| /* Intel Sandy Bridge -EN/-EP/-EX Memory Controller kernel module | |
| * | |
| * This driver supports the memory controllers found on the Intel | |
| * processor family Sandy Bridge. | |
| * | |
| * This file may be distributed under the terms of the | |
| * GNU General Public License version 2 only. | |
| * | |
| * Copyright (c) 2011 by: | |
| * Mauro Carvalho Chehab | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/pci.h> | |
| #include <linux/pci_ids.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/edac.h> | |
| #include <linux/mmzone.h> | |
| #include <linux/smp.h> | |
| #include <linux/bitmap.h> | |
| #include <linux/math64.h> | |
| #include <linux/mod_devicetable.h> | |
| #include <asm/cpu_device_id.h> | |
| #include <asm/processor.h> | |
| #include <asm/mce.h> | |
| #include "edac_core.h" | |
| /* Static vars */ | |
| static LIST_HEAD(sbridge_edac_list); | |
| /* | |
| * Alter this version for the module when modifications are made | |
| */ | |
| #define SBRIDGE_REVISION " Ver: 1.1.1 " | |
| #define EDAC_MOD_STR "sbridge_edac" | |
| /* | |
| * Debug macros | |
| */ | |
| #define sbridge_printk(level, fmt, arg...) \ | |
| edac_printk(level, "sbridge", fmt, ##arg) | |
| #define sbridge_mc_printk(mci, level, fmt, arg...) \ | |
| edac_mc_chipset_printk(mci, level, "sbridge", fmt, ##arg) | |
| /* | |
| * Get a bit field at register value <v>, from bit <lo> to bit <hi> | |
| */ | |
| #define GET_BITFIELD(v, lo, hi) \ | |
| (((v) & GENMASK_ULL(hi, lo)) >> (lo)) | |
| /* Devices 12 Function 6, Offsets 0x80 to 0xcc */ | |
| static const u32 sbridge_dram_rule[] = { | |
| 0x80, 0x88, 0x90, 0x98, 0xa0, | |
| 0xa8, 0xb0, 0xb8, 0xc0, 0xc8, | |
| }; | |
| static const u32 ibridge_dram_rule[] = { | |
| 0x60, 0x68, 0x70, 0x78, 0x80, | |
| 0x88, 0x90, 0x98, 0xa0, 0xa8, | |
| 0xb0, 0xb8, 0xc0, 0xc8, 0xd0, | |
| 0xd8, 0xe0, 0xe8, 0xf0, 0xf8, | |
| }; | |
| static const u32 knl_dram_rule[] = { | |
| 0x60, 0x68, 0x70, 0x78, 0x80, /* 0-4 */ | |
| 0x88, 0x90, 0x98, 0xa0, 0xa8, /* 5-9 */ | |
| 0xb0, 0xb8, 0xc0, 0xc8, 0xd0, /* 10-14 */ | |
| 0xd8, 0xe0, 0xe8, 0xf0, 0xf8, /* 15-19 */ | |
| 0x100, 0x108, 0x110, 0x118, /* 20-23 */ | |
| }; | |
| #define DRAM_RULE_ENABLE(reg) GET_BITFIELD(reg, 0, 0) | |
| #define A7MODE(reg) GET_BITFIELD(reg, 26, 26) | |
| static char *show_dram_attr(u32 attr) | |
| { | |
| switch (attr) { | |
| case 0: | |
| return "DRAM"; | |
| case 1: | |
| return "MMCFG"; | |
| case 2: | |
| return "NXM"; | |
| default: | |
| return "unknown"; | |
| } | |
| } | |
| static const u32 sbridge_interleave_list[] = { | |
| 0x84, 0x8c, 0x94, 0x9c, 0xa4, | |
| 0xac, 0xb4, 0xbc, 0xc4, 0xcc, | |
| }; | |
| static const u32 ibridge_interleave_list[] = { | |
| 0x64, 0x6c, 0x74, 0x7c, 0x84, | |
| 0x8c, 0x94, 0x9c, 0xa4, 0xac, | |
| 0xb4, 0xbc, 0xc4, 0xcc, 0xd4, | |
| 0xdc, 0xe4, 0xec, 0xf4, 0xfc, | |
| }; | |
| static const u32 knl_interleave_list[] = { | |
| 0x64, 0x6c, 0x74, 0x7c, 0x84, /* 0-4 */ | |
| 0x8c, 0x94, 0x9c, 0xa4, 0xac, /* 5-9 */ | |
| 0xb4, 0xbc, 0xc4, 0xcc, 0xd4, /* 10-14 */ | |
| 0xdc, 0xe4, 0xec, 0xf4, 0xfc, /* 15-19 */ | |
| 0x104, 0x10c, 0x114, 0x11c, /* 20-23 */ | |
| }; | |
| struct interleave_pkg { | |
| unsigned char start; | |
| unsigned char end; | |
| }; | |
| static const struct interleave_pkg sbridge_interleave_pkg[] = { | |
| { 0, 2 }, | |
| { 3, 5 }, | |
| { 8, 10 }, | |
| { 11, 13 }, | |
| { 16, 18 }, | |
| { 19, 21 }, | |
| { 24, 26 }, | |
| { 27, 29 }, | |
| }; | |
| static const struct interleave_pkg ibridge_interleave_pkg[] = { | |
| { 0, 3 }, | |
| { 4, 7 }, | |
| { 8, 11 }, | |
| { 12, 15 }, | |
| { 16, 19 }, | |
| { 20, 23 }, | |
| { 24, 27 }, | |
| { 28, 31 }, | |
| }; | |
| static inline int sad_pkg(const struct interleave_pkg *table, u32 reg, | |
| int interleave) | |
| { | |
| return GET_BITFIELD(reg, table[interleave].start, | |
| table[interleave].end); | |
| } | |
| /* Devices 12 Function 7 */ | |
| #define TOLM 0x80 | |
| #define TOHM 0x84 | |
| #define HASWELL_TOLM 0xd0 | |
| #define HASWELL_TOHM_0 0xd4 | |
| #define HASWELL_TOHM_1 0xd8 | |
| #define KNL_TOLM 0xd0 | |
| #define KNL_TOHM_0 0xd4 | |
| #define KNL_TOHM_1 0xd8 | |
| #define GET_TOLM(reg) ((GET_BITFIELD(reg, 0, 3) << 28) | 0x3ffffff) | |
| #define GET_TOHM(reg) ((GET_BITFIELD(reg, 0, 20) << 25) | 0x3ffffff) | |
| /* Device 13 Function 6 */ | |
| #define SAD_TARGET 0xf0 | |
| #define SOURCE_ID(reg) GET_BITFIELD(reg, 9, 11) | |
| #define SOURCE_ID_KNL(reg) GET_BITFIELD(reg, 12, 14) | |
| #define SAD_CONTROL 0xf4 | |
| /* Device 14 function 0 */ | |
| static const u32 tad_dram_rule[] = { | |
| 0x40, 0x44, 0x48, 0x4c, | |
| 0x50, 0x54, 0x58, 0x5c, | |
| 0x60, 0x64, 0x68, 0x6c, | |
| }; | |
| #define MAX_TAD ARRAY_SIZE(tad_dram_rule) | |
| #define TAD_LIMIT(reg) ((GET_BITFIELD(reg, 12, 31) << 26) | 0x3ffffff) | |
| #define TAD_SOCK(reg) GET_BITFIELD(reg, 10, 11) | |
| #define TAD_CH(reg) GET_BITFIELD(reg, 8, 9) | |
| #define TAD_TGT3(reg) GET_BITFIELD(reg, 6, 7) | |
| #define TAD_TGT2(reg) GET_BITFIELD(reg, 4, 5) | |
| #define TAD_TGT1(reg) GET_BITFIELD(reg, 2, 3) | |
| #define TAD_TGT0(reg) GET_BITFIELD(reg, 0, 1) | |
| /* Device 15, function 0 */ | |
| #define MCMTR 0x7c | |
| #define KNL_MCMTR 0x624 | |
| #define IS_ECC_ENABLED(mcmtr) GET_BITFIELD(mcmtr, 2, 2) | |
| #define IS_LOCKSTEP_ENABLED(mcmtr) GET_BITFIELD(mcmtr, 1, 1) | |
| #define IS_CLOSE_PG(mcmtr) GET_BITFIELD(mcmtr, 0, 0) | |
| /* Device 15, function 1 */ | |
| #define RASENABLES 0xac | |
| #define IS_MIRROR_ENABLED(reg) GET_BITFIELD(reg, 0, 0) | |
| /* Device 15, functions 2-5 */ | |
| static const int mtr_regs[] = { | |
| 0x80, 0x84, 0x88, | |
| }; | |
| static const int knl_mtr_reg = 0xb60; | |
| #define RANK_DISABLE(mtr) GET_BITFIELD(mtr, 16, 19) | |
| #define IS_DIMM_PRESENT(mtr) GET_BITFIELD(mtr, 14, 14) | |
| #define RANK_CNT_BITS(mtr) GET_BITFIELD(mtr, 12, 13) | |
| #define RANK_WIDTH_BITS(mtr) GET_BITFIELD(mtr, 2, 4) | |
| #define COL_WIDTH_BITS(mtr) GET_BITFIELD(mtr, 0, 1) | |
| static const u32 tad_ch_nilv_offset[] = { | |
| 0x90, 0x94, 0x98, 0x9c, | |
| 0xa0, 0xa4, 0xa8, 0xac, | |
| 0xb0, 0xb4, 0xb8, 0xbc, | |
| }; | |
| #define CHN_IDX_OFFSET(reg) GET_BITFIELD(reg, 28, 29) | |
| #define TAD_OFFSET(reg) (GET_BITFIELD(reg, 6, 25) << 26) | |
| static const u32 rir_way_limit[] = { | |
| 0x108, 0x10c, 0x110, 0x114, 0x118, | |
| }; | |
| #define MAX_RIR_RANGES ARRAY_SIZE(rir_way_limit) | |
| #define IS_RIR_VALID(reg) GET_BITFIELD(reg, 31, 31) | |
| #define RIR_WAY(reg) GET_BITFIELD(reg, 28, 29) | |
| #define MAX_RIR_WAY 8 | |
| static const u32 rir_offset[MAX_RIR_RANGES][MAX_RIR_WAY] = { | |
| { 0x120, 0x124, 0x128, 0x12c, 0x130, 0x134, 0x138, 0x13c }, | |
| { 0x140, 0x144, 0x148, 0x14c, 0x150, 0x154, 0x158, 0x15c }, | |
| { 0x160, 0x164, 0x168, 0x16c, 0x170, 0x174, 0x178, 0x17c }, | |
| { 0x180, 0x184, 0x188, 0x18c, 0x190, 0x194, 0x198, 0x19c }, | |
| { 0x1a0, 0x1a4, 0x1a8, 0x1ac, 0x1b0, 0x1b4, 0x1b8, 0x1bc }, | |
| }; | |
| #define RIR_RNK_TGT(type, reg) (((type) == BROADWELL) ? \ | |
| GET_BITFIELD(reg, 20, 23) : GET_BITFIELD(reg, 16, 19)) | |
| #define RIR_OFFSET(type, reg) (((type) == HASWELL || (type) == BROADWELL) ? \ | |
| GET_BITFIELD(reg, 2, 15) : GET_BITFIELD(reg, 2, 14)) | |
| /* Device 16, functions 2-7 */ | |
| /* | |
| * FIXME: Implement the error count reads directly | |
| */ | |
| static const u32 correrrcnt[] = { | |
| 0x104, 0x108, 0x10c, 0x110, | |
| }; | |
| #define RANK_ODD_OV(reg) GET_BITFIELD(reg, 31, 31) | |
| #define RANK_ODD_ERR_CNT(reg) GET_BITFIELD(reg, 16, 30) | |
| #define RANK_EVEN_OV(reg) GET_BITFIELD(reg, 15, 15) | |
| #define RANK_EVEN_ERR_CNT(reg) GET_BITFIELD(reg, 0, 14) | |
| static const u32 correrrthrsld[] = { | |
| 0x11c, 0x120, 0x124, 0x128, | |
| }; | |
| #define RANK_ODD_ERR_THRSLD(reg) GET_BITFIELD(reg, 16, 30) | |
| #define RANK_EVEN_ERR_THRSLD(reg) GET_BITFIELD(reg, 0, 14) | |
| /* Device 17, function 0 */ | |
| #define SB_RANK_CFG_A 0x0328 | |
| #define IB_RANK_CFG_A 0x0320 | |
| /* | |
| * sbridge structs | |
| */ | |
| #define NUM_CHANNELS 8 /* 2MC per socket, four chan per MC */ | |
| #define MAX_DIMMS 3 /* Max DIMMS per channel */ | |
| #define KNL_MAX_CHAS 38 /* KNL max num. of Cache Home Agents */ | |
| #define KNL_MAX_CHANNELS 6 /* KNL max num. of PCI channels */ | |
| #define KNL_MAX_EDCS 8 /* Embedded DRAM controllers */ | |
| #define CHANNEL_UNSPECIFIED 0xf /* Intel IA32 SDM 15-14 */ | |
| enum type { | |
| SANDY_BRIDGE, | |
| IVY_BRIDGE, | |
| HASWELL, | |
| BROADWELL, | |
| KNIGHTS_LANDING, | |
| }; | |
| struct sbridge_pvt; | |
| struct sbridge_info { | |
| enum type type; | |
| u32 mcmtr; | |
| u32 rankcfgr; | |
| u64 (*get_tolm)(struct sbridge_pvt *pvt); | |
| u64 (*get_tohm)(struct sbridge_pvt *pvt); | |
| u64 (*rir_limit)(u32 reg); | |
| u64 (*sad_limit)(u32 reg); | |
| u32 (*interleave_mode)(u32 reg); | |
| char* (*show_interleave_mode)(u32 reg); | |
| u32 (*dram_attr)(u32 reg); | |
| const u32 *dram_rule; | |
| const u32 *interleave_list; | |
| const struct interleave_pkg *interleave_pkg; | |
| u8 max_sad; | |
| u8 max_interleave; | |
| u8 (*get_node_id)(struct sbridge_pvt *pvt); | |
| enum mem_type (*get_memory_type)(struct sbridge_pvt *pvt); | |
| enum dev_type (*get_width)(struct sbridge_pvt *pvt, u32 mtr); | |
| struct pci_dev *pci_vtd; | |
| }; | |
| struct sbridge_channel { | |
| u32 ranks; | |
| u32 dimms; | |
| }; | |
| struct pci_id_descr { | |
| int dev_id; | |
| int optional; | |
| }; | |
| struct pci_id_table { | |
| const struct pci_id_descr *descr; | |
| int n_devs; | |
| enum type type; | |
| }; | |
| struct sbridge_dev { | |
| struct list_head list; | |
| u8 bus, mc; | |
| u8 node_id, source_id; | |
| struct pci_dev **pdev; | |
| int n_devs; | |
| struct mem_ctl_info *mci; | |
| }; | |
| struct knl_pvt { | |
| struct pci_dev *pci_cha[KNL_MAX_CHAS]; | |
| struct pci_dev *pci_channel[KNL_MAX_CHANNELS]; | |
| struct pci_dev *pci_mc0; | |
| struct pci_dev *pci_mc1; | |
| struct pci_dev *pci_mc0_misc; | |
| struct pci_dev *pci_mc1_misc; | |
| struct pci_dev *pci_mc_info; /* tolm, tohm */ | |
| }; | |
| struct sbridge_pvt { | |
| struct pci_dev *pci_ta, *pci_ddrio, *pci_ras; | |
| struct pci_dev *pci_sad0, *pci_sad1; | |
| struct pci_dev *pci_ha0, *pci_ha1; | |
| struct pci_dev *pci_br0, *pci_br1; | |
| struct pci_dev *pci_ha1_ta; | |
| struct pci_dev *pci_tad[NUM_CHANNELS]; | |
| struct sbridge_dev *sbridge_dev; | |
| struct sbridge_info info; | |
| struct sbridge_channel channel[NUM_CHANNELS]; | |
| /* Memory type detection */ | |
| bool is_mirrored, is_lockstep, is_close_pg; | |
| bool is_chan_hash; | |
| /* Memory description */ | |
| u64 tolm, tohm; | |
| struct knl_pvt knl; | |
| }; | |
| #define PCI_DESCR(device_id, opt) \ | |
| .dev_id = (device_id), \ | |
| .optional = opt | |
| static const struct pci_id_descr pci_dev_descr_sbridge[] = { | |
| /* Processor Home Agent */ | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0, 0) }, | |
| /* Memory controller */ | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO, 1) }, | |
| /* System Address Decoder */ | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1, 0) }, | |
| /* Broadcast Registers */ | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_BR, 0) }, | |
| }; | |
| #define PCI_ID_TABLE_ENTRY(A, T) { \ | |
| .descr = A, \ | |
| .n_devs = ARRAY_SIZE(A), \ | |
| .type = T \ | |
| } | |
| static const struct pci_id_table pci_dev_descr_sbridge_table[] = { | |
| PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge, SANDY_BRIDGE), | |
