| /* | |
| * AMD Cryptographic Coprocessor (CCP) driver | |
| * | |
| * Copyright (C) 2013,2016 Advanced Micro Devices, Inc. | |
| * | |
| * Author: Tom Lendacky <thomas.lendacky@amd.com> | |
| * Author: Gary R Hook <gary.hook@amd.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/pci.h> | |
| #include <linux/interrupt.h> | |
| #include <crypto/scatterwalk.h> | |
| #include <linux/ccp.h> | |
| #include "ccp-dev.h" | |
| /* SHA initial context values */ | |
| static const __be32 ccp_sha1_init[SHA1_DIGEST_SIZE / sizeof(__be32)] = { | |
| cpu_to_be32(SHA1_H0), cpu_to_be32(SHA1_H1), | |
| cpu_to_be32(SHA1_H2), cpu_to_be32(SHA1_H3), | |
| cpu_to_be32(SHA1_H4), | |
| }; | |
| static const __be32 ccp_sha224_init[SHA256_DIGEST_SIZE / sizeof(__be32)] = { | |
| cpu_to_be32(SHA224_H0), cpu_to_be32(SHA224_H1), | |
| cpu_to_be32(SHA224_H2), cpu_to_be32(SHA224_H3), | |
| cpu_to_be32(SHA224_H4), cpu_to_be32(SHA224_H5), | |
| cpu_to_be32(SHA224_H6), cpu_to_be32(SHA224_H7), | |
| }; | |
| static const __be32 ccp_sha256_init[SHA256_DIGEST_SIZE / sizeof(__be32)] = { | |
| cpu_to_be32(SHA256_H0), cpu_to_be32(SHA256_H1), | |
| cpu_to_be32(SHA256_H2), cpu_to_be32(SHA256_H3), | |
| cpu_to_be32(SHA256_H4), cpu_to_be32(SHA256_H5), | |
| cpu_to_be32(SHA256_H6), cpu_to_be32(SHA256_H7), | |
| }; | |
| #define CCP_NEW_JOBID(ccp) ((ccp->vdata->version == CCP_VERSION(3, 0)) ? \ | |
| ccp_gen_jobid(ccp) : 0) | |
| static u32 ccp_gen_jobid(struct ccp_device *ccp) | |
| { | |
| return atomic_inc_return(&ccp->current_id) & CCP_JOBID_MASK; | |
| } | |
| static void ccp_sg_free(struct ccp_sg_workarea *wa) | |
| { | |
| if (wa->dma_count) | |
| dma_unmap_sg(wa->dma_dev, wa->dma_sg, wa->nents, wa->dma_dir); | |
| wa->dma_count = 0; | |
| } | |
| static int ccp_init_sg_workarea(struct ccp_sg_workarea *wa, struct device *dev, | |
| struct scatterlist *sg, u64 len, | |
| enum dma_data_direction dma_dir) | |
| { | |
| memset(wa, 0, sizeof(*wa)); | |
| wa->sg = sg; | |
| if (!sg) | |
| return 0; | |
| wa->nents = sg_nents_for_len(sg, len); | |
| if (wa->nents < 0) | |
| return wa->nents; | |
| wa->bytes_left = len; | |
| wa->sg_used = 0; | |
| if (len == 0) | |
| return 0; | |
| if (dma_dir == DMA_NONE) | |
| return 0; | |
| wa->dma_sg = sg; | |
| wa->dma_dev = dev; | |
| wa->dma_dir = dma_dir; | |
| wa->dma_count = dma_map_sg(dev, sg, wa->nents, dma_dir); | |
| if (!wa->dma_count) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| static void ccp_update_sg_workarea(struct ccp_sg_workarea *wa, unsigned int len) | |
| { | |
| unsigned int nbytes = min_t(u64, len, wa->bytes_left); | |
| if (!wa->sg) | |
| return; | |
| wa->sg_used += nbytes; | |
| wa->bytes_left -= nbytes; | |
| if (wa->sg_used == wa->sg->length) { | |
| wa->sg = sg_next(wa->sg); | |
| wa->sg_used = 0; | |
| } | |
| } | |
| static void ccp_dm_free(struct ccp_dm_workarea *wa) | |
| { | |
| if (wa->length <= CCP_DMAPOOL_MAX_SIZE) { | |
| if (wa->address) | |
| dma_pool_free(wa->dma_pool, wa->address, | |
| wa->dma.address); | |
| } else { | |
| if (wa->dma.address) | |
| dma_unmap_single(wa->dev, wa->dma.address, wa->length, | |
| wa->dma.dir); | |
| kfree(wa->address); | |
| } | |
| wa->address = NULL; | |
| wa->dma.address = 0; | |
| } | |
| static int ccp_init_dm_workarea(struct ccp_dm_workarea *wa, | |
| struct ccp_cmd_queue *cmd_q, | |
| unsigned int len, | |
| enum dma_data_direction dir) | |
| { | |
| memset(wa, 0, sizeof(*wa)); | |
| if (!len) | |
| return 0; | |
| wa->dev = cmd_q->ccp->dev; | |
| wa->length = len; | |
| if (len <= CCP_DMAPOOL_MAX_SIZE) { | |
| wa->dma_pool = cmd_q->dma_pool; | |
| wa->address = dma_pool_alloc(wa->dma_pool, GFP_KERNEL, | |
| &wa->dma.address); | |
| if (!wa->address) | |
| return -ENOMEM; | |
| wa->dma.length = CCP_DMAPOOL_MAX_SIZE; | |
| memset(wa->address, 0, CCP_DMAPOOL_MAX_SIZE); | |
| } else { | |
| wa->address = kzalloc(len, GFP_KERNEL); | |
| if (!wa->address) | |
| return -ENOMEM; | |
| wa->dma.address = dma_map_single(wa->dev, wa->address, len, | |
| dir); | |
| if (!wa->dma.address) | |
| return -ENOMEM; | |
| wa->dma.length = len; | |
| } | |
| wa->dma.dir = dir; | |
| return 0; | |
| } | |
| static void ccp_set_dm_area(struct ccp_dm_workarea *wa, unsigned int wa_offset, | |
| struct scatterlist *sg, unsigned int sg_offset, | |
| unsigned int len) | |
| { | |
| WARN_ON(!wa->address); | |
| scatterwalk_map_and_copy(wa->address + wa_offset, sg, sg_offset, len, | |
| 0); | |
| } | |
| static void ccp_get_dm_area(struct ccp_dm_workarea *wa, unsigned int wa_offset, | |
| struct scatterlist *sg, unsigned int sg_offset, | |
| unsigned int len) | |
| { | |
| WARN_ON(!wa->address); | |
| scatterwalk_map_and_copy(wa->address + wa_offset, sg, sg_offset, len, | |
| 1); | |
| } | |
| static int ccp_reverse_set_dm_area(struct ccp_dm_workarea *wa, | |
| struct scatterlist *sg, | |
| unsigned int len, unsigned int se_len, | |
| bool sign_extend) | |
| { | |
| unsigned int nbytes, sg_offset, dm_offset, sb_len, i; | |
| u8 buffer[CCP_REVERSE_BUF_SIZE]; | |
| if (WARN_ON(se_len > sizeof(buffer))) | |
| return -EINVAL; | |
| sg_offset = len; | |
| dm_offset = 0; | |
| nbytes = len; | |
| while (nbytes) { | |
| sb_len = min_t(unsigned int, nbytes, se_len); | |
| sg_offset -= sb_len; | |
| scatterwalk_map_and_copy(buffer, sg, sg_offset, sb_len, 0); | |
| for (i = 0; i < sb_len; i++) | |
| wa->address[dm_offset + i] = buffer[sb_len - i - 1]; | |
| dm_offset += sb_len; | |
| nbytes -= sb_len; | |
| if ((sb_len != se_len) && sign_extend) { | |
| /* Must sign-extend to nearest sign-extend length */ | |
| if (wa->address[dm_offset - 1] & 0x80) | |
| memset(wa->address + dm_offset, 0xff, | |
| se_len - sb_len); | |
| } | |
| } | |
| return 0; | |
| } | |
| static void ccp_reverse_get_dm_area(struct ccp_dm_workarea *wa, | |
| struct scatterlist *sg, | |
| unsigned int len) | |
| { | |
| unsigned int nbytes, sg_offset, dm_offset, sb_len, i; | |
| u8 buffer[CCP_REVERSE_BUF_SIZE]; | |
| sg_offset = 0; | |
| dm_offset = len; | |
| nbytes = len; | |
| while (nbytes) { | |
| sb_len = min_t(unsigned int, nbytes, sizeof(buffer)); | |
| dm_offset -= sb_len; | |
| for (i = 0; i < sb_len; i++) | |
| buffer[sb_len - i - 1] = wa->address[dm_offset + i]; | |
| scatterwalk_map_and_copy(buffer, sg, sg_offset, sb_len, 1); | |
| sg_offset += sb_len; | |
| nbytes -= sb_len; | |
| } | |
| } | |
| static void ccp_free_data(struct ccp_data *data, struct ccp_cmd_queue *cmd_q) | |
| { | |
