| /* | |
| * drivers/clk/tegra/clk-emc.c | |
| * | |
| * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. | |
| * | |
| * Author: | |
| * Mikko Perttunen <mperttunen@nvidia.com> | |
| * | |
| * This software is licensed under the terms of the GNU General Public | |
| * License version 2, as published by the Free Software Foundation, and | |
| * may be copied, distributed, and modified under those terms. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/clk-provider.h> | |
| #include <linux/clk.h> | |
| #include <linux/clkdev.h> | |
| #include <linux/delay.h> | |
| #include <linux/module.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/sort.h> | |
| #include <linux/string.h> | |
| #include <soc/tegra/fuse.h> | |
| #include <soc/tegra/emc.h> | |
| #include "clk.h" | |
| #define CLK_SOURCE_EMC 0x19c | |
| #define CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_SHIFT 0 | |
| #define CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_MASK 0xff | |
| #define CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR(x) (((x) & CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_MASK) << \ | |
| CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_SHIFT) | |
| #define CLK_SOURCE_EMC_EMC_2X_CLK_SRC_SHIFT 29 | |
| #define CLK_SOURCE_EMC_EMC_2X_CLK_SRC_MASK 0x7 | |
| #define CLK_SOURCE_EMC_EMC_2X_CLK_SRC(x) (((x) & CLK_SOURCE_EMC_EMC_2X_CLK_SRC_MASK) << \ | |
| CLK_SOURCE_EMC_EMC_2X_CLK_SRC_SHIFT) | |
| static const char * const emc_parent_clk_names[] = { | |
| "pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", | |
| "pll_c2", "pll_c3", "pll_c_ud" | |
| }; | |
| /* | |
| * List of clock sources for various parents the EMC clock can have. | |
| * When we change the timing to a timing with a parent that has the same | |
| * clock source as the current parent, we must first change to a backup | |
| * timing that has a different clock source. | |
| */ | |
| #define EMC_SRC_PLL_M 0 | |
| #define EMC_SRC_PLL_C 1 | |
| #define EMC_SRC_PLL_P 2 | |
| #define EMC_SRC_CLK_M 3 | |
| #define EMC_SRC_PLL_C2 4 | |
| #define EMC_SRC_PLL_C3 5 | |
| static const char emc_parent_clk_sources[] = { | |
| EMC_SRC_PLL_M, EMC_SRC_PLL_C, EMC_SRC_PLL_P, EMC_SRC_CLK_M, | |
| EMC_SRC_PLL_M, EMC_SRC_PLL_C2, EMC_SRC_PLL_C3, EMC_SRC_PLL_C | |
| }; | |
| struct emc_timing { | |
| unsigned long rate, parent_rate; | |
| u8 parent_index; | |
| struct clk *parent; | |
| u32 ram_code; | |
| }; | |
| struct tegra_clk_emc { | |
| struct clk_hw hw; | |
| void __iomem *clk_regs; | |
| struct clk *prev_parent; | |
| bool changing_timing; | |
| struct device_node *emc_node; | |
| struct tegra_emc *emc; | |
| int num_timings; | |
| struct emc_timing *timings; | |
| spinlock_t *lock; | |
| }; | |
| /* Common clock framework callback implementations */ | |
| static unsigned long emc_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| struct tegra_clk_emc *tegra; | |
| u32 val, div; | |
| tegra = container_of(hw, struct tegra_clk_emc, hw); | |
| /* | |
| * CCF wrongly assumes that the parent won't change during set_rate, | |
| * so get the parent rate explicitly. | |
| */ | |
| parent_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); | |
| val = readl(tegra->clk_regs + CLK_SOURCE_EMC); | |
| div = val & CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_MASK; | |
| return parent_rate / (div + 2) * 2; | |
| } | |
| /* | |
| * Rounds up unless no higher rate exists, in which case down. This way is | |
| * safer since things have EMC rate floors. Also don't touch parent_rate | |
| * since we don't want the CCF to play with our parent clocks. | |
| */ | |
| static int emc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) | |