| {0,} /* 0 terminated list. */ | |
| }; | |
| /* This changes depending if 1HA or 2HA: | |
| * 1HA: | |
| * 0x0eb8 (17.0) is DDRIO0 | |
| * 2HA: | |
| * 0x0ebc (17.4) is DDRIO0 | |
| */ | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_1HA_DDRIO0 0x0eb8 | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_2HA_DDRIO0 0x0ebc | |
| /* pci ids */ | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0 0x0ea0 | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA 0x0ea8 | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS 0x0e71 | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD0 0x0eaa | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD1 0x0eab | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD2 0x0eac | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD3 0x0ead | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_SAD 0x0ec8 | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_BR0 0x0ec9 | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_BR1 0x0eca | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1 0x0e60 | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TA 0x0e68 | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_RAS 0x0e79 | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0 0x0e6a | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD1 0x0e6b | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD2 0x0e6c | |
| #define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD3 0x0e6d | |
| static const struct pci_id_descr pci_dev_descr_ibridge[] = { | |
| /* Processor Home Agent */ | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0, 0) }, | |
| /* Memory controller */ | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD0, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD1, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD2, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD3, 0) }, | |
| /* System Address Decoder */ | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_SAD, 0) }, | |
| /* Broadcast Registers */ | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_BR0, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_BR1, 0) }, | |
| /* Optional, mode 2HA */ | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1, 1) }, | |
| #if 0 | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TA, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_RAS, 1) }, | |
| #endif | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD1, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD2, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD3, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_1HA_DDRIO0, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_2HA_DDRIO0, 1) }, | |
| }; | |
| static const struct pci_id_table pci_dev_descr_ibridge_table[] = { | |
| PCI_ID_TABLE_ENTRY(pci_dev_descr_ibridge, IVY_BRIDGE), | |
| {0,} /* 0 terminated list. */ | |
| }; | |
| /* Haswell support */ | |
| /* EN processor: | |
| * - 1 IMC | |
| * - 3 DDR3 channels, 2 DPC per channel | |
| * EP processor: | |
| * - 1 or 2 IMC | |
| * - 4 DDR4 channels, 3 DPC per channel | |
| * EP 4S processor: | |
| * - 2 IMC | |
| * - 4 DDR4 channels, 3 DPC per channel | |
| * EX processor: | |
| * - 2 IMC | |
| * - each IMC interfaces with a SMI 2 channel | |
| * - each SMI channel interfaces with a scalable memory buffer | |
| * - each scalable memory buffer supports 4 DDR3/DDR4 channels, 3 DPC | |
| */ | |
| #define HASWELL_DDRCRCLKCONTROLS 0xa10 /* Ditto on Broadwell */ | |
| #define HASWELL_HASYSDEFEATURE2 0x84 | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_VTD_MISC 0x2f28 | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0 0x2fa0 | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1 0x2f60 | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TA 0x2fa8 | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_THERMAL 0x2f71 | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TA 0x2f68 | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_THERMAL 0x2f79 | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD0 0x2ffc | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD1 0x2ffd | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD0 0x2faa | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD1 0x2fab | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD2 0x2fac | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD3 0x2fad | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD0 0x2f6a | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD1 0x2f6b | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD2 0x2f6c | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD3 0x2f6d | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO0 0x2fbd | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO1 0x2fbf | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO2 0x2fb9 | |
| #define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO3 0x2fbb | |
| static const struct pci_id_descr pci_dev_descr_haswell[] = { | |
| /* first item must be the HA */ | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD0, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD1, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TA, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_THERMAL, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD0, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD1, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD2, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD3, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO0, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO1, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO2, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO3, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TA, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_THERMAL, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD0, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD1, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD2, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD3, 1) }, | |
| }; | |
| static const struct pci_id_table pci_dev_descr_haswell_table[] = { | |
| PCI_ID_TABLE_ENTRY(pci_dev_descr_haswell, HASWELL), | |
| {0,} /* 0 terminated list. */ | |
| }; | |
| /* Knight's Landing Support */ | |
| /* | |
| * KNL's memory channels are swizzled between memory controllers. | |
| * MC0 is mapped to CH3,4,5 and MC1 is mapped to CH0,1,2 | |
| */ | |
| #define knl_channel_remap(mc, chan) ((mc) ? (chan) : (chan) + 3) | |
| /* Memory controller, TAD tables, error injection - 2-8-0, 2-9-0 (2 of these) */ | |
| #define PCI_DEVICE_ID_INTEL_KNL_IMC_MC 0x7840 | |
| /* DRAM channel stuff; bank addrs, dimmmtr, etc.. 2-8-2 - 2-9-4 (6 of these) */ | |
| #define PCI_DEVICE_ID_INTEL_KNL_IMC_CHANNEL 0x7843 | |
| /* kdrwdbu TAD limits/offsets, MCMTR - 2-10-1, 2-11-1 (2 of these) */ | |
| #define PCI_DEVICE_ID_INTEL_KNL_IMC_TA 0x7844 | |
| /* CHA broadcast registers, dram rules - 1-29-0 (1 of these) */ | |
| #define PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0 0x782a | |
| /* SAD target - 1-29-1 (1 of these) */ | |
| #define PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1 0x782b | |
| /* Caching / Home Agent */ | |
| #define PCI_DEVICE_ID_INTEL_KNL_IMC_CHA 0x782c | |
| /* Device with TOLM and TOHM, 0-5-0 (1 of these) */ | |
| #define PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM 0x7810 | |
| /* | |
| * KNL differs from SB, IB, and Haswell in that it has multiple | |
| * instances of the same device with the same device ID, so we handle that | |
| * by creating as many copies in the table as we expect to find. | |
| * (Like device ID must be grouped together.) | |
| */ | |
| static const struct pci_id_descr pci_dev_descr_knl[] = { | |
| [0] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0, 0) }, | |
| [1] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1, 0) }, | |
| [2 ... 3] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_MC, 0)}, | |
| [4 ... 41] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_CHA, 0) }, | |
| [42 ... 47] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_CHANNEL, 0) }, | |
| [48] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_TA, 0) }, | |
| [49] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM, 0) }, | |
| }; | |
| static const struct pci_id_table pci_dev_descr_knl_table[] = { | |
| PCI_ID_TABLE_ENTRY(pci_dev_descr_knl, KNIGHTS_LANDING), | |
| {0,} | |
| }; | |
| /* | |
| * Broadwell support | |
| * | |
| * DE processor: | |
| * - 1 IMC | |
| * - 2 DDR3 channels, 2 DPC per channel | |
| * EP processor: | |
| * - 1 or 2 IMC | |
| * - 4 DDR4 channels, 3 DPC per channel | |
| * EP 4S processor: | |
| * - 2 IMC | |
| * - 4 DDR4 channels, 3 DPC per channel | |
| * EX processor: | |
| * - 2 IMC | |
| * - each IMC interfaces with a SMI 2 channel | |
| * - each SMI channel interfaces with a scalable memory buffer | |
| * - each scalable memory buffer supports 4 DDR3/DDR4 channels, 3 DPC | |
| */ | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_VTD_MISC 0x6f28 | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0 0x6fa0 | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1 0x6f60 | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TA 0x6fa8 | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_THERMAL 0x6f71 | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TA 0x6f68 | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_THERMAL 0x6f79 | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD0 0x6ffc | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD1 0x6ffd | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD0 0x6faa | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD1 0x6fab | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD2 0x6fac | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD3 0x6fad | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD0 0x6f6a | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD1 0x6f6b | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD2 0x6f6c | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD3 0x6f6d | |
| #define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_DDRIO0 0x6faf | |
| static const struct pci_id_descr pci_dev_descr_broadwell[] = { | |
| /* first item must be the HA */ | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD0, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD1, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TA, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_THERMAL, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD0, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD1, 0) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD2, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD3, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_DDRIO0, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TA, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_THERMAL, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD0, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD1, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD2, 1) }, | |
| { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD3, 1) }, | |
| }; | |
| static const struct pci_id_table pci_dev_descr_broadwell_table[] = { | |
| PCI_ID_TABLE_ENTRY(pci_dev_descr_broadwell, BROADWELL), | |
| {0,} /* 0 terminated list. */ | |
| }; | |
| /**************************************************************************** | |
| Ancillary status routines | |
