| /* | |
| * Cryptographic API. | |
| * | |
| * Support for ATMEL SHA1/SHA256 HW acceleration. | |
| * | |
| * Copyright (c) 2012 Eukréa Electromatique - ATMEL | |
| * Author: Nicolas Royer <nicolas@eukrea.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as published | |
| * by the Free Software Foundation. | |
| * | |
| * Some ideas are from omap-sham.c drivers. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/err.h> | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/hw_random.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/device.h> | |
| #include <linux/init.h> | |
| #include <linux/errno.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/of_device.h> | |
| #include <linux/delay.h> | |
| #include <linux/crypto.h> | |
| #include <linux/cryptohash.h> | |
| #include <crypto/scatterwalk.h> | |
| #include <crypto/algapi.h> | |
| #include <crypto/sha.h> | |
| #include <crypto/hash.h> | |
| #include <crypto/internal/hash.h> | |
| #include <linux/platform_data/crypto-atmel.h> | |
| #include "atmel-sha-regs.h" | |
| /* SHA flags */ | |
| #define SHA_FLAGS_BUSY BIT(0) | |
| #define SHA_FLAGS_FINAL BIT(1) | |
| #define SHA_FLAGS_DMA_ACTIVE BIT(2) | |
| #define SHA_FLAGS_OUTPUT_READY BIT(3) | |
| #define SHA_FLAGS_INIT BIT(4) | |
| #define SHA_FLAGS_CPU BIT(5) | |
| #define SHA_FLAGS_DMA_READY BIT(6) | |
| #define SHA_FLAGS_FINUP BIT(16) | |
| #define SHA_FLAGS_SG BIT(17) | |
| #define SHA_FLAGS_ALGO_MASK GENMASK(22, 18) | |
| #define SHA_FLAGS_SHA1 BIT(18) | |
| #define SHA_FLAGS_SHA224 BIT(19) | |
| #define SHA_FLAGS_SHA256 BIT(20) | |
| #define SHA_FLAGS_SHA384 BIT(21) | |
| #define SHA_FLAGS_SHA512 BIT(22) | |
| #define SHA_FLAGS_ERROR BIT(23) | |
| #define SHA_FLAGS_PAD BIT(24) | |
| #define SHA_FLAGS_RESTORE BIT(25) | |
| #define SHA_OP_UPDATE 1 | |
| #define SHA_OP_FINAL 2 | |
| #define SHA_BUFFER_LEN (PAGE_SIZE / 16) | |
| #define ATMEL_SHA_DMA_THRESHOLD 56 | |
| struct atmel_sha_caps { | |
| bool has_dma; | |
| bool has_dualbuff; | |
| bool has_sha224; | |
| bool has_sha_384_512; | |
| bool has_uihv; | |
| }; | |
| struct atmel_sha_dev; | |
| /* | |
| * .statesize = sizeof(struct atmel_sha_reqctx) must be <= PAGE_SIZE / 8 as | |
| * tested by the ahash_prepare_alg() function. | |
| */ | |
| struct atmel_sha_reqctx { | |
| struct atmel_sha_dev *dd; | |
| unsigned long flags; | |
| unsigned long op; | |
| u8 digest[SHA512_DIGEST_SIZE] __aligned(sizeof(u32)); | |
| u64 digcnt[2]; | |
| size_t bufcnt; | |
| size_t buflen; | |
| dma_addr_t dma_addr; | |
| /* walk state */ | |
| struct scatterlist *sg; | |
| unsigned int offset; /* offset in current sg */ | |
| unsigned int total; /* total request */ | |
| size_t block_size; | |
| u8 buffer[SHA_BUFFER_LEN + SHA512_BLOCK_SIZE] __aligned(sizeof(u32)); | |
| }; | |
| struct atmel_sha_ctx { | |
| struct atmel_sha_dev *dd; | |
| unsigned long flags; | |
| }; | |
| #define ATMEL_SHA_QUEUE_LENGTH 50 | |
| struct atmel_sha_dma { | |
| struct dma_chan *chan; | |
| struct dma_slave_config dma_conf; | |
| }; | |
| struct atmel_sha_dev { | |
| struct list_head list; | |
| unsigned long phys_base; | |
| struct device *dev; | |
| struct clk *iclk; | |
| int irq; | |
| void __iomem *io_base; | |
| spinlock_t lock; | |
| int err; | |
| struct tasklet_struct done_task; | |
| struct tasklet_struct queue_task; | |
| unsigned long flags; | |
| struct crypto_queue queue; | |
| struct ahash_request *req; | |
| struct atmel_sha_dma dma_lch_in; | |
| struct atmel_sha_caps caps; | |
| u32 hw_version; | |
| }; | |
| struct atmel_sha_drv { | |
| struct list_head dev_list; | |
| spinlock_t lock; | |
| }; | |
| static struct atmel_sha_drv atmel_sha = { | |
| .dev_list = LIST_HEAD_INIT(atmel_sha.dev_list), | |
| .lock = __SPIN_LOCK_UNLOCKED(atmel_sha.lock), | |
| }; | |
| static inline u32 atmel_sha_read(struct atmel_sha_dev *dd, u32 offset) | |
| { | |
| return readl_relaxed(dd->io_base + offset); | |
| } | |
| static inline void atmel_sha_write(struct atmel_sha_dev *dd, | |
| u32 offset, u32 value) | |
| { | |
| writel_relaxed(value, dd->io_base + offset); | |
| } | |
| static size_t atmel_sha_append_sg(struct atmel_sha_reqctx *ctx) | |
| { | |
| size_t count; | |
| while ((ctx->bufcnt < ctx->buflen) && ctx->total) { | |
| count = min(ctx->sg->length - ctx->offset, ctx->total); | |
| count = min(count, ctx->buflen - ctx->bufcnt); | |
| if (count <= 0) { | |
| /* | |
| * Check if count <= 0 because the buffer is full or | |
| * because the sg length is 0. In the latest case, | |
| * check if there is another sg in the list, a 0 length | |
| * sg doesn't necessarily mean the end of the sg list. | |
| */ | |
| if ((ctx->sg->length == 0) && !sg_is_last(ctx->sg)) { | |
| ctx->sg = sg_next(ctx->sg); | |
| continue; | |
| } else { | |
| break; | |
| } | |
| } | |
| scatterwalk_map_and_copy(ctx->buffer + ctx->bufcnt, ctx->sg, | |
| ctx->offset, count, 0); | |
| ctx->bufcnt += count; | |
| ctx->offset += count; | |
| ctx->total -= count; | |
| if (ctx->offset == ctx->sg->length) { | |
| ctx->sg = sg_next(ctx->sg); | |
| if (ctx->sg) | |
| ctx->offset = 0; | |
| else | |
| ctx->total = 0; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * The purpose of this padding is to ensure that the padded message is a | |
| * multiple of 512 bits (SHA1/SHA224/SHA256) or 1024 bits (SHA384/SHA512). | |
| * The bit "1" is appended at the end of the message followed by | |
| * "padlen-1" zero bits. Then a 64 bits block (SHA1/SHA224/SHA256) or | |
| * 128 bits block (SHA384/SHA512) equals to the message length in bits | |
