| /* | |
| * drivers/cpufreq/cpufreq_ondemand.c | |
| * | |
| * Copyright (C) 2001 Russell King | |
| * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. | |
| * Jun Nakajima <jun.nakajima@intel.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/cpu.h> | |
| #include <linux/percpu-defs.h> | |
| #include <linux/slab.h> | |
| #include <linux/tick.h> | |
| #include "cpufreq_ondemand.h" | |
| /* On-demand governor macros */ | |
| #define DEF_FREQUENCY_UP_THRESHOLD (80) | |
| #define DEF_SAMPLING_DOWN_FACTOR (1) | |
| #define MAX_SAMPLING_DOWN_FACTOR (100000) | |
| #define MICRO_FREQUENCY_UP_THRESHOLD (95) | |
| #define MICRO_FREQUENCY_MIN_SAMPLE_RATE (10000) | |
| #define MIN_FREQUENCY_UP_THRESHOLD (11) | |
| #define MAX_FREQUENCY_UP_THRESHOLD (100) | |
| static struct od_ops od_ops; | |
| static unsigned int default_powersave_bias; | |
| /* | |
| * Not all CPUs want IO time to be accounted as busy; this depends on how | |
| * efficient idling at a higher frequency/voltage is. | |
| * Pavel Machek says this is not so for various generations of AMD and old | |
| * Intel systems. | |
| * Mike Chan (android.com) claims this is also not true for ARM. | |
| * Because of this, whitelist specific known (series) of CPUs by default, and | |
| * leave all others up to the user. | |
| */ | |
| static int should_io_be_busy(void) | |
| { | |
| #if defined(CONFIG_X86) | |
| /* | |
| * For Intel, Core 2 (model 15) and later have an efficient idle. | |
| */ | |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && | |
| boot_cpu_data.x86 == 6 && | |
| boot_cpu_data.x86_model >= 15) | |
| return 1; | |
| #endif | |
| return 0; | |
| } | |
| /* | |
| * Find right freq to be set now with powersave_bias on. | |
| * Returns the freq_hi to be used right now and will set freq_hi_delay_us, | |
| * freq_lo, and freq_lo_delay_us in percpu area for averaging freqs. | |
| */ | |
| static unsigned int generic_powersave_bias_target(struct cpufreq_policy *policy, | |
| unsigned int freq_next, unsigned int relation) | |
| { | |
| unsigned int freq_req, freq_reduc, freq_avg; | |
| unsigned int freq_hi, freq_lo; | |
| unsigned int index; | |
| unsigned int delay_hi_us; | |
| struct policy_dbs_info *policy_dbs = policy->governor_data; | |
| struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); | |
| struct dbs_data *dbs_data = policy_dbs->dbs_data; | |
| struct od_dbs_tuners *od_tuners = dbs_data->tuners; | |
| struct cpufreq_frequency_table *freq_table = policy->freq_table; | |
| if (!freq_table) { | |
| dbs_info->freq_lo = 0; | |
| dbs_info->freq_lo_delay_us = 0; | |
| return freq_next; | |
| } | |
| index = cpufreq_frequency_table_target(policy, freq_next, relation); | |
| freq_req = freq_table[index].frequency; | |
| freq_reduc = freq_req * od_tuners->powersave_bias / 1000; | |
| freq_avg = freq_req - freq_reduc; | |
| /* Find freq bounds for freq_avg in freq_table */ | |
| index = cpufreq_table_find_index_h(policy, freq_avg); | |
| freq_lo = freq_table[index].frequency; | |
| index = cpufreq_table_find_index_l(policy, freq_avg); | |
| freq_hi = freq_table[index].frequency; | |
| /* Find out how long we have to be in hi and lo freqs */ | |
| if (freq_hi == freq_lo) { | |
| dbs_info->freq_lo = 0; | |
| dbs_info->freq_lo_delay_us = 0; | |
| return freq_lo; | |
| } | |
| delay_hi_us = (freq_avg - freq_lo) * dbs_data->sampling_rate; | |
| delay_hi_us += (freq_hi - freq_lo) / 2; | |
| delay_hi_us /= freq_hi - freq_lo; | |
| dbs_info->freq_hi_delay_us = delay_hi_us; | |
| dbs_info->freq_lo = freq_lo; | |
| dbs_info->freq_lo_delay_us = dbs_data->sampling_rate - delay_hi_us; | |
| return freq_hi; | |
| } | |
| static void ondemand_powersave_bias_init(struct cpufreq_policy *policy) | |
| { | |
| struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data); | |
| dbs_info->freq_lo = 0; | |
| } | |
| static void dbs_freq_increase(struct cpufreq_policy *policy, unsigned int freq) | |