| { | |
| struct tegra_clk_emc *tegra; | |
| u8 ram_code = tegra_read_ram_code(); | |
| struct emc_timing *timing = NULL; | |
| int i; | |
| tegra = container_of(hw, struct tegra_clk_emc, hw); | |
| for (i = 0; i < tegra->num_timings; i++) { | |
| if (tegra->timings[i].ram_code != ram_code) | |
| continue; | |
| timing = tegra->timings + i; | |
| if (timing->rate > req->max_rate) { | |
| i = min(i, 1); | |
| req->rate = tegra->timings[i - 1].rate; | |
| return 0; | |
| } | |
| if (timing->rate < req->min_rate) | |
| continue; | |
| if (timing->rate >= req->rate) { | |
| req->rate = timing->rate; | |
| return 0; | |
| } | |
| } | |
| if (timing) { | |
| req->rate = timing->rate; | |
| return 0; | |
| } | |
| req->rate = clk_hw_get_rate(hw); | |
| return 0; | |
| } | |
| static u8 emc_get_parent(struct clk_hw *hw) | |
| { | |
| struct tegra_clk_emc *tegra; | |
| u32 val; | |
| tegra = container_of(hw, struct tegra_clk_emc, hw); | |
| val = readl(tegra->clk_regs + CLK_SOURCE_EMC); | |
| return (val >> CLK_SOURCE_EMC_EMC_2X_CLK_SRC_SHIFT) | |
| & CLK_SOURCE_EMC_EMC_2X_CLK_SRC_MASK; | |
| } | |
| static struct tegra_emc *emc_ensure_emc_driver(struct tegra_clk_emc *tegra) | |
| { | |
| struct platform_device *pdev; | |
| if (tegra->emc) | |
| return tegra->emc; | |
| if (!tegra->emc_node) | |
| return NULL; | |
| pdev = of_find_device_by_node(tegra->emc_node); | |
| if (!pdev) { | |
| pr_err("%s: could not get external memory controller\n", | |
| __func__); | |
| return NULL; | |
| } | |
| of_node_put(tegra->emc_node); | |
| tegra->emc_node = NULL; | |
| tegra->emc = platform_get_drvdata(pdev); | |
| if (!tegra->emc) { | |
| pr_err("%s: cannot find EMC driver\n", __func__); | |
| return NULL; | |
| } | |
| return tegra->emc; | |
| } | |
| static int emc_set_timing(struct tegra_clk_emc *tegra, | |
| struct emc_timing *timing) | |
| { | |
| int err; | |
| u8 div; | |
| u32 car_value; | |
| unsigned long flags = 0; | |
| struct tegra_emc *emc = emc_ensure_emc_driver(tegra); | |
| if (!emc) | |
| return -ENOENT; | |
| pr_debug("going to rate %ld prate %ld p %s\n", timing->rate, | |
| timing->parent_rate, __clk_get_name(timing->parent)); | |
| if (emc_get_parent(&tegra->hw) == timing->parent_index && | |
| clk_get_rate(timing->parent) != timing->parent_rate) { | |
| BUG(); | |
| return -EINVAL; | |
| } | |
| tegra->changing_timing = true; | |
| err = clk_set_rate(timing->parent, timing->parent_rate); | |
| if (err) { | |
| pr_err("cannot change parent %s rate to %ld: %d\n", | |
| __clk_get_name(timing->parent), timing->parent_rate, | |
| err); | |
| return err; | |
| } | |
| err = clk_prepare_enable(timing->parent); | |
| if (err) { | |
| pr_err("cannot enable parent clock: %d\n", err); | |
| return err; | |
| } | |
| div = timing->parent_rate / (timing->rate / 2) - 2; | |
| err = tegra_emc_prepare_timing_change(emc, timing->rate); | |
| if (err) | |
| return err; | |
| spin_lock_irqsave(tegra->lock, flags); | |
| car_value = readl(tegra->clk_regs + CLK_SOURCE_EMC); | |
| car_value &= ~CLK_SOURCE_EMC_EMC_2X_CLK_SRC(~0); | |
| car_value |= CLK_SOURCE_EMC_EMC_2X_CLK_SRC(timing->parent_index); | |
| car_value &= ~CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR(~0); | |
| car_value |= CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR(div); | |
| writel(car_value, tegra->clk_regs + CLK_SOURCE_EMC); | |
| spin_unlock_irqrestore(tegra->lock, flags); | |
| tegra_emc_complete_timing_change(emc, timing->rate); | |
| clk_hw_reparent(&tegra->hw, __clk_get_hw(timing->parent)); | |
| clk_disable_unprepare(tegra->prev_parent); | |
| tegra->prev_parent = timing->parent; | |
| tegra->changing_timing = false; | |
| return 0; | |