| ccp_dm_free(&data->dm_wa); | |
| ccp_sg_free(&data->sg_wa); | |
| } | |
| static int ccp_init_data(struct ccp_data *data, struct ccp_cmd_queue *cmd_q, | |
| struct scatterlist *sg, u64 sg_len, | |
| unsigned int dm_len, | |
| enum dma_data_direction dir) | |
| { | |
| int ret; | |
| memset(data, 0, sizeof(*data)); | |
| ret = ccp_init_sg_workarea(&data->sg_wa, cmd_q->ccp->dev, sg, sg_len, | |
| dir); | |
| if (ret) | |
| goto e_err; | |
| ret = ccp_init_dm_workarea(&data->dm_wa, cmd_q, dm_len, dir); | |
| if (ret) | |
| goto e_err; | |
| return 0; | |
| e_err: | |
| ccp_free_data(data, cmd_q); | |
| return ret; | |
| } | |
| static unsigned int ccp_queue_buf(struct ccp_data *data, unsigned int from) | |
| { | |
| struct ccp_sg_workarea *sg_wa = &data->sg_wa; | |
| struct ccp_dm_workarea *dm_wa = &data->dm_wa; | |
| unsigned int buf_count, nbytes; | |
| /* Clear the buffer if setting it */ | |
| if (!from) | |
| memset(dm_wa->address, 0, dm_wa->length); | |
| if (!sg_wa->sg) | |
| return 0; | |
| /* Perform the copy operation | |
| * nbytes will always be <= UINT_MAX because dm_wa->length is | |
| * an unsigned int | |
| */ | |
| nbytes = min_t(u64, sg_wa->bytes_left, dm_wa->length); | |
| scatterwalk_map_and_copy(dm_wa->address, sg_wa->sg, sg_wa->sg_used, | |
| nbytes, from); | |
| /* Update the structures and generate the count */ | |
| buf_count = 0; | |
| while (sg_wa->bytes_left && (buf_count < dm_wa->length)) { | |
| nbytes = min(sg_wa->sg->length - sg_wa->sg_used, | |
| dm_wa->length - buf_count); | |
| nbytes = min_t(u64, sg_wa->bytes_left, nbytes); | |
| buf_count += nbytes; | |
| ccp_update_sg_workarea(sg_wa, nbytes); | |
| } | |
| return buf_count; | |
| } | |
| static unsigned int ccp_fill_queue_buf(struct ccp_data *data) | |
| { | |
| return ccp_queue_buf(data, 0); | |
| } | |
| static unsigned int ccp_empty_queue_buf(struct ccp_data *data) | |
| { | |
| return ccp_queue_buf(data, 1); | |
| } | |
| static void ccp_prepare_data(struct ccp_data *src, struct ccp_data *dst, | |
| struct ccp_op *op, unsigned int block_size, | |
| bool blocksize_op) | |
| { | |
| unsigned int sg_src_len, sg_dst_len, op_len; | |
| /* The CCP can only DMA from/to one address each per operation. This | |
| * requires that we find the smallest DMA area between the source | |
| * and destination. The resulting len values will always be <= UINT_MAX | |
| * because the dma length is an unsigned int. | |
| */ | |
| sg_src_len = sg_dma_len(src->sg_wa.sg) - src->sg_wa.sg_used; | |
| sg_src_len = min_t(u64, src->sg_wa.bytes_left, sg_src_len); | |
| if (dst) { | |
| sg_dst_len = sg_dma_len(dst->sg_wa.sg) - dst->sg_wa.sg_used; | |
| sg_dst_len = min_t(u64, src->sg_wa.bytes_left, sg_dst_len); | |
| op_len = min(sg_src_len, sg_dst_len); | |
| } else { | |
| op_len = sg_src_len; | |
| } | |
| /* The data operation length will be at least block_size in length | |
| * or the smaller of available sg room remaining for the source or | |
| * the destination | |
| */ | |
| op_len = max(op_len, block_size); | |
| /* Unless we have to buffer data, there's no reason to wait */ | |
| op->soc = 0; | |
| if (sg_src_len < block_size) { | |
| /* Not enough data in the sg element, so it | |
| * needs to be buffered into a blocksize chunk | |
| */ | |
| int cp_len = ccp_fill_queue_buf(src); | |
| op->soc = 1; | |
| op->src.u.dma.address = src->dm_wa.dma.address; | |
| op->src.u.dma.offset = 0; | |
| op->src.u.dma.length = (blocksize_op) ? block_size : cp_len; | |
| } else { | |
| /* Enough data in the sg element, but we need to | |
| * adjust for any previously copied data | |
| */ | |
| op->src.u.dma.address = sg_dma_address(src->sg_wa.sg); | |
| op->src.u.dma.offset = src->sg_wa.sg_used; | |
| op->src.u.dma.length = op_len & ~(block_size - 1); | |
| ccp_update_sg_workarea(&src->sg_wa, op->src.u.dma.length); | |
| } | |
| if (dst) { | |
| if (sg_dst_len < block_size) { | |
| /* Not enough room in the sg element or we're on the | |
| * last piece of data (when using padding), so the | |
| * output needs to be buffered into a blocksize chunk | |
| */ | |
| op->soc = 1; | |
| op->dst.u.dma.address = dst->dm_wa.dma.address; | |
| op->dst.u.dma.offset = 0; | |
| op->dst.u.dma.length = op->src.u.dma.length; | |
| } else { | |
| /* Enough room in the sg element, but we need to | |
| * adjust for any previously used area | |
| */ | |
| op->dst.u.dma.address = sg_dma_address(dst->sg_wa.sg); | |
| op->dst.u.dma.offset = dst->sg_wa.sg_used; | |
| op->dst.u.dma.length = op->src.u.dma.length; | |
| } | |
| } | |
| } | |
| static void ccp_process_data(struct ccp_data *src, struct ccp_data *dst, | |
| struct ccp_op *op) | |
| { | |
| op->init = 0; | |
| if (dst) { | |
| if (op->dst.u.dma.address == dst->dm_wa.dma.address) | |
| ccp_empty_queue_buf(dst); | |
| else | |
| ccp_update_sg_workarea(&dst->sg_wa, | |
| op->dst.u.dma.length); | |
| } | |
| } | |
| static int ccp_copy_to_from_sb(struct ccp_cmd_queue *cmd_q, | |
| struct ccp_dm_workarea *wa, u32 jobid, u32 sb, | |
| u32 byte_swap, bool from) | |
| { | |
| struct ccp_op op; | |
| memset(&op, 0, sizeof(op)); | |
| op.cmd_q = cmd_q; | |
| op.jobid = jobid; | |
| op.eom = 1; | |
| if (from) { | |
| op.soc = 1; | |
| op.src.type = CCP_MEMTYPE_SB; | |
| op.src.u.sb = sb; | |
| op.dst.type = CCP_MEMTYPE_SYSTEM; | |
| op.dst.u.dma.address = wa->dma.address; | |
| op.dst.u.dma.length = wa->length; | |
| } else { | |
| op.src.type = CCP_MEMTYPE_SYSTEM; | |
| op.src.u.dma.address = wa->dma.address; | |
| op.src.u.dma.length = wa->length; | |
| op.dst.type = CCP_MEMTYPE_SB; | |
| op.dst.u.sb = sb; | |
| } | |
| op.u.passthru.byte_swap = byte_swap; | |
| return cmd_q->ccp->vdata->perform->passthru(&op); | |
| } | |
| static int ccp_copy_to_sb(struct ccp_cmd_queue *cmd_q, | |
| struct ccp_dm_workarea *wa, u32 jobid, u32 sb, | |
| u32 byte_swap) | |
| { | |
| return ccp_copy_to_from_sb(cmd_q, wa, jobid, sb, byte_swap, false); | |
| } | |
| static int ccp_copy_from_sb(struct ccp_cmd_queue *cmd_q, | |
| struct ccp_dm_workarea *wa, u32 jobid, u32 sb, | |
| u32 byte_swap) | |
| { | |
| return ccp_copy_to_from_sb(cmd_q, wa, jobid, sb, byte_swap, true); | |
| } | |
| static int ccp_run_aes_cmac_cmd(struct ccp_cmd_queue *cmd_q, | |
| struct ccp_cmd *cmd) | |
| { | |
| struct ccp_aes_engine *aes = &cmd->u.aes; | |
| struct ccp_dm_workarea key, ctx; | |
| struct ccp_data src; | |
| struct ccp_op op; | |
| unsigned int dm_offset; | |