| { | |
| struct policy_dbs_info *policy_dbs = policy->governor_data; | |
| struct dbs_data *dbs_data = policy_dbs->dbs_data; | |
| struct od_dbs_tuners *od_tuners = dbs_data->tuners; | |
| if (od_tuners->powersave_bias) | |
| freq = od_ops.powersave_bias_target(policy, freq, | |
| CPUFREQ_RELATION_H); | |
| else if (policy->cur == policy->max) | |
| return; | |
| __cpufreq_driver_target(policy, freq, od_tuners->powersave_bias ? | |
| CPUFREQ_RELATION_L : CPUFREQ_RELATION_H); | |
| } | |
| /* | |
| * Every sampling_rate, we check, if current idle time is less than 20% | |
| * (default), then we try to increase frequency. Else, we adjust the frequency | |
| * proportional to load. | |
| */ | |
| static void od_update(struct cpufreq_policy *policy) | |
| { | |
| struct policy_dbs_info *policy_dbs = policy->governor_data; | |
| struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); | |
| struct dbs_data *dbs_data = policy_dbs->dbs_data; | |
| struct od_dbs_tuners *od_tuners = dbs_data->tuners; | |
| unsigned int load = dbs_update(policy); | |
| dbs_info->freq_lo = 0; | |
| /* Check for frequency increase */ | |
| if (load > dbs_data->up_threshold) { | |
| /* If switching to max speed, apply sampling_down_factor */ | |
| if (policy->cur < policy->max) | |
| policy_dbs->rate_mult = dbs_data->sampling_down_factor; | |
| dbs_freq_increase(policy, policy->max); | |
| } else { | |
| /* Calculate the next frequency proportional to load */ | |
| unsigned int freq_next, min_f, max_f; | |
| min_f = policy->cpuinfo.min_freq; | |
| max_f = policy->cpuinfo.max_freq; | |
| freq_next = min_f + load * (max_f - min_f) / 100; | |
| /* No longer fully busy, reset rate_mult */ | |
| policy_dbs->rate_mult = 1; | |
| if (od_tuners->powersave_bias) | |
| freq_next = od_ops.powersave_bias_target(policy, | |
| freq_next, | |
| CPUFREQ_RELATION_L); | |
| __cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_C); | |
| } | |
| } | |
| static unsigned int od_dbs_timer(struct cpufreq_policy *policy) | |
| { | |
| struct policy_dbs_info *policy_dbs = policy->governor_data; | |
| struct dbs_data *dbs_data = policy_dbs->dbs_data; | |
| struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); | |
| int sample_type = dbs_info->sample_type; | |
| /* Common NORMAL_SAMPLE setup */ | |
| dbs_info->sample_type = OD_NORMAL_SAMPLE; | |
| /* | |
| * OD_SUB_SAMPLE doesn't make sense if sample_delay_ns is 0, so ignore | |
| * it then. | |
| */ | |
| if (sample_type == OD_SUB_SAMPLE && policy_dbs->sample_delay_ns > 0) { | |
| __cpufreq_driver_target(policy, dbs_info->freq_lo, | |
| CPUFREQ_RELATION_H); | |
| return dbs_info->freq_lo_delay_us; | |
| } | |
| od_update(policy); | |
| if (dbs_info->freq_lo) { | |
| /* Setup timer for SUB_SAMPLE */ | |
| dbs_info->sample_type = OD_SUB_SAMPLE; | |
| return dbs_info->freq_hi_delay_us; | |
| } | |
| return dbs_data->sampling_rate * policy_dbs->rate_mult; | |
| } | |
| /************************** sysfs interface ************************/ | |
| static struct dbs_governor od_dbs_gov; | |
| static ssize_t store_io_is_busy(struct gov_attr_set *attr_set, const char *buf, | |
| size_t count) | |
| { | |
| struct dbs_data *dbs_data = to_dbs_data(attr_set); | |
| unsigned int input; | |
| int ret; | |
| ret = sscanf(buf, "%u", &input); | |
| if (ret != 1) | |
| return -EINVAL; | |
| dbs_data->io_is_busy = !!input; | |
| /* we need to re-evaluate prev_cpu_idle */ | |
| gov_update_cpu_data(dbs_data); | |
| return count; | |
| } | |
| static ssize_t store_up_threshold(struct gov_attr_set *attr_set, | |
| const char *buf, size_t count) | |
| { | |
| struct dbs_data *dbs_data = to_dbs_data(attr_set); | |
| unsigned int input; | |
| int ret; | |
| ret = sscanf(buf, "%u", &input); | |
| if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || | |
| input < MIN_FREQUENCY_UP_THRESHOLD) { | |
| return -EINVAL; | |
| } | |