| } | |
| /* | |
| * Get backup timing to use as an intermediate step when a change between | |
| * two timings with the same clock source has been requested. First try to | |
| * find a timing with a higher clock rate to avoid a rate below any set rate | |
| * floors. If that is not possible, find a lower rate. | |
| */ | |
| static struct emc_timing *get_backup_timing(struct tegra_clk_emc *tegra, | |
| int timing_index) | |
| { | |
| int i; | |
| u32 ram_code = tegra_read_ram_code(); | |
| struct emc_timing *timing; | |
| for (i = timing_index+1; i < tegra->num_timings; i++) { | |
| timing = tegra->timings + i; | |
| if (timing->ram_code != ram_code) | |
| continue; | |
| if (emc_parent_clk_sources[timing->parent_index] != | |
| emc_parent_clk_sources[ | |
| tegra->timings[timing_index].parent_index]) | |
| return timing; | |
| } | |
| for (i = timing_index-1; i >= 0; --i) { | |
| timing = tegra->timings + i; | |
| if (timing->ram_code != ram_code) | |
| continue; | |
| if (emc_parent_clk_sources[timing->parent_index] != | |
| emc_parent_clk_sources[ | |
| tegra->timings[timing_index].parent_index]) | |
| return timing; | |
| } | |
| return NULL; | |
| } | |
| static int emc_set_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long parent_rate) | |
| { | |
| struct tegra_clk_emc *tegra; | |
| struct emc_timing *timing = NULL; | |
| int i, err; | |
| u32 ram_code = tegra_read_ram_code(); | |
| tegra = container_of(hw, struct tegra_clk_emc, hw); | |
| if (clk_hw_get_rate(hw) == rate) | |
| return 0; | |
| /* | |
| * When emc_set_timing changes the parent rate, CCF will propagate | |
| * that downward to us, so ignore any set_rate calls while a rate | |
| * change is already going on. | |
| */ | |
| if (tegra->changing_timing) | |
| return 0; | |
| for (i = 0; i < tegra->num_timings; i++) { | |
| if (tegra->timings[i].rate == rate && | |
| tegra->timings[i].ram_code == ram_code) { | |
| timing = tegra->timings + i; | |
| break; | |
| } | |
| } | |
| if (!timing) { | |
| pr_err("cannot switch to rate %ld without emc table\n", rate); | |
| return -EINVAL; | |
| } | |
| if (emc_parent_clk_sources[emc_get_parent(hw)] == | |
| emc_parent_clk_sources[timing->parent_index] && | |
| clk_get_rate(timing->parent) != timing->parent_rate) { | |
| /* | |
| * Parent clock source not changed but parent rate has changed, | |
| * need to temporarily switch to another parent | |
| */ | |
| struct emc_timing *backup_timing; | |
| backup_timing = get_backup_timing(tegra, i); | |
| if (!backup_timing) { | |
| pr_err("cannot find backup timing\n"); | |
| return -EINVAL; | |
| } | |
| pr_debug("using %ld as backup rate when going to %ld\n", | |
| backup_timing->rate, rate); | |
| err = emc_set_timing(tegra, backup_timing); | |
| if (err) { | |
| pr_err("cannot set backup timing: %d\n", err); | |
| return err; | |
| } | |
| } | |
| return emc_set_timing(tegra, timing); | |
| } | |
| /* Initialization and deinitialization */ | |
| static int load_one_timing_from_dt(struct tegra_clk_emc *tegra, | |
| struct emc_timing *timing, | |
| struct device_node *node) | |
| { | |
| int err, i; | |
| u32 tmp; | |
| err = of_property_read_u32(node, "clock-frequency", &tmp); | |
| if (err) { | |
| pr_err("timing %s: failed to read rate\n", node->full_name); | |
| return err; | |
| } | |
| timing->rate = tmp; | |
| err = of_property_read_u32(node, "nvidia,parent-clock-frequency", &tmp); | |
| if (err) { | |
| pr_err("timing %s: failed to read parent rate\n", | |
| node->full_name); | |
| return err; | |
| } | |
| timing->parent_rate = tmp; | |
| timing->parent = of_clk_get_by_name(node, "emc-parent"); | |
| if (IS_ERR(timing->parent)) { | |