| * is appended. | |
| * | |
| * For SHA1/SHA224/SHA256, padlen is calculated as followed: | |
| * - if message length < 56 bytes then padlen = 56 - message length | |
| * - else padlen = 64 + 56 - message length | |
| * | |
| * For SHA384/SHA512, padlen is calculated as followed: | |
| * - if message length < 112 bytes then padlen = 112 - message length | |
| * - else padlen = 128 + 112 - message length | |
| */ | |
| static void atmel_sha_fill_padding(struct atmel_sha_reqctx *ctx, int length) | |
| { | |
| unsigned int index, padlen; | |
| u64 bits[2]; | |
| u64 size[2]; | |
| size[0] = ctx->digcnt[0]; | |
| size[1] = ctx->digcnt[1]; | |
| size[0] += ctx->bufcnt; | |
| if (size[0] < ctx->bufcnt) | |
| size[1]++; | |
| size[0] += length; | |
| if (size[0] < length) | |
| size[1]++; | |
| bits[1] = cpu_to_be64(size[0] << 3); | |
| bits[0] = cpu_to_be64(size[1] << 3 | size[0] >> 61); | |
| if (ctx->flags & (SHA_FLAGS_SHA384 | SHA_FLAGS_SHA512)) { | |
| index = ctx->bufcnt & 0x7f; | |
| padlen = (index < 112) ? (112 - index) : ((128+112) - index); | |
| *(ctx->buffer + ctx->bufcnt) = 0x80; | |
| memset(ctx->buffer + ctx->bufcnt + 1, 0, padlen-1); | |
| memcpy(ctx->buffer + ctx->bufcnt + padlen, bits, 16); | |
| ctx->bufcnt += padlen + 16; | |
| ctx->flags |= SHA_FLAGS_PAD; | |
| } else { | |
| index = ctx->bufcnt & 0x3f; | |
| padlen = (index < 56) ? (56 - index) : ((64+56) - index); | |
| *(ctx->buffer + ctx->bufcnt) = 0x80; | |
| memset(ctx->buffer + ctx->bufcnt + 1, 0, padlen-1); | |
| memcpy(ctx->buffer + ctx->bufcnt + padlen, &bits[1], 8); | |
| ctx->bufcnt += padlen + 8; | |
| ctx->flags |= SHA_FLAGS_PAD; | |
| } | |
| } | |
| static int atmel_sha_init(struct ahash_request *req) | |
| { | |
| struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); | |
| struct atmel_sha_ctx *tctx = crypto_ahash_ctx(tfm); | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| struct atmel_sha_dev *dd = NULL; | |
| struct atmel_sha_dev *tmp; | |
| spin_lock_bh(&atmel_sha.lock); | |
| if (!tctx->dd) { | |
| list_for_each_entry(tmp, &atmel_sha.dev_list, list) { | |
| dd = tmp; | |
| break; | |
| } | |
| tctx->dd = dd; | |
| } else { | |
| dd = tctx->dd; | |
| } | |
| spin_unlock_bh(&atmel_sha.lock); | |
| ctx->dd = dd; | |
| ctx->flags = 0; | |
| dev_dbg(dd->dev, "init: digest size: %d\n", | |
| crypto_ahash_digestsize(tfm)); | |
| switch (crypto_ahash_digestsize(tfm)) { | |
| case SHA1_DIGEST_SIZE: | |
| ctx->flags |= SHA_FLAGS_SHA1; | |
| ctx->block_size = SHA1_BLOCK_SIZE; | |
| break; | |
| case SHA224_DIGEST_SIZE: | |
| ctx->flags |= SHA_FLAGS_SHA224; | |
| ctx->block_size = SHA224_BLOCK_SIZE; | |
| break; | |
| case SHA256_DIGEST_SIZE: | |
| ctx->flags |= SHA_FLAGS_SHA256; | |
| ctx->block_size = SHA256_BLOCK_SIZE; | |
| break; | |
| case SHA384_DIGEST_SIZE: | |
| ctx->flags |= SHA_FLAGS_SHA384; | |
| ctx->block_size = SHA384_BLOCK_SIZE; | |
| break; | |
| case SHA512_DIGEST_SIZE: | |
| ctx->flags |= SHA_FLAGS_SHA512; | |
| ctx->block_size = SHA512_BLOCK_SIZE; | |
| break; | |
| default: | |
| return -EINVAL; | |
| break; | |
| } | |
| ctx->bufcnt = 0; | |
| ctx->digcnt[0] = 0; | |
| ctx->digcnt[1] = 0; | |
| ctx->buflen = SHA_BUFFER_LEN; | |
| return 0; | |
| } | |
| static void atmel_sha_write_ctrl(struct atmel_sha_dev *dd, int dma) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req); | |
| u32 valmr = SHA_MR_MODE_AUTO; | |
| unsigned int i, hashsize = 0; | |
| if (likely(dma)) { | |
| if (!dd->caps.has_dma) | |
| atmel_sha_write(dd, SHA_IER, SHA_INT_TXBUFE); | |
| valmr = SHA_MR_MODE_PDC; | |
| if (dd->caps.has_dualbuff) | |
| valmr |= SHA_MR_DUALBUFF; | |
| } else { | |
| atmel_sha_write(dd, SHA_IER, SHA_INT_DATARDY); | |
| } | |
| switch (ctx->flags & SHA_FLAGS_ALGO_MASK) { | |
| case SHA_FLAGS_SHA1: | |
| valmr |= SHA_MR_ALGO_SHA1; | |
| hashsize = SHA1_DIGEST_SIZE; | |
| break; | |
| case SHA_FLAGS_SHA224: | |
| valmr |= SHA_MR_ALGO_SHA224; | |
| hashsize = SHA256_DIGEST_SIZE; | |
| break; | |
| case SHA_FLAGS_SHA256: | |
| valmr |= SHA_MR_ALGO_SHA256; | |
| hashsize = SHA256_DIGEST_SIZE; | |
| break; | |
| case SHA_FLAGS_SHA384: | |
| valmr |= SHA_MR_ALGO_SHA384; | |
| hashsize = SHA512_DIGEST_SIZE; | |
| break; | |
| case SHA_FLAGS_SHA512: | |
| valmr |= SHA_MR_ALGO_SHA512; | |
| hashsize = SHA512_DIGEST_SIZE; | |
| break; | |
| default: | |
| break; | |
| } | |
| /* Setting CR_FIRST only for the first iteration */ | |
| if (!(ctx->digcnt[0] || ctx->digcnt[1])) { | |
| atmel_sha_write(dd, SHA_CR, SHA_CR_FIRST); | |
| } else if (dd->caps.has_uihv && (ctx->flags & SHA_FLAGS_RESTORE)) { | |
| const u32 *hash = (const u32 *)ctx->digest; | |
| /* | |
| * Restore the hardware context: update the User Initialize | |
| * Hash Value (UIHV) with the value saved when the latest | |
| * 'update' operation completed on this very same crypto | |
| * request. | |
| */ | |
| ctx->flags &= ~SHA_FLAGS_RESTORE; | |
| atmel_sha_write(dd, SHA_CR, SHA_CR_WUIHV); | |
| for (i = 0; i < hashsize / sizeof(u32); ++i) | |
| atmel_sha_write(dd, SHA_REG_DIN(i), hash[i]); | |
| atmel_sha_write(dd, SHA_CR, SHA_CR_FIRST); | |
| valmr |= SHA_MR_UIHV; | |
| } | |
| /* | |
| * WARNING: If the UIHV feature is not available, the hardware CANNOT | |
| * process concurrent requests: the internal registers used to store | |
| * the hash/digest are still set to the partial digest output values | |
| * computed during the latest round. | |
| */ | |
| atmel_sha_write(dd, SHA_MR, valmr); | |
| } | |
