| /* | |
| * Emma Mobile Timer Support - STI | |
| * | |
| * Copyright (C) 2012 Magnus Damm | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/ioport.h> | |
| #include <linux/io.h> | |
| #include <linux/clk.h> | |
| #include <linux/irq.h> | |
| #include <linux/err.h> | |
| #include <linux/delay.h> | |
| #include <linux/clocksource.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| enum { USER_CLOCKSOURCE, USER_CLOCKEVENT, USER_NR }; | |
| struct em_sti_priv { | |
| void __iomem *base; | |
| struct clk *clk; | |
| struct platform_device *pdev; | |
| unsigned int active[USER_NR]; | |
| unsigned long rate; | |
| raw_spinlock_t lock; | |
| struct clock_event_device ced; | |
| struct clocksource cs; | |
| }; | |
| #define STI_CONTROL 0x00 | |
| #define STI_COMPA_H 0x10 | |
| #define STI_COMPA_L 0x14 | |
| #define STI_COMPB_H 0x18 | |
| #define STI_COMPB_L 0x1c | |
| #define STI_COUNT_H 0x20 | |
| #define STI_COUNT_L 0x24 | |
| #define STI_COUNT_RAW_H 0x28 | |
| #define STI_COUNT_RAW_L 0x2c | |
| #define STI_SET_H 0x30 | |
| #define STI_SET_L 0x34 | |
| #define STI_INTSTATUS 0x40 | |
| #define STI_INTRAWSTATUS 0x44 | |
| #define STI_INTENSET 0x48 | |
| #define STI_INTENCLR 0x4c | |
| #define STI_INTFFCLR 0x50 | |
| static inline unsigned long em_sti_read(struct em_sti_priv *p, int offs) | |
| { | |
| return ioread32(p->base + offs); | |
| } | |
| static inline void em_sti_write(struct em_sti_priv *p, int offs, | |
| unsigned long value) | |
| { | |
| iowrite32(value, p->base + offs); | |
| } | |
| static int em_sti_enable(struct em_sti_priv *p) | |
| { | |
| int ret; | |
| /* enable clock */ | |
| ret = clk_prepare_enable(p->clk); | |
| if (ret) { | |
| dev_err(&p->pdev->dev, "cannot enable clock\n"); | |
| return ret; | |
| } | |
| /* configure channel, periodic mode and maximum timeout */ | |
| p->rate = clk_get_rate(p->clk); | |
| /* reset the counter */ | |
| em_sti_write(p, STI_SET_H, 0x40000000); | |
| em_sti_write(p, STI_SET_L, 0x00000000); | |
| /* mask and clear pending interrupts */ | |
| em_sti_write(p, STI_INTENCLR, 3); | |
| em_sti_write(p, STI_INTFFCLR, 3); | |
| /* enable updates of counter registers */ | |
| em_sti_write(p, STI_CONTROL, 1); | |
| return 0; | |
| } | |
| static void em_sti_disable(struct em_sti_priv *p) | |
| { | |
| /* mask interrupts */ | |
| em_sti_write(p, STI_INTENCLR, 3); | |
| /* stop clock */ | |
| clk_disable_unprepare(p->clk); | |
| } | |
| static cycle_t em_sti_count(struct em_sti_priv *p) | |
| { | |
| cycle_t ticks; | |
| unsigned long flags; | |
| /* the STI hardware buffers the 48-bit count, but to | |
| * break it out into two 32-bit access the registers | |
| * must be accessed in a certain order. | |
| * Always read STI_COUNT_H before STI_COUNT_L. | |
| */ | |
| raw_spin_lock_irqsave(&p->lock, flags); | |
| ticks = (cycle_t)(em_sti_read(p, STI_COUNT_H) & 0xffff) << 32; | |
| ticks |= em_sti_read(p, STI_COUNT_L); | |
| raw_spin_unlock_irqrestore(&p->lock, flags); | |
| return ticks; | |
| } | |
| static cycle_t em_sti_set_next(struct em_sti_priv *p, cycle_t next) | |
| { | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&p->lock, flags); | |
| /* mask compare A interrupt */ | |
| em_sti_write(p, STI_INTENCLR, 1); | |
| /* update compare A value */ | |
| em_sti_write(p, STI_COMPA_H, next >> 32); | |
| em_sti_write(p, STI_COMPA_L, next & 0xffffffff); | |