| int ret; | |
| if (!((aes->key_len == AES_KEYSIZE_128) || | |
| (aes->key_len == AES_KEYSIZE_192) || | |
| (aes->key_len == AES_KEYSIZE_256))) | |
| return -EINVAL; | |
| if (aes->src_len & (AES_BLOCK_SIZE - 1)) | |
| return -EINVAL; | |
| if (aes->iv_len != AES_BLOCK_SIZE) | |
| return -EINVAL; | |
| if (!aes->key || !aes->iv || !aes->src) | |
| return -EINVAL; | |
| if (aes->cmac_final) { | |
| if (aes->cmac_key_len != AES_BLOCK_SIZE) | |
| return -EINVAL; | |
| if (!aes->cmac_key) | |
| return -EINVAL; | |
| } | |
| BUILD_BUG_ON(CCP_AES_KEY_SB_COUNT != 1); | |
| BUILD_BUG_ON(CCP_AES_CTX_SB_COUNT != 1); | |
| ret = -EIO; | |
| memset(&op, 0, sizeof(op)); | |
| op.cmd_q = cmd_q; | |
| op.jobid = CCP_NEW_JOBID(cmd_q->ccp); | |
| op.sb_key = cmd_q->sb_key; | |
| op.sb_ctx = cmd_q->sb_ctx; | |
| op.init = 1; | |
| op.u.aes.type = aes->type; | |
| op.u.aes.mode = aes->mode; | |
| op.u.aes.action = aes->action; | |
| /* All supported key sizes fit in a single (32-byte) SB entry | |
| * and must be in little endian format. Use the 256-bit byte | |
| * swap passthru option to convert from big endian to little | |
| * endian. | |
| */ | |
| ret = ccp_init_dm_workarea(&key, cmd_q, | |
| CCP_AES_KEY_SB_COUNT * CCP_SB_BYTES, | |
| DMA_TO_DEVICE); | |
| if (ret) | |
| return ret; | |
| dm_offset = CCP_SB_BYTES - aes->key_len; | |
| ccp_set_dm_area(&key, dm_offset, aes->key, 0, aes->key_len); | |
| ret = ccp_copy_to_sb(cmd_q, &key, op.jobid, op.sb_key, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_key; | |
| } | |
| /* The AES context fits in a single (32-byte) SB entry and | |
| * must be in little endian format. Use the 256-bit byte swap | |
| * passthru option to convert from big endian to little endian. | |
| */ | |
| ret = ccp_init_dm_workarea(&ctx, cmd_q, | |
| CCP_AES_CTX_SB_COUNT * CCP_SB_BYTES, | |
| DMA_BIDIRECTIONAL); | |
| if (ret) | |
| goto e_key; | |
| dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE; | |
| ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len); | |
| ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_ctx; | |
| } | |
| /* Send data to the CCP AES engine */ | |
| ret = ccp_init_data(&src, cmd_q, aes->src, aes->src_len, | |
| AES_BLOCK_SIZE, DMA_TO_DEVICE); | |
| if (ret) | |
| goto e_ctx; | |
| while (src.sg_wa.bytes_left) { | |
| ccp_prepare_data(&src, NULL, &op, AES_BLOCK_SIZE, true); | |
| if (aes->cmac_final && !src.sg_wa.bytes_left) { | |
| op.eom = 1; | |
| /* Push the K1/K2 key to the CCP now */ | |
| ret = ccp_copy_from_sb(cmd_q, &ctx, op.jobid, | |
| op.sb_ctx, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_src; | |
| } | |
| ccp_set_dm_area(&ctx, 0, aes->cmac_key, 0, | |
| aes->cmac_key_len); | |
| ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_src; | |
| } | |
| } | |
| ret = cmd_q->ccp->vdata->perform->aes(&op); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_src; | |
| } | |
| ccp_process_data(&src, NULL, &op); | |
| } | |
| /* Retrieve the AES context - convert from LE to BE using | |
| * 32-byte (256-bit) byteswapping | |
| */ | |
| ret = ccp_copy_from_sb(cmd_q, &ctx, op.jobid, op.sb_ctx, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_src; | |
| } | |
| /* ...but we only need AES_BLOCK_SIZE bytes */ | |
| dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE; | |
| ccp_get_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len); | |
| e_src: | |
| ccp_free_data(&src, cmd_q); | |
| e_ctx: | |
| ccp_dm_free(&ctx); | |
| e_key: | |
| ccp_dm_free(&key); | |
| return ret; | |
| } | |
| static int ccp_run_aes_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) | |
| { | |
| struct ccp_aes_engine *aes = &cmd->u.aes; | |
| struct ccp_dm_workarea key, ctx; | |
| struct ccp_data src, dst; | |
| struct ccp_op op; | |
| unsigned int dm_offset; | |
| bool in_place = false; | |
| int ret; | |
| if (aes->mode == CCP_AES_MODE_CMAC) | |
| return ccp_run_aes_cmac_cmd(cmd_q, cmd); | |
| if (!((aes->key_len == AES_KEYSIZE_128) || | |
| (aes->key_len == AES_KEYSIZE_192) || | |
| (aes->key_len == AES_KEYSIZE_256))) | |
| return -EINVAL; | |
| if (((aes->mode == CCP_AES_MODE_ECB) || | |
| (aes->mode == CCP_AES_MODE_CBC) || | |
| (aes->mode == CCP_AES_MODE_CFB)) && | |
| (aes->src_len & (AES_BLOCK_SIZE - 1))) | |
| return -EINVAL; | |
| if (!aes->key || !aes->src || !aes->dst) | |
| return -EINVAL; | |
| if (aes->mode != CCP_AES_MODE_ECB) { | |
| if (aes->iv_len != AES_BLOCK_SIZE) | |
| return -EINVAL; | |
| if (!aes->iv) | |
| return -EINVAL; | |
| } | |
| BUILD_BUG_ON(CCP_AES_KEY_SB_COUNT != 1); | |
| BUILD_BUG_ON(CCP_AES_CTX_SB_COUNT != 1); | |
| ret = -EIO; | |
| memset(&op, 0, sizeof(op)); | |
| op.cmd_q = cmd_q; | |
| op.jobid = CCP_NEW_JOBID(cmd_q->ccp); | |
| op.sb_key = cmd_q->sb_key; | |
| op.sb_ctx = cmd_q->sb_ctx; | |
| op.init = (aes->mode == CCP_AES_MODE_ECB) ? 0 : 1; | |
| op.u.aes.type = aes->type; | |
| op.u.aes.mode = aes->mode; | |
| op.u.aes.action = aes->action; | |
| /* All supported key sizes fit in a single (32-byte) SB entry | |
| * and must be in little endian format. Use the 256-bit byte | |
| * swap passthru option to convert from big endian to little | |
| * endian. | |
| */ | |
| ret = ccp_init_dm_workarea(&key, cmd_q, | |
| CCP_AES_KEY_SB_COUNT * CCP_SB_BYTES, | |
| DMA_TO_DEVICE); | |
| if (ret) | |
| return ret; | |
| dm_offset = CCP_SB_BYTES - aes->key_len; | |
| ccp_set_dm_area(&key, dm_offset, aes->key, 0, aes->key_len); | |
| ret = ccp_copy_to_sb(cmd_q, &key, op.jobid, op.sb_key, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_key; | |
| } | |
| /* The AES context fits in a single (32-byte) SB entry and | |
| * must be in little endian format. Use the 256-bit byte swap | |
| * passthru option to convert from big endian to little endian. | |
| */ | |
| ret = ccp_init_dm_workarea(&ctx, cmd_q, | |
| CCP_AES_CTX_SB_COUNT * CCP_SB_BYTES, | |
| DMA_BIDIRECTIONAL); | |
| if (ret) | |
| goto e_key; | |
| if (aes->mode != CCP_AES_MODE_ECB) { | |
| /* Load the AES context - convert to LE */ | |
| dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE; | |
| ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len); | |
| ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_ctx; | |
| } | |
| } | |
| /* Prepare the input and output data workareas. For in-place | |
| * operations we need to set the dma direction to BIDIRECTIONAL | |
| * and copy the src workarea to the dst workarea. | |
| */ | |
| if (sg_virt(aes->src) == sg_virt(aes->dst)) | |