| static int atmel_sha_xmit_cpu(struct atmel_sha_dev *dd, const u8 *buf, | |
| size_t length, int final) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req); | |
| int count, len32; | |
| const u32 *buffer = (const u32 *)buf; | |
| dev_dbg(dd->dev, "xmit_cpu: digcnt: 0x%llx 0x%llx, length: %d, final: %d\n", | |
| ctx->digcnt[1], ctx->digcnt[0], length, final); | |
| atmel_sha_write_ctrl(dd, 0); | |
| /* should be non-zero before next lines to disable clocks later */ | |
| ctx->digcnt[0] += length; | |
| if (ctx->digcnt[0] < length) | |
| ctx->digcnt[1]++; | |
| if (final) | |
| dd->flags |= SHA_FLAGS_FINAL; /* catch last interrupt */ | |
| len32 = DIV_ROUND_UP(length, sizeof(u32)); | |
| dd->flags |= SHA_FLAGS_CPU; | |
| for (count = 0; count < len32; count++) | |
| atmel_sha_write(dd, SHA_REG_DIN(count), buffer[count]); | |
| return -EINPROGRESS; | |
| } | |
| static int atmel_sha_xmit_pdc(struct atmel_sha_dev *dd, dma_addr_t dma_addr1, | |
| size_t length1, dma_addr_t dma_addr2, size_t length2, int final) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req); | |
| int len32; | |
| dev_dbg(dd->dev, "xmit_pdc: digcnt: 0x%llx 0x%llx, length: %d, final: %d\n", | |
| ctx->digcnt[1], ctx->digcnt[0], length1, final); | |
| len32 = DIV_ROUND_UP(length1, sizeof(u32)); | |
| atmel_sha_write(dd, SHA_PTCR, SHA_PTCR_TXTDIS); | |
| atmel_sha_write(dd, SHA_TPR, dma_addr1); | |
| atmel_sha_write(dd, SHA_TCR, len32); | |
| len32 = DIV_ROUND_UP(length2, sizeof(u32)); | |
| atmel_sha_write(dd, SHA_TNPR, dma_addr2); | |
| atmel_sha_write(dd, SHA_TNCR, len32); | |
| atmel_sha_write_ctrl(dd, 1); | |
| /* should be non-zero before next lines to disable clocks later */ | |
| ctx->digcnt[0] += length1; | |
| if (ctx->digcnt[0] < length1) | |
| ctx->digcnt[1]++; | |
| if (final) | |
| dd->flags |= SHA_FLAGS_FINAL; /* catch last interrupt */ | |
| dd->flags |= SHA_FLAGS_DMA_ACTIVE; | |
| /* Start DMA transfer */ | |
| atmel_sha_write(dd, SHA_PTCR, SHA_PTCR_TXTEN); | |
| return -EINPROGRESS; | |
| } | |
| static void atmel_sha_dma_callback(void *data) | |
| { | |
| struct atmel_sha_dev *dd = data; | |
| /* dma_lch_in - completed - wait DATRDY */ | |
| atmel_sha_write(dd, SHA_IER, SHA_INT_DATARDY); | |
| } | |
| static int atmel_sha_xmit_dma(struct atmel_sha_dev *dd, dma_addr_t dma_addr1, | |
| size_t length1, dma_addr_t dma_addr2, size_t length2, int final) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req); | |
| struct dma_async_tx_descriptor *in_desc; | |
| struct scatterlist sg[2]; | |
| dev_dbg(dd->dev, "xmit_dma: digcnt: 0x%llx 0x%llx, length: %d, final: %d\n", | |
| ctx->digcnt[1], ctx->digcnt[0], length1, final); | |
| dd->dma_lch_in.dma_conf.src_maxburst = 16; | |
| dd->dma_lch_in.dma_conf.dst_maxburst = 16; | |
| dmaengine_slave_config(dd->dma_lch_in.chan, &dd->dma_lch_in.dma_conf); | |
| if (length2) { | |
| sg_init_table(sg, 2); | |
| sg_dma_address(&sg[0]) = dma_addr1; | |
| sg_dma_len(&sg[0]) = length1; | |
| sg_dma_address(&sg[1]) = dma_addr2; | |
| sg_dma_len(&sg[1]) = length2; | |
| in_desc = dmaengine_prep_slave_sg(dd->dma_lch_in.chan, sg, 2, | |
| DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); | |
| } else { | |
| sg_init_table(sg, 1); | |
| sg_dma_address(&sg[0]) = dma_addr1; | |
| sg_dma_len(&sg[0]) = length1; | |
| in_desc = dmaengine_prep_slave_sg(dd->dma_lch_in.chan, sg, 1, | |
| DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); | |
| } | |
| if (!in_desc) | |
| return -EINVAL; | |
| in_desc->callback = atmel_sha_dma_callback; | |
| in_desc->callback_param = dd; | |
| atmel_sha_write_ctrl(dd, 1); | |
| /* should be non-zero before next lines to disable clocks later */ | |
| ctx->digcnt[0] += length1; | |
| if (ctx->digcnt[0] < length1) | |
| ctx->digcnt[1]++; | |
| if (final) | |
| dd->flags |= SHA_FLAGS_FINAL; /* catch last interrupt */ | |
| dd->flags |= SHA_FLAGS_DMA_ACTIVE; | |
| /* Start DMA transfer */ | |
| dmaengine_submit(in_desc); | |
| dma_async_issue_pending(dd->dma_lch_in.chan); | |
| return -EINPROGRESS; | |
| } | |
| static int atmel_sha_xmit_start(struct atmel_sha_dev *dd, dma_addr_t dma_addr1, | |
| size_t length1, dma_addr_t dma_addr2, size_t length2, int final) | |
| { | |
| if (dd->caps.has_dma) | |
| return atmel_sha_xmit_dma(dd, dma_addr1, length1, | |
| dma_addr2, length2, final); | |
| else | |
| return atmel_sha_xmit_pdc(dd, dma_addr1, length1, | |
| dma_addr2, length2, final); | |
| } | |
| static int atmel_sha_update_cpu(struct atmel_sha_dev *dd) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req); | |
| int bufcnt; | |
| atmel_sha_append_sg(ctx); | |
| atmel_sha_fill_padding(ctx, 0); | |
| bufcnt = ctx->bufcnt; | |
| ctx->bufcnt = 0; | |
| return atmel_sha_xmit_cpu(dd, ctx->buffer, bufcnt, 1); | |
| } | |
| static int atmel_sha_xmit_dma_map(struct atmel_sha_dev *dd, | |
| struct atmel_sha_reqctx *ctx, | |
| size_t length, int final) | |
| { | |
| ctx->dma_addr = dma_map_single(dd->dev, ctx->buffer, | |
| ctx->buflen + ctx->block_size, DMA_TO_DEVICE); | |
| if (dma_mapping_error(dd->dev, ctx->dma_addr)) { | |
| dev_err(dd->dev, "dma %u bytes error\n", ctx->buflen + | |
| ctx->block_size); | |
| return -EINVAL; | |
| } | |
| ctx->flags &= ~SHA_FLAGS_SG; | |
| /* next call does not fail... so no unmap in the case of error */ | |
| return atmel_sha_xmit_start(dd, ctx->dma_addr, length, 0, 0, final); | |
| } | |
| static int atmel_sha_update_dma_slow(struct atmel_sha_dev *dd) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req); | |
| unsigned int final; | |