| /* clear compare A interrupt source */ | |
| em_sti_write(p, STI_INTFFCLR, 1); | |
| /* unmask compare A interrupt */ | |
| em_sti_write(p, STI_INTENSET, 1); | |
| raw_spin_unlock_irqrestore(&p->lock, flags); | |
| return next; | |
| } | |
| static irqreturn_t em_sti_interrupt(int irq, void *dev_id) | |
| { | |
| struct em_sti_priv *p = dev_id; | |
| p->ced.event_handler(&p->ced); | |
| return IRQ_HANDLED; | |
| } | |
| static int em_sti_start(struct em_sti_priv *p, unsigned int user) | |
| { | |
| unsigned long flags; | |
| int used_before; | |
| int ret = 0; | |
| raw_spin_lock_irqsave(&p->lock, flags); | |
| used_before = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT]; | |
| if (!used_before) | |
| ret = em_sti_enable(p); | |
| if (!ret) | |
| p->active[user] = 1; | |
| raw_spin_unlock_irqrestore(&p->lock, flags); | |
| return ret; | |
| } | |
| static void em_sti_stop(struct em_sti_priv *p, unsigned int user) | |
| { | |
| unsigned long flags; | |
| int used_before, used_after; | |
| raw_spin_lock_irqsave(&p->lock, flags); | |
| used_before = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT]; | |
| p->active[user] = 0; | |
| used_after = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT]; | |
| if (used_before && !used_after) | |
| em_sti_disable(p); | |
| raw_spin_unlock_irqrestore(&p->lock, flags); | |
| } | |
| static struct em_sti_priv *cs_to_em_sti(struct clocksource *cs) | |
| { | |
| return container_of(cs, struct em_sti_priv, cs); | |
| } | |
| static cycle_t em_sti_clocksource_read(struct clocksource *cs) | |
| { | |
| return em_sti_count(cs_to_em_sti(cs)); | |
| } | |
| static int em_sti_clocksource_enable(struct clocksource *cs) | |
| { | |
| int ret; | |
| struct em_sti_priv *p = cs_to_em_sti(cs); | |
| ret = em_sti_start(p, USER_CLOCKSOURCE); | |
| if (!ret) | |
| __clocksource_update_freq_hz(cs, p->rate); | |
| return ret; | |
| } | |
| static void em_sti_clocksource_disable(struct clocksource *cs) | |
| { | |
| em_sti_stop(cs_to_em_sti(cs), USER_CLOCKSOURCE); | |
| } | |
| static void em_sti_clocksource_resume(struct clocksource *cs) | |
| { | |
| em_sti_clocksource_enable(cs); | |
| } | |
| static int em_sti_register_clocksource(struct em_sti_priv *p) | |
| { | |
| struct clocksource *cs = &p->cs; | |
| cs->name = dev_name(&p->pdev->dev); | |
| cs->rating = 200; | |
| cs->read = em_sti_clocksource_read; | |
| cs->enable = em_sti_clocksource_enable; | |
| cs->disable = em_sti_clocksource_disable; | |
| cs->suspend = em_sti_clocksource_disable; | |
| cs->resume = em_sti_clocksource_resume; | |
| cs->mask = CLOCKSOURCE_MASK(48); | |
| cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; | |
| dev_info(&p->pdev->dev, "used as clock source\n"); | |
| /* Register with dummy 1 Hz value, gets updated in ->enable() */ | |
| clocksource_register_hz(cs, 1); | |
| return 0; | |
| } | |
| static struct em_sti_priv *ced_to_em_sti(struct clock_event_device *ced) | |
| { | |
| return container_of(ced, struct em_sti_priv, ced); | |
| } | |
| static int em_sti_clock_event_shutdown(struct clock_event_device *ced) | |
| { | |
| struct em_sti_priv *p = ced_to_em_sti(ced); | |
| em_sti_stop(p, USER_CLOCKEVENT); | |
| return 0; | |
| } | |
| static int em_sti_clock_event_set_oneshot(struct clock_event_device *ced) | |
| { | |
| struct em_sti_priv *p = ced_to_em_sti(ced); | |
