| /* | |
| This file is provided under a dual BSD/GPLv2 license. When using or | |
| redistributing this file, you may do so under either license. | |
| GPL LICENSE SUMMARY | |
| Copyright(c) 2014 Intel Corporation. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of version 2 of the GNU General Public License as | |
| published by the Free Software Foundation. | |
| This program is distributed in the hope that it will be useful, but | |
| WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| General Public License for more details. | |
| Contact Information: | |
| qat-linux@intel.com | |
| BSD LICENSE | |
| Copyright(c) 2014 Intel Corporation. | |
| Redistribution and use in source and binary forms, with or without | |
| modification, are permitted provided that the following conditions | |
| are met: | |
| * Redistributions of source code must retain the above copyright | |
| notice, this list of conditions and the following disclaimer. | |
| * Redistributions in binary form must reproduce the above copyright | |
| notice, this list of conditions and the following disclaimer in | |
| the documentation and/or other materials provided with the | |
| distribution. | |
| * Neither the name of Intel Corporation nor the names of its | |
| contributors may be used to endorse or promote products derived | |
| from this software without specific prior written permission. | |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/init.h> | |
| #include <linux/types.h> | |
| #include <linux/fs.h> | |
| #include <linux/slab.h> | |
| #include <linux/errno.h> | |
| #include <linux/device.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/io.h> | |
| #include <adf_accel_devices.h> | |
| #include <adf_common_drv.h> | |
| #include <adf_cfg.h> | |
| #include "adf_c3xxx_hw_data.h" | |
| #define ADF_SYSTEM_DEVICE(device_id) \ | |
| {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)} | |
| static const struct pci_device_id adf_pci_tbl[] = { | |
| ADF_SYSTEM_DEVICE(ADF_C3XXX_PCI_DEVICE_ID), | |
| {0,} | |
| }; | |
| MODULE_DEVICE_TABLE(pci, adf_pci_tbl); | |
| static int adf_probe(struct pci_dev *dev, const struct pci_device_id *ent); | |
| static void adf_remove(struct pci_dev *dev); | |
| static struct pci_driver adf_driver = { | |
| .id_table = adf_pci_tbl, | |
| .name = ADF_C3XXX_DEVICE_NAME, | |
| .probe = adf_probe, | |
| .remove = adf_remove, | |
| .sriov_configure = adf_sriov_configure, | |
| }; | |
| static void adf_cleanup_pci_dev(struct adf_accel_dev *accel_dev) | |
| { | |
| pci_release_regions(accel_dev->accel_pci_dev.pci_dev); | |
| pci_disable_device(accel_dev->accel_pci_dev.pci_dev); | |
| } | |
| static void adf_cleanup_accel(struct adf_accel_dev *accel_dev) | |
| { | |
| struct adf_accel_pci *accel_pci_dev = &accel_dev->accel_pci_dev; | |
| int i; | |
| for (i = 0; i < ADF_PCI_MAX_BARS; i++) { | |
| struct adf_bar *bar = &accel_pci_dev->pci_bars[i]; | |
| if (bar->virt_addr) | |
| pci_iounmap(accel_pci_dev->pci_dev, bar->virt_addr); | |
| } | |
| if (accel_dev->hw_device) { | |
| switch (accel_pci_dev->pci_dev->device) { | |
| case ADF_C3XXX_PCI_DEVICE_ID: | |
| adf_clean_hw_data_c3xxx(accel_dev->hw_device); | |
| break; | |
| default: | |
| break; | |
| } | |
| kfree(accel_dev->hw_device); | |
| accel_dev->hw_device = NULL; | |