| ****************************************************************************/ | |
| static inline int numrank(enum type type, u32 mtr) | |
| { | |
| int ranks = (1 << RANK_CNT_BITS(mtr)); | |
| int max = 4; | |
| if (type == HASWELL || type == BROADWELL || type == KNIGHTS_LANDING) | |
| max = 8; | |
| if (ranks > max) { | |
| edac_dbg(0, "Invalid number of ranks: %d (max = %i) raw value = %x (%04x)\n", | |
| ranks, max, (unsigned int)RANK_CNT_BITS(mtr), mtr); | |
| return -EINVAL; | |
| } | |
| return ranks; | |
| } | |
| static inline int numrow(u32 mtr) | |
| { | |
| int rows = (RANK_WIDTH_BITS(mtr) + 12); | |
| if (rows < 13 || rows > 18) { | |
| edac_dbg(0, "Invalid number of rows: %d (should be between 14 and 17) raw value = %x (%04x)\n", | |
| rows, (unsigned int)RANK_WIDTH_BITS(mtr), mtr); | |
| return -EINVAL; | |
| } | |
| return 1 << rows; | |
| } | |
| static inline int numcol(u32 mtr) | |
| { | |
| int cols = (COL_WIDTH_BITS(mtr) + 10); | |
| if (cols > 12) { | |
| edac_dbg(0, "Invalid number of cols: %d (max = 4) raw value = %x (%04x)\n", | |
| cols, (unsigned int)COL_WIDTH_BITS(mtr), mtr); | |
| return -EINVAL; | |
| } | |
| return 1 << cols; | |
| } | |
| static struct sbridge_dev *get_sbridge_dev(u8 bus, int multi_bus) | |
| { | |
| struct sbridge_dev *sbridge_dev; | |
| /* | |
| * If we have devices scattered across several busses that pertain | |
| * to the same memory controller, we'll lump them all together. | |
| */ | |
| if (multi_bus) { | |
| return list_first_entry_or_null(&sbridge_edac_list, | |
| struct sbridge_dev, list); | |
| } | |
| list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) { | |
| if (sbridge_dev->bus == bus) | |
| return sbridge_dev; | |
| } | |
| return NULL; | |
| } | |
| static struct sbridge_dev *alloc_sbridge_dev(u8 bus, | |
| const struct pci_id_table *table) | |
| { | |
| struct sbridge_dev *sbridge_dev; | |
| sbridge_dev = kzalloc(sizeof(*sbridge_dev), GFP_KERNEL); | |
| if (!sbridge_dev) | |
| return NULL; | |
| sbridge_dev->pdev = kzalloc(sizeof(*sbridge_dev->pdev) * table->n_devs, | |
| GFP_KERNEL); | |
| if (!sbridge_dev->pdev) { | |
| kfree(sbridge_dev); | |
| return NULL; | |
| } | |
| sbridge_dev->bus = bus; | |
| sbridge_dev->n_devs = table->n_devs; | |
| list_add_tail(&sbridge_dev->list, &sbridge_edac_list); | |
| return sbridge_dev; | |
| } | |
| static void free_sbridge_dev(struct sbridge_dev *sbridge_dev) | |
| { | |
| list_del(&sbridge_dev->list); | |
| kfree(sbridge_dev->pdev); | |
| kfree(sbridge_dev); | |
| } | |
| static u64 sbridge_get_tolm(struct sbridge_pvt *pvt) | |
| { | |
| u32 reg; | |
| /* Address range is 32:28 */ | |
| pci_read_config_dword(pvt->pci_sad1, TOLM, ®); | |
| return GET_TOLM(reg); | |
| } | |
| static u64 sbridge_get_tohm(struct sbridge_pvt *pvt) | |
| { | |
| u32 reg; | |
| pci_read_config_dword(pvt->pci_sad1, TOHM, ®); | |
| return GET_TOHM(reg); | |
| } | |
| static u64 ibridge_get_tolm(struct sbridge_pvt *pvt) | |
| { | |
| u32 reg; | |
| pci_read_config_dword(pvt->pci_br1, TOLM, ®); | |
| return GET_TOLM(reg); | |
| } | |
| static u64 ibridge_get_tohm(struct sbridge_pvt *pvt) | |
| { | |
| u32 reg; | |
| pci_read_config_dword(pvt->pci_br1, TOHM, ®); | |
| return GET_TOHM(reg); | |
| } | |
| static u64 rir_limit(u32 reg) | |
| { | |
| return ((u64)GET_BITFIELD(reg, 1, 10) << 29) | 0x1fffffff; | |
| } | |
| static u64 sad_limit(u32 reg) | |
| { | |
| return (GET_BITFIELD(reg, 6, 25) << 26) | 0x3ffffff; | |
| } | |
| static u32 interleave_mode(u32 reg) | |
| { | |
| return GET_BITFIELD(reg, 1, 1); | |
| } | |
| char *show_interleave_mode(u32 reg) | |
| { | |
| return interleave_mode(reg) ? "8:6" : "[8:6]XOR[18:16]"; | |
| } | |
| static u32 dram_attr(u32 reg) | |
| { | |
| return GET_BITFIELD(reg, 2, 3); | |
| } | |
| static u64 knl_sad_limit(u32 reg) | |
| { | |
| return (GET_BITFIELD(reg, 7, 26) << 26) | 0x3ffffff; | |
| } | |
| static u32 knl_interleave_mode(u32 reg) | |
| { | |
| return GET_BITFIELD(reg, 1, 2); | |
| } | |
| static char *knl_show_interleave_mode(u32 reg) | |
| { | |
| char *s; | |
| switch (knl_interleave_mode(reg)) { | |
| case 0: | |
| s = "use address bits [8:6]"; | |
| break; | |
| case 1: | |
| s = "use address bits [10:8]"; | |
| break; | |
| case 2: | |
| s = "use address bits [14:12]"; | |
| break; | |
| case 3: | |
| s = "use address bits [32:30]"; | |
| break; | |
| default: | |
| WARN_ON(1); | |
| break; | |
| } | |
| return s; | |
| } | |
| static u32 dram_attr_knl(u32 reg) | |
| { | |
| return GET_BITFIELD(reg, 3, 4); | |
| } | |
| static enum mem_type get_memory_type(struct sbridge_pvt *pvt) | |
| { | |
| u32 reg; | |
| enum mem_type mtype; | |
| if (pvt->pci_ddrio) { | |
| pci_read_config_dword(pvt->pci_ddrio, pvt->info.rankcfgr, | |
| ®); | |
| if (GET_BITFIELD(reg, 11, 11)) | |
| /* FIXME: Can also be LRDIMM */ | |
| mtype = MEM_RDDR3; | |
| else | |
| mtype = MEM_DDR3; | |
| } else | |
| mtype = MEM_UNKNOWN; | |
| return mtype; | |
| } | |
| static enum mem_type haswell_get_memory_type(struct sbridge_pvt *pvt) | |
| { | |
| u32 reg; | |
| bool registered = false; | |
| enum mem_type mtype = MEM_UNKNOWN; | |
| if (!pvt->pci_ddrio) | |
| goto out; | |
| pci_read_config_dword(pvt->pci_ddrio, | |
| HASWELL_DDRCRCLKCONTROLS, ®); | |
| /* Is_Rdimm */ | |
| if (GET_BITFIELD(reg, 16, 16)) | |
| registered = true; | |
| pci_read_config_dword(pvt->pci_ta, MCMTR, ®); | |
| if (GET_BITFIELD(reg, 14, 14)) { | |
| if (registered) | |
| mtype = MEM_RDDR4; | |
| else | |
| mtype = MEM_DDR4; | |
| } else { | |
| if (registered) | |
| mtype = MEM_RDDR3; | |
| else | |
| mtype = MEM_DDR3; | |
| } | |
| out: | |
| return mtype; | |
| } | |
| static enum dev_type knl_get_width(struct sbridge_pvt *pvt, u32 mtr) | |
| { | |
| /* for KNL value is fixed */ | |
| return DEV_X16; | |
| } | |
| static enum dev_type sbridge_get_width(struct sbridge_pvt *pvt, u32 mtr) | |
| { | |
| /* there's no way to figure out */ | |
| return DEV_UNKNOWN; | |
| } | |
| static enum dev_type __ibridge_get_width(u32 mtr) | |
| { | |
| enum dev_type type; | |
| switch (mtr) { | |
| case 3: | |
| type = DEV_UNKNOWN; | |
| break; | |
| case 2: | |
| type = DEV_X16; | |
| break; | |
| case 1: | |
| type = DEV_X8; | |
| break; | |
| case 0: | |
| type = DEV_X4; | |
| break; | |
| } | |
| return type; | |
| } | |
| static enum dev_type ibridge_get_width(struct sbridge_pvt *pvt, u32 mtr) | |
| { | |
| /* | |
| * ddr3_width on the documentation but also valid for DDR4 on | |
| * Haswell | |
| */ | |
| return __ibridge_get_width(GET_BITFIELD(mtr, 7, 8)); | |
| } | |
| static enum dev_type broadwell_get_width(struct sbridge_pvt *pvt, u32 mtr) | |
| { | |
| /* ddr3_width on the documentation but also valid for DDR4 */ | |
| return __ibridge_get_width(GET_BITFIELD(mtr, 8, 9)); | |
| } | |
| static enum mem_type knl_get_memory_type(struct sbridge_pvt *pvt) | |
| { | |
| /* DDR4 RDIMMS and LRDIMMS are supported */ | |
| return MEM_RDDR4; | |
| } | |
| static u8 get_node_id(struct sbridge_pvt *pvt) | |
| { | |
| u32 reg; | |
| pci_read_config_dword(pvt->pci_br0, SAD_CONTROL, ®); | |
| return GET_BITFIELD(reg, 0, 2); | |
| } | |
| static u8 haswell_get_node_id(struct sbridge_pvt *pvt) | |
| { | |
| u32 reg; | |
| pci_read_config_dword(pvt->pci_sad1, SAD_CONTROL, ®); | |
| return GET_BITFIELD(reg, 0, 3); | |
| } | |
| static u8 knl_get_node_id(struct sbridge_pvt *pvt) | |
| { | |
| u32 reg; | |
| pci_read_config_dword(pvt->pci_sad1, SAD_CONTROL, ®); | |
| return GET_BITFIELD(reg, 0, 2); | |
| } | |
| static u64 haswell_get_tolm(struct sbridge_pvt *pvt) | |
| { | |
| u32 reg; | |
| pci_read_config_dword(pvt->info.pci_vtd, HASWELL_TOLM, ®); | |
| return (GET_BITFIELD(reg, 26, 31) << 26) | 0x3ffffff; | |
| } | |
| static u64 haswell_get_tohm(struct sbridge_pvt *pvt) | |
| { | |
| u64 rc; | |
| u32 reg; | |
| pci_read_config_dword(pvt->info.pci_vtd, HASWELL_TOHM_0, ®); | |
| rc = GET_BITFIELD(reg, 26, 31); | |
| pci_read_config_dword(pvt->info.pci_vtd, HASWELL_TOHM_1, ®); | |
| rc = ((reg << 6) | rc) << 26; | |
| return rc | 0x1ffffff; | |
| } | |
| static u64 knl_get_tolm(struct sbridge_pvt *pvt) | |
| { | |
| u32 reg; | |
| pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOLM, ®); | |
| return (GET_BITFIELD(reg, 26, 31) << 26) | 0x3ffffff; | |
| } | |
| static u64 knl_get_tohm(struct sbridge_pvt *pvt) | |
| { | |
| u64 rc; | |
| u32 reg_lo, reg_hi; | |
| pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOHM_0, ®_lo); | |
| pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOHM_1, ®_hi); | |
| rc = ((u64)reg_hi << 32) | reg_lo; | |
| return rc | 0x3ffffff; | |
| } | |
| static u64 haswell_rir_limit(u32 reg) | |
| { | |
| return (((u64)GET_BITFIELD(reg, 1, 11) + 1) << 29) - 1; | |
| } | |
| static inline u8 sad_pkg_socket(u8 pkg) | |
| { | |
| /* on Ivy Bridge, nodeID is SASS, where A is HA and S is node id */ | |
| return ((pkg >> 3) << 2) | (pkg & 0x3); | |
| } | |
| static inline u8 sad_pkg_ha(u8 pkg) | |
| { | |
| return (pkg >> 2) & 0x1; | |
| } | |
| static int haswell_chan_hash(int idx, u64 addr) | |
| { | |
| int i; | |
| /* | |
| * XOR even bits from 12:26 to bit0 of idx, | |
| * odd bits from 13:27 to bit1 | |
| */ | |
| for (i = 12; i < 28; i += 2) | |
| idx ^= (addr >> i) & 3; | |
| return idx; | |
| } | |
| /**************************************************************************** | |
| Memory check routines | |
| ****************************************************************************/ | |
| static struct pci_dev *get_pdev_same_bus(u8 bus, u32 id) | |
| { | |
| struct pci_dev *pdev = NULL; | |
| do { | |
| pdev = pci_get_device(PCI_VENDOR_ID_INTEL, id, pdev); | |
| if (pdev && pdev->bus->number == bus) | |
| break; | |
| } while (pdev); | |
| return pdev; | |
| } | |
| /** | |
| * check_if_ecc_is_active() - Checks if ECC is active | |
| * @bus: Device bus | |
| * @type: Memory controller type | |
| * returns: 0 in case ECC is active, -ENODEV if it can't be determined or | |
| * disabled | |
| */ | |
| static int check_if_ecc_is_active(const u8 bus, enum type type) | |
| { | |
| struct pci_dev *pdev = NULL; | |
| u32 mcmtr, id; | |
| switch (type) { | |
| case IVY_BRIDGE: | |
| id = PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA; | |
| break; | |
| case HASWELL: | |
| id = PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TA; | |
| break; | |
| case SANDY_BRIDGE: | |
| id = PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA; | |
| break; | |
| case BROADWELL: | |
| id = PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TA; | |
| break; | |
| case KNIGHTS_LANDING: | |
| /* | |
| * KNL doesn't group things by bus the same way | |
| * SB/IB/Haswell does. | |
| */ | |
| id = PCI_DEVICE_ID_INTEL_KNL_IMC_TA; | |
| break; | |
| default: | |
| return -ENODEV; | |
| } | |
| if (type != KNIGHTS_LANDING) | |
| pdev = get_pdev_same_bus(bus, id); | |
| else | |
| pdev = pci_get_device(PCI_VENDOR_ID_INTEL, id, 0); | |
| if (!pdev) { | |
| sbridge_printk(KERN_ERR, "Couldn't find PCI device " | |
| "%04x:%04x! on bus %02d\n", | |
| PCI_VENDOR_ID_INTEL, id, bus); | |
| return -ENODEV; | |
| } | |
| pci_read_config_dword(pdev, | |
| type == KNIGHTS_LANDING ? KNL_MCMTR : MCMTR, &mcmtr); | |
| if (!IS_ECC_ENABLED(mcmtr)) { | |
| sbridge_printk(KERN_ERR, "ECC is disabled. Aborting\n"); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| /* Low bits of TAD limit, and some metadata. */ | |
| static const u32 knl_tad_dram_limit_lo[] = { | |