| in_place = true; | |
| ret = ccp_init_data(&src, cmd_q, aes->src, aes->src_len, | |
| AES_BLOCK_SIZE, | |
| in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); | |
| if (ret) | |
| goto e_ctx; | |
| if (in_place) { | |
| dst = src; | |
| } else { | |
| ret = ccp_init_data(&dst, cmd_q, aes->dst, aes->src_len, | |
| AES_BLOCK_SIZE, DMA_FROM_DEVICE); | |
| if (ret) | |
| goto e_src; | |
| } | |
| /* Send data to the CCP AES engine */ | |
| while (src.sg_wa.bytes_left) { | |
| ccp_prepare_data(&src, &dst, &op, AES_BLOCK_SIZE, true); | |
| if (!src.sg_wa.bytes_left) { | |
| op.eom = 1; | |
| /* Since we don't retrieve the AES context in ECB | |
| * mode we have to wait for the operation to complete | |
| * on the last piece of data | |
| */ | |
| if (aes->mode == CCP_AES_MODE_ECB) | |
| op.soc = 1; | |
| } | |
| ret = cmd_q->ccp->vdata->perform->aes(&op); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_dst; | |
| } | |
| ccp_process_data(&src, &dst, &op); | |
| } | |
| if (aes->mode != CCP_AES_MODE_ECB) { | |
| /* Retrieve the AES context - convert from LE to BE using | |
| * 32-byte (256-bit) byteswapping | |
| */ | |
| ret = ccp_copy_from_sb(cmd_q, &ctx, op.jobid, op.sb_ctx, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_dst; | |
| } | |
| /* ...but we only need AES_BLOCK_SIZE bytes */ | |
| dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE; | |
| ccp_get_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len); | |
| } | |
| e_dst: | |
| if (!in_place) | |
| ccp_free_data(&dst, cmd_q); | |
| e_src: | |
| ccp_free_data(&src, cmd_q); | |
| e_ctx: | |
| ccp_dm_free(&ctx); | |
| e_key: | |
| ccp_dm_free(&key); | |
| return ret; | |
| } | |
| static int ccp_run_xts_aes_cmd(struct ccp_cmd_queue *cmd_q, | |
| struct ccp_cmd *cmd) | |
| { | |
| struct ccp_xts_aes_engine *xts = &cmd->u.xts; | |
| struct ccp_dm_workarea key, ctx; | |
| struct ccp_data src, dst; | |
| struct ccp_op op; | |
| unsigned int unit_size, dm_offset; | |
| bool in_place = false; | |
| int ret; | |
| switch (xts->unit_size) { | |
| case CCP_XTS_AES_UNIT_SIZE_16: | |
| unit_size = 16; | |
| break; | |
| case CCP_XTS_AES_UNIT_SIZE_512: | |
| unit_size = 512; | |
| break; | |
| case CCP_XTS_AES_UNIT_SIZE_1024: | |
| unit_size = 1024; | |
| break; | |
| case CCP_XTS_AES_UNIT_SIZE_2048: | |
| unit_size = 2048; | |
| break; | |
| case CCP_XTS_AES_UNIT_SIZE_4096: | |
| unit_size = 4096; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (xts->key_len != AES_KEYSIZE_128) | |
| return -EINVAL; | |
| if (!xts->final && (xts->src_len & (AES_BLOCK_SIZE - 1))) | |
| return -EINVAL; | |
| if (xts->iv_len != AES_BLOCK_SIZE) | |
| return -EINVAL; | |
| if (!xts->key || !xts->iv || !xts->src || !xts->dst) | |
| return -EINVAL; | |
| BUILD_BUG_ON(CCP_XTS_AES_KEY_SB_COUNT != 1); | |
| BUILD_BUG_ON(CCP_XTS_AES_CTX_SB_COUNT != 1); | |
| ret = -EIO; | |
| memset(&op, 0, sizeof(op)); | |
| op.cmd_q = cmd_q; | |
| op.jobid = CCP_NEW_JOBID(cmd_q->ccp); | |
| op.sb_key = cmd_q->sb_key; | |
| op.sb_ctx = cmd_q->sb_ctx; | |
| op.init = 1; | |
| op.u.xts.action = xts->action; | |
| op.u.xts.unit_size = xts->unit_size; | |
| /* All supported key sizes fit in a single (32-byte) SB entry | |
| * and must be in little endian format. Use the 256-bit byte | |
| * swap passthru option to convert from big endian to little | |
| * endian. | |
| */ | |
| ret = ccp_init_dm_workarea(&key, cmd_q, | |
| CCP_XTS_AES_KEY_SB_COUNT * CCP_SB_BYTES, | |
| DMA_TO_DEVICE); | |
| if (ret) | |
| return ret; | |
| dm_offset = CCP_SB_BYTES - AES_KEYSIZE_128; | |
| ccp_set_dm_area(&key, dm_offset, xts->key, 0, xts->key_len); | |
| ccp_set_dm_area(&key, 0, xts->key, dm_offset, xts->key_len); | |
| ret = ccp_copy_to_sb(cmd_q, &key, op.jobid, op.sb_key, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_key; | |
| } | |
| /* The AES context fits in a single (32-byte) SB entry and | |
| * for XTS is already in little endian format so no byte swapping | |
| * is needed. | |
| */ | |
| ret = ccp_init_dm_workarea(&ctx, cmd_q, | |
| CCP_XTS_AES_CTX_SB_COUNT * CCP_SB_BYTES, | |
| DMA_BIDIRECTIONAL); | |
| if (ret) | |
| goto e_key; | |
| ccp_set_dm_area(&ctx, 0, xts->iv, 0, xts->iv_len); | |
| ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx, | |
| CCP_PASSTHRU_BYTESWAP_NOOP); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_ctx; | |
| } | |
| /* Prepare the input and output data workareas. For in-place | |
| * operations we need to set the dma direction to BIDIRECTIONAL | |
| * and copy the src workarea to the dst workarea. | |
| */ | |
| if (sg_virt(xts->src) == sg_virt(xts->dst)) | |
| in_place = true; | |
| ret = ccp_init_data(&src, cmd_q, xts->src, xts->src_len, | |
| unit_size, | |
| in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); | |
| if (ret) | |
| goto e_ctx; | |
| if (in_place) { | |
| dst = src; | |
| } else { | |
| ret = ccp_init_data(&dst, cmd_q, xts->dst, xts->src_len, | |
| unit_size, DMA_FROM_DEVICE); | |
| if (ret) | |
| goto e_src; | |
| } | |
| /* Send data to the CCP AES engine */ | |
| while (src.sg_wa.bytes_left) { | |
| ccp_prepare_data(&src, &dst, &op, unit_size, true); | |
| if (!src.sg_wa.bytes_left) | |
| op.eom = 1; | |
| ret = cmd_q->ccp->vdata->perform->xts_aes(&op); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_dst; | |
| } | |
| ccp_process_data(&src, &dst, &op); | |
| } | |
| /* Retrieve the AES context - convert from LE to BE using | |
| * 32-byte (256-bit) byteswapping | |
| */ | |
| ret = ccp_copy_from_sb(cmd_q, &ctx, op.jobid, op.sb_ctx, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_dst; | |
| } | |
| /* ...but we only need AES_BLOCK_SIZE bytes */ | |
| dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE; | |
| ccp_get_dm_area(&ctx, dm_offset, xts->iv, 0, xts->iv_len); | |
| e_dst: | |
| if (!in_place) | |
| ccp_free_data(&dst, cmd_q); | |
| e_src: | |
| ccp_free_data(&src, cmd_q); | |
| e_ctx: | |
| ccp_dm_free(&ctx); | |
| e_key: | |
| ccp_dm_free(&key); | |
| return ret; | |
| } | |
| static int ccp_run_sha_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) | |
| { | |
| struct ccp_sha_engine *sha = &cmd->u.sha; | |
| struct ccp_dm_workarea ctx; | |
| struct ccp_data src; | |
| struct ccp_op op; | |
| unsigned int ioffset, ooffset; | |
| unsigned int digest_size; | |
| int sb_count; | |
| const void *init; | |
| u64 block_size; | |
| int ctx_size; | |
| int ret; | |
| switch (sha->type) { | |