| } | |
| adf_cfg_dev_remove(accel_dev); | |
| debugfs_remove(accel_dev->debugfs_dir); | |
| adf_devmgr_rm_dev(accel_dev, NULL); | |
| } | |
| static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | |
| { | |
| struct adf_accel_dev *accel_dev; | |
| struct adf_accel_pci *accel_pci_dev; | |
| struct adf_hw_device_data *hw_data; | |
| char name[ADF_DEVICE_NAME_LENGTH]; | |
| unsigned int i, bar_nr; | |
| int ret, bar_mask; | |
| switch (ent->device) { | |
| case ADF_C3XXX_PCI_DEVICE_ID: | |
| break; | |
| default: | |
| dev_err(&pdev->dev, "Invalid device 0x%x.\n", ent->device); | |
| return -ENODEV; | |
| } | |
| if (num_possible_nodes() > 1 && dev_to_node(&pdev->dev) < 0) { | |
| /* If the accelerator is connected to a node with no memory | |
| * there is no point in using the accelerator since the remote | |
| * memory transaction will be very slow. */ | |
| dev_err(&pdev->dev, "Invalid NUMA configuration.\n"); | |
| return -EINVAL; | |
| } | |
| accel_dev = kzalloc_node(sizeof(*accel_dev), GFP_KERNEL, | |
| dev_to_node(&pdev->dev)); | |
| if (!accel_dev) | |
| return -ENOMEM; | |
| INIT_LIST_HEAD(&accel_dev->crypto_list); | |
| accel_pci_dev = &accel_dev->accel_pci_dev; | |
| accel_pci_dev->pci_dev = pdev; | |
| /* Add accel device to accel table. | |
| * This should be called before adf_cleanup_accel is called */ | |
| if (adf_devmgr_add_dev(accel_dev, NULL)) { | |
| dev_err(&pdev->dev, "Failed to add new accelerator device.\n"); | |
| kfree(accel_dev); | |
| return -EFAULT; | |
| } | |
| accel_dev->owner = THIS_MODULE; | |
| /* Allocate and configure device configuration structure */ | |
| hw_data = kzalloc_node(sizeof(*hw_data), GFP_KERNEL, | |
| dev_to_node(&pdev->dev)); | |
| if (!hw_data) { | |
| ret = -ENOMEM; | |
| goto out_err; | |
| } | |
| accel_dev->hw_device = hw_data; | |
| adf_init_hw_data_c3xxx(accel_dev->hw_device); | |
| pci_read_config_byte(pdev, PCI_REVISION_ID, &accel_pci_dev->revid); | |
| pci_read_config_dword(pdev, ADF_DEVICE_FUSECTL_OFFSET, | |
| &hw_data->fuses); | |
| /* Get Accelerators and Accelerators Engines masks */ | |
| hw_data->accel_mask = hw_data->get_accel_mask(hw_data->fuses); | |
| hw_data->ae_mask = hw_data->get_ae_mask(hw_data->fuses); | |
| accel_pci_dev->sku = hw_data->get_sku(hw_data); | |
| /* If the device has no acceleration engines then ignore it. */ | |
| if (!hw_data->accel_mask || !hw_data->ae_mask || | |
| ((~hw_data->ae_mask) & 0x01)) { | |
| dev_err(&pdev->dev, "No acceleration units found"); | |
| ret = -EFAULT; | |
| goto out_err; | |
| } | |
| /* Create dev top level debugfs entry */ | |
| snprintf(name, sizeof(name), "%s%s_%02x:%02d.%02d", | |
| ADF_DEVICE_NAME_PREFIX, hw_data->dev_class->name, | |
| pdev->bus->number, PCI_SLOT(pdev->devfn), | |
| PCI_FUNC(pdev->devfn)); | |
| accel_dev->debugfs_dir = debugfs_create_dir(name, NULL); | |
| if (!accel_dev->debugfs_dir) { | |
| dev_err(&pdev->dev, "Could not create debugfs dir %s\n", name); | |
| ret = -EINVAL; | |
| goto out_err; | |
| } | |
| /* Create device configuration table */ | |
| ret = adf_cfg_dev_add(accel_dev); | |
| if (ret) | |
| goto out_err; | |
| /* enable PCI device */ | |
| if (pci_enable_device(pdev)) { | |
| ret = -EFAULT; | |
| goto out_err; | |
| } | |
| /* set dma identifier */ | |