| 0x400, 0x500, 0x600, 0x700, | |
| 0x800, 0x900, 0xa00, 0xb00, | |
| }; | |
| /* Low bits of TAD offset. */ | |
| static const u32 knl_tad_dram_offset_lo[] = { | |
| 0x404, 0x504, 0x604, 0x704, | |
| 0x804, 0x904, 0xa04, 0xb04, | |
| }; | |
| /* High 16 bits of TAD limit and offset. */ | |
| static const u32 knl_tad_dram_hi[] = { | |
| 0x408, 0x508, 0x608, 0x708, | |
| 0x808, 0x908, 0xa08, 0xb08, | |
| }; | |
| /* Number of ways a tad entry is interleaved. */ | |
| static const u32 knl_tad_ways[] = { | |
| 8, 6, 4, 3, 2, 1, | |
| }; | |
| /* | |
| * Retrieve the n'th Target Address Decode table entry | |
| * from the memory controller's TAD table. | |
| * | |
| * @pvt: driver private data | |
| * @entry: which entry you want to retrieve | |
| * @mc: which memory controller (0 or 1) | |
| * @offset: output tad range offset | |
| * @limit: output address of first byte above tad range | |
| * @ways: output number of interleave ways | |
| * | |
| * The offset value has curious semantics. It's a sort of running total | |
| * of the sizes of all the memory regions that aren't mapped in this | |
| * tad table. | |
| */ | |
| static int knl_get_tad(const struct sbridge_pvt *pvt, | |
| const int entry, | |
| const int mc, | |
| u64 *offset, | |
| u64 *limit, | |
| int *ways) | |
| { | |
| u32 reg_limit_lo, reg_offset_lo, reg_hi; | |
| struct pci_dev *pci_mc; | |
| int way_id; | |
| switch (mc) { | |
| case 0: | |
| pci_mc = pvt->knl.pci_mc0; | |
| break; | |
| case 1: | |
| pci_mc = pvt->knl.pci_mc1; | |
| break; | |
| default: | |
| WARN_ON(1); | |
| return -EINVAL; | |
| } | |
| pci_read_config_dword(pci_mc, | |
| knl_tad_dram_limit_lo[entry], ®_limit_lo); | |
| pci_read_config_dword(pci_mc, | |
| knl_tad_dram_offset_lo[entry], ®_offset_lo); | |
| pci_read_config_dword(pci_mc, | |
| knl_tad_dram_hi[entry], ®_hi); | |
| /* Is this TAD entry enabled? */ | |
| if (!GET_BITFIELD(reg_limit_lo, 0, 0)) | |
| return -ENODEV; | |
| way_id = GET_BITFIELD(reg_limit_lo, 3, 5); | |
| if (way_id < ARRAY_SIZE(knl_tad_ways)) { | |
| *ways = knl_tad_ways[way_id]; | |
| } else { | |
| *ways = 0; | |
| sbridge_printk(KERN_ERR, | |
| "Unexpected value %d in mc_tad_limit_lo wayness field\n", | |
| way_id); | |
| return -ENODEV; | |
| } | |
| /* | |
| * The least significant 6 bits of base and limit are truncated. | |
| * For limit, we fill the missing bits with 1s. | |
| */ | |
| *offset = ((u64) GET_BITFIELD(reg_offset_lo, 6, 31) << 6) | | |
| ((u64) GET_BITFIELD(reg_hi, 0, 15) << 32); | |
| *limit = ((u64) GET_BITFIELD(reg_limit_lo, 6, 31) << 6) | 63 | | |
| ((u64) GET_BITFIELD(reg_hi, 16, 31) << 32); | |
| return 0; | |
| } | |
| /* Determine which memory controller is responsible for a given channel. */ | |
| static int knl_channel_mc(int channel) | |
| { | |
| WARN_ON(channel < 0 || channel >= 6); | |
| return channel < 3 ? 1 : 0; | |
| } | |
| /* | |
| * Get the Nth entry from EDC_ROUTE_TABLE register. | |
| * (This is the per-tile mapping of logical interleave targets to | |
| * physical EDC modules.) | |
| * | |
| * entry 0: 0:2 | |
| * 1: 3:5 | |
| * 2: 6:8 | |
| * 3: 9:11 | |
| * 4: 12:14 | |
| * 5: 15:17 | |
| * 6: 18:20 | |
| * 7: 21:23 | |
| * reserved: 24:31 | |
| */ | |
| static u32 knl_get_edc_route(int entry, u32 reg) | |
| { | |
| WARN_ON(entry >= KNL_MAX_EDCS); | |
| return GET_BITFIELD(reg, entry*3, (entry*3)+2); | |
| } | |
| /* | |
| * Get the Nth entry from MC_ROUTE_TABLE register. | |
| * (This is the per-tile mapping of logical interleave targets to | |
| * physical DRAM channels modules.) | |
| * | |
| * entry 0: mc 0:2 channel 18:19 | |
| * 1: mc 3:5 channel 20:21 | |
| * 2: mc 6:8 channel 22:23 | |
| * 3: mc 9:11 channel 24:25 | |
| * 4: mc 12:14 channel 26:27 | |
| * 5: mc 15:17 channel 28:29 | |
| * reserved: 30:31 | |
| * | |
| * Though we have 3 bits to identify the MC, we should only see | |
| * the values 0 or 1. | |
| */ | |
| static u32 knl_get_mc_route(int entry, u32 reg) | |
| { | |
| int mc, chan; | |
| WARN_ON(entry >= KNL_MAX_CHANNELS); | |
| mc = GET_BITFIELD(reg, entry*3, (entry*3)+2); | |
| chan = GET_BITFIELD(reg, (entry*2) + 18, (entry*2) + 18 + 1); | |
| return knl_channel_remap(mc, chan); | |
| } | |
| /* | |
| * Render the EDC_ROUTE register in human-readable form. | |
| * Output string s should be at least KNL_MAX_EDCS*2 bytes. | |
| */ | |
| static void knl_show_edc_route(u32 reg, char *s) | |
| { | |
| int i; | |
| for (i = 0; i < KNL_MAX_EDCS; i++) { | |
| s[i*2] = knl_get_edc_route(i, reg) + '0'; | |
| s[i*2+1] = '-'; | |
| } | |
| s[KNL_MAX_EDCS*2 - 1] = '\0'; | |
| } | |
| /* | |
| * Render the MC_ROUTE register in human-readable form. | |
| * Output string s should be at least KNL_MAX_CHANNELS*2 bytes. | |
| */ | |
| static void knl_show_mc_route(u32 reg, char *s) | |
| { | |
| int i; | |
| for (i = 0; i < KNL_MAX_CHANNELS; i++) { | |
| s[i*2] = knl_get_mc_route(i, reg) + '0'; | |
| s[i*2+1] = '-'; | |
| } | |
| s[KNL_MAX_CHANNELS*2 - 1] = '\0'; | |
| } | |
| #define KNL_EDC_ROUTE 0xb8 | |
| #define KNL_MC_ROUTE 0xb4 | |
| /* Is this dram rule backed by regular DRAM in flat mode? */ | |
| #define KNL_EDRAM(reg) GET_BITFIELD(reg, 29, 29) | |
| /* Is this dram rule cached? */ | |
| #define KNL_CACHEABLE(reg) GET_BITFIELD(reg, 28, 28) | |
| /* Is this rule backed by edc ? */ | |
| #define KNL_EDRAM_ONLY(reg) GET_BITFIELD(reg, 29, 29) | |
| /* Is this rule backed by DRAM, cacheable in EDRAM? */ | |
| #define KNL_CACHEABLE(reg) GET_BITFIELD(reg, 28, 28) | |
| /* Is this rule mod3? */ | |
| #define KNL_MOD3(reg) GET_BITFIELD(reg, 27, 27) | |
| /* | |
| * Figure out how big our RAM modules are. | |
| * | |
| * The DIMMMTR register in KNL doesn't tell us the size of the DIMMs, so we | |
| * have to figure this out from the SAD rules, interleave lists, route tables, | |
| * and TAD rules. | |
| * | |
| * SAD rules can have holes in them (e.g. the 3G-4G hole), so we have to | |
| * inspect the TAD rules to figure out how large the SAD regions really are. | |
| * | |
| * When we know the real size of a SAD region and how many ways it's | |
| * interleaved, we know the individual contribution of each channel to | |
| * TAD is size/ways. | |
| * | |
| * Finally, we have to check whether each channel participates in each SAD | |
| * region. | |
| * | |
| * Fortunately, KNL only supports one DIMM per channel, so once we know how | |
| * much memory the channel uses, we know the DIMM is at least that large. | |
| * (The BIOS might possibly choose not to map all available memory, in which | |
| * case we will underreport the size of the DIMM.) | |
| * | |
| * In theory, we could try to determine the EDC sizes as well, but that would | |
| * only work in flat mode, not in cache mode. | |
| * | |
| * @mc_sizes: Output sizes of channels (must have space for KNL_MAX_CHANNELS | |
| * elements) | |
| */ | |
| static int knl_get_dimm_capacity(struct sbridge_pvt *pvt, u64 *mc_sizes) | |
| { | |
| u64 sad_base, sad_size, sad_limit = 0; | |
| u64 tad_base, tad_size, tad_limit, tad_deadspace, tad_livespace; | |
| int sad_rule = 0; | |
| int tad_rule = 0; | |
| int intrlv_ways, tad_ways; | |
| u32 first_pkg, pkg; | |
| int i; | |
| u64 sad_actual_size[2]; /* sad size accounting for holes, per mc */ | |
| u32 dram_rule, interleave_reg; | |
| u32 mc_route_reg[KNL_MAX_CHAS]; | |
| u32 edc_route_reg[KNL_MAX_CHAS]; | |
| int edram_only; | |
| char edc_route_string[KNL_MAX_EDCS*2]; | |
| char mc_route_string[KNL_MAX_CHANNELS*2]; | |
| int cur_reg_start; | |
| int mc; | |
| int channel; | |
| int way; | |
| int participants[KNL_MAX_CHANNELS]; | |
| int participant_count = 0; | |
| for (i = 0; i < KNL_MAX_CHANNELS; i++) | |
| mc_sizes[i] = 0; | |
| /* Read the EDC route table in each CHA. */ | |
| cur_reg_start = 0; | |
| for (i = 0; i < KNL_MAX_CHAS; i++) { | |
| pci_read_config_dword(pvt->knl.pci_cha[i], | |
| KNL_EDC_ROUTE, &edc_route_reg[i]); | |
| if (i > 0 && edc_route_reg[i] != edc_route_reg[i-1]) { | |
| knl_show_edc_route(edc_route_reg[i-1], | |
| edc_route_string); | |
| if (cur_reg_start == i-1) | |
| edac_dbg(0, "edc route table for CHA %d: %s\n", | |
| cur_reg_start, edc_route_string); | |
| else | |
| edac_dbg(0, "edc route table for CHA %d-%d: %s\n", | |
| cur_reg_start, i-1, edc_route_string); | |
| cur_reg_start = i; | |
| } | |
| } | |
| knl_show_edc_route(edc_route_reg[i-1], edc_route_string); | |
| if (cur_reg_start == i-1) | |
| edac_dbg(0, "edc route table for CHA %d: %s\n", | |
| cur_reg_start, edc_route_string); | |
| else | |
| edac_dbg(0, "edc route table for CHA %d-%d: %s\n", | |
| cur_reg_start, i-1, edc_route_string); | |
| /* Read the MC route table in each CHA. */ | |
| cur_reg_start = 0; | |
| for (i = 0; i < KNL_MAX_CHAS; i++) { | |
| pci_read_config_dword(pvt->knl.pci_cha[i], | |
| KNL_MC_ROUTE, &mc_route_reg[i]); | |
| if (i > 0 && mc_route_reg[i] != mc_route_reg[i-1]) { | |
| knl_show_mc_route(mc_route_reg[i-1], mc_route_string); | |
| if (cur_reg_start == i-1) | |
| edac_dbg(0, "mc route table for CHA %d: %s\n", | |
| cur_reg_start, mc_route_string); | |
| else | |
| edac_dbg(0, "mc route table for CHA %d-%d: %s\n", | |
| cur_reg_start, i-1, mc_route_string); | |
| cur_reg_start = i; | |
| } | |
| } | |
| knl_show_mc_route(mc_route_reg[i-1], mc_route_string); | |
| if (cur_reg_start == i-1) | |
| edac_dbg(0, "mc route table for CHA %d: %s\n", | |
| cur_reg_start, mc_route_string); | |
| else | |
| edac_dbg(0, "mc route table for CHA %d-%d: %s\n", | |
| cur_reg_start, i-1, mc_route_string); | |
| /* Process DRAM rules */ | |
| for (sad_rule = 0; sad_rule < pvt->info.max_sad; sad_rule++) { | |
| /* previous limit becomes the new base */ | |
| sad_base = sad_limit; | |
| pci_read_config_dword(pvt->pci_sad0, | |
| pvt->info.dram_rule[sad_rule], &dram_rule); | |
| if (!DRAM_RULE_ENABLE(dram_rule)) | |
| break; | |
| edram_only = KNL_EDRAM_ONLY(dram_rule); | |
| sad_limit = pvt->info.sad_limit(dram_rule)+1; | |
| sad_size = sad_limit - sad_base; | |
| pci_read_config_dword(pvt->pci_sad0, | |
| pvt->info.interleave_list[sad_rule], &interleave_reg); | |
| /* | |
| * Find out how many ways this dram rule is interleaved. | |
| * We stop when we see the first channel again. | |
| */ | |
| first_pkg = sad_pkg(pvt->info.interleave_pkg, | |
| interleave_reg, 0); | |
| for (intrlv_ways = 1; intrlv_ways < 8; intrlv_ways++) { | |
| pkg = sad_pkg(pvt->info.interleave_pkg, | |
| interleave_reg, intrlv_ways); | |
| if ((pkg & 0x8) == 0) { | |
| /* | |
| * 0 bit means memory is non-local, | |
| * which KNL doesn't support | |
| */ | |
| edac_dbg(0, "Unexpected interleave target %d\n", | |
| pkg); | |
| return -1; | |
| } | |
| if (pkg == first_pkg) | |
| break; | |
| } | |
| if (KNL_MOD3(dram_rule)) | |
| intrlv_ways *= 3; | |
| edac_dbg(3, "dram rule %d (base 0x%llx, limit 0x%llx), %d way interleave%s\n", | |
| sad_rule, | |
| sad_base, | |
| sad_limit, | |
| intrlv_ways, | |
| edram_only ? ", EDRAM" : ""); | |
| /* | |
| * Find out how big the SAD region really is by iterating | |
| * over TAD tables (SAD regions may contain holes). | |
| * Each memory controller might have a different TAD table, so | |
| * we have to look at both. | |
| * | |
| * Livespace is the memory that's mapped in this TAD table, | |
| * deadspace is the holes (this could be the MMIO hole, or it | |
| * could be memory that's mapped by the other TAD table but | |
| * not this one). | |
| */ | |
| for (mc = 0; mc < 2; mc++) { | |