| case CCP_SHA_TYPE_1: | |
| if (sha->ctx_len < SHA1_DIGEST_SIZE) | |
| return -EINVAL; | |
| block_size = SHA1_BLOCK_SIZE; | |
| break; | |
| case CCP_SHA_TYPE_224: | |
| if (sha->ctx_len < SHA224_DIGEST_SIZE) | |
| return -EINVAL; | |
| block_size = SHA224_BLOCK_SIZE; | |
| break; | |
| case CCP_SHA_TYPE_256: | |
| if (sha->ctx_len < SHA256_DIGEST_SIZE) | |
| return -EINVAL; | |
| block_size = SHA256_BLOCK_SIZE; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (!sha->ctx) | |
| return -EINVAL; | |
| if (!sha->final && (sha->src_len & (block_size - 1))) | |
| return -EINVAL; | |
| /* The version 3 device can't handle zero-length input */ | |
| if (cmd_q->ccp->vdata->version == CCP_VERSION(3, 0)) { | |
| if (!sha->src_len) { | |
| unsigned int digest_len; | |
| const u8 *sha_zero; | |
| /* Not final, just return */ | |
| if (!sha->final) | |
| return 0; | |
| /* CCP can't do a zero length sha operation so the | |
| * caller must buffer the data. | |
| */ | |
| if (sha->msg_bits) | |
| return -EINVAL; | |
| /* The CCP cannot perform zero-length sha operations | |
| * so the caller is required to buffer data for the | |
| * final operation. However, a sha operation for a | |
| * message with a total length of zero is valid so | |
| * known values are required to supply the result. | |
| */ | |
| switch (sha->type) { | |
| case CCP_SHA_TYPE_1: | |
| sha_zero = sha1_zero_message_hash; | |
| digest_len = SHA1_DIGEST_SIZE; | |
| break; | |
| case CCP_SHA_TYPE_224: | |
| sha_zero = sha224_zero_message_hash; | |
| digest_len = SHA224_DIGEST_SIZE; | |
| break; | |
| case CCP_SHA_TYPE_256: | |
| sha_zero = sha256_zero_message_hash; | |
| digest_len = SHA256_DIGEST_SIZE; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| scatterwalk_map_and_copy((void *)sha_zero, sha->ctx, 0, | |
| digest_len, 1); | |
| return 0; | |
| } | |
| } | |
| /* Set variables used throughout */ | |
| switch (sha->type) { | |
| case CCP_SHA_TYPE_1: | |
| digest_size = SHA1_DIGEST_SIZE; | |
| init = (void *) ccp_sha1_init; | |
| ctx_size = SHA1_DIGEST_SIZE; | |
| sb_count = 1; | |
| if (cmd_q->ccp->vdata->version != CCP_VERSION(3, 0)) | |
| ooffset = ioffset = CCP_SB_BYTES - SHA1_DIGEST_SIZE; | |
| else | |
| ooffset = ioffset = 0; | |
| break; | |
| case CCP_SHA_TYPE_224: | |
| digest_size = SHA224_DIGEST_SIZE; | |
| init = (void *) ccp_sha224_init; | |
| ctx_size = SHA256_DIGEST_SIZE; | |
| sb_count = 1; | |
| ioffset = 0; | |
| if (cmd_q->ccp->vdata->version != CCP_VERSION(3, 0)) | |
| ooffset = CCP_SB_BYTES - SHA224_DIGEST_SIZE; | |
| else | |
| ooffset = 0; | |
| break; | |
| case CCP_SHA_TYPE_256: | |
| digest_size = SHA256_DIGEST_SIZE; | |
| init = (void *) ccp_sha256_init; | |
| ctx_size = SHA256_DIGEST_SIZE; | |
| sb_count = 1; | |
| ooffset = ioffset = 0; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto e_data; | |
| } | |
| /* For zero-length plaintext the src pointer is ignored; | |
| * otherwise both parts must be valid | |
| */ | |
| if (sha->src_len && !sha->src) | |
| return -EINVAL; | |
| memset(&op, 0, sizeof(op)); | |
| op.cmd_q = cmd_q; | |
| op.jobid = CCP_NEW_JOBID(cmd_q->ccp); | |
| op.sb_ctx = cmd_q->sb_ctx; /* Pre-allocated */ | |
| op.u.sha.type = sha->type; | |
| op.u.sha.msg_bits = sha->msg_bits; | |
| ret = ccp_init_dm_workarea(&ctx, cmd_q, sb_count * CCP_SB_BYTES, | |
| DMA_BIDIRECTIONAL); | |
| if (ret) | |
| return ret; | |
| if (sha->first) { | |
| switch (sha->type) { | |
| case CCP_SHA_TYPE_1: | |
| case CCP_SHA_TYPE_224: | |
| case CCP_SHA_TYPE_256: | |
| memcpy(ctx.address + ioffset, init, ctx_size); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto e_ctx; | |
| } | |
| } else { | |
| /* Restore the context */ | |
| ccp_set_dm_area(&ctx, 0, sha->ctx, 0, | |
| sb_count * CCP_SB_BYTES); | |
| } | |
| ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_ctx; | |
| } | |
| if (sha->src) { | |
| /* Send data to the CCP SHA engine; block_size is set above */ | |
| ret = ccp_init_data(&src, cmd_q, sha->src, sha->src_len, | |
| block_size, DMA_TO_DEVICE); | |
| if (ret) | |
| goto e_ctx; | |
| while (src.sg_wa.bytes_left) { | |
| ccp_prepare_data(&src, NULL, &op, block_size, false); | |
| if (sha->final && !src.sg_wa.bytes_left) | |
| op.eom = 1; | |
| ret = cmd_q->ccp->vdata->perform->sha(&op); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_data; | |
| } | |
| ccp_process_data(&src, NULL, &op); | |
| } | |
| } else { | |
| op.eom = 1; | |
| ret = cmd_q->ccp->vdata->perform->sha(&op); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_data; | |
| } | |
| } | |
| /* Retrieve the SHA context - convert from LE to BE using | |
| * 32-byte (256-bit) byteswapping to BE | |
| */ | |
| ret = ccp_copy_from_sb(cmd_q, &ctx, op.jobid, op.sb_ctx, | |
| CCP_PASSTHRU_BYTESWAP_256BIT); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_data; | |
| } | |
| if (sha->final) { | |
| /* Finishing up, so get the digest */ | |
| switch (sha->type) { | |
| case CCP_SHA_TYPE_1: | |
| case CCP_SHA_TYPE_224: | |
| case CCP_SHA_TYPE_256: | |
| ccp_get_dm_area(&ctx, ooffset, | |
| sha->ctx, 0, | |
| digest_size); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto e_ctx; | |
| } | |
| } else { | |
| /* Stash the context */ | |
| ccp_get_dm_area(&ctx, 0, sha->ctx, 0, | |
| sb_count * CCP_SB_BYTES); | |
| } | |
| if (sha->final && sha->opad) { | |
| /* HMAC operation, recursively perform final SHA */ | |
| struct ccp_cmd hmac_cmd; | |
| struct scatterlist sg; | |
| u8 *hmac_buf; | |
| if (sha->opad_len != block_size) { | |
| ret = -EINVAL; | |
| goto e_data; | |
| } | |
| hmac_buf = kmalloc(block_size + digest_size, GFP_KERNEL); | |
| if (!hmac_buf) { | |
| ret = -ENOMEM; | |
| goto e_data; | |
| } | |
| sg_init_one(&sg, hmac_buf, block_size + digest_size); | |
| scatterwalk_map_and_copy(hmac_buf, sha->opad, 0, block_size, 0); | |
| switch (sha->type) { | |
| case CCP_SHA_TYPE_1: | |
| case CCP_SHA_TYPE_224: | |
| case CCP_SHA_TYPE_256: | |
| memcpy(hmac_buf + block_size, | |
| ctx.address + ooffset, | |
| digest_size); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto e_ctx; | |
| } | |
| memset(&hmac_cmd, 0, sizeof(hmac_cmd)); | |
| hmac_cmd.engine = CCP_ENGINE_SHA; | |
| hmac_cmd.u.sha.type = sha->type; | |
| hmac_cmd.u.sha.ctx = sha->ctx; | |
| hmac_cmd.u.sha.ctx_len = sha->ctx_len; | |
| hmac_cmd.u.sha.src = &sg; | |
| hmac_cmd.u.sha.src_len = block_size + digest_size; | |
| hmac_cmd.u.sha.opad = NULL; | |
