| /* | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/cpu.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irqchip/mips-gic.h> | |
| #include <linux/notifier.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/percpu.h> | |
| #include <linux/smp.h> | |
| #include <linux/time.h> | |
| static DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device); | |
| static int gic_timer_irq; | |
| static unsigned int gic_frequency; | |
| static int gic_next_event(unsigned long delta, struct clock_event_device *evt) | |
| { | |
| u64 cnt; | |
| int res; | |
| cnt = gic_read_count(); | |
| cnt += (u64)delta; | |
| gic_write_cpu_compare(cnt, cpumask_first(evt->cpumask)); | |
| res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0; | |
| return res; | |
| } | |
| static irqreturn_t gic_compare_interrupt(int irq, void *dev_id) | |
| { | |
| struct clock_event_device *cd = dev_id; | |
| gic_write_compare(gic_read_compare()); | |
| cd->event_handler(cd); | |
| return IRQ_HANDLED; | |
| } | |
| struct irqaction gic_compare_irqaction = { | |
| .handler = gic_compare_interrupt, | |
| .percpu_dev_id = &gic_clockevent_device, | |
| .flags = IRQF_PERCPU | IRQF_TIMER, | |
| .name = "timer", | |
| }; | |
| static void gic_clockevent_cpu_init(unsigned int cpu, | |
| struct clock_event_device *cd) | |
| { | |
| cd->name = "MIPS GIC"; | |
| cd->features = CLOCK_EVT_FEAT_ONESHOT | | |
| CLOCK_EVT_FEAT_C3STOP; | |
| cd->rating = 350; | |
| cd->irq = gic_timer_irq; | |
| cd->cpumask = cpumask_of(cpu); | |
| cd->set_next_event = gic_next_event; | |
| clockevents_config_and_register(cd, gic_frequency, 0x300, 0x7fffffff); | |
| enable_percpu_irq(gic_timer_irq, IRQ_TYPE_NONE); | |
| } | |
| static void gic_clockevent_cpu_exit(struct clock_event_device *cd) | |
| { | |
| disable_percpu_irq(gic_timer_irq); | |
| } | |
| static void gic_update_frequency(void *data) | |
| { | |
| unsigned long rate = (unsigned long)data; | |
| clockevents_update_freq(this_cpu_ptr(&gic_clockevent_device), rate); | |
| } | |
| static int gic_starting_cpu(unsigned int cpu) | |
| { | |
| gic_clockevent_cpu_init(cpu, this_cpu_ptr(&gic_clockevent_device)); | |
| return 0; | |
| } | |
| static int gic_clk_notifier(struct notifier_block *nb, unsigned long action, | |
| void *data) | |
| { | |
| struct clk_notifier_data *cnd = data; | |
| if (action == POST_RATE_CHANGE) | |
| on_each_cpu(gic_update_frequency, (void *)cnd->new_rate, 1); | |
| return NOTIFY_OK; | |
| } | |
| static int gic_dying_cpu(unsigned int cpu) | |
| { | |
| gic_clockevent_cpu_exit(this_cpu_ptr(&gic_clockevent_device)); | |
| return 0; | |
| } | |
| static struct notifier_block gic_clk_nb = { | |
| .notifier_call = gic_clk_notifier, | |
| }; | |
| static int gic_clockevent_init(void) | |
| { | |
| int ret; | |
| if (!gic_frequency) | |
| return -ENXIO; | |
| ret = setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction); | |
| if (ret < 0) { | |
| pr_err("GIC timer IRQ %d setup failed: %d\n", | |
| gic_timer_irq, ret); | |
| return ret; | |
| } | |
| cpuhp_setup_state(CPUHP_AP_MIPS_GIC_TIMER_STARTING, | |
| "AP_MIPS_GIC_TIMER_STARTING", gic_starting_cpu, | |
| gic_dying_cpu); | |
| return 0; | |
| } | |
| static cycle_t gic_hpt_read(struct clocksource *cs) | |
| { | |
| return gic_read_count(); | |
| } | |
| static struct clocksource gic_clocksource = { | |
| .name = "GIC", | |
| .read = gic_hpt_read, | |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, | |
| .archdata = { .vdso_clock_mode = VDSO_CLOCK_GIC }, | |
| }; | |
| static int __init __gic_clocksource_init(void) | |
| { | |
| int ret; | |
| /* Set clocksource mask. */ | |
| gic_clocksource.mask = CLOCKSOURCE_MASK(gic_get_count_width()); | |
| /* Calculate a somewhat reasonable rating value. */ | |
| gic_clocksource.rating = 200 + gic_frequency / 10000000; | |
| ret = clocksource_register_hz(&gic_clocksource, gic_frequency); | |
| if (ret < 0) | |
| pr_warn("GIC: Unable to register clocksource\n"); | |
| return ret; | |
| } | |
| void __init gic_clocksource_init(unsigned int frequency) | |
| { | |
| gic_frequency = frequency; | |
| gic_timer_irq = MIPS_GIC_IRQ_BASE + | |
| GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_COMPARE); | |
| __gic_clocksource_init(); | |
| gic_clockevent_init(); | |
| /* And finally start the counter */ | |
| gic_start_count(); | |
| } | |
| static int __init gic_clocksource_of_init(struct device_node *node) | |
| { | |
| struct clk *clk; | |
| int ret; | |
| if (!gic_present || !node->parent || | |
| !of_device_is_compatible(node->parent, "mti,gic")) { | |
| pr_warn("No DT definition for the mips gic driver"); | |
| return -ENXIO; | |
| } | |
| clk = of_clk_get(node, 0); | |
| if (!IS_ERR(clk)) { | |
| if (clk_prepare_enable(clk) < 0) { | |
| pr_err("GIC failed to enable clock\n"); | |
| clk_put(clk); | |
| return PTR_ERR(clk); | |
| } | |
| gic_frequency = clk_get_rate(clk); | |
| } else if (of_property_read_u32(node, "clock-frequency", | |
| &gic_frequency)) { | |
| pr_err("GIC frequency not specified.\n"); | |
| return -EINVAL;; | |
| } | |
| gic_timer_irq = irq_of_parse_and_map(node, 0); | |
| if (!gic_timer_irq) { | |
| pr_err("GIC timer IRQ not specified.\n"); | |
| return -EINVAL;; | |
| } | |
| ret = __gic_clocksource_init(); | |
| if (ret) | |
| return ret; | |
| ret = gic_clockevent_init(); | |
| if (!ret && !IS_ERR(clk)) { | |
| if (clk_notifier_register(clk, &gic_clk_nb) < 0) | |
| pr_warn("GIC: Unable to register clock notifier\n"); | |
| } | |
| /* And finally start the counter */ | |
| gic_start_count(); | |
| return 0; | |
| } | |
| CLOCKSOURCE_OF_DECLARE(mips_gic_timer, "mti,gic-timer", | |
| gic_clocksource_of_init); |