| /* | |
| * Amlogic Meson6 SoCs timer handling. | |
| * | |
| * Copyright (C) 2014 Carlo Caione <carlo@caione.org> | |
| * | |
| * Based on code from Amlogic, Inc | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqreturn.h> | |
| #include <linux/sched_clock.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #define CED_ID 0 | |
| #define CSD_ID 4 | |
| #define TIMER_ISA_MUX 0 | |
| #define TIMER_ISA_VAL(t) (((t) + 1) << 2) | |
| #define TIMER_INPUT_BIT(t) (2 * (t)) | |
| #define TIMER_ENABLE_BIT(t) (16 + (t)) | |
| #define TIMER_PERIODIC_BIT(t) (12 + (t)) | |
| #define TIMER_CED_INPUT_MASK (3UL << TIMER_INPUT_BIT(CED_ID)) | |
| #define TIMER_CSD_INPUT_MASK (7UL << TIMER_INPUT_BIT(CSD_ID)) | |
| #define TIMER_CED_UNIT_1US 0 | |
| #define TIMER_CSD_UNIT_1US 1 | |
| static void __iomem *timer_base; | |
| static u64 notrace meson6_timer_sched_read(void) | |
| { | |
| return (u64)readl(timer_base + TIMER_ISA_VAL(CSD_ID)); | |
| } | |
| static void meson6_clkevt_time_stop(unsigned char timer) | |
| { | |
| u32 val = readl(timer_base + TIMER_ISA_MUX); | |
| writel(val & ~TIMER_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX); | |
| } | |
| static void meson6_clkevt_time_setup(unsigned char timer, unsigned long delay) | |
| { | |
| writel(delay, timer_base + TIMER_ISA_VAL(timer)); | |
| } | |
| static void meson6_clkevt_time_start(unsigned char timer, bool periodic) | |
| { | |
| u32 val = readl(timer_base + TIMER_ISA_MUX); | |
| if (periodic) | |
| val |= TIMER_PERIODIC_BIT(timer); | |
| else | |
| val &= ~TIMER_PERIODIC_BIT(timer); | |
| writel(val | TIMER_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX); | |
| } | |
| static int meson6_shutdown(struct clock_event_device *evt) | |
| { | |
| meson6_clkevt_time_stop(CED_ID); | |
| return 0; | |
| } | |
| static int meson6_set_oneshot(struct clock_event_device *evt) | |
| { | |
| meson6_clkevt_time_stop(CED_ID); | |
| meson6_clkevt_time_start(CED_ID, false); | |
| return 0; | |
| } | |
| static int meson6_set_periodic(struct clock_event_device *evt) | |
| { | |
| meson6_clkevt_time_stop(CED_ID); | |
| meson6_clkevt_time_setup(CED_ID, USEC_PER_SEC / HZ - 1); | |
| meson6_clkevt_time_start(CED_ID, true); | |
| return 0; | |
| } | |
| static int meson6_clkevt_next_event(unsigned long evt, | |
| struct clock_event_device *unused) | |
| { | |
| meson6_clkevt_time_stop(CED_ID); | |
| meson6_clkevt_time_setup(CED_ID, evt); | |
| meson6_clkevt_time_start(CED_ID, false); | |
| return 0; | |
| } | |
| static struct clock_event_device meson6_clockevent = { | |
| .name = "meson6_tick", | |
| .rating = 400, | |
| .features = CLOCK_EVT_FEAT_PERIODIC | | |
| CLOCK_EVT_FEAT_ONESHOT, | |
| .set_state_shutdown = meson6_shutdown, | |
| .set_state_periodic = meson6_set_periodic, | |
| .set_state_oneshot = meson6_set_oneshot, | |
| .tick_resume = meson6_shutdown, | |
| .set_next_event = meson6_clkevt_next_event, | |
| }; | |
| static irqreturn_t meson6_timer_interrupt(int irq, void *dev_id) | |
| { | |
| struct clock_event_device *evt = (struct clock_event_device *)dev_id; | |
| evt->event_handler(evt); | |
| return IRQ_HANDLED; | |
| } | |
| static struct irqaction meson6_timer_irq = { | |
| .name = "meson6_timer", | |
| .flags = IRQF_TIMER | IRQF_IRQPOLL, | |
| .handler = meson6_timer_interrupt, | |
| .dev_id = &meson6_clockevent, | |
| }; | |
| static int __init meson6_timer_init(struct device_node *node) | |
| { | |
| u32 val; | |
| int ret, irq; | |
| timer_base = of_io_request_and_map(node, 0, "meson6-timer"); | |
| if (IS_ERR(timer_base)) { | |
| pr_err("Can't map registers"); | |
| return -ENXIO; | |
| } | |
| irq = irq_of_parse_and_map(node, 0); | |
| if (irq <= 0) { | |
| pr_err("Can't parse IRQ"); | |
| return -EINVAL; | |
| } | |
| /* Set 1us for timer E */ | |
| val = readl(timer_base + TIMER_ISA_MUX); | |
| val &= ~TIMER_CSD_INPUT_MASK; | |
| val |= TIMER_CSD_UNIT_1US << TIMER_INPUT_BIT(CSD_ID); | |
| writel(val, timer_base + TIMER_ISA_MUX); | |
| sched_clock_register(meson6_timer_sched_read, 32, USEC_PER_SEC); | |
| clocksource_mmio_init(timer_base + TIMER_ISA_VAL(CSD_ID), node->name, | |
| 1000 * 1000, 300, 32, clocksource_mmio_readl_up); | |
| /* Timer A base 1us */ | |
| val &= ~TIMER_CED_INPUT_MASK; | |
| val |= TIMER_CED_UNIT_1US << TIMER_INPUT_BIT(CED_ID); | |
| writel(val, timer_base + TIMER_ISA_MUX); | |
| /* Stop the timer A */ | |
| meson6_clkevt_time_stop(CED_ID); | |
| ret = setup_irq(irq, &meson6_timer_irq); | |
| if (ret) { | |
| pr_warn("failed to setup irq %d\n", irq); | |
| return ret; | |
| } | |
| meson6_clockevent.cpumask = cpu_possible_mask; | |
| meson6_clockevent.irq = irq; | |
| clockevents_config_and_register(&meson6_clockevent, USEC_PER_SEC, | |
| 1, 0xfffe); | |
| return 0; | |
| } | |
| CLOCKSOURCE_OF_DECLARE(meson6, "amlogic,meson6-timer", | |
| meson6_timer_init); |