| hmac_cmd.u.sha.opad_len = 0; | |
| hmac_cmd.u.sha.first = 1; | |
| hmac_cmd.u.sha.final = 1; | |
| hmac_cmd.u.sha.msg_bits = (block_size + digest_size) << 3; | |
| ret = ccp_run_sha_cmd(cmd_q, &hmac_cmd); | |
| if (ret) | |
| cmd->engine_error = hmac_cmd.engine_error; | |
| kfree(hmac_buf); | |
| } | |
| e_data: | |
| if (sha->src) | |
| ccp_free_data(&src, cmd_q); | |
| e_ctx: | |
| ccp_dm_free(&ctx); | |
| return ret; | |
| } | |
| static int ccp_run_rsa_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) | |
| { | |
| struct ccp_rsa_engine *rsa = &cmd->u.rsa; | |
| struct ccp_dm_workarea exp, src; | |
| struct ccp_data dst; | |
| struct ccp_op op; | |
| unsigned int sb_count, i_len, o_len; | |
| int ret; | |
| if (rsa->key_size > CCP_RSA_MAX_WIDTH) | |
| return -EINVAL; | |
| if (!rsa->exp || !rsa->mod || !rsa->src || !rsa->dst) | |
| return -EINVAL; | |
| /* The RSA modulus must precede the message being acted upon, so | |
| * it must be copied to a DMA area where the message and the | |
| * modulus can be concatenated. Therefore the input buffer | |
| * length required is twice the output buffer length (which | |
| * must be a multiple of 256-bits). | |
| */ | |
| o_len = ((rsa->key_size + 255) / 256) * 32; | |
| i_len = o_len * 2; | |
| sb_count = o_len / CCP_SB_BYTES; | |
| memset(&op, 0, sizeof(op)); | |
| op.cmd_q = cmd_q; | |
| op.jobid = ccp_gen_jobid(cmd_q->ccp); | |
| op.sb_key = cmd_q->ccp->vdata->perform->sballoc(cmd_q, sb_count); | |
| if (!op.sb_key) | |
| return -EIO; | |
| /* The RSA exponent may span multiple (32-byte) SB entries and must | |
| * be in little endian format. Reverse copy each 32-byte chunk | |
| * of the exponent (En chunk to E0 chunk, E(n-1) chunk to E1 chunk) | |
| * and each byte within that chunk and do not perform any byte swap | |
| * operations on the passthru operation. | |
| */ | |
| ret = ccp_init_dm_workarea(&exp, cmd_q, o_len, DMA_TO_DEVICE); | |
| if (ret) | |
| goto e_sb; | |
| ret = ccp_reverse_set_dm_area(&exp, rsa->exp, rsa->exp_len, | |
| CCP_SB_BYTES, false); | |
| if (ret) | |
| goto e_exp; | |
| ret = ccp_copy_to_sb(cmd_q, &exp, op.jobid, op.sb_key, | |
| CCP_PASSTHRU_BYTESWAP_NOOP); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_exp; | |
| } | |
| /* Concatenate the modulus and the message. Both the modulus and | |
| * the operands must be in little endian format. Since the input | |
| * is in big endian format it must be converted. | |
| */ | |
| ret = ccp_init_dm_workarea(&src, cmd_q, i_len, DMA_TO_DEVICE); | |
| if (ret) | |
| goto e_exp; | |
| ret = ccp_reverse_set_dm_area(&src, rsa->mod, rsa->mod_len, | |
| CCP_SB_BYTES, false); | |
| if (ret) | |
| goto e_src; | |
| src.address += o_len; /* Adjust the address for the copy operation */ | |
| ret = ccp_reverse_set_dm_area(&src, rsa->src, rsa->src_len, | |
| CCP_SB_BYTES, false); | |
| if (ret) | |
| goto e_src; | |
| src.address -= o_len; /* Reset the address to original value */ | |
| /* Prepare the output area for the operation */ | |
| ret = ccp_init_data(&dst, cmd_q, rsa->dst, rsa->mod_len, | |
| o_len, DMA_FROM_DEVICE); | |
| if (ret) | |
| goto e_src; | |
| op.soc = 1; | |
| op.src.u.dma.address = src.dma.address; | |
| op.src.u.dma.offset = 0; | |
| op.src.u.dma.length = i_len; | |
| op.dst.u.dma.address = dst.dm_wa.dma.address; | |
| op.dst.u.dma.offset = 0; | |
| op.dst.u.dma.length = o_len; | |
| op.u.rsa.mod_size = rsa->key_size; | |
| op.u.rsa.input_len = i_len; | |
| ret = cmd_q->ccp->vdata->perform->rsa(&op); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_dst; | |
| } | |
| ccp_reverse_get_dm_area(&dst.dm_wa, rsa->dst, rsa->mod_len); | |
| e_dst: | |
| ccp_free_data(&dst, cmd_q); | |
| e_src: | |
| ccp_dm_free(&src); | |
| e_exp: | |
| ccp_dm_free(&exp); | |
| e_sb: | |
| cmd_q->ccp->vdata->perform->sbfree(cmd_q, op.sb_key, sb_count); | |
| return ret; | |
| } | |
| static int ccp_run_passthru_cmd(struct ccp_cmd_queue *cmd_q, | |
| struct ccp_cmd *cmd) | |
| { | |
| struct ccp_passthru_engine *pt = &cmd->u.passthru; | |
| struct ccp_dm_workarea mask; | |
| struct ccp_data src, dst; | |
| struct ccp_op op; | |
| bool in_place = false; | |
| unsigned int i; | |
| int ret = 0; | |
| if (!pt->final && (pt->src_len & (CCP_PASSTHRU_BLOCKSIZE - 1))) | |
| return -EINVAL; | |
| if (!pt->src || !pt->dst) | |
| return -EINVAL; | |
| if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) { | |
| if (pt->mask_len != CCP_PASSTHRU_MASKSIZE) | |
| return -EINVAL; | |
| if (!pt->mask) | |
| return -EINVAL; | |
| } | |
| BUILD_BUG_ON(CCP_PASSTHRU_SB_COUNT != 1); | |
| memset(&op, 0, sizeof(op)); | |
| op.cmd_q = cmd_q; | |
| op.jobid = CCP_NEW_JOBID(cmd_q->ccp); | |
| if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) { | |
| /* Load the mask */ | |
| op.sb_key = cmd_q->sb_key; | |
| ret = ccp_init_dm_workarea(&mask, cmd_q, | |
| CCP_PASSTHRU_SB_COUNT * | |
| CCP_SB_BYTES, | |
| DMA_TO_DEVICE); | |
| if (ret) | |
| return ret; | |
| ccp_set_dm_area(&mask, 0, pt->mask, 0, pt->mask_len); | |
| ret = ccp_copy_to_sb(cmd_q, &mask, op.jobid, op.sb_key, | |
| CCP_PASSTHRU_BYTESWAP_NOOP); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_mask; | |
| } | |
| } | |
| /* Prepare the input and output data workareas. For in-place | |
| * operations we need to set the dma direction to BIDIRECTIONAL | |
| * and copy the src workarea to the dst workarea. | |
| */ | |
| if (sg_virt(pt->src) == sg_virt(pt->dst)) | |
| in_place = true; | |
| ret = ccp_init_data(&src, cmd_q, pt->src, pt->src_len, | |
| CCP_PASSTHRU_MASKSIZE, | |
| in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); | |
| if (ret) | |
| goto e_mask; | |
| if (in_place) { | |
| dst = src; | |
| } else { | |
| ret = ccp_init_data(&dst, cmd_q, pt->dst, pt->src_len, | |
| CCP_PASSTHRU_MASKSIZE, DMA_FROM_DEVICE); | |
| if (ret) | |
| goto e_src; | |
| } | |
| /* Send data to the CCP Passthru engine | |
| * Because the CCP engine works on a single source and destination | |
| * dma address at a time, each entry in the source scatterlist | |
| * (after the dma_map_sg call) must be less than or equal to the | |
| * (remaining) length in the destination scatterlist entry and the | |
| * length must be a multiple of CCP_PASSTHRU_BLOCKSIZE | |
| */ | |
| dst.sg_wa.sg_used = 0; | |
| for (i = 1; i <= src.sg_wa.dma_count; i++) { | |
| if (!dst.sg_wa.sg || | |
| (dst.sg_wa.sg->length < src.sg_wa.sg->length)) { | |
| ret = -EINVAL; | |
