
| ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); | |
| if (WARN_ON(!ctrl)) | |
| goto ctrl_out; | |
| /* lock must already be initialized */ | |
| ctrl->lock = &ctrl_gating_lock; | |
| ctrl->base = base; | |
| /* Count, allocate, and register clock gates */ | |
| for (n = 0; desc[n].name;) | |
| n++; | |
| ctrl->num_gates = n; | |
| ctrl->gates = kzalloc(ctrl->num_gates * sizeof(struct clk *), | |
| GFP_KERNEL); | |
| if (WARN_ON(!ctrl->gates)) | |
| goto gates_out; | |
| for (n = 0; n < ctrl->num_gates; n++) { | |
| const char *parent = | |
| (desc[n].parent) ? desc[n].parent : default_parent; | |
| ctrl->gates[n] = clk_register_gate(NULL, desc[n].name, parent, | |
| desc[n].flags, base, desc[n].bit_idx, | |
| 0, ctrl->lock); | |
| WARN_ON(IS_ERR(ctrl->gates[n])); | |
| } | |
| of_clk_add_provider(np, clk_gating_get_src, ctrl); | |
| register_syscore_ops(&clk_gate_syscore_ops); | |
| return; | |
| gates_out: | |
| kfree(ctrl); | |
| ctrl_out: | |
| iounmap(base); | |
| } |