| sad_actual_size[mc] = 0; | |
| tad_livespace = 0; | |
| for (tad_rule = 0; | |
| tad_rule < ARRAY_SIZE( | |
| knl_tad_dram_limit_lo); | |
| tad_rule++) { | |
| if (knl_get_tad(pvt, | |
| tad_rule, | |
| mc, | |
| &tad_deadspace, | |
| &tad_limit, | |
| &tad_ways)) | |
| break; | |
| tad_size = (tad_limit+1) - | |
| (tad_livespace + tad_deadspace); | |
| tad_livespace += tad_size; | |
| tad_base = (tad_limit+1) - tad_size; | |
| if (tad_base < sad_base) { | |
| if (tad_limit > sad_base) | |
| edac_dbg(0, "TAD region overlaps lower SAD boundary -- TAD tables may be configured incorrectly.\n"); | |
| } else if (tad_base < sad_limit) { | |
| if (tad_limit+1 > sad_limit) { | |
| edac_dbg(0, "TAD region overlaps upper SAD boundary -- TAD tables may be configured incorrectly.\n"); | |
| } else { | |
| /* TAD region is completely inside SAD region */ | |
| edac_dbg(3, "TAD region %d 0x%llx - 0x%llx (%lld bytes) table%d\n", | |
| tad_rule, tad_base, | |
| tad_limit, tad_size, | |
| mc); | |
| sad_actual_size[mc] += tad_size; | |
| } | |
| } | |
| tad_base = tad_limit+1; | |
| } | |
| } | |
| for (mc = 0; mc < 2; mc++) { | |
| edac_dbg(3, " total TAD DRAM footprint in table%d : 0x%llx (%lld bytes)\n", | |
| mc, sad_actual_size[mc], sad_actual_size[mc]); | |
| } | |
| /* Ignore EDRAM rule */ | |
| if (edram_only) | |
| continue; | |
| /* Figure out which channels participate in interleave. */ | |
| for (channel = 0; channel < KNL_MAX_CHANNELS; channel++) | |
| participants[channel] = 0; | |
| /* For each channel, does at least one CHA have | |
| * this channel mapped to the given target? | |
| */ | |
| for (channel = 0; channel < KNL_MAX_CHANNELS; channel++) { | |
| for (way = 0; way < intrlv_ways; way++) { | |
| int target; | |
| int cha; | |
| if (KNL_MOD3(dram_rule)) | |
| target = way; | |
| else | |
| target = 0x7 & sad_pkg( | |
| pvt->info.interleave_pkg, interleave_reg, way); | |
| for (cha = 0; cha < KNL_MAX_CHAS; cha++) { | |
| if (knl_get_mc_route(target, | |
| mc_route_reg[cha]) == channel | |
| && !participants[channel]) { | |
| participant_count++; | |
| participants[channel] = 1; | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| if (participant_count != intrlv_ways) | |
| edac_dbg(0, "participant_count (%d) != interleave_ways (%d): DIMM size may be incorrect\n", | |
| participant_count, intrlv_ways); | |
| for (channel = 0; channel < KNL_MAX_CHANNELS; channel++) { | |
| mc = knl_channel_mc(channel); | |
| if (participants[channel]) { | |
| edac_dbg(4, "mc channel %d contributes %lld bytes via sad entry %d\n", | |
| channel, | |
| sad_actual_size[mc]/intrlv_ways, | |
| sad_rule); | |
| mc_sizes[channel] += | |
| sad_actual_size[mc]/intrlv_ways; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| static int get_dimm_config(struct mem_ctl_info *mci) | |
| { | |
| struct sbridge_pvt *pvt = mci->pvt_info; | |
| struct dimm_info *dimm; | |
| unsigned i, j, banks, ranks, rows, cols, npages; | |
| u64 size; | |
| u32 reg; | |
| enum edac_type mode; | |
| enum mem_type mtype; | |
| int channels = pvt->info.type == KNIGHTS_LANDING ? | |
| KNL_MAX_CHANNELS : NUM_CHANNELS; | |
| u64 knl_mc_sizes[KNL_MAX_CHANNELS]; | |
| if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL) { | |
| pci_read_config_dword(pvt->pci_ha0, HASWELL_HASYSDEFEATURE2, ®); | |
| pvt->is_chan_hash = GET_BITFIELD(reg, 21, 21); | |
| } | |
| if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL || | |
| pvt->info.type == KNIGHTS_LANDING) | |
| pci_read_config_dword(pvt->pci_sad1, SAD_TARGET, ®); | |
| else | |
| pci_read_config_dword(pvt->pci_br0, SAD_TARGET, ®); | |
| if (pvt->info.type == KNIGHTS_LANDING) | |
| pvt->sbridge_dev->source_id = SOURCE_ID_KNL(reg); | |
| else | |
| pvt->sbridge_dev->source_id = SOURCE_ID(reg); | |
| pvt->sbridge_dev->node_id = pvt->info.get_node_id(pvt); | |
| edac_dbg(0, "mc#%d: Node ID: %d, source ID: %d\n", | |
| pvt->sbridge_dev->mc, | |
| pvt->sbridge_dev->node_id, | |
| pvt->sbridge_dev->source_id); | |
| /* KNL doesn't support mirroring or lockstep, | |
| * and is always closed page | |
| */ | |
| if (pvt->info.type == KNIGHTS_LANDING) { | |
| mode = EDAC_S4ECD4ED; | |
| pvt->is_mirrored = false; | |
| if (knl_get_dimm_capacity(pvt, knl_mc_sizes) != 0) | |
| return -1; | |
| } else { | |
| pci_read_config_dword(pvt->pci_ras, RASENABLES, ®); | |
| if (IS_MIRROR_ENABLED(reg)) { | |
| edac_dbg(0, "Memory mirror is enabled\n"); | |
| pvt->is_mirrored = true; | |
| } else { | |
| edac_dbg(0, "Memory mirror is disabled\n"); | |
| pvt->is_mirrored = false; | |
| } | |
| pci_read_config_dword(pvt->pci_ta, MCMTR, &pvt->info.mcmtr); | |
| if (IS_LOCKSTEP_ENABLED(pvt->info.mcmtr)) { | |
| edac_dbg(0, "Lockstep is enabled\n"); | |
| mode = EDAC_S8ECD8ED; | |
| pvt->is_lockstep = true; | |
| } else { | |
| edac_dbg(0, "Lockstep is disabled\n"); | |
| mode = EDAC_S4ECD4ED; | |
| pvt->is_lockstep = false; | |
| } | |
| if (IS_CLOSE_PG(pvt->info.mcmtr)) { | |
| edac_dbg(0, "address map is on closed page mode\n"); | |
| pvt->is_close_pg = true; | |
| } else { | |
| edac_dbg(0, "address map is on open page mode\n"); | |
| pvt->is_close_pg = false; | |
| } | |
| } | |
| mtype = pvt->info.get_memory_type(pvt); | |
| if (mtype == MEM_RDDR3 || mtype == MEM_RDDR4) | |
| edac_dbg(0, "Memory is registered\n"); | |
| else if (mtype == MEM_UNKNOWN) | |
| edac_dbg(0, "Cannot determine memory type\n"); | |
| else | |
| edac_dbg(0, "Memory is unregistered\n"); | |
| if (mtype == MEM_DDR4 || mtype == MEM_RDDR4) | |
| banks = 16; | |
| else | |
| banks = 8; | |
| for (i = 0; i < channels; i++) { | |
| u32 mtr; | |
| int max_dimms_per_channel; | |
| if (pvt->info.type == KNIGHTS_LANDING) { | |
| max_dimms_per_channel = 1; | |
| if (!pvt->knl.pci_channel[i]) | |
| continue; | |
| } else { | |
| max_dimms_per_channel = ARRAY_SIZE(mtr_regs); | |
| if (!pvt->pci_tad[i]) | |
| continue; | |
| } | |
| for (j = 0; j < max_dimms_per_channel; j++) { | |
| dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, | |
| i, j, 0); | |
| if (pvt->info.type == KNIGHTS_LANDING) { | |
| pci_read_config_dword(pvt->knl.pci_channel[i], | |
| knl_mtr_reg, &mtr); | |
| } else { | |
| pci_read_config_dword(pvt->pci_tad[i], | |
| mtr_regs[j], &mtr); | |
| } | |
| edac_dbg(4, "Channel #%d MTR%d = %x\n", i, j, mtr); | |
| if (IS_DIMM_PRESENT(mtr)) { | |
| pvt->channel[i].dimms++; | |
| ranks = numrank(pvt->info.type, mtr); | |
| if (pvt->info.type == KNIGHTS_LANDING) { | |
| /* For DDR4, this is fixed. */ | |
| cols = 1 << 10; | |
| rows = knl_mc_sizes[i] / | |
| ((u64) cols * ranks * banks * 8); | |
| } else { | |
| rows = numrow(mtr); | |
| cols = numcol(mtr); | |
| } | |
| size = ((u64)rows * cols * banks * ranks) >> (20 - 3); | |
| npages = MiB_TO_PAGES(size); | |
| edac_dbg(0, "mc#%d: ha %d channel %d, dimm %d, %lld Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n", | |
| pvt->sbridge_dev->mc, i/4, i%4, j, | |
| size, npages, | |
| banks, ranks, rows, cols); | |
| dimm->nr_pages = npages; | |
| dimm->grain = 32; | |
| dimm->dtype = pvt->info.get_width(pvt, mtr); | |
| dimm->mtype = mtype; | |
| dimm->edac_mode = mode; | |
| snprintf(dimm->label, sizeof(dimm->label), | |
| "CPU_SrcID#%u_Ha#%u_Chan#%u_DIMM#%u", | |
| pvt->sbridge_dev->source_id, i/4, i%4, j); | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| static void get_memory_layout(const struct mem_ctl_info *mci) | |
| { | |
| struct sbridge_pvt *pvt = mci->pvt_info; | |
| int i, j, k, n_sads, n_tads, sad_interl; | |
| u32 reg; | |
| u64 limit, prv = 0; | |
| u64 tmp_mb; | |
| u32 gb, mb; | |
| u32 rir_way; | |
| /* | |
| * Step 1) Get TOLM/TOHM ranges | |
| */ | |
| pvt->tolm = pvt->info.get_tolm(pvt); | |
| tmp_mb = (1 + pvt->tolm) >> 20; | |
| gb = div_u64_rem(tmp_mb, 1024, &mb); | |
| edac_dbg(0, "TOLM: %u.%03u GB (0x%016Lx)\n", | |
| gb, (mb*1000)/1024, (u64)pvt->tolm); | |
| /* Address range is already 45:25 */ | |
| pvt->tohm = pvt->info.get_tohm(pvt); | |
| tmp_mb = (1 + pvt->tohm) >> 20; | |
| gb = div_u64_rem(tmp_mb, 1024, &mb); | |
| edac_dbg(0, "TOHM: %u.%03u GB (0x%016Lx)\n", | |
| gb, (mb*1000)/1024, (u64)pvt->tohm); | |
| /* | |
| * Step 2) Get SAD range and SAD Interleave list | |
| * TAD registers contain the interleave wayness. However, it | |
| * seems simpler to just discover it indirectly, with the | |
| * algorithm bellow. | |
| */ | |
| prv = 0; | |
| for (n_sads = 0; n_sads < pvt->info.max_sad; n_sads++) { | |
| /* SAD_LIMIT Address range is 45:26 */ | |
| pci_read_config_dword(pvt->pci_sad0, pvt->info.dram_rule[n_sads], | |
| ®); | |
| limit = pvt->info.sad_limit(reg); | |
| if (!DRAM_RULE_ENABLE(reg)) | |
| continue; | |
| if (limit <= prv) | |
| break; | |
| tmp_mb = (limit + 1) >> 20; | |
| gb = div_u64_rem(tmp_mb, 1024, &mb); | |
| edac_dbg(0, "SAD#%d %s up to %u.%03u GB (0x%016Lx) Interleave: %s reg=0x%08x\n", | |
| n_sads, | |
| show_dram_attr(pvt->info.dram_attr(reg)), | |
| gb, (mb*1000)/1024, | |
| ((u64)tmp_mb) << 20L, | |
| pvt->info.show_interleave_mode(reg), | |
| reg); | |
| prv = limit; | |
| pci_read_config_dword(pvt->pci_sad0, pvt->info.interleave_list[n_sads], | |
| ®); | |
| sad_interl = sad_pkg(pvt->info.interleave_pkg, reg, 0); | |
| for (j = 0; j < 8; j++) { | |
| u32 pkg = sad_pkg(pvt->info.interleave_pkg, reg, j); | |
| if (j > 0 && sad_interl == pkg) | |
| break; | |
| edac_dbg(0, "SAD#%d, interleave #%d: %d\n", | |
| n_sads, j, pkg); | |
| } | |
| } | |
| if (pvt->info.type == KNIGHTS_LANDING) | |
| return; | |
| /* | |
| * Step 3) Get TAD range | |
| */ | |
| prv = 0; | |
| for (n_tads = 0; n_tads < MAX_TAD; n_tads++) { | |
| pci_read_config_dword(pvt->pci_ha0, tad_dram_rule[n_tads], | |
| ®); | |
| limit = TAD_LIMIT(reg); | |
| if (limit <= prv) | |
| break; | |
| tmp_mb = (limit + 1) >> 20; | |
| gb = div_u64_rem(tmp_mb, 1024, &mb); | |
| edac_dbg(0, "TAD#%d: up to %u.%03u GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n", | |
| n_tads, gb, (mb*1000)/1024, | |
| ((u64)tmp_mb) << 20L, | |
| (u32)(1 << TAD_SOCK(reg)), | |
| (u32)TAD_CH(reg) + 1, | |
| (u32)TAD_TGT0(reg), | |
| (u32)TAD_TGT1(reg), | |
| (u32)TAD_TGT2(reg), | |
| (u32)TAD_TGT3(reg), | |
| reg); | |
| prv = limit; | |
| } | |
| /* | |
| * Step 4) Get TAD offsets, per each channel | |
| */ | |
| for (i = 0; i < NUM_CHANNELS; i++) { | |
| if (!pvt->channel[i].dimms) | |
| continue; | |
| for (j = 0; j < n_tads; j++) { | |
| pci_read_config_dword(pvt->pci_tad[i], | |
| tad_ch_nilv_offset[j], | |
| ®); | |
| tmp_mb = TAD_OFFSET(reg) >> 20; | |
| gb = div_u64_rem(tmp_mb, 1024, &mb); | |
| edac_dbg(0, "TAD CH#%d, offset #%d: %u.%03u GB (0x%016Lx), reg=0x%08x\n", | |
| i, j, | |
| gb, (mb*1000)/1024, | |
| ((u64)tmp_mb) << 20L, | |
| reg); | |
| } | |
| } | |
| /* | |
| * Step 6) Get RIR Wayness/Limit, per each channel | |
| */ | |
| for (i = 0; i < NUM_CHANNELS; i++) { | |
| if (!pvt->channel[i].dimms) | |
| continue; | |
| for (j = 0; j < MAX_RIR_RANGES; j++) { | |
| pci_read_config_dword(pvt->pci_tad[i], | |
| rir_way_limit[j], | |
| ®); | |
| if (!IS_RIR_VALID(reg)) | |
| continue; | |
| tmp_mb = pvt->info.rir_limit(reg) >> 20; | |
| rir_way = 1 << RIR_WAY(reg); | |
| gb = div_u64_rem(tmp_mb, 1024, &mb); | |
| edac_dbg(0, "CH#%d RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d, reg=0x%08x\n", | |
| i, j, | |
| gb, (mb*1000)/1024, | |
| ((u64)tmp_mb) << 20L, | |
| rir_way, | |
| reg); | |
| for (k = 0; k < rir_way; k++) { | |
| pci_read_config_dword(pvt->pci_tad[i], | |