| if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { | |
| if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) { | |
| dev_err(&pdev->dev, "No usable DMA configuration\n"); | |
| ret = -EFAULT; | |
| goto out_err_disable; | |
| } else { | |
| pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); | |
| } | |
| } else { | |
| pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); | |
| } | |
| if (pci_request_regions(pdev, ADF_C3XXX_DEVICE_NAME)) { | |
| ret = -EFAULT; | |
| goto out_err_disable; | |
| } | |
| /* Read accelerator capabilities mask */ | |
| pci_read_config_dword(pdev, ADF_DEVICE_LEGFUSE_OFFSET, | |
| &hw_data->accel_capabilities_mask); | |
| /* Find and map all the device's BARS */ | |
| i = 0; | |
| bar_mask = pci_select_bars(pdev, IORESOURCE_MEM); | |
| for_each_set_bit(bar_nr, (const unsigned long *)&bar_mask, | |
| ADF_PCI_MAX_BARS * 2) { | |
| struct adf_bar *bar = &accel_pci_dev->pci_bars[i++]; | |
| bar->base_addr = pci_resource_start(pdev, bar_nr); | |
| if (!bar->base_addr) | |
| break; | |
| bar->size = pci_resource_len(pdev, bar_nr); | |
| bar->virt_addr = pci_iomap(accel_pci_dev->pci_dev, bar_nr, 0); | |
| if (!bar->virt_addr) { | |
| dev_err(&pdev->dev, "Failed to map BAR %d\n", bar_nr); | |
| ret = -EFAULT; | |
| goto out_err_free_reg; | |
| } | |
| } | |
| pci_set_master(pdev); | |
| if (adf_enable_aer(accel_dev, &adf_driver)) { | |
| dev_err(&pdev->dev, "Failed to enable aer\n"); | |
| ret = -EFAULT; | |
| goto out_err_free_reg; | |
| } | |
| if (pci_save_state(pdev)) { | |
| dev_err(&pdev->dev, "Failed to save pci state\n"); | |
| ret = -ENOMEM; | |
| goto out_err_free_reg; | |
| } | |
| ret = qat_crypto_dev_config(accel_dev); | |
| if (ret) | |
| goto out_err_free_reg; | |
| ret = adf_dev_init(accel_dev); | |
| if (ret) | |
| goto out_err_dev_shutdown; | |
| ret = adf_dev_start(accel_dev); | |
| if (ret) | |
| goto out_err_dev_stop; | |
| return ret; | |
| out_err_dev_stop: | |
| adf_dev_stop(accel_dev); | |
| out_err_dev_shutdown: | |
| adf_dev_shutdown(accel_dev); | |
| out_err_free_reg: | |
| pci_release_regions(accel_pci_dev->pci_dev); | |
| out_err_disable: | |
| pci_disable_device(accel_pci_dev->pci_dev); | |
| out_err: | |
| adf_cleanup_accel(accel_dev); | |
| kfree(accel_dev); | |
| return ret; | |
| } | |
| static void adf_remove(struct pci_dev *pdev) | |
| { | |
| struct adf_accel_dev *accel_dev = adf_devmgr_pci_to_accel_dev(pdev); | |
| if (!accel_dev) { | |
| pr_err("QAT: Driver removal failed\n"); | |
| return; | |
| } | |
| adf_dev_stop(accel_dev); | |
| adf_dev_shutdown(accel_dev); | |
| adf_disable_aer(accel_dev); | |
| adf_cleanup_accel(accel_dev); | |
| adf_cleanup_pci_dev(accel_dev); | |
| kfree(accel_dev); | |
| } | |
| static int __init adfdrv_init(void) | |
| { | |
| request_module("intel_qat"); | |
| if (pci_register_driver(&adf_driver)) { | |
| pr_err("QAT: Driver initialization failed\n"); | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| static void __exit adfdrv_release(void) | |
| { | |
| pci_unregister_driver(&adf_driver); | |
| } | |
| module_init(adfdrv_init); | |
| module_exit(adfdrv_release); | |
| MODULE_LICENSE("Dual BSD/GPL"); | |
| MODULE_AUTHOR("Intel"); | |
| MODULE_DESCRIPTION("Intel(R) QuickAssist Technology"); | |
| MODULE_VERSION(ADF_DRV_VERSION); |