| size_t count; | |
| atmel_sha_append_sg(ctx); | |
| final = (ctx->flags & SHA_FLAGS_FINUP) && !ctx->total; | |
| dev_dbg(dd->dev, "slow: bufcnt: %u, digcnt: 0x%llx 0x%llx, final: %d\n", | |
| ctx->bufcnt, ctx->digcnt[1], ctx->digcnt[0], final); | |
| if (final) | |
| atmel_sha_fill_padding(ctx, 0); | |
| if (final || (ctx->bufcnt == ctx->buflen)) { | |
| count = ctx->bufcnt; | |
| ctx->bufcnt = 0; | |
| return atmel_sha_xmit_dma_map(dd, ctx, count, final); | |
| } | |
| return 0; | |
| } | |
| static int atmel_sha_update_dma_start(struct atmel_sha_dev *dd) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req); | |
| unsigned int length, final, tail; | |
| struct scatterlist *sg; | |
| unsigned int count; | |
| if (!ctx->total) | |
| return 0; | |
| if (ctx->bufcnt || ctx->offset) | |
| return atmel_sha_update_dma_slow(dd); | |
| dev_dbg(dd->dev, "fast: digcnt: 0x%llx 0x%llx, bufcnt: %u, total: %u\n", | |
| ctx->digcnt[1], ctx->digcnt[0], ctx->bufcnt, ctx->total); | |
| sg = ctx->sg; | |
| if (!IS_ALIGNED(sg->offset, sizeof(u32))) | |
| return atmel_sha_update_dma_slow(dd); | |
| if (!sg_is_last(sg) && !IS_ALIGNED(sg->length, ctx->block_size)) | |
| /* size is not ctx->block_size aligned */ | |
| return atmel_sha_update_dma_slow(dd); | |
| length = min(ctx->total, sg->length); | |
| if (sg_is_last(sg)) { | |
| if (!(ctx->flags & SHA_FLAGS_FINUP)) { | |
| /* not last sg must be ctx->block_size aligned */ | |
| tail = length & (ctx->block_size - 1); | |
| length -= tail; | |
| } | |
| } | |
| ctx->total -= length; | |
| ctx->offset = length; /* offset where to start slow */ | |
| final = (ctx->flags & SHA_FLAGS_FINUP) && !ctx->total; | |
| /* Add padding */ | |
| if (final) { | |
| tail = length & (ctx->block_size - 1); | |
| length -= tail; | |
| ctx->total += tail; | |
| ctx->offset = length; /* offset where to start slow */ | |
| sg = ctx->sg; | |
| atmel_sha_append_sg(ctx); | |
| atmel_sha_fill_padding(ctx, length); | |
| ctx->dma_addr = dma_map_single(dd->dev, ctx->buffer, | |
| ctx->buflen + ctx->block_size, DMA_TO_DEVICE); | |
| if (dma_mapping_error(dd->dev, ctx->dma_addr)) { | |
| dev_err(dd->dev, "dma %u bytes error\n", | |
| ctx->buflen + ctx->block_size); | |
| return -EINVAL; | |
| } | |
| if (length == 0) { | |
| ctx->flags &= ~SHA_FLAGS_SG; | |
| count = ctx->bufcnt; | |
| ctx->bufcnt = 0; | |
| return atmel_sha_xmit_start(dd, ctx->dma_addr, count, 0, | |
| 0, final); | |
| } else { | |
| ctx->sg = sg; | |
| if (!dma_map_sg(dd->dev, ctx->sg, 1, | |
| DMA_TO_DEVICE)) { | |
| dev_err(dd->dev, "dma_map_sg error\n"); | |
| return -EINVAL; | |
| } | |
| ctx->flags |= SHA_FLAGS_SG; | |
| count = ctx->bufcnt; | |
| ctx->bufcnt = 0; | |
| return atmel_sha_xmit_start(dd, sg_dma_address(ctx->sg), | |
| length, ctx->dma_addr, count, final); | |
| } | |
| } | |
| if (!dma_map_sg(dd->dev, ctx->sg, 1, DMA_TO_DEVICE)) { | |
| dev_err(dd->dev, "dma_map_sg error\n"); | |
| return -EINVAL; | |
| } | |
| ctx->flags |= SHA_FLAGS_SG; | |
| /* next call does not fail... so no unmap in the case of error */ | |
| return atmel_sha_xmit_start(dd, sg_dma_address(ctx->sg), length, 0, | |
| 0, final); | |
| } | |
| static int atmel_sha_update_dma_stop(struct atmel_sha_dev *dd) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req); | |
| if (ctx->flags & SHA_FLAGS_SG) { | |
| dma_unmap_sg(dd->dev, ctx->sg, 1, DMA_TO_DEVICE); | |
| if (ctx->sg->length == ctx->offset) { | |
| ctx->sg = sg_next(ctx->sg); | |
| if (ctx->sg) | |
| ctx->offset = 0; | |
| } | |
| if (ctx->flags & SHA_FLAGS_PAD) { | |
| dma_unmap_single(dd->dev, ctx->dma_addr, | |
| ctx->buflen + ctx->block_size, DMA_TO_DEVICE); | |
| } | |
| } else { | |
| dma_unmap_single(dd->dev, ctx->dma_addr, ctx->buflen + | |
| ctx->block_size, DMA_TO_DEVICE); | |
| } | |
| return 0; | |
| } | |
| static int atmel_sha_update_req(struct atmel_sha_dev *dd) | |
| { | |
| struct ahash_request *req = dd->req; | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| int err; | |
| dev_dbg(dd->dev, "update_req: total: %u, digcnt: 0x%llx 0x%llx\n", | |
| ctx->total, ctx->digcnt[1], ctx->digcnt[0]); | |
| if (ctx->flags & SHA_FLAGS_CPU) | |
| err = atmel_sha_update_cpu(dd); | |
| else | |
| err = atmel_sha_update_dma_start(dd); | |
| /* wait for dma completion before can take more data */ | |
| dev_dbg(dd->dev, "update: err: %d, digcnt: 0x%llx 0%llx\n", | |
| err, ctx->digcnt[1], ctx->digcnt[0]); | |
| return err; | |
| } | |
| static int atmel_sha_final_req(struct atmel_sha_dev *dd) | |
| { | |
| struct ahash_request *req = dd->req; | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| int err = 0; | |
| int count; | |
| if (ctx->bufcnt >= ATMEL_SHA_DMA_THRESHOLD) { | |
| atmel_sha_fill_padding(ctx, 0); | |
| count = ctx->bufcnt; | |
| ctx->bufcnt = 0; | |
| err = atmel_sha_xmit_dma_map(dd, ctx, count, 1); | |
| } | |
| /* faster to handle last block with cpu */ | |
| else { | |
| atmel_sha_fill_padding(ctx, 0); | |
| count = ctx->bufcnt; | |
| ctx->bufcnt = 0; | |
| err = atmel_sha_xmit_cpu(dd, ctx->buffer, count, 1); | |
| } | |
| dev_dbg(dd->dev, "final_req: err: %d\n", err); | |
| return err; | |
| } | |
| static void atmel_sha_copy_hash(struct ahash_request *req) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| u32 *hash = (u32 *)ctx->digest; | |
| unsigned int i, hashsize; | |
| switch (ctx->flags & SHA_FLAGS_ALGO_MASK) { | |
| case SHA_FLAGS_SHA1: | |
| hashsize = SHA1_DIGEST_SIZE; | |
| break; | |
| case SHA_FLAGS_SHA224: | |
| case SHA_FLAGS_SHA256: | |
