| /* | |
| * MOXA ART SoCs timer handling. | |
| * | |
| * Copyright (C) 2013 Jonas Jensen | |
| * | |
| * Jonas Jensen <jonas.jensen@gmail.com> | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqreturn.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/io.h> | |
| #include <linux/clocksource.h> | |
| #include <linux/bitops.h> | |
| #include <linux/slab.h> | |
| #define TIMER1_BASE 0x00 | |
| #define TIMER2_BASE 0x10 | |
| #define TIMER3_BASE 0x20 | |
| #define REG_COUNT 0x0 /* writable */ | |
| #define REG_LOAD 0x4 | |
| #define REG_MATCH1 0x8 | |
| #define REG_MATCH2 0xC | |
| #define TIMER_CR 0x30 | |
| #define TIMER_INTR_STATE 0x34 | |
| #define TIMER_INTR_MASK 0x38 | |
| /* | |
| * Moxart TIMER_CR flags: | |
| * | |
| * MOXART_CR_*_CLOCK 0: PCLK, 1: EXT1CLK | |
| * MOXART_CR_*_INT overflow interrupt enable bit | |
| */ | |
| #define MOXART_CR_1_ENABLE BIT(0) | |
| #define MOXART_CR_1_CLOCK BIT(1) | |
| #define MOXART_CR_1_INT BIT(2) | |
| #define MOXART_CR_2_ENABLE BIT(3) | |
| #define MOXART_CR_2_CLOCK BIT(4) | |
| #define MOXART_CR_2_INT BIT(5) | |
| #define MOXART_CR_3_ENABLE BIT(6) | |
| #define MOXART_CR_3_CLOCK BIT(7) | |
| #define MOXART_CR_3_INT BIT(8) | |
| #define MOXART_CR_COUNT_UP BIT(9) | |
| #define MOXART_TIMER1_ENABLE (MOXART_CR_2_ENABLE | MOXART_CR_1_ENABLE) | |
| #define MOXART_TIMER1_DISABLE (MOXART_CR_2_ENABLE) | |
| /* | |
| * The ASpeed variant of the IP block has a different layout | |
| * for the control register | |
| */ | |
| #define ASPEED_CR_1_ENABLE BIT(0) | |
| #define ASPEED_CR_1_CLOCK BIT(1) | |
| #define ASPEED_CR_1_INT BIT(2) | |
| #define ASPEED_CR_2_ENABLE BIT(4) | |
| #define ASPEED_CR_2_CLOCK BIT(5) | |
| #define ASPEED_CR_2_INT BIT(6) | |
| #define ASPEED_CR_3_ENABLE BIT(8) | |
| #define ASPEED_CR_3_CLOCK BIT(9) | |
| #define ASPEED_CR_3_INT BIT(10) | |
| #define ASPEED_TIMER1_ENABLE (ASPEED_CR_2_ENABLE | ASPEED_CR_1_ENABLE) | |
| #define ASPEED_TIMER1_DISABLE (ASPEED_CR_2_ENABLE) | |
| struct moxart_timer { | |
| void __iomem *base; | |
| unsigned int t1_disable_val; | |
| unsigned int t1_enable_val; | |
| unsigned int count_per_tick; | |
| struct clock_event_device clkevt; | |
| }; | |
| static inline struct moxart_timer *to_moxart(struct clock_event_device *evt) | |
| { | |
| return container_of(evt, struct moxart_timer, clkevt); | |
| } | |
| static inline void moxart_disable(struct clock_event_device *evt) | |
| { | |
| struct moxart_timer *timer = to_moxart(evt); | |
| writel(timer->t1_disable_val, timer->base + TIMER_CR); | |
| } | |
| static inline void moxart_enable(struct clock_event_device *evt) | |
| { | |
| struct moxart_timer *timer = to_moxart(evt); | |
| writel(timer->t1_enable_val, timer->base + TIMER_CR); | |
| } | |
| static int moxart_shutdown(struct clock_event_device *evt) | |
| { | |
| moxart_disable(evt); | |
| return 0; | |
| } | |
| static int moxart_set_oneshot(struct clock_event_device *evt) | |
| { | |
| moxart_disable(evt); | |
| writel(~0, to_moxart(evt)->base + TIMER1_BASE + REG_LOAD); | |
| return 0; | |
| } | |
| static int moxart_set_periodic(struct clock_event_device *evt) | |
| { | |
| struct moxart_timer *timer = to_moxart(evt); | |
| moxart_disable(evt); | |
| writel(timer->count_per_tick, timer->base + TIMER1_BASE + REG_LOAD); | |
| writel(0, timer->base + TIMER1_BASE + REG_MATCH1); | |
| moxart_enable(evt); | |
| return 0; | |
| } | |
| static int moxart_clkevt_next_event(unsigned long cycles, | |
| struct clock_event_device *evt) | |
| { | |
| struct moxart_timer *timer = to_moxart(evt); | |
| u32 u; | |
| moxart_disable(evt); | |