| goto e_dst; | |
| } | |
| if (i == src.sg_wa.dma_count) { | |
| op.eom = 1; | |
| op.soc = 1; | |
| } | |
| op.src.type = CCP_MEMTYPE_SYSTEM; | |
| op.src.u.dma.address = sg_dma_address(src.sg_wa.sg); | |
| op.src.u.dma.offset = 0; | |
| op.src.u.dma.length = sg_dma_len(src.sg_wa.sg); | |
| op.dst.type = CCP_MEMTYPE_SYSTEM; | |
| op.dst.u.dma.address = sg_dma_address(dst.sg_wa.sg); | |
| op.dst.u.dma.offset = dst.sg_wa.sg_used; | |
| op.dst.u.dma.length = op.src.u.dma.length; | |
| ret = cmd_q->ccp->vdata->perform->passthru(&op); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_dst; | |
| } | |
| dst.sg_wa.sg_used += src.sg_wa.sg->length; | |
| if (dst.sg_wa.sg_used == dst.sg_wa.sg->length) { | |
| dst.sg_wa.sg = sg_next(dst.sg_wa.sg); | |
| dst.sg_wa.sg_used = 0; | |
| } | |
| src.sg_wa.sg = sg_next(src.sg_wa.sg); | |
| } | |
| e_dst: | |
| if (!in_place) | |
| ccp_free_data(&dst, cmd_q); | |
| e_src: | |
| ccp_free_data(&src, cmd_q); | |
| e_mask: | |
| if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) | |
| ccp_dm_free(&mask); | |
| return ret; | |
| } | |
| static int ccp_run_passthru_nomap_cmd(struct ccp_cmd_queue *cmd_q, | |
| struct ccp_cmd *cmd) | |
| { | |
| struct ccp_passthru_nomap_engine *pt = &cmd->u.passthru_nomap; | |
| struct ccp_dm_workarea mask; | |
| struct ccp_op op; | |
| int ret; | |
| if (!pt->final && (pt->src_len & (CCP_PASSTHRU_BLOCKSIZE - 1))) | |
| return -EINVAL; | |
| if (!pt->src_dma || !pt->dst_dma) | |
| return -EINVAL; | |
| if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) { | |
| if (pt->mask_len != CCP_PASSTHRU_MASKSIZE) | |
| return -EINVAL; | |
| if (!pt->mask) | |
| return -EINVAL; | |
| } | |
| BUILD_BUG_ON(CCP_PASSTHRU_SB_COUNT != 1); | |
| memset(&op, 0, sizeof(op)); | |
| op.cmd_q = cmd_q; | |
| op.jobid = ccp_gen_jobid(cmd_q->ccp); | |
| if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) { | |
| /* Load the mask */ | |
| op.sb_key = cmd_q->sb_key; | |
| mask.length = pt->mask_len; | |
| mask.dma.address = pt->mask; | |
| mask.dma.length = pt->mask_len; | |
| ret = ccp_copy_to_sb(cmd_q, &mask, op.jobid, op.sb_key, | |
| CCP_PASSTHRU_BYTESWAP_NOOP); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| return ret; | |
| } | |
| } | |
| /* Send data to the CCP Passthru engine */ | |
| op.eom = 1; | |
| op.soc = 1; | |
| op.src.type = CCP_MEMTYPE_SYSTEM; | |
| op.src.u.dma.address = pt->src_dma; | |
| op.src.u.dma.offset = 0; | |
| op.src.u.dma.length = pt->src_len; | |
| op.dst.type = CCP_MEMTYPE_SYSTEM; | |
| op.dst.u.dma.address = pt->dst_dma; | |
| op.dst.u.dma.offset = 0; | |
| op.dst.u.dma.length = pt->src_len; | |
| ret = cmd_q->ccp->vdata->perform->passthru(&op); | |
| if (ret) | |
| cmd->engine_error = cmd_q->cmd_error; | |
| return ret; | |
| } | |
| static int ccp_run_ecc_mm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) | |
| { | |
| struct ccp_ecc_engine *ecc = &cmd->u.ecc; | |
| struct ccp_dm_workarea src, dst; | |
| struct ccp_op op; | |
| int ret; | |
| u8 *save; | |
| if (!ecc->u.mm.operand_1 || | |
| (ecc->u.mm.operand_1_len > CCP_ECC_MODULUS_BYTES)) | |
| return -EINVAL; | |
| if (ecc->function != CCP_ECC_FUNCTION_MINV_384BIT) | |
| if (!ecc->u.mm.operand_2 || | |
| (ecc->u.mm.operand_2_len > CCP_ECC_MODULUS_BYTES)) | |
| return -EINVAL; | |
| if (!ecc->u.mm.result || | |
| (ecc->u.mm.result_len < CCP_ECC_MODULUS_BYTES)) | |
| return -EINVAL; | |
| memset(&op, 0, sizeof(op)); | |
| op.cmd_q = cmd_q; | |
| op.jobid = CCP_NEW_JOBID(cmd_q->ccp); | |
| /* Concatenate the modulus and the operands. Both the modulus and | |
| * the operands must be in little endian format. Since the input | |
| * is in big endian format it must be converted and placed in a | |
| * fixed length buffer. | |
| */ | |
| ret = ccp_init_dm_workarea(&src, cmd_q, CCP_ECC_SRC_BUF_SIZE, | |
| DMA_TO_DEVICE); | |
| if (ret) | |
| return ret; | |
| /* Save the workarea address since it is updated in order to perform | |
| * the concatenation | |
| */ | |
| save = src.address; | |
| /* Copy the ECC modulus */ | |
| ret = ccp_reverse_set_dm_area(&src, ecc->mod, ecc->mod_len, | |
| CCP_ECC_OPERAND_SIZE, false); | |
| if (ret) | |
| goto e_src; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| /* Copy the first operand */ | |
| ret = ccp_reverse_set_dm_area(&src, ecc->u.mm.operand_1, | |
| ecc->u.mm.operand_1_len, | |
| CCP_ECC_OPERAND_SIZE, false); | |
| if (ret) | |
| goto e_src; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| if (ecc->function != CCP_ECC_FUNCTION_MINV_384BIT) { | |
| /* Copy the second operand */ | |
| ret = ccp_reverse_set_dm_area(&src, ecc->u.mm.operand_2, | |
| ecc->u.mm.operand_2_len, | |
| CCP_ECC_OPERAND_SIZE, false); | |
| if (ret) | |
| goto e_src; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| } | |
| /* Restore the workarea address */ | |
| src.address = save; | |
| /* Prepare the output area for the operation */ | |
| ret = ccp_init_dm_workarea(&dst, cmd_q, CCP_ECC_DST_BUF_SIZE, | |
| DMA_FROM_DEVICE); | |
| if (ret) | |
| goto e_src; | |
| op.soc = 1; | |
| op.src.u.dma.address = src.dma.address; | |
| op.src.u.dma.offset = 0; | |
| op.src.u.dma.length = src.length; | |
| op.dst.u.dma.address = dst.dma.address; | |
| op.dst.u.dma.offset = 0; | |
| op.dst.u.dma.length = dst.length; | |
| op.u.ecc.function = cmd->u.ecc.function; | |
| ret = cmd_q->ccp->vdata->perform->ecc(&op); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_dst; | |
| } | |
| ecc->ecc_result = le16_to_cpup( | |
| (const __le16 *)(dst.address + CCP_ECC_RESULT_OFFSET)); | |
| if (!(ecc->ecc_result & CCP_ECC_RESULT_SUCCESS)) { | |
| ret = -EIO; | |
| goto e_dst; | |
| } | |
| /* Save the ECC result */ | |
| ccp_reverse_get_dm_area(&dst, ecc->u.mm.result, CCP_ECC_MODULUS_BYTES); | |
| e_dst: | |
| ccp_dm_free(&dst); | |
| e_src: | |
| ccp_dm_free(&src); | |
| return ret; | |
| } | |
| static int ccp_run_ecc_pm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) | |
| { | |
| struct ccp_ecc_engine *ecc = &cmd->u.ecc; | |
| struct ccp_dm_workarea src, dst; | |
| struct ccp_op op; | |
| int ret; | |
| u8 *save; | |
| if (!ecc->u.pm.point_1.x || | |
| (ecc->u.pm.point_1.x_len > CCP_ECC_MODULUS_BYTES) || | |
| !ecc->u.pm.point_1.y || | |
| (ecc->u.pm.point_1.y_len > CCP_ECC_MODULUS_BYTES)) | |
| return -EINVAL; | |
| if (ecc->function == CCP_ECC_FUNCTION_PADD_384BIT) { | |
| if (!ecc->u.pm.point_2.x || | |
| (ecc->u.pm.point_2.x_len > CCP_ECC_MODULUS_BYTES) || | |