| hashsize = SHA256_DIGEST_SIZE; | |
| break; | |
| case SHA_FLAGS_SHA384: | |
| case SHA_FLAGS_SHA512: | |
| hashsize = SHA512_DIGEST_SIZE; | |
| break; | |
| default: | |
| /* Should not happen... */ | |
| return; | |
| } | |
| for (i = 0; i < hashsize / sizeof(u32); ++i) | |
| hash[i] = atmel_sha_read(ctx->dd, SHA_REG_DIGEST(i)); | |
| ctx->flags |= SHA_FLAGS_RESTORE; | |
| } | |
| static void atmel_sha_copy_ready_hash(struct ahash_request *req) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| if (!req->result) | |
| return; | |
| if (ctx->flags & SHA_FLAGS_SHA1) | |
| memcpy(req->result, ctx->digest, SHA1_DIGEST_SIZE); | |
| else if (ctx->flags & SHA_FLAGS_SHA224) | |
| memcpy(req->result, ctx->digest, SHA224_DIGEST_SIZE); | |
| else if (ctx->flags & SHA_FLAGS_SHA256) | |
| memcpy(req->result, ctx->digest, SHA256_DIGEST_SIZE); | |
| else if (ctx->flags & SHA_FLAGS_SHA384) | |
| memcpy(req->result, ctx->digest, SHA384_DIGEST_SIZE); | |
| else | |
| memcpy(req->result, ctx->digest, SHA512_DIGEST_SIZE); | |
| } | |
| static int atmel_sha_finish(struct ahash_request *req) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| struct atmel_sha_dev *dd = ctx->dd; | |
| if (ctx->digcnt[0] || ctx->digcnt[1]) | |
| atmel_sha_copy_ready_hash(req); | |
| dev_dbg(dd->dev, "digcnt: 0x%llx 0x%llx, bufcnt: %d\n", ctx->digcnt[1], | |
| ctx->digcnt[0], ctx->bufcnt); | |
| return 0; | |
| } | |
| static void atmel_sha_finish_req(struct ahash_request *req, int err) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| struct atmel_sha_dev *dd = ctx->dd; | |
| if (!err) { | |
| atmel_sha_copy_hash(req); | |
| if (SHA_FLAGS_FINAL & dd->flags) | |
| err = atmel_sha_finish(req); | |
| } else { | |
| ctx->flags |= SHA_FLAGS_ERROR; | |
| } | |
| /* atomic operation is not needed here */ | |
| dd->flags &= ~(SHA_FLAGS_BUSY | SHA_FLAGS_FINAL | SHA_FLAGS_CPU | | |
| SHA_FLAGS_DMA_READY | SHA_FLAGS_OUTPUT_READY); | |
| clk_disable(dd->iclk); | |
| if (req->base.complete) | |
| req->base.complete(&req->base, err); | |
| /* handle new request */ | |
| tasklet_schedule(&dd->queue_task); | |
| } | |
| static int atmel_sha_hw_init(struct atmel_sha_dev *dd) | |
| { | |
| int err; | |
| err = clk_enable(dd->iclk); | |
| if (err) | |
| return err; | |
| if (!(SHA_FLAGS_INIT & dd->flags)) { | |
| atmel_sha_write(dd, SHA_CR, SHA_CR_SWRST); | |
| dd->flags |= SHA_FLAGS_INIT; | |
| dd->err = 0; | |
| } | |
| return 0; | |
| } | |
| static inline unsigned int atmel_sha_get_version(struct atmel_sha_dev *dd) | |
| { | |
| return atmel_sha_read(dd, SHA_HW_VERSION) & 0x00000fff; | |
| } | |
| static void atmel_sha_hw_version_init(struct atmel_sha_dev *dd) | |
| { | |
| atmel_sha_hw_init(dd); | |
| dd->hw_version = atmel_sha_get_version(dd); | |
| dev_info(dd->dev, | |
| "version: 0x%x\n", dd->hw_version); | |
| clk_disable(dd->iclk); | |
| } | |
| static int atmel_sha_handle_queue(struct atmel_sha_dev *dd, | |
| struct ahash_request *req) | |
| { | |
| struct crypto_async_request *async_req, *backlog; | |
| struct atmel_sha_reqctx *ctx; | |
| unsigned long flags; | |
| int err = 0, ret = 0; | |
| spin_lock_irqsave(&dd->lock, flags); | |
| if (req) | |
| ret = ahash_enqueue_request(&dd->queue, req); | |
| if (SHA_FLAGS_BUSY & dd->flags) { | |
| spin_unlock_irqrestore(&dd->lock, flags); | |
| return ret; | |
| } | |
| backlog = crypto_get_backlog(&dd->queue); | |
| async_req = crypto_dequeue_request(&dd->queue); | |
| if (async_req) | |
| dd->flags |= SHA_FLAGS_BUSY; | |
| spin_unlock_irqrestore(&dd->lock, flags); | |
| if (!async_req) | |
| return ret; | |
| if (backlog) | |
| backlog->complete(backlog, -EINPROGRESS); | |
| req = ahash_request_cast(async_req); | |
| dd->req = req; | |
| ctx = ahash_request_ctx(req); | |
| dev_dbg(dd->dev, "handling new req, op: %lu, nbytes: %d\n", | |
| ctx->op, req->nbytes); | |
| err = atmel_sha_hw_init(dd); | |
| if (err) | |
| goto err1; | |
| if (ctx->op == SHA_OP_UPDATE) { | |
| err = atmel_sha_update_req(dd); | |
| if (err != -EINPROGRESS && (ctx->flags & SHA_FLAGS_FINUP)) | |
| /* no final() after finup() */ | |
| err = atmel_sha_final_req(dd); | |
| } else if (ctx->op == SHA_OP_FINAL) { | |
| err = atmel_sha_final_req(dd); | |
| } | |
| err1: | |
| if (err != -EINPROGRESS) | |
| /* done_task will not finish it, so do it here */ | |
| atmel_sha_finish_req(req, err); | |
| dev_dbg(dd->dev, "exit, err: %d\n", err); | |
| return ret; | |
| } | |
| static int atmel_sha_enqueue(struct ahash_request *req, unsigned int op) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| struct atmel_sha_ctx *tctx = crypto_tfm_ctx(req->base.tfm); | |
| struct atmel_sha_dev *dd = tctx->dd; | |
| ctx->op = op; | |
| return atmel_sha_handle_queue(dd, req); | |
| } | |
| static int atmel_sha_update(struct ahash_request *req) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| if (!req->nbytes) | |
| return 0; | |
| ctx->total = req->nbytes; | |
| ctx->sg = req->src; | |
| ctx->offset = 0; | |
| if (ctx->flags & SHA_FLAGS_FINUP) { | |
| if (ctx->bufcnt + ctx->total < ATMEL_SHA_DMA_THRESHOLD) | |
| /* faster to use CPU for short transfers */ | |
| ctx->flags |= SHA_FLAGS_CPU; | |
| } else if (ctx->bufcnt + ctx->total < ctx->buflen) { | |
| atmel_sha_append_sg(ctx); | |
| return 0; | |
| } | |
| return atmel_sha_enqueue(req, SHA_OP_UPDATE); | |
| } | |
| static int atmel_sha_final(struct ahash_request *req) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| ctx->flags |= SHA_FLAGS_FINUP; | |
| if (ctx->flags & SHA_FLAGS_ERROR) | |