| dev_info(&p->pdev->dev, "used for oneshot clock events\n"); | |
| em_sti_start(p, USER_CLOCKEVENT); | |
| clockevents_config(&p->ced, p->rate); | |
| return 0; | |
| } | |
| static int em_sti_clock_event_next(unsigned long delta, | |
| struct clock_event_device *ced) | |
| { | |
| struct em_sti_priv *p = ced_to_em_sti(ced); | |
| cycle_t next; | |
| int safe; | |
| next = em_sti_set_next(p, em_sti_count(p) + delta); | |
| safe = em_sti_count(p) < (next - 1); | |
| return !safe; | |
| } | |
| static void em_sti_register_clockevent(struct em_sti_priv *p) | |
| { | |
| struct clock_event_device *ced = &p->ced; | |
| ced->name = dev_name(&p->pdev->dev); | |
| ced->features = CLOCK_EVT_FEAT_ONESHOT; | |
| ced->rating = 200; | |
| ced->cpumask = cpu_possible_mask; | |
| ced->set_next_event = em_sti_clock_event_next; | |
| ced->set_state_shutdown = em_sti_clock_event_shutdown; | |
| ced->set_state_oneshot = em_sti_clock_event_set_oneshot; | |
| dev_info(&p->pdev->dev, "used for clock events\n"); | |
| /* Register with dummy 1 Hz value, gets updated in ->set_state_oneshot() */ | |
| clockevents_config_and_register(ced, 1, 2, 0xffffffff); | |
| } | |
| static int em_sti_probe(struct platform_device *pdev) | |
| { | |
| struct em_sti_priv *p; | |
| struct resource *res; | |
| int irq; | |
| p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); | |
| if (p == NULL) | |
| return -ENOMEM; | |
| p->pdev = pdev; | |
| platform_set_drvdata(pdev, p); | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0) { | |
| dev_err(&pdev->dev, "failed to get irq\n"); | |
| return -EINVAL; | |
| } | |
| /* map memory, let base point to the STI instance */ | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| p->base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(p->base)) | |
| return PTR_ERR(p->base); | |
| /* get hold of clock */ | |
| p->clk = devm_clk_get(&pdev->dev, "sclk"); | |
| if (IS_ERR(p->clk)) { | |
| dev_err(&pdev->dev, "cannot get clock\n"); | |
| return PTR_ERR(p->clk); | |
| } | |
| if (devm_request_irq(&pdev->dev, irq, em_sti_interrupt, | |
| IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING, | |
| dev_name(&pdev->dev), p)) { | |
| dev_err(&pdev->dev, "failed to request low IRQ\n"); | |
| return -ENOENT; | |
| } | |
| raw_spin_lock_init(&p->lock); | |
| em_sti_register_clockevent(p); | |
| em_sti_register_clocksource(p); | |
| return 0; | |
| } | |
| static int em_sti_remove(struct platform_device *pdev) | |
| { | |
| return -EBUSY; /* cannot unregister clockevent and clocksource */ | |
| } | |
| static const struct of_device_id em_sti_dt_ids[] = { | |
| { .compatible = "renesas,em-sti", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, em_sti_dt_ids); | |
| static struct platform_driver em_sti_device_driver = { | |
| .probe = em_sti_probe, | |
| .remove = em_sti_remove, | |
| .driver = { | |
| .name = "em_sti", | |
| .of_match_table = em_sti_dt_ids, | |
| } | |
| }; | |
| static int __init em_sti_init(void) | |
| { | |
| return platform_driver_register(&em_sti_device_driver); | |
| } | |
| static void __exit em_sti_exit(void) | |
| { | |
| platform_driver_unregister(&em_sti_device_driver); | |
| } | |
| subsys_initcall(em_sti_init); | |
| module_exit(em_sti_exit); | |
| MODULE_AUTHOR("Magnus Damm"); | |
| MODULE_DESCRIPTION("Renesas Emma Mobile STI Timer Driver"); | |
| MODULE_LICENSE("GPL v2"); |