| rir_offset[j][k], | |
| ®); | |
| tmp_mb = RIR_OFFSET(pvt->info.type, reg) << 6; | |
| gb = div_u64_rem(tmp_mb, 1024, &mb); | |
| edac_dbg(0, "CH#%d RIR#%d INTL#%d, offset %u.%03u GB (0x%016Lx), tgt: %d, reg=0x%08x\n", | |
| i, j, k, | |
| gb, (mb*1000)/1024, | |
| ((u64)tmp_mb) << 20L, | |
| (u32)RIR_RNK_TGT(pvt->info.type, reg), | |
| reg); | |
| } | |
| } | |
| } | |
| } | |
| static struct mem_ctl_info *get_mci_for_node_id(u8 node_id) | |
| { | |
| struct sbridge_dev *sbridge_dev; | |
| list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) { | |
| if (sbridge_dev->node_id == node_id) | |
| return sbridge_dev->mci; | |
| } | |
| return NULL; | |
| } | |
| static int get_memory_error_data(struct mem_ctl_info *mci, | |
| u64 addr, | |
| u8 *socket, u8 *ha, | |
| long *channel_mask, | |
| u8 *rank, | |
| char **area_type, char *msg) | |
| { | |
| struct mem_ctl_info *new_mci; | |
| struct sbridge_pvt *pvt = mci->pvt_info; | |
| struct pci_dev *pci_ha; | |
| int n_rir, n_sads, n_tads, sad_way, sck_xch; | |
| int sad_interl, idx, base_ch; | |
| int interleave_mode, shiftup = 0; | |
| unsigned sad_interleave[pvt->info.max_interleave]; | |
| u32 reg, dram_rule; | |
| u8 ch_way, sck_way, pkg, sad_ha = 0, ch_add = 0; | |
| u32 tad_offset; | |
| u32 rir_way; | |
| u32 mb, gb; | |
| u64 ch_addr, offset, limit = 0, prv = 0; | |
| /* | |
| * Step 0) Check if the address is at special memory ranges | |
| * The check bellow is probably enough to fill all cases where | |
| * the error is not inside a memory, except for the legacy | |
| * range (e. g. VGA addresses). It is unlikely, however, that the | |
| * memory controller would generate an error on that range. | |
| */ | |
| if ((addr > (u64) pvt->tolm) && (addr < (1LL << 32))) { | |
| sprintf(msg, "Error at TOLM area, on addr 0x%08Lx", addr); | |
| return -EINVAL; | |
| } | |
| if (addr >= (u64)pvt->tohm) { | |
| sprintf(msg, "Error at MMIOH area, on addr 0x%016Lx", addr); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Step 1) Get socket | |
| */ | |
| for (n_sads = 0; n_sads < pvt->info.max_sad; n_sads++) { | |
| pci_read_config_dword(pvt->pci_sad0, pvt->info.dram_rule[n_sads], | |
| ®); | |
| if (!DRAM_RULE_ENABLE(reg)) | |
| continue; | |
| limit = pvt->info.sad_limit(reg); | |
| if (limit <= prv) { | |
| sprintf(msg, "Can't discover the memory socket"); | |
| return -EINVAL; | |
| } | |
| if (addr <= limit) | |
| break; | |
| prv = limit; | |
| } | |
| if (n_sads == pvt->info.max_sad) { | |
| sprintf(msg, "Can't discover the memory socket"); | |
| return -EINVAL; | |
| } | |
| dram_rule = reg; | |
| *area_type = show_dram_attr(pvt->info.dram_attr(dram_rule)); | |
| interleave_mode = pvt->info.interleave_mode(dram_rule); | |
| pci_read_config_dword(pvt->pci_sad0, pvt->info.interleave_list[n_sads], | |
| ®); | |
| if (pvt->info.type == SANDY_BRIDGE) { | |
| sad_interl = sad_pkg(pvt->info.interleave_pkg, reg, 0); | |
| for (sad_way = 0; sad_way < 8; sad_way++) { | |
| u32 pkg = sad_pkg(pvt->info.interleave_pkg, reg, sad_way); | |
| if (sad_way > 0 && sad_interl == pkg) | |
| break; | |
| sad_interleave[sad_way] = pkg; | |
| edac_dbg(0, "SAD interleave #%d: %d\n", | |
| sad_way, sad_interleave[sad_way]); | |
| } | |
| edac_dbg(0, "mc#%d: Error detected on SAD#%d: address 0x%016Lx < 0x%016Lx, Interleave [%d:6]%s\n", | |
| pvt->sbridge_dev->mc, | |
| n_sads, | |
| addr, | |
| limit, | |
| sad_way + 7, | |
| !interleave_mode ? "" : "XOR[18:16]"); | |
| if (interleave_mode) | |
| idx = ((addr >> 6) ^ (addr >> 16)) & 7; | |
| else | |
| idx = (addr >> 6) & 7; | |
| switch (sad_way) { | |
| case 1: | |
| idx = 0; | |
| break; | |
| case 2: | |
| idx = idx & 1; | |
| break; | |
| case 4: | |
| idx = idx & 3; | |
| break; | |
| case 8: | |
| break; | |
| default: | |
| sprintf(msg, "Can't discover socket interleave"); | |
| return -EINVAL; | |
| } | |
| *socket = sad_interleave[idx]; | |
| edac_dbg(0, "SAD interleave index: %d (wayness %d) = CPU socket %d\n", | |
| idx, sad_way, *socket); | |
| } else if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL) { | |
| int bits, a7mode = A7MODE(dram_rule); | |
| if (a7mode) { | |
| /* A7 mode swaps P9 with P6 */ | |
| bits = GET_BITFIELD(addr, 7, 8) << 1; | |
| bits |= GET_BITFIELD(addr, 9, 9); | |
| } else | |
| bits = GET_BITFIELD(addr, 6, 8); | |
| if (interleave_mode == 0) { | |
| /* interleave mode will XOR {8,7,6} with {18,17,16} */ | |
| idx = GET_BITFIELD(addr, 16, 18); | |
| idx ^= bits; | |
| } else | |
| idx = bits; | |
| pkg = sad_pkg(pvt->info.interleave_pkg, reg, idx); | |
| *socket = sad_pkg_socket(pkg); | |
| sad_ha = sad_pkg_ha(pkg); | |
| if (sad_ha) | |
| ch_add = 4; | |
| if (a7mode) { | |
| /* MCChanShiftUpEnable */ | |
| pci_read_config_dword(pvt->pci_ha0, | |
| HASWELL_HASYSDEFEATURE2, ®); | |
| shiftup = GET_BITFIELD(reg, 22, 22); | |
| } | |
| edac_dbg(0, "SAD interleave package: %d = CPU socket %d, HA %i, shiftup: %i\n", | |
| idx, *socket, sad_ha, shiftup); | |
| } else { | |
| /* Ivy Bridge's SAD mode doesn't support XOR interleave mode */ | |
| idx = (addr >> 6) & 7; | |
| pkg = sad_pkg(pvt->info.interleave_pkg, reg, idx); | |
| *socket = sad_pkg_socket(pkg); | |
| sad_ha = sad_pkg_ha(pkg); | |
| if (sad_ha) | |
| ch_add = 4; | |
| edac_dbg(0, "SAD interleave package: %d = CPU socket %d, HA %d\n", | |
| idx, *socket, sad_ha); | |
| } | |
| *ha = sad_ha; | |
| /* | |
| * Move to the proper node structure, in order to access the | |
| * right PCI registers | |
| */ | |
| new_mci = get_mci_for_node_id(*socket); | |
| if (!new_mci) { | |
| sprintf(msg, "Struct for socket #%u wasn't initialized", | |
| *socket); | |
| return -EINVAL; | |
| } | |
| mci = new_mci; | |
| pvt = mci->pvt_info; | |
| /* | |
| * Step 2) Get memory channel | |
| */ | |
| prv = 0; | |
| if (pvt->info.type == SANDY_BRIDGE) | |
| pci_ha = pvt->pci_ha0; | |
| else { | |
| if (sad_ha) | |
| pci_ha = pvt->pci_ha1; | |
| else | |
| pci_ha = pvt->pci_ha0; | |
| } | |
| for (n_tads = 0; n_tads < MAX_TAD; n_tads++) { | |
| pci_read_config_dword(pci_ha, tad_dram_rule[n_tads], ®); | |
| limit = TAD_LIMIT(reg); | |
| if (limit <= prv) { | |
| sprintf(msg, "Can't discover the memory channel"); | |
| return -EINVAL; | |
| } | |
| if (addr <= limit) | |
| break; | |
| prv = limit; | |
| } | |
| if (n_tads == MAX_TAD) { | |
| sprintf(msg, "Can't discover the memory channel"); | |
| return -EINVAL; | |
| } | |
| ch_way = TAD_CH(reg) + 1; | |
| sck_way = TAD_SOCK(reg); | |
| if (ch_way == 3) | |
| idx = addr >> 6; | |
| else { | |
| idx = (addr >> (6 + sck_way + shiftup)) & 0x3; | |
| if (pvt->is_chan_hash) | |
| idx = haswell_chan_hash(idx, addr); | |
| } | |
| idx = idx % ch_way; | |
| /* | |
| * FIXME: Shouldn't we use CHN_IDX_OFFSET() here, when ch_way == 3 ??? | |
| */ | |
| switch (idx) { | |
| case 0: | |
| base_ch = TAD_TGT0(reg); | |
| break; | |
| case 1: | |
| base_ch = TAD_TGT1(reg); | |
| break; | |
| case 2: | |
| base_ch = TAD_TGT2(reg); | |
| break; | |
| case 3: | |
| base_ch = TAD_TGT3(reg); | |
| break; | |
| default: | |
| sprintf(msg, "Can't discover the TAD target"); | |
| return -EINVAL; | |
| } | |
| *channel_mask = 1 << base_ch; | |
| pci_read_config_dword(pvt->pci_tad[ch_add + base_ch], | |
| tad_ch_nilv_offset[n_tads], | |
| &tad_offset); | |
| if (pvt->is_mirrored) { | |
| *channel_mask |= 1 << ((base_ch + 2) % 4); | |
| switch(ch_way) { | |
| case 2: | |
| case 4: | |
| sck_xch = (1 << sck_way) * (ch_way >> 1); | |
| break; | |
| default: | |
| sprintf(msg, "Invalid mirror set. Can't decode addr"); | |
| return -EINVAL; | |
| } | |
| } else | |
| sck_xch = (1 << sck_way) * ch_way; | |
| if (pvt->is_lockstep) | |
| *channel_mask |= 1 << ((base_ch + 1) % 4); | |
| offset = TAD_OFFSET(tad_offset); | |
| edac_dbg(0, "TAD#%d: address 0x%016Lx < 0x%016Lx, socket interleave %d, channel interleave %d (offset 0x%08Lx), index %d, base ch: %d, ch mask: 0x%02lx\n", | |
| n_tads, | |
| addr, | |
| limit, | |
| sck_way, | |
| ch_way, | |
| offset, | |
| idx, | |
| base_ch, | |
| *channel_mask); | |
| /* Calculate channel address */ | |
| /* Remove the TAD offset */ | |
| if (offset > addr) { | |
| sprintf(msg, "Can't calculate ch addr: TAD offset 0x%08Lx is too high for addr 0x%08Lx!", | |
| offset, addr); | |
| return -EINVAL; | |
| } | |
| ch_addr = addr - offset; | |
| ch_addr >>= (6 + shiftup); | |
| ch_addr /= sck_xch; | |
| ch_addr <<= (6 + shiftup); | |
| ch_addr |= addr & ((1 << (6 + shiftup)) - 1); | |
| /* | |
| * Step 3) Decode rank | |
| */ | |
| for (n_rir = 0; n_rir < MAX_RIR_RANGES; n_rir++) { | |
| pci_read_config_dword(pvt->pci_tad[ch_add + base_ch], | |
| rir_way_limit[n_rir], | |
| ®); | |
| if (!IS_RIR_VALID(reg)) | |
| continue; | |
| limit = pvt->info.rir_limit(reg); | |
| gb = div_u64_rem(limit >> 20, 1024, &mb); | |
| edac_dbg(0, "RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d\n", | |
| n_rir, | |
| gb, (mb*1000)/1024, | |
| limit, | |
| 1 << RIR_WAY(reg)); | |
| if (ch_addr <= limit) | |
| break; | |
| } | |
| if (n_rir == MAX_RIR_RANGES) { | |
| sprintf(msg, "Can't discover the memory rank for ch addr 0x%08Lx", | |
| ch_addr); | |
| return -EINVAL; | |
| } | |
| rir_way = RIR_WAY(reg); | |
| if (pvt->is_close_pg) | |
| idx = (ch_addr >> 6); | |
| else | |
| idx = (ch_addr >> 13); /* FIXME: Datasheet says to shift by 15 */ | |
| idx %= 1 << rir_way; | |
| pci_read_config_dword(pvt->pci_tad[ch_add + base_ch], | |
| rir_offset[n_rir][idx], | |
| ®); | |
| *rank = RIR_RNK_TGT(pvt->info.type, reg); | |
| edac_dbg(0, "RIR#%d: channel address 0x%08Lx < 0x%08Lx, RIR interleave %d, index %d\n", | |
| n_rir, | |
| ch_addr, | |
| limit, | |
| rir_way, | |
| idx); | |
| return 0; | |
| } | |
| /**************************************************************************** | |
| Device initialization routines: put/get, init/exit | |
| ****************************************************************************/ | |
| /* | |
| * sbridge_put_all_devices 'put' all the devices that we have | |
| * reserved via 'get' | |
| */ | |
| static void sbridge_put_devices(struct sbridge_dev *sbridge_dev) | |
| { | |
| int i; | |
| edac_dbg(0, "\n"); | |
| for (i = 0; i < sbridge_dev->n_devs; i++) { | |
| struct pci_dev *pdev = sbridge_dev->pdev[i]; | |
| if (!pdev) | |
| continue; | |
| edac_dbg(0, "Removing dev %02x:%02x.%d\n", | |
| pdev->bus->number, | |
| PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); | |
| pci_dev_put(pdev); | |
| } | |
| } | |
| static void sbridge_put_all_devices(void) | |
| { | |
| struct sbridge_dev *sbridge_dev, *tmp; | |
| list_for_each_entry_safe(sbridge_dev, tmp, &sbridge_edac_list, list) { | |
| sbridge_put_devices(sbridge_dev); | |
| free_sbridge_dev(sbridge_dev); | |
| } | |
| } | |
| static int sbridge_get_onedevice(struct pci_dev **prev, | |
| u8 *num_mc, | |
| const struct pci_id_table *table, | |
| const unsigned devno, | |
| const int multi_bus) | |
| { | |
| struct sbridge_dev *sbridge_dev; | |
| const struct pci_id_descr *dev_descr = &table->descr[devno]; | |
| struct pci_dev *pdev = NULL; | |
| u8 bus = 0; | |
| sbridge_printk(KERN_DEBUG, | |
| "Seeking for: PCI ID %04x:%04x\n", | |
| PCI_VENDOR_ID_INTEL, dev_descr->dev_id); | |
| pdev = pci_get_device(PCI_VENDOR_ID_INTEL, | |
| dev_descr->dev_id, *prev); | |
| if (!pdev) { | |
| if (*prev) { | |
| *prev = pdev; | |
| return 0; | |
| } | |
| if (dev_descr->optional) | |
| return 0; | |
| /* if the HA wasn't found */ | |
| if (devno == 0) | |