| return 0; /* uncompleted hash is not needed */ | |
| if (ctx->flags & SHA_FLAGS_PAD) | |
| /* copy ready hash (+ finalize hmac) */ | |
| return atmel_sha_finish(req); | |
| return atmel_sha_enqueue(req, SHA_OP_FINAL); | |
| } | |
| static int atmel_sha_finup(struct ahash_request *req) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| int err1, err2; | |
| ctx->flags |= SHA_FLAGS_FINUP; | |
| err1 = atmel_sha_update(req); | |
| if (err1 == -EINPROGRESS || err1 == -EBUSY) | |
| return err1; | |
| /* | |
| * final() has to be always called to cleanup resources | |
| * even if udpate() failed, except EINPROGRESS | |
| */ | |
| err2 = atmel_sha_final(req); | |
| return err1 ?: err2; | |
| } | |
| static int atmel_sha_digest(struct ahash_request *req) | |
| { | |
| return atmel_sha_init(req) ?: atmel_sha_finup(req); | |
| } | |
| static int atmel_sha_export(struct ahash_request *req, void *out) | |
| { | |
| const struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| memcpy(out, ctx, sizeof(*ctx)); | |
| return 0; | |
| } | |
| static int atmel_sha_import(struct ahash_request *req, const void *in) | |
| { | |
| struct atmel_sha_reqctx *ctx = ahash_request_ctx(req); | |
| memcpy(ctx, in, sizeof(*ctx)); | |
| return 0; | |
| } | |
| static int atmel_sha_cra_init(struct crypto_tfm *tfm) | |
| { | |
| crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), | |
| sizeof(struct atmel_sha_reqctx)); | |
| return 0; | |
| } | |
| static struct ahash_alg sha_1_256_algs[] = { | |
| { | |
| .init = atmel_sha_init, | |
| .update = atmel_sha_update, | |
| .final = atmel_sha_final, | |
| .finup = atmel_sha_finup, | |
| .digest = atmel_sha_digest, | |
| .export = atmel_sha_export, | |
| .import = atmel_sha_import, | |
| .halg = { | |
| .digestsize = SHA1_DIGEST_SIZE, | |
| .statesize = sizeof(struct atmel_sha_reqctx), | |
| .base = { | |
| .cra_name = "sha1", | |
| .cra_driver_name = "atmel-sha1", | |
| .cra_priority = 100, | |
| .cra_flags = CRYPTO_ALG_ASYNC, | |
| .cra_blocksize = SHA1_BLOCK_SIZE, | |
| .cra_ctxsize = sizeof(struct atmel_sha_ctx), | |
| .cra_alignmask = 0, | |
| .cra_module = THIS_MODULE, | |
| .cra_init = atmel_sha_cra_init, | |
| } | |
| } | |
| }, | |
| { | |
| .init = atmel_sha_init, | |
| .update = atmel_sha_update, | |
| .final = atmel_sha_final, | |
| .finup = atmel_sha_finup, | |
| .digest = atmel_sha_digest, | |
| .export = atmel_sha_export, | |
| .import = atmel_sha_import, | |
| .halg = { | |
| .digestsize = SHA256_DIGEST_SIZE, | |
| .statesize = sizeof(struct atmel_sha_reqctx), | |
| .base = { | |
| .cra_name = "sha256", | |
| .cra_driver_name = "atmel-sha256", | |
| .cra_priority = 100, | |
| .cra_flags = CRYPTO_ALG_ASYNC, | |
| .cra_blocksize = SHA256_BLOCK_SIZE, | |
| .cra_ctxsize = sizeof(struct atmel_sha_ctx), | |
| .cra_alignmask = 0, | |
| .cra_module = THIS_MODULE, | |
| .cra_init = atmel_sha_cra_init, | |
| } | |
| } | |
| }, | |
| }; | |
| static struct ahash_alg sha_224_alg = { | |
| .init = atmel_sha_init, | |
| .update = atmel_sha_update, | |
| .final = atmel_sha_final, | |
| .finup = atmel_sha_finup, | |
| .digest = atmel_sha_digest, | |
| .export = atmel_sha_export, | |
| .import = atmel_sha_import, | |
| .halg = { | |
| .digestsize = SHA224_DIGEST_SIZE, | |
| .statesize = sizeof(struct atmel_sha_reqctx), | |
| .base = { | |
| .cra_name = "sha224", | |
| .cra_driver_name = "atmel-sha224", | |
| .cra_priority = 100, | |
| .cra_flags = CRYPTO_ALG_ASYNC, | |
| .cra_blocksize = SHA224_BLOCK_SIZE, | |
| .cra_ctxsize = sizeof(struct atmel_sha_ctx), | |
| .cra_alignmask = 0, | |
| .cra_module = THIS_MODULE, | |
| .cra_init = atmel_sha_cra_init, | |
| } | |
| } | |
| }; | |
| static struct ahash_alg sha_384_512_algs[] = { | |
| { | |
| .init = atmel_sha_init, | |
| .update = atmel_sha_update, | |
| .final = atmel_sha_final, | |
| .finup = atmel_sha_finup, | |
| .digest = atmel_sha_digest, | |
| .export = atmel_sha_export, | |
| .import = atmel_sha_import, | |
| .halg = { | |
| .digestsize = SHA384_DIGEST_SIZE, | |
| .statesize = sizeof(struct atmel_sha_reqctx), | |
| .base = { | |
| .cra_name = "sha384", | |
| .cra_driver_name = "atmel-sha384", | |
| .cra_priority = 100, | |
| .cra_flags = CRYPTO_ALG_ASYNC, | |
| .cra_blocksize = SHA384_BLOCK_SIZE, | |
| .cra_ctxsize = sizeof(struct atmel_sha_ctx), | |
| .cra_alignmask = 0x3, | |
| .cra_module = THIS_MODULE, | |
| .cra_init = atmel_sha_cra_init, | |
| } | |
| } | |
| }, | |
| { | |
| .init = atmel_sha_init, | |
| .update = atmel_sha_update, | |
| .final = atmel_sha_final, | |
| .finup = atmel_sha_finup, | |
| .digest = atmel_sha_digest, | |
| .export = atmel_sha_export, | |
| .import = atmel_sha_import, | |
| .halg = { | |
| .digestsize = SHA512_DIGEST_SIZE, | |
| .statesize = sizeof(struct atmel_sha_reqctx), | |
| .base = { | |
| .cra_name = "sha512", | |
| .cra_driver_name = "atmel-sha512", | |
| .cra_priority = 100, | |
| .cra_flags = CRYPTO_ALG_ASYNC, | |
| .cra_blocksize = SHA512_BLOCK_SIZE, | |
| .cra_ctxsize = sizeof(struct atmel_sha_ctx), | |
| .cra_alignmask = 0x3, | |
| .cra_module = THIS_MODULE, | |
| .cra_init = atmel_sha_cra_init, | |
| } | |
| } | |
| }, | |
| }; | |
| static void atmel_sha_queue_task(unsigned long data) | |
| { | |
| struct atmel_sha_dev *dd = (struct atmel_sha_dev *)data; | |
| atmel_sha_handle_queue(dd, NULL); | |
| } | |
| static void atmel_sha_done_task(unsigned long data) | |
| { | |
| struct atmel_sha_dev *dd = (struct atmel_sha_dev *)data; | |
| int err = 0; | |
| if (SHA_FLAGS_CPU & dd->flags) { | |