| dbs_data->up_threshold = input; | |
| return count; | |
| } | |
| static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set, | |
| const char *buf, size_t count) | |
| { | |
| struct dbs_data *dbs_data = to_dbs_data(attr_set); | |
| struct policy_dbs_info *policy_dbs; | |
| unsigned int input; | |
| int ret; | |
| ret = sscanf(buf, "%u", &input); | |
| if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1) | |
| return -EINVAL; | |
| dbs_data->sampling_down_factor = input; | |
| /* Reset down sampling multiplier in case it was active */ | |
| list_for_each_entry(policy_dbs, &attr_set->policy_list, list) { | |
| /* | |
| * Doing this without locking might lead to using different | |
| * rate_mult values in od_update() and od_dbs_timer(). | |
| */ | |
| mutex_lock(&policy_dbs->timer_mutex); | |
| policy_dbs->rate_mult = 1; | |
| mutex_unlock(&policy_dbs->timer_mutex); | |
| } | |
| return count; | |
| } | |
| static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set, | |
| const char *buf, size_t count) | |
| { | |
| struct dbs_data *dbs_data = to_dbs_data(attr_set); | |
| unsigned int input; | |
| int ret; | |
| ret = sscanf(buf, "%u", &input); | |
| if (ret != 1) | |
| return -EINVAL; | |
| if (input > 1) | |
| input = 1; | |
| if (input == dbs_data->ignore_nice_load) { /* nothing to do */ | |
| return count; | |
| } | |
| dbs_data->ignore_nice_load = input; | |
| /* we need to re-evaluate prev_cpu_idle */ | |
| gov_update_cpu_data(dbs_data); | |
| return count; | |
| } | |
| static ssize_t store_powersave_bias(struct gov_attr_set *attr_set, | |
| const char *buf, size_t count) | |
| { | |
| struct dbs_data *dbs_data = to_dbs_data(attr_set); | |
| struct od_dbs_tuners *od_tuners = dbs_data->tuners; | |
| struct policy_dbs_info *policy_dbs; | |
| unsigned int input; | |
| int ret; | |
| ret = sscanf(buf, "%u", &input); | |
| if (ret != 1) | |
| return -EINVAL; | |
| if (input > 1000) | |
| input = 1000; | |
| od_tuners->powersave_bias = input; | |
| list_for_each_entry(policy_dbs, &attr_set->policy_list, list) | |
| ondemand_powersave_bias_init(policy_dbs->policy); | |
| return count; | |
| } | |
| gov_show_one_common(sampling_rate); | |
| gov_show_one_common(up_threshold); | |
| gov_show_one_common(sampling_down_factor); | |
| gov_show_one_common(ignore_nice_load); | |
| gov_show_one_common(min_sampling_rate); | |
| gov_show_one_common(io_is_busy); | |
| gov_show_one(od, powersave_bias); | |
| gov_attr_rw(sampling_rate); | |
| gov_attr_rw(io_is_busy); | |
| gov_attr_rw(up_threshold); | |
| gov_attr_rw(sampling_down_factor); | |
| gov_attr_rw(ignore_nice_load); | |
| gov_attr_rw(powersave_bias); | |
| gov_attr_ro(min_sampling_rate); | |
| static struct attribute *od_attributes[] = { | |
| &min_sampling_rate.attr, | |
| &sampling_rate.attr, | |
| &up_threshold.attr, | |
| &sampling_down_factor.attr, | |
| &ignore_nice_load.attr, | |
| &powersave_bias.attr, | |
| &io_is_busy.attr, | |
| NULL | |
| }; | |
| /************************** sysfs end ************************/ | |
| static struct policy_dbs_info *od_alloc(void) | |
| { | |
| struct od_policy_dbs_info *dbs_info; | |
| dbs_info = kzalloc(sizeof(*dbs_info), GFP_KERNEL); | |
| return dbs_info ? &dbs_info->policy_dbs : NULL; | |
| } | |
| static void od_free(struct policy_dbs_info *policy_dbs) | |
| { | |
| kfree(to_dbs_info(policy_dbs)); | |
| } | |
| static int od_init(struct dbs_data *dbs_data) | |
| { | |
| struct od_dbs_tuners *tuners; | |
| u64 idle_time; | |
| int cpu; | |
| tuners = kzalloc(sizeof(*tuners), GFP_KERNEL); | |
| if (!tuners) | |
| return -ENOMEM; | |
| cpu = get_cpu(); | |
| idle_time = get_cpu_idle_time_us(cpu, NULL); | |
| put_cpu(); | |
| if (idle_time != -1ULL) { | |
| /* Idle micro accounting is supported. Use finer thresholds */ | |
| dbs_data->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD; | |
| /* | |