| pr_err("timing %s: failed to get parent clock\n", | |
| node->full_name); | |
| return PTR_ERR(timing->parent); | |
| } | |
| timing->parent_index = 0xff; | |
| for (i = 0; i < ARRAY_SIZE(emc_parent_clk_names); i++) { | |
| if (!strcmp(emc_parent_clk_names[i], | |
| __clk_get_name(timing->parent))) { | |
| timing->parent_index = i; | |
| break; | |
| } | |
| } | |
| if (timing->parent_index == 0xff) { | |
| pr_err("timing %s: %s is not a valid parent\n", | |
| node->full_name, __clk_get_name(timing->parent)); | |
| clk_put(timing->parent); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int cmp_timings(const void *_a, const void *_b) | |
| { | |
| const struct emc_timing *a = _a; | |
| const struct emc_timing *b = _b; | |
| if (a->rate < b->rate) | |
| return -1; | |
| else if (a->rate == b->rate) | |
| return 0; | |
| else | |
| return 1; | |
| } | |
| static int load_timings_from_dt(struct tegra_clk_emc *tegra, | |
| struct device_node *node, | |
| u32 ram_code) | |
| { | |
| struct device_node *child; | |
| int child_count = of_get_child_count(node); | |
| int i = 0, err; | |
| tegra->timings = kcalloc(child_count, sizeof(struct emc_timing), | |
| GFP_KERNEL); | |
| if (!tegra->timings) | |
| return -ENOMEM; | |
| tegra->num_timings = child_count; | |
| for_each_child_of_node(node, child) { | |
| struct emc_timing *timing = tegra->timings + (i++); | |
| err = load_one_timing_from_dt(tegra, timing, child); | |
| if (err) { | |
| of_node_put(child); | |
| return err; | |
| } | |
| timing->ram_code = ram_code; | |
| } | |
| sort(tegra->timings, tegra->num_timings, sizeof(struct emc_timing), | |
| cmp_timings, NULL); | |
| return 0; | |
| } | |
| static const struct clk_ops tegra_clk_emc_ops = { | |
| .recalc_rate = emc_recalc_rate, | |
| .determine_rate = emc_determine_rate, | |
| .set_rate = emc_set_rate, | |
| .get_parent = emc_get_parent, | |
| }; | |
| struct clk *tegra_clk_register_emc(void __iomem *base, struct device_node *np, | |
| spinlock_t *lock) | |
| { | |
| struct tegra_clk_emc *tegra; | |
| struct clk_init_data init; | |
| struct device_node *node; | |
| u32 node_ram_code; | |
| struct clk *clk; | |
| int err; | |
| tegra = kcalloc(1, sizeof(*tegra), GFP_KERNEL); | |
| if (!tegra) | |
| return ERR_PTR(-ENOMEM); | |
| tegra->clk_regs = base; | |
| tegra->lock = lock; | |
| tegra->num_timings = 0; | |
| for_each_child_of_node(np, node) { | |
| err = of_property_read_u32(node, "nvidia,ram-code", | |
| &node_ram_code); | |
| if (err) | |
| continue; | |
| /* | |
| * Store timings for all ram codes as we cannot read the | |
| * fuses until the apbmisc driver is loaded. | |
| */ | |
| err = load_timings_from_dt(tegra, node, node_ram_code); | |
| of_node_put(node); | |
| if (err) | |
| return ERR_PTR(err); | |
| break; | |
| } | |
| if (tegra->num_timings == 0) | |
| pr_warn("%s: no memory timings registered\n", __func__); | |
| tegra->emc_node = of_parse_phandle(np, | |
| "nvidia,external-memory-controller", 0); | |
| if (!tegra->emc_node) | |
| pr_warn("%s: couldn't find node for EMC driver\n", __func__); | |
| init.name = "emc"; | |
| init.ops = &tegra_clk_emc_ops; | |
| init.flags = 0; | |
| init.parent_names = emc_parent_clk_names; | |
| init.num_parents = ARRAY_SIZE(emc_parent_clk_names); | |
| tegra->hw.init = &init; | |
| clk = clk_register(NULL, &tegra->hw); | |
| if (IS_ERR(clk)) | |
| return clk; | |
| tegra->prev_parent = clk_hw_get_parent_by_index( | |
| &tegra->hw, emc_get_parent(&tegra->hw))->clk; | |
| tegra->changing_timing = false; | |
| /* Allow debugging tools to see the EMC clock */ | |
| clk_register_clkdev(clk, "emc", "tegra-clk-debug"); | |
| clk_prepare_enable(clk); | |
| return clk; | |
| }; |