| if (SHA_FLAGS_OUTPUT_READY & dd->flags) { | |
| dd->flags &= ~SHA_FLAGS_OUTPUT_READY; | |
| goto finish; | |
| } | |
| } else if (SHA_FLAGS_DMA_READY & dd->flags) { | |
| if (SHA_FLAGS_DMA_ACTIVE & dd->flags) { | |
| dd->flags &= ~SHA_FLAGS_DMA_ACTIVE; | |
| atmel_sha_update_dma_stop(dd); | |
| if (dd->err) { | |
| err = dd->err; | |
| goto finish; | |
| } | |
| } | |
| if (SHA_FLAGS_OUTPUT_READY & dd->flags) { | |
| /* hash or semi-hash ready */ | |
| dd->flags &= ~(SHA_FLAGS_DMA_READY | | |
| SHA_FLAGS_OUTPUT_READY); | |
| err = atmel_sha_update_dma_start(dd); | |
| if (err != -EINPROGRESS) | |
| goto finish; | |
| } | |
| } | |
| return; | |
| finish: | |
| /* finish curent request */ | |
| atmel_sha_finish_req(dd->req, err); | |
| } | |
| static irqreturn_t atmel_sha_irq(int irq, void *dev_id) | |
| { | |
| struct atmel_sha_dev *sha_dd = dev_id; | |
| u32 reg; | |
| reg = atmel_sha_read(sha_dd, SHA_ISR); | |
| if (reg & atmel_sha_read(sha_dd, SHA_IMR)) { | |
| atmel_sha_write(sha_dd, SHA_IDR, reg); | |
| if (SHA_FLAGS_BUSY & sha_dd->flags) { | |
| sha_dd->flags |= SHA_FLAGS_OUTPUT_READY; | |
| if (!(SHA_FLAGS_CPU & sha_dd->flags)) | |
| sha_dd->flags |= SHA_FLAGS_DMA_READY; | |
| tasklet_schedule(&sha_dd->done_task); | |
| } else { | |
| dev_warn(sha_dd->dev, "SHA interrupt when no active requests.\n"); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| return IRQ_NONE; | |
| } | |
| static void atmel_sha_unregister_algs(struct atmel_sha_dev *dd) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(sha_1_256_algs); i++) | |
| crypto_unregister_ahash(&sha_1_256_algs[i]); | |
| if (dd->caps.has_sha224) | |
| crypto_unregister_ahash(&sha_224_alg); | |
| if (dd->caps.has_sha_384_512) { | |
| for (i = 0; i < ARRAY_SIZE(sha_384_512_algs); i++) | |
| crypto_unregister_ahash(&sha_384_512_algs[i]); | |
| } | |
| } | |
| static int atmel_sha_register_algs(struct atmel_sha_dev *dd) | |
| { | |
| int err, i, j; | |
| for (i = 0; i < ARRAY_SIZE(sha_1_256_algs); i++) { | |
| err = crypto_register_ahash(&sha_1_256_algs[i]); | |
| if (err) | |
| goto err_sha_1_256_algs; | |
| } | |
| if (dd->caps.has_sha224) { | |
| err = crypto_register_ahash(&sha_224_alg); | |
| if (err) | |
| goto err_sha_224_algs; | |
| } | |
| if (dd->caps.has_sha_384_512) { | |
| for (i = 0; i < ARRAY_SIZE(sha_384_512_algs); i++) { | |
| err = crypto_register_ahash(&sha_384_512_algs[i]); | |
| if (err) | |
| goto err_sha_384_512_algs; | |
| } | |
| } | |
| return 0; | |
| err_sha_384_512_algs: | |
| for (j = 0; j < i; j++) | |
| crypto_unregister_ahash(&sha_384_512_algs[j]); | |
| crypto_unregister_ahash(&sha_224_alg); | |
| err_sha_224_algs: | |
| i = ARRAY_SIZE(sha_1_256_algs); | |
| err_sha_1_256_algs: | |
| for (j = 0; j < i; j++) | |
| crypto_unregister_ahash(&sha_1_256_algs[j]); | |
| return err; | |
| } | |
| static bool atmel_sha_filter(struct dma_chan *chan, void *slave) | |
| { | |
| struct at_dma_slave *sl = slave; | |
| if (sl && sl->dma_dev == chan->device->dev) { | |
| chan->private = sl; | |
| return true; | |
| } else { | |
| return false; | |
| } | |
| } | |
| static int atmel_sha_dma_init(struct atmel_sha_dev *dd, | |
| struct crypto_platform_data *pdata) | |
| { | |
| int err = -ENOMEM; | |
| dma_cap_mask_t mask_in; | |
| /* Try to grab DMA channel */ | |
| dma_cap_zero(mask_in); | |
| dma_cap_set(DMA_SLAVE, mask_in); | |
| dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask_in, | |
| atmel_sha_filter, &pdata->dma_slave->rxdata, dd->dev, "tx"); | |
| if (!dd->dma_lch_in.chan) { | |
| dev_warn(dd->dev, "no DMA channel available\n"); | |
| return err; | |
| } | |
| dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV; | |
| dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base + | |
| SHA_REG_DIN(0); | |
| dd->dma_lch_in.dma_conf.src_maxburst = 1; | |
| dd->dma_lch_in.dma_conf.src_addr_width = | |
| DMA_SLAVE_BUSWIDTH_4_BYTES; | |
| dd->dma_lch_in.dma_conf.dst_maxburst = 1; | |
| dd->dma_lch_in.dma_conf.dst_addr_width = | |
| DMA_SLAVE_BUSWIDTH_4_BYTES; | |
| dd->dma_lch_in.dma_conf.device_fc = false; | |
| return 0; | |
| } | |
| static void atmel_sha_dma_cleanup(struct atmel_sha_dev *dd) | |
| { | |
| dma_release_channel(dd->dma_lch_in.chan); | |
| } | |
| static void atmel_sha_get_cap(struct atmel_sha_dev *dd) | |
| { | |
| dd->caps.has_dma = 0; | |
| dd->caps.has_dualbuff = 0; | |
| dd->caps.has_sha224 = 0; | |
| dd->caps.has_sha_384_512 = 0; | |
| dd->caps.has_uihv = 0; | |
| /* keep only major version number */ | |
| switch (dd->hw_version & 0xff0) { | |
| case 0x510: | |
| dd->caps.has_dma = 1; | |
| dd->caps.has_dualbuff = 1; | |
| dd->caps.has_sha224 = 1; | |
| dd->caps.has_sha_384_512 = 1; | |
| dd->caps.has_uihv = 1; | |
| break; | |
| case 0x420: | |
| dd->caps.has_dma = 1; | |
| dd->caps.has_dualbuff = 1; | |
| dd->caps.has_sha224 = 1; | |
| dd->caps.has_sha_384_512 = 1; | |
| dd->caps.has_uihv = 1; | |
| break; | |
| case 0x410: | |
| dd->caps.has_dma = 1; | |
| dd->caps.has_dualbuff = 1; | |
| dd->caps.has_sha224 = 1; | |
| dd->caps.has_sha_384_512 = 1; | |
| break; | |
| case 0x400: | |
| dd->caps.has_dma = 1; | |
| dd->caps.has_dualbuff = 1; | |
| dd->caps.has_sha224 = 1; | |
| break; | |
| case 0x320: | |
| break; | |
| default: | |
| dev_warn(dd->dev, | |
| "Unmanaged sha version, set minimum capabilities\n"); | |
| break; | |
| } | |
| } | |
| #if defined(CONFIG_OF) | |
| static const struct of_device_id atmel_sha_dt_ids[] = { | |