| u = readl(timer->base + TIMER1_BASE + REG_COUNT) - cycles; | |
| writel(u, timer->base + TIMER1_BASE + REG_MATCH1); | |
| moxart_enable(evt); | |
| return 0; | |
| } | |
| static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id) | |
| { | |
| struct clock_event_device *evt = dev_id; | |
| evt->event_handler(evt); | |
| return IRQ_HANDLED; | |
| } | |
| static int __init moxart_timer_init(struct device_node *node) | |
| { | |
| int ret, irq; | |
| unsigned long pclk; | |
| struct clk *clk; | |
| struct moxart_timer *timer; | |
| timer = kzalloc(sizeof(*timer), GFP_KERNEL); | |
| if (!timer) | |
| return -ENOMEM; | |
| timer->base = of_iomap(node, 0); | |
| if (!timer->base) { | |
| pr_err("%s: of_iomap failed\n", node->full_name); | |
| return -ENXIO; | |
| } | |
| irq = irq_of_parse_and_map(node, 0); | |
| if (irq <= 0) { | |
| pr_err("%s: irq_of_parse_and_map failed\n", node->full_name); | |
| return -EINVAL; | |
| } | |
| clk = of_clk_get(node, 0); | |
| if (IS_ERR(clk)) { | |
| pr_err("%s: of_clk_get failed\n", node->full_name); | |
| return PTR_ERR(clk); | |
| } | |
| pclk = clk_get_rate(clk); | |
| if (of_device_is_compatible(node, "moxa,moxart-timer")) { | |
| timer->t1_enable_val = MOXART_TIMER1_ENABLE; | |
| timer->t1_disable_val = MOXART_TIMER1_DISABLE; | |
| } else if (of_device_is_compatible(node, "aspeed,ast2400-timer")) { | |
| timer->t1_enable_val = ASPEED_TIMER1_ENABLE; | |
| timer->t1_disable_val = ASPEED_TIMER1_DISABLE; | |
| } else { | |
| pr_err("%s: unknown platform\n", node->full_name); | |
| return -EINVAL; | |
| } | |
| timer->count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ); | |
| timer->clkevt.name = node->name; | |
| timer->clkevt.rating = 200; | |
| timer->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | | |
| CLOCK_EVT_FEAT_ONESHOT; | |
| timer->clkevt.set_state_shutdown = moxart_shutdown; | |
| timer->clkevt.set_state_periodic = moxart_set_periodic; | |
| timer->clkevt.set_state_oneshot = moxart_set_oneshot; | |
| timer->clkevt.tick_resume = moxart_set_oneshot; | |
| timer->clkevt.set_next_event = moxart_clkevt_next_event; | |
| timer->clkevt.cpumask = cpumask_of(0); | |
| timer->clkevt.irq = irq; | |
| ret = clocksource_mmio_init(timer->base + TIMER2_BASE + REG_COUNT, | |
| "moxart_timer", pclk, 200, 32, | |
| clocksource_mmio_readl_down); | |
| if (ret) { | |
| pr_err("%s: clocksource_mmio_init failed\n", node->full_name); | |
| return ret; | |
| } | |
| ret = request_irq(irq, moxart_timer_interrupt, IRQF_TIMER, | |
| node->name, &timer->clkevt); | |
| if (ret) { | |
| pr_err("%s: setup_irq failed\n", node->full_name); | |
| return ret; | |
| } | |
| /* Clear match registers */ | |
| writel(0, timer->base + TIMER1_BASE + REG_MATCH1); | |
| writel(0, timer->base + TIMER1_BASE + REG_MATCH2); | |
| writel(0, timer->base + TIMER2_BASE + REG_MATCH1); | |
| writel(0, timer->base + TIMER2_BASE + REG_MATCH2); | |
| /* | |
| * Start timer 2 rolling as our main wall clock source, keep timer 1 | |
| * disabled | |
| */ | |
| writel(0, timer->base + TIMER_CR); | |
| writel(~0, timer->base + TIMER2_BASE + REG_LOAD); | |
| writel(timer->t1_disable_val, timer->base + TIMER_CR); | |
| /* | |
| * documentation is not publicly available: | |
| * min_delta / max_delta obtained by trial-and-error, | |
| * max_delta 0xfffffffe should be ok because count | |
| * register size is u32 | |
| */ | |
| clockevents_config_and_register(&timer->clkevt, pclk, 0x4, 0xfffffffe); | |
| return 0; | |
| } | |
| CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init); | |
| CLOCKSOURCE_OF_DECLARE(aspeed, "aspeed,ast2400-timer", moxart_timer_init); |