| return -ENODEV; | |
| sbridge_printk(KERN_INFO, | |
| "Device not found: %04x:%04x\n", | |
| PCI_VENDOR_ID_INTEL, dev_descr->dev_id); | |
| /* End of list, leave */ | |
| return -ENODEV; | |
| } | |
| bus = pdev->bus->number; | |
| sbridge_dev = get_sbridge_dev(bus, multi_bus); | |
| if (!sbridge_dev) { | |
| sbridge_dev = alloc_sbridge_dev(bus, table); | |
| if (!sbridge_dev) { | |
| pci_dev_put(pdev); | |
| return -ENOMEM; | |
| } | |
| (*num_mc)++; | |
| } | |
| if (sbridge_dev->pdev[devno]) { | |
| sbridge_printk(KERN_ERR, | |
| "Duplicated device for %04x:%04x\n", | |
| PCI_VENDOR_ID_INTEL, dev_descr->dev_id); | |
| pci_dev_put(pdev); | |
| return -ENODEV; | |
| } | |
| sbridge_dev->pdev[devno] = pdev; | |
| /* Be sure that the device is enabled */ | |
| if (unlikely(pci_enable_device(pdev) < 0)) { | |
| sbridge_printk(KERN_ERR, | |
| "Couldn't enable %04x:%04x\n", | |
| PCI_VENDOR_ID_INTEL, dev_descr->dev_id); | |
| return -ENODEV; | |
| } | |
| edac_dbg(0, "Detected %04x:%04x\n", | |
| PCI_VENDOR_ID_INTEL, dev_descr->dev_id); | |
| /* | |
| * As stated on drivers/pci/search.c, the reference count for | |
| * @from is always decremented if it is not %NULL. So, as we need | |
| * to get all devices up to null, we need to do a get for the device | |
| */ | |
| pci_dev_get(pdev); | |
| *prev = pdev; | |
| return 0; | |
| } | |
| /* | |
| * sbridge_get_all_devices - Find and perform 'get' operation on the MCH's | |
| * devices we want to reference for this driver. | |
| * @num_mc: pointer to the memory controllers count, to be incremented in case | |
| * of success. | |
| * @table: model specific table | |
| * | |
| * returns 0 in case of success or error code | |
| */ | |
| static int sbridge_get_all_devices(u8 *num_mc, | |
| const struct pci_id_table *table) | |
| { | |
| int i, rc; | |
| struct pci_dev *pdev = NULL; | |
| int allow_dups = 0; | |
| int multi_bus = 0; | |
| if (table->type == KNIGHTS_LANDING) | |
| allow_dups = multi_bus = 1; | |
| while (table && table->descr) { | |
| for (i = 0; i < table->n_devs; i++) { | |
| if (!allow_dups || i == 0 || | |
| table->descr[i].dev_id != | |
| table->descr[i-1].dev_id) { | |
| pdev = NULL; | |
| } | |
| do { | |
| rc = sbridge_get_onedevice(&pdev, num_mc, | |
| table, i, multi_bus); | |
| if (rc < 0) { | |
| if (i == 0) { | |
| i = table->n_devs; | |
| break; | |
| } | |
| sbridge_put_all_devices(); | |
| return -ENODEV; | |
| } | |
| } while (pdev && !allow_dups); | |
| } | |
| table++; | |
| } | |
| return 0; | |
| } | |
| static int sbridge_mci_bind_devs(struct mem_ctl_info *mci, | |
| struct sbridge_dev *sbridge_dev) | |
| { | |
| struct sbridge_pvt *pvt = mci->pvt_info; | |
| struct pci_dev *pdev; | |
| u8 saw_chan_mask = 0; | |
| int i; | |
| for (i = 0; i < sbridge_dev->n_devs; i++) { | |
| pdev = sbridge_dev->pdev[i]; | |
| if (!pdev) | |
| continue; | |
| switch (pdev->device) { | |
| case PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0: | |
| pvt->pci_sad0 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1: | |
| pvt->pci_sad1 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_SBRIDGE_BR: | |
| pvt->pci_br0 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0: | |
| pvt->pci_ha0 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA: | |
| pvt->pci_ta = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS: | |
| pvt->pci_ras = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0: | |
| case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1: | |
| case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2: | |
| case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3: | |
| { | |
| int id = pdev->device - PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0; | |
| pvt->pci_tad[id] = pdev; | |
| saw_chan_mask |= 1 << id; | |
| } | |
| break; | |
| case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO: | |
| pvt->pci_ddrio = pdev; | |
| break; | |
| default: | |
| goto error; | |
| } | |
| edac_dbg(0, "Associated PCI %02x:%02x, bus %d with dev = %p\n", | |
| pdev->vendor, pdev->device, | |
| sbridge_dev->bus, | |
| pdev); | |
| } | |
| /* Check if everything were registered */ | |
| if (!pvt->pci_sad0 || !pvt->pci_sad1 || !pvt->pci_ha0 || | |
| !pvt->pci_ras || !pvt->pci_ta) | |
| goto enodev; | |
| if (saw_chan_mask != 0x0f) | |
| goto enodev; | |
| return 0; | |
| enodev: | |
| sbridge_printk(KERN_ERR, "Some needed devices are missing\n"); | |
| return -ENODEV; | |
| error: | |
| sbridge_printk(KERN_ERR, "Unexpected device %02x:%02x\n", | |
| PCI_VENDOR_ID_INTEL, pdev->device); | |
| return -EINVAL; | |
| } | |
| static int ibridge_mci_bind_devs(struct mem_ctl_info *mci, | |
| struct sbridge_dev *sbridge_dev) | |
| { | |
| struct sbridge_pvt *pvt = mci->pvt_info; | |
| struct pci_dev *pdev; | |
| u8 saw_chan_mask = 0; | |
| int i; | |
| for (i = 0; i < sbridge_dev->n_devs; i++) { | |
| pdev = sbridge_dev->pdev[i]; | |
| if (!pdev) | |
| continue; | |
| switch (pdev->device) { | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0: | |
| pvt->pci_ha0 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA: | |
| pvt->pci_ta = pdev; | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS: | |
| pvt->pci_ras = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD0: | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD1: | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD2: | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD3: | |
| { | |
| int id = pdev->device - PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD0; | |
| pvt->pci_tad[id] = pdev; | |
| saw_chan_mask |= 1 << id; | |
| } | |
| break; | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_2HA_DDRIO0: | |
| pvt->pci_ddrio = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_1HA_DDRIO0: | |
| pvt->pci_ddrio = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_SAD: | |
| pvt->pci_sad0 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_BR0: | |
| pvt->pci_br0 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_BR1: | |
| pvt->pci_br1 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1: | |
| pvt->pci_ha1 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0: | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD1: | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD2: | |
| case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD3: | |
| { | |
| int id = pdev->device - PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0 + 4; | |
| pvt->pci_tad[id] = pdev; | |
| saw_chan_mask |= 1 << id; | |
| } | |
| break; | |
| default: | |
| goto error; | |
| } | |
| edac_dbg(0, "Associated PCI %02x.%02d.%d with dev = %p\n", | |
| sbridge_dev->bus, | |
| PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), | |
| pdev); | |
| } | |
| /* Check if everything were registered */ | |
| if (!pvt->pci_sad0 || !pvt->pci_ha0 || !pvt->pci_br0 || | |
| !pvt->pci_br1 || !pvt->pci_ras || !pvt->pci_ta) | |
| goto enodev; | |
| if (saw_chan_mask != 0x0f && /* -EN */ | |
| saw_chan_mask != 0x33 && /* -EP */ | |
| saw_chan_mask != 0xff) /* -EX */ | |
| goto enodev; | |
| return 0; | |
| enodev: | |
| sbridge_printk(KERN_ERR, "Some needed devices are missing\n"); | |
| return -ENODEV; | |
| error: | |
| sbridge_printk(KERN_ERR, | |
| "Unexpected device %02x:%02x\n", PCI_VENDOR_ID_INTEL, | |
| pdev->device); | |
| return -EINVAL; | |
| } | |
| static int haswell_mci_bind_devs(struct mem_ctl_info *mci, | |
| struct sbridge_dev *sbridge_dev) | |
| { | |
| struct sbridge_pvt *pvt = mci->pvt_info; | |
| struct pci_dev *pdev; | |
| u8 saw_chan_mask = 0; | |
| int i; | |
| /* there's only one device per system; not tied to any bus */ | |
| if (pvt->info.pci_vtd == NULL) | |
| /* result will be checked later */ | |
| pvt->info.pci_vtd = pci_get_device(PCI_VENDOR_ID_INTEL, | |
| PCI_DEVICE_ID_INTEL_HASWELL_IMC_VTD_MISC, | |
| NULL); | |
| for (i = 0; i < sbridge_dev->n_devs; i++) { | |
| pdev = sbridge_dev->pdev[i]; | |
| if (!pdev) | |
| continue; | |
| switch (pdev->device) { | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD0: | |
| pvt->pci_sad0 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD1: | |
| pvt->pci_sad1 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0: | |
| pvt->pci_ha0 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TA: | |
| pvt->pci_ta = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_THERMAL: | |
| pvt->pci_ras = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD0: | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD1: | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD2: | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD3: | |
| { | |
| int id = pdev->device - PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD0; | |
| pvt->pci_tad[id] = pdev; | |
| saw_chan_mask |= 1 << id; | |
| } | |
| break; | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD0: | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD1: | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD2: | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD3: | |
| { | |
| int id = pdev->device - PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD0 + 4; | |
| pvt->pci_tad[id] = pdev; | |
| saw_chan_mask |= 1 << id; | |
| } | |
| break; | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO0: | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO1: | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO2: | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO3: | |
| if (!pvt->pci_ddrio) | |
| pvt->pci_ddrio = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1: | |
| pvt->pci_ha1 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TA: | |
| pvt->pci_ha1_ta = pdev; | |
| break; | |
| default: | |
| break; | |
| } | |
| edac_dbg(0, "Associated PCI %02x.%02d.%d with dev = %p\n", | |
| sbridge_dev->bus, | |
| PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), | |
| pdev); | |
| } | |
| /* Check if everything were registered */ | |
| if (!pvt->pci_sad0 || !pvt->pci_ha0 || !pvt->pci_sad1 || | |
| !pvt->pci_ras || !pvt->pci_ta || !pvt->info.pci_vtd) | |
| goto enodev; | |
| if (saw_chan_mask != 0x0f && /* -EN */ | |
| saw_chan_mask != 0x33 && /* -EP */ | |
| saw_chan_mask != 0xff) /* -EX */ | |
| goto enodev; | |
| return 0; | |
| enodev: | |
| sbridge_printk(KERN_ERR, "Some needed devices are missing\n"); | |
| return -ENODEV; | |
| } | |
| static int broadwell_mci_bind_devs(struct mem_ctl_info *mci, | |
| struct sbridge_dev *sbridge_dev) | |
| { | |
| struct sbridge_pvt *pvt = mci->pvt_info; | |
| struct pci_dev *pdev; | |
| u8 saw_chan_mask = 0; | |
| int i; | |
| /* there's only one device per system; not tied to any bus */ | |
| if (pvt->info.pci_vtd == NULL) | |
| /* result will be checked later */ | |
| pvt->info.pci_vtd = pci_get_device(PCI_VENDOR_ID_INTEL, | |
| PCI_DEVICE_ID_INTEL_BROADWELL_IMC_VTD_MISC, | |
| NULL); | |
| for (i = 0; i < sbridge_dev->n_devs; i++) { | |
| pdev = sbridge_dev->pdev[i]; | |
| if (!pdev) | |
| continue; | |
| switch (pdev->device) { | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD0: | |
| pvt->pci_sad0 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD1: | |
| pvt->pci_sad1 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0: | |
| pvt->pci_ha0 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TA: | |
| pvt->pci_ta = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_THERMAL: | |