| { .compatible = "atmel,at91sam9g46-sha" }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, atmel_sha_dt_ids); | |
| static struct crypto_platform_data *atmel_sha_of_init(struct platform_device *pdev) | |
| { | |
| struct device_node *np = pdev->dev.of_node; | |
| struct crypto_platform_data *pdata; | |
| if (!np) { | |
| dev_err(&pdev->dev, "device node not found\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); | |
| if (!pdata) { | |
| dev_err(&pdev->dev, "could not allocate memory for pdata\n"); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| pdata->dma_slave = devm_kzalloc(&pdev->dev, | |
| sizeof(*(pdata->dma_slave)), | |
| GFP_KERNEL); | |
| if (!pdata->dma_slave) { | |
| dev_err(&pdev->dev, "could not allocate memory for dma_slave\n"); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| return pdata; | |
| } | |
| #else /* CONFIG_OF */ | |
| static inline struct crypto_platform_data *atmel_sha_of_init(struct platform_device *dev) | |
| { | |
| return ERR_PTR(-EINVAL); | |
| } | |
| #endif | |
| static int atmel_sha_probe(struct platform_device *pdev) | |
| { | |
| struct atmel_sha_dev *sha_dd; | |
| struct crypto_platform_data *pdata; | |
| struct device *dev = &pdev->dev; | |
| struct resource *sha_res; | |
| int err; | |
| sha_dd = devm_kzalloc(&pdev->dev, sizeof(*sha_dd), GFP_KERNEL); | |
| if (sha_dd == NULL) { | |
| dev_err(dev, "unable to alloc data struct.\n"); | |
| err = -ENOMEM; | |
| goto sha_dd_err; | |
| } | |
| sha_dd->dev = dev; | |
| platform_set_drvdata(pdev, sha_dd); | |
| INIT_LIST_HEAD(&sha_dd->list); | |
| spin_lock_init(&sha_dd->lock); | |
| tasklet_init(&sha_dd->done_task, atmel_sha_done_task, | |
| (unsigned long)sha_dd); | |
| tasklet_init(&sha_dd->queue_task, atmel_sha_queue_task, | |
| (unsigned long)sha_dd); | |
| crypto_init_queue(&sha_dd->queue, ATMEL_SHA_QUEUE_LENGTH); | |
| sha_dd->irq = -1; | |
| /* Get the base address */ | |
| sha_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!sha_res) { | |
| dev_err(dev, "no MEM resource info\n"); | |
| err = -ENODEV; | |
| goto res_err; | |
| } | |
| sha_dd->phys_base = sha_res->start; | |
| /* Get the IRQ */ | |
| sha_dd->irq = platform_get_irq(pdev, 0); | |
| if (sha_dd->irq < 0) { | |
| dev_err(dev, "no IRQ resource info\n"); | |
| err = sha_dd->irq; | |
| goto res_err; | |
| } | |
| err = devm_request_irq(&pdev->dev, sha_dd->irq, atmel_sha_irq, | |
| IRQF_SHARED, "atmel-sha", sha_dd); | |
| if (err) { | |
| dev_err(dev, "unable to request sha irq.\n"); | |
| goto res_err; | |
| } | |
| /* Initializing the clock */ | |
| sha_dd->iclk = devm_clk_get(&pdev->dev, "sha_clk"); | |
| if (IS_ERR(sha_dd->iclk)) { | |
| dev_err(dev, "clock initialization failed.\n"); | |
| err = PTR_ERR(sha_dd->iclk); | |
| goto res_err; | |
| } | |
| sha_dd->io_base = devm_ioremap_resource(&pdev->dev, sha_res); | |
| if (IS_ERR(sha_dd->io_base)) { | |
| dev_err(dev, "can't ioremap\n"); | |
| err = PTR_ERR(sha_dd->io_base); | |
| goto res_err; | |
| } | |
| err = clk_prepare(sha_dd->iclk); | |
| if (err) | |
| goto res_err; | |
| atmel_sha_hw_version_init(sha_dd); | |
| atmel_sha_get_cap(sha_dd); | |
| if (sha_dd->caps.has_dma) { | |
| pdata = pdev->dev.platform_data; | |
| if (!pdata) { | |
| pdata = atmel_sha_of_init(pdev); | |
| if (IS_ERR(pdata)) { | |
| dev_err(&pdev->dev, "platform data not available\n"); | |
| err = PTR_ERR(pdata); | |
| goto iclk_unprepare; | |
| } | |
| } | |
| if (!pdata->dma_slave) { | |
| err = -ENXIO; | |
| goto iclk_unprepare; | |
| } | |
| err = atmel_sha_dma_init(sha_dd, pdata); | |
| if (err) | |
| goto err_sha_dma; | |
| dev_info(dev, "using %s for DMA transfers\n", | |
| dma_chan_name(sha_dd->dma_lch_in.chan)); | |
| } | |
| spin_lock(&atmel_sha.lock); | |
| list_add_tail(&sha_dd->list, &atmel_sha.dev_list); | |
| spin_unlock(&atmel_sha.lock); | |
| err = atmel_sha_register_algs(sha_dd); | |
| if (err) | |
| goto err_algs; | |
| dev_info(dev, "Atmel SHA1/SHA256%s%s\n", | |
| sha_dd->caps.has_sha224 ? "/SHA224" : "", | |
| sha_dd->caps.has_sha_384_512 ? "/SHA384/SHA512" : ""); | |
| return 0; | |
| err_algs: | |
| spin_lock(&atmel_sha.lock); | |
| list_del(&sha_dd->list); | |
| spin_unlock(&atmel_sha.lock); | |
| if (sha_dd->caps.has_dma) | |
| atmel_sha_dma_cleanup(sha_dd); | |
| err_sha_dma: | |
| iclk_unprepare: | |
| clk_unprepare(sha_dd->iclk); | |
| res_err: | |
| tasklet_kill(&sha_dd->queue_task); | |
| tasklet_kill(&sha_dd->done_task); | |
| sha_dd_err: | |
| dev_err(dev, "initialization failed.\n"); | |
| return err; | |
| } | |
| static int atmel_sha_remove(struct platform_device *pdev) | |
| { | |
| static struct atmel_sha_dev *sha_dd; | |
| sha_dd = platform_get_drvdata(pdev); | |
| if (!sha_dd) | |
| return -ENODEV; | |
| spin_lock(&atmel_sha.lock); | |
| list_del(&sha_dd->list); | |
| spin_unlock(&atmel_sha.lock); | |
| atmel_sha_unregister_algs(sha_dd); | |
| tasklet_kill(&sha_dd->queue_task); | |
| tasklet_kill(&sha_dd->done_task); | |
| if (sha_dd->caps.has_dma) | |
| atmel_sha_dma_cleanup(sha_dd); | |
| clk_unprepare(sha_dd->iclk); | |
| return 0; | |
| } | |
| static struct platform_driver atmel_sha_driver = { | |
| .probe = atmel_sha_probe, | |
| .remove = atmel_sha_remove, | |
| .driver = { | |
| .name = "atmel_sha", | |
| .of_match_table = of_match_ptr(atmel_sha_dt_ids), | |
| }, | |
| }; | |
| module_platform_driver(atmel_sha_driver); | |
| MODULE_DESCRIPTION("Atmel SHA (1/256/224/384/512) hw acceleration support."); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_AUTHOR("Nicolas Royer - Eukréa Electromatique"); |