| * In nohz/micro accounting case we set the minimum frequency | |
| * not depending on HZ, but fixed (very low). The deferred | |
| * timer might skip some samples if idle/sleeping as needed. | |
| */ | |
| dbs_data->min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE; | |
| } else { | |
| dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD; | |
| /* For correct statistics, we need 10 ticks for each measure */ | |
| dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO * | |
| jiffies_to_usecs(10); | |
| } | |
| dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; | |
| dbs_data->ignore_nice_load = 0; | |
| tuners->powersave_bias = default_powersave_bias; | |
| dbs_data->io_is_busy = should_io_be_busy(); | |
| dbs_data->tuners = tuners; | |
| return 0; | |
| } | |
| static void od_exit(struct dbs_data *dbs_data) | |
| { | |
| kfree(dbs_data->tuners); | |
| } | |
| static void od_start(struct cpufreq_policy *policy) | |
| { | |
| struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data); | |
| dbs_info->sample_type = OD_NORMAL_SAMPLE; | |
| ondemand_powersave_bias_init(policy); | |
| } | |
| static struct od_ops od_ops = { | |
| .powersave_bias_target = generic_powersave_bias_target, | |
| }; | |
| static struct dbs_governor od_dbs_gov = { | |
| .gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("ondemand"), | |
| .kobj_type = { .default_attrs = od_attributes }, | |
| .gov_dbs_timer = od_dbs_timer, | |
| .alloc = od_alloc, | |
| .free = od_free, | |
| .init = od_init, | |
| .exit = od_exit, | |
| .start = od_start, | |
| }; | |
| #define CPU_FREQ_GOV_ONDEMAND (&od_dbs_gov.gov) | |
| static void od_set_powersave_bias(unsigned int powersave_bias) | |
| { | |
| unsigned int cpu; | |
| cpumask_t done; | |
| default_powersave_bias = powersave_bias; | |
| cpumask_clear(&done); | |
| get_online_cpus(); | |
| for_each_online_cpu(cpu) { | |
| struct cpufreq_policy *policy; | |
| struct policy_dbs_info *policy_dbs; | |
| struct dbs_data *dbs_data; | |
| struct od_dbs_tuners *od_tuners; | |
| if (cpumask_test_cpu(cpu, &done)) | |
| continue; | |
| policy = cpufreq_cpu_get_raw(cpu); | |
| if (!policy || policy->governor != CPU_FREQ_GOV_ONDEMAND) | |
| continue; | |
| policy_dbs = policy->governor_data; | |
| if (!policy_dbs) | |
| continue; | |
| cpumask_or(&done, &done, policy->cpus); | |
| dbs_data = policy_dbs->dbs_data; | |
| od_tuners = dbs_data->tuners; | |
| od_tuners->powersave_bias = default_powersave_bias; | |
| } | |
| put_online_cpus(); | |
| } | |
| void od_register_powersave_bias_handler(unsigned int (*f) | |
| (struct cpufreq_policy *, unsigned int, unsigned int), | |
| unsigned int powersave_bias) | |
| { | |
| od_ops.powersave_bias_target = f; | |
| od_set_powersave_bias(powersave_bias); | |
| } | |
| EXPORT_SYMBOL_GPL(od_register_powersave_bias_handler); | |
| void od_unregister_powersave_bias_handler(void) | |
| { | |
| od_ops.powersave_bias_target = generic_powersave_bias_target; | |
| od_set_powersave_bias(0); | |
| } | |
| EXPORT_SYMBOL_GPL(od_unregister_powersave_bias_handler); | |
| static int __init cpufreq_gov_dbs_init(void) | |
| { | |
| return cpufreq_register_governor(CPU_FREQ_GOV_ONDEMAND); | |
| } | |
| static void __exit cpufreq_gov_dbs_exit(void) | |
| { | |
| cpufreq_unregister_governor(CPU_FREQ_GOV_ONDEMAND); | |
| } | |
| MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>"); | |
| MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>"); | |
| MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for " | |
| "Low Latency Frequency Transition capable processors"); | |
| MODULE_LICENSE("GPL"); | |
| #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND | |
| struct cpufreq_governor *cpufreq_default_governor(void) | |
| { | |
| return CPU_FREQ_GOV_ONDEMAND; | |
| } | |
| fs_initcall(cpufreq_gov_dbs_init); | |
| #else | |
| module_init(cpufreq_gov_dbs_init); | |
| #endif | |
| module_exit(cpufreq_gov_dbs_exit); |