| !ecc->u.pm.point_2.y || | |
| (ecc->u.pm.point_2.y_len > CCP_ECC_MODULUS_BYTES)) | |
| return -EINVAL; | |
| } else { | |
| if (!ecc->u.pm.domain_a || | |
| (ecc->u.pm.domain_a_len > CCP_ECC_MODULUS_BYTES)) | |
| return -EINVAL; | |
| if (ecc->function == CCP_ECC_FUNCTION_PMUL_384BIT) | |
| if (!ecc->u.pm.scalar || | |
| (ecc->u.pm.scalar_len > CCP_ECC_MODULUS_BYTES)) | |
| return -EINVAL; | |
| } | |
| if (!ecc->u.pm.result.x || | |
| (ecc->u.pm.result.x_len < CCP_ECC_MODULUS_BYTES) || | |
| !ecc->u.pm.result.y || | |
| (ecc->u.pm.result.y_len < CCP_ECC_MODULUS_BYTES)) | |
| return -EINVAL; | |
| memset(&op, 0, sizeof(op)); | |
| op.cmd_q = cmd_q; | |
| op.jobid = CCP_NEW_JOBID(cmd_q->ccp); | |
| /* Concatenate the modulus and the operands. Both the modulus and | |
| * the operands must be in little endian format. Since the input | |
| * is in big endian format it must be converted and placed in a | |
| * fixed length buffer. | |
| */ | |
| ret = ccp_init_dm_workarea(&src, cmd_q, CCP_ECC_SRC_BUF_SIZE, | |
| DMA_TO_DEVICE); | |
| if (ret) | |
| return ret; | |
| /* Save the workarea address since it is updated in order to perform | |
| * the concatenation | |
| */ | |
| save = src.address; | |
| /* Copy the ECC modulus */ | |
| ret = ccp_reverse_set_dm_area(&src, ecc->mod, ecc->mod_len, | |
| CCP_ECC_OPERAND_SIZE, false); | |
| if (ret) | |
| goto e_src; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| /* Copy the first point X and Y coordinate */ | |
| ret = ccp_reverse_set_dm_area(&src, ecc->u.pm.point_1.x, | |
| ecc->u.pm.point_1.x_len, | |
| CCP_ECC_OPERAND_SIZE, false); | |
| if (ret) | |
| goto e_src; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| ret = ccp_reverse_set_dm_area(&src, ecc->u.pm.point_1.y, | |
| ecc->u.pm.point_1.y_len, | |
| CCP_ECC_OPERAND_SIZE, false); | |
| if (ret) | |
| goto e_src; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| /* Set the first point Z coordinate to 1 */ | |
| *src.address = 0x01; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| if (ecc->function == CCP_ECC_FUNCTION_PADD_384BIT) { | |
| /* Copy the second point X and Y coordinate */ | |
| ret = ccp_reverse_set_dm_area(&src, ecc->u.pm.point_2.x, | |
| ecc->u.pm.point_2.x_len, | |
| CCP_ECC_OPERAND_SIZE, false); | |
| if (ret) | |
| goto e_src; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| ret = ccp_reverse_set_dm_area(&src, ecc->u.pm.point_2.y, | |
| ecc->u.pm.point_2.y_len, | |
| CCP_ECC_OPERAND_SIZE, false); | |
| if (ret) | |
| goto e_src; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| /* Set the second point Z coordinate to 1 */ | |
| *src.address = 0x01; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| } else { | |
| /* Copy the Domain "a" parameter */ | |
| ret = ccp_reverse_set_dm_area(&src, ecc->u.pm.domain_a, | |
| ecc->u.pm.domain_a_len, | |
| CCP_ECC_OPERAND_SIZE, false); | |
| if (ret) | |
| goto e_src; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| if (ecc->function == CCP_ECC_FUNCTION_PMUL_384BIT) { | |
| /* Copy the scalar value */ | |
| ret = ccp_reverse_set_dm_area(&src, ecc->u.pm.scalar, | |
| ecc->u.pm.scalar_len, | |
| CCP_ECC_OPERAND_SIZE, | |
| false); | |
| if (ret) | |
| goto e_src; | |
| src.address += CCP_ECC_OPERAND_SIZE; | |
| } | |
| } | |
| /* Restore the workarea address */ | |
| src.address = save; | |
| /* Prepare the output area for the operation */ | |
| ret = ccp_init_dm_workarea(&dst, cmd_q, CCP_ECC_DST_BUF_SIZE, | |
| DMA_FROM_DEVICE); | |
| if (ret) | |
| goto e_src; | |
| op.soc = 1; | |
| op.src.u.dma.address = src.dma.address; | |
| op.src.u.dma.offset = 0; | |
| op.src.u.dma.length = src.length; | |
| op.dst.u.dma.address = dst.dma.address; | |
| op.dst.u.dma.offset = 0; | |
| op.dst.u.dma.length = dst.length; | |
| op.u.ecc.function = cmd->u.ecc.function; | |
| ret = cmd_q->ccp->vdata->perform->ecc(&op); | |
| if (ret) { | |
| cmd->engine_error = cmd_q->cmd_error; | |
| goto e_dst; | |
| } | |
| ecc->ecc_result = le16_to_cpup( | |
| (const __le16 *)(dst.address + CCP_ECC_RESULT_OFFSET)); | |
| if (!(ecc->ecc_result & CCP_ECC_RESULT_SUCCESS)) { | |
| ret = -EIO; | |
| goto e_dst; | |
| } | |
| /* Save the workarea address since it is updated as we walk through | |
| * to copy the point math result | |
| */ | |
| save = dst.address; | |
| /* Save the ECC result X and Y coordinates */ | |
| ccp_reverse_get_dm_area(&dst, ecc->u.pm.result.x, | |
| CCP_ECC_MODULUS_BYTES); | |
| dst.address += CCP_ECC_OUTPUT_SIZE; | |
| ccp_reverse_get_dm_area(&dst, ecc->u.pm.result.y, | |
| CCP_ECC_MODULUS_BYTES); | |
| dst.address += CCP_ECC_OUTPUT_SIZE; | |
| /* Restore the workarea address */ | |
| dst.address = save; | |
| e_dst: | |
| ccp_dm_free(&dst); | |
| e_src: | |
| ccp_dm_free(&src); | |
| return ret; | |
| } | |
| static int ccp_run_ecc_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) | |
| { | |
| struct ccp_ecc_engine *ecc = &cmd->u.ecc; | |
| ecc->ecc_result = 0; | |
| if (!ecc->mod || | |
| (ecc->mod_len > CCP_ECC_MODULUS_BYTES)) | |
| return -EINVAL; | |
| switch (ecc->function) { | |
| case CCP_ECC_FUNCTION_MMUL_384BIT: | |
| case CCP_ECC_FUNCTION_MADD_384BIT: | |
| case CCP_ECC_FUNCTION_MINV_384BIT: | |
| return ccp_run_ecc_mm_cmd(cmd_q, cmd); | |
| case CCP_ECC_FUNCTION_PADD_384BIT: | |
| case CCP_ECC_FUNCTION_PMUL_384BIT: | |
| case CCP_ECC_FUNCTION_PDBL_384BIT: | |
| return ccp_run_ecc_pm_cmd(cmd_q, cmd); | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| int ccp_run_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) | |
| { | |
| int ret; | |
| cmd->engine_error = 0; | |
| cmd_q->cmd_error = 0; | |
| cmd_q->int_rcvd = 0; | |
| cmd_q->free_slots = cmd_q->ccp->vdata->perform->get_free_slots(cmd_q); | |
| switch (cmd->engine) { | |
| case CCP_ENGINE_AES: | |
| ret = ccp_run_aes_cmd(cmd_q, cmd); | |
| break; | |
| case CCP_ENGINE_XTS_AES_128: | |
| ret = ccp_run_xts_aes_cmd(cmd_q, cmd); | |
| break; | |
| case CCP_ENGINE_SHA: | |
| ret = ccp_run_sha_cmd(cmd_q, cmd); | |
| break; | |
| case CCP_ENGINE_RSA: | |
| ret = ccp_run_rsa_cmd(cmd_q, cmd); | |
| break; | |
| case CCP_ENGINE_PASSTHRU: | |
| if (cmd->flags & CCP_CMD_PASSTHRU_NO_DMA_MAP) | |
| ret = ccp_run_passthru_nomap_cmd(cmd_q, cmd); | |
| else | |
| ret = ccp_run_passthru_cmd(cmd_q, cmd); | |
| break; | |
| case CCP_ENGINE_ECC: | |
| ret = ccp_run_ecc_cmd(cmd_q, cmd); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| return ret; | |
| } |