| pvt->pci_ras = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD0: | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD1: | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD2: | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD3: | |
| { | |
| int id = pdev->device - PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD0; | |
| pvt->pci_tad[id] = pdev; | |
| saw_chan_mask |= 1 << id; | |
| } | |
| break; | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD0: | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD1: | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD2: | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD3: | |
| { | |
| int id = pdev->device - PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD0 + 4; | |
| pvt->pci_tad[id] = pdev; | |
| saw_chan_mask |= 1 << id; | |
| } | |
| break; | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_DDRIO0: | |
| pvt->pci_ddrio = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1: | |
| pvt->pci_ha1 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TA: | |
| pvt->pci_ha1_ta = pdev; | |
| break; | |
| default: | |
| break; | |
| } | |
| edac_dbg(0, "Associated PCI %02x.%02d.%d with dev = %p\n", | |
| sbridge_dev->bus, | |
| PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), | |
| pdev); | |
| } | |
| /* Check if everything were registered */ | |
| if (!pvt->pci_sad0 || !pvt->pci_ha0 || !pvt->pci_sad1 || | |
| !pvt->pci_ras || !pvt->pci_ta || !pvt->info.pci_vtd) | |
| goto enodev; | |
| if (saw_chan_mask != 0x0f && /* -EN */ | |
| saw_chan_mask != 0x33 && /* -EP */ | |
| saw_chan_mask != 0xff) /* -EX */ | |
| goto enodev; | |
| return 0; | |
| enodev: | |
| sbridge_printk(KERN_ERR, "Some needed devices are missing\n"); | |
| return -ENODEV; | |
| } | |
| static int knl_mci_bind_devs(struct mem_ctl_info *mci, | |
| struct sbridge_dev *sbridge_dev) | |
| { | |
| struct sbridge_pvt *pvt = mci->pvt_info; | |
| struct pci_dev *pdev; | |
| int dev, func; | |
| int i; | |
| int devidx; | |
| for (i = 0; i < sbridge_dev->n_devs; i++) { | |
| pdev = sbridge_dev->pdev[i]; | |
| if (!pdev) | |
| continue; | |
| /* Extract PCI device and function. */ | |
| dev = (pdev->devfn >> 3) & 0x1f; | |
| func = pdev->devfn & 0x7; | |
| switch (pdev->device) { | |
| case PCI_DEVICE_ID_INTEL_KNL_IMC_MC: | |
| if (dev == 8) | |
| pvt->knl.pci_mc0 = pdev; | |
| else if (dev == 9) | |
| pvt->knl.pci_mc1 = pdev; | |
| else { | |
| sbridge_printk(KERN_ERR, | |
| "Memory controller in unexpected place! (dev %d, fn %d)\n", | |
| dev, func); | |
| continue; | |
| } | |
| break; | |
| case PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0: | |
| pvt->pci_sad0 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1: | |
| pvt->pci_sad1 = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_KNL_IMC_CHA: | |
| /* There are one of these per tile, and range from | |
| * 1.14.0 to 1.18.5. | |
| */ | |
| devidx = ((dev-14)*8)+func; | |
| if (devidx < 0 || devidx >= KNL_MAX_CHAS) { | |
| sbridge_printk(KERN_ERR, | |
| "Caching and Home Agent in unexpected place! (dev %d, fn %d)\n", | |
| dev, func); | |
| continue; | |
| } | |
| WARN_ON(pvt->knl.pci_cha[devidx] != NULL); | |
| pvt->knl.pci_cha[devidx] = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_KNL_IMC_CHANNEL: | |
| devidx = -1; | |
| /* | |
| * MC0 channels 0-2 are device 9 function 2-4, | |
| * MC1 channels 3-5 are device 8 function 2-4. | |
| */ | |
| if (dev == 9) | |
| devidx = func-2; | |
| else if (dev == 8) | |
| devidx = 3 + (func-2); | |
| if (devidx < 0 || devidx >= KNL_MAX_CHANNELS) { | |
| sbridge_printk(KERN_ERR, | |
| "DRAM Channel Registers in unexpected place! (dev %d, fn %d)\n", | |
| dev, func); | |
| continue; | |
| } | |
| WARN_ON(pvt->knl.pci_channel[devidx] != NULL); | |
| pvt->knl.pci_channel[devidx] = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM: | |
| pvt->knl.pci_mc_info = pdev; | |
| break; | |
| case PCI_DEVICE_ID_INTEL_KNL_IMC_TA: | |
| pvt->pci_ta = pdev; | |
| break; | |
| default: | |
| sbridge_printk(KERN_ERR, "Unexpected device %d\n", | |
| pdev->device); | |
| break; | |
| } | |
| } | |
| if (!pvt->knl.pci_mc0 || !pvt->knl.pci_mc1 || | |
| !pvt->pci_sad0 || !pvt->pci_sad1 || | |
| !pvt->pci_ta) { | |
| goto enodev; | |
| } | |
| for (i = 0; i < KNL_MAX_CHANNELS; i++) { | |
| if (!pvt->knl.pci_channel[i]) { | |
| sbridge_printk(KERN_ERR, "Missing channel %d\n", i); | |
| goto enodev; | |
| } | |
| } | |
| for (i = 0; i < KNL_MAX_CHAS; i++) { | |
| if (!pvt->knl.pci_cha[i]) { | |
| sbridge_printk(KERN_ERR, "Missing CHA %d\n", i); | |
| goto enodev; | |
| } | |
| } | |
| return 0; | |
| enodev: | |
| sbridge_printk(KERN_ERR, "Some needed devices are missing\n"); | |
| return -ENODEV; | |
| } | |
| /**************************************************************************** | |
| Error check routines | |
| ****************************************************************************/ | |
| /* | |
| * While Sandy Bridge has error count registers, SMI BIOS read values from | |
| * and resets the counters. So, they are not reliable for the OS to read | |
| * from them. So, we have no option but to just trust on whatever MCE is | |
| * telling us about the errors. | |
| */ | |
| static void sbridge_mce_output_error(struct mem_ctl_info *mci, | |
| const struct mce *m) | |
| { | |
| struct mem_ctl_info *new_mci; | |
| struct sbridge_pvt *pvt = mci->pvt_info; | |
| enum hw_event_mc_err_type tp_event; | |
| char *type, *optype, msg[256]; | |
| bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0); | |
| bool overflow = GET_BITFIELD(m->status, 62, 62); | |
| bool uncorrected_error = GET_BITFIELD(m->status, 61, 61); | |
| bool recoverable; | |
| u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52); | |
| u32 mscod = GET_BITFIELD(m->status, 16, 31); | |
| u32 errcode = GET_BITFIELD(m->status, 0, 15); | |
| u32 channel = GET_BITFIELD(m->status, 0, 3); | |
| u32 optypenum = GET_BITFIELD(m->status, 4, 6); | |
| long channel_mask, first_channel; | |
| u8 rank, socket, ha; | |
| int rc, dimm; | |
| char *area_type = NULL; | |
| if (pvt->info.type != SANDY_BRIDGE) | |
| recoverable = true; | |
| else | |
| recoverable = GET_BITFIELD(m->status, 56, 56); | |
| if (uncorrected_error) { | |
| if (ripv) { | |
| type = "FATAL"; | |
| tp_event = HW_EVENT_ERR_FATAL; | |
| } else { | |
| type = "NON_FATAL"; | |
| tp_event = HW_EVENT_ERR_UNCORRECTED; | |
| } | |
| } else { | |
| type = "CORRECTED"; | |
| tp_event = HW_EVENT_ERR_CORRECTED; | |
| } | |
| /* | |
| * According with Table 15-9 of the Intel Architecture spec vol 3A, | |
| * memory errors should fit in this mask: | |
| * 000f 0000 1mmm cccc (binary) | |
| * where: | |
| * f = Correction Report Filtering Bit. If 1, subsequent errors | |
| * won't be shown | |
| * mmm = error type | |
| * cccc = channel | |
| * If the mask doesn't match, report an error to the parsing logic | |
| */ | |
| if (! ((errcode & 0xef80) == 0x80)) { | |
| optype = "Can't parse: it is not a mem"; | |
| } else { | |
| switch (optypenum) { | |
| case 0: | |
| optype = "generic undef request error"; | |
| break; | |
| case 1: | |
| optype = "memory read error"; | |
| break; | |
| case 2: | |
| optype = "memory write error"; | |
| break; | |
| case 3: | |
| optype = "addr/cmd error"; | |
| break; | |
| case 4: | |
| optype = "memory scrubbing error"; | |
| break; | |
| default: | |
| optype = "reserved"; | |
| break; | |
| } | |
| } | |
| /* Only decode errors with an valid address (ADDRV) */ | |
| if (!GET_BITFIELD(m->status, 58, 58)) | |
| return; | |
| if (pvt->info.type == KNIGHTS_LANDING) { | |
| if (channel == 14) { | |
| edac_dbg(0, "%s%s err_code:%04x:%04x EDRAM bank %d\n", | |
| overflow ? " OVERFLOW" : "", | |
| (uncorrected_error && recoverable) | |
| ? " recoverable" : "", | |
| mscod, errcode, | |
| m->bank); | |
| } else { | |
| char A = *("A"); | |
| /* | |
| * Reported channel is in range 0-2, so we can't map it | |
| * back to mc. To figure out mc we check machine check | |
| * bank register that reported this error. | |
| * bank15 means mc0 and bank16 means mc1. | |
| */ | |
| channel = knl_channel_remap(m->bank == 16, channel); | |
| channel_mask = 1 << channel; | |
| snprintf(msg, sizeof(msg), | |
| "%s%s err_code:%04x:%04x channel:%d (DIMM_%c)", | |
| overflow ? " OVERFLOW" : "", | |
| (uncorrected_error && recoverable) | |
| ? " recoverable" : " ", | |
| mscod, errcode, channel, A + channel); | |
| edac_mc_handle_error(tp_event, mci, core_err_cnt, | |
| m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0, | |
| channel, 0, -1, | |
| optype, msg); | |
| } | |
| return; | |
| } else { | |
| rc = get_memory_error_data(mci, m->addr, &socket, &ha, | |
| &channel_mask, &rank, &area_type, msg); | |
| } | |
| if (rc < 0) | |
| goto err_parsing; | |
| new_mci = get_mci_for_node_id(socket); | |
| if (!new_mci) { | |
| strcpy(msg, "Error: socket got corrupted!"); | |
| goto err_parsing; | |
| } | |
| mci = new_mci; | |
| pvt = mci->pvt_info; | |
| first_channel = find_first_bit(&channel_mask, NUM_CHANNELS); | |
| if (rank < 4) | |
| dimm = 0; | |
| else if (rank < 8) | |
| dimm = 1; | |
| else | |
| dimm = 2; | |
| /* | |
| * FIXME: On some memory configurations (mirror, lockstep), the | |
| * Memory Controller can't point the error to a single DIMM. The | |
| * EDAC core should be handling the channel mask, in order to point | |
| * to the group of dimm's where the error may be happening. | |
| */ | |
| if (!pvt->is_lockstep && !pvt->is_mirrored && !pvt->is_close_pg) | |
| channel = first_channel; | |
| snprintf(msg, sizeof(msg), | |
| "%s%s area:%s err_code:%04x:%04x socket:%d ha:%d channel_mask:%ld rank:%d", | |
| overflow ? " OVERFLOW" : "", | |
| (uncorrected_error && recoverable) ? " recoverable" : "", | |
| area_type, | |
| mscod, errcode, | |
| socket, ha, | |
| channel_mask, | |
| rank); | |
| edac_dbg(0, "%s\n", msg); | |
| /* FIXME: need support for channel mask */ | |
| if (channel == CHANNEL_UNSPECIFIED) | |
| channel = -1; | |
| /* Call the helper to output message */ | |
| edac_mc_handle_error(tp_event, mci, core_err_cnt, | |
| m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0, | |
| 4*ha+channel, dimm, -1, | |
| optype, msg); | |
| return; | |
| err_parsing: | |
| edac_mc_handle_error(tp_event, mci, core_err_cnt, 0, 0, 0, | |
| -1, -1, -1, | |
| msg, ""); | |
| } | |
| /* | |
| * Check that logging is enabled and that this is the right type | |
| * of error for us to handle. | |
| */ | |
| static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val, | |
| void *data) | |
| { | |
| struct mce *mce = (struct mce *)data; | |
| struct mem_ctl_info *mci; | |
| struct sbridge_pvt *pvt; | |
| char *type; | |
| if (get_edac_report_status() == EDAC_REPORTING_DISABLED) | |
| return NOTIFY_DONE; | |
| mci = get_mci_for_node_id(mce->socketid); | |
| if (!mci) | |
| return NOTIFY_DONE; | |
| pvt = mci->pvt_info; | |
| /* | |
| * Just let mcelog handle it if the error is | |
| * outside the memory controller. A memory error | |
| * is indicated by bit 7 = 1 and bits = 8-11,13-15 = 0. | |
| * bit 12 has an special meaning. | |
| */ | |
| if ((mce->status & 0xefff) >> 7 != 1) | |
| return NOTIFY_DONE; | |
| if (mce->mcgstatus & MCG_STATUS_MCIP) | |
| type = "Exception"; | |
| else | |
| type = "Event"; | |
| sbridge_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n"); | |
| sbridge_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: %Lx " | |
| "Bank %d: %016Lx\n", mce->extcpu, type, | |
| mce->mcgstatus, mce->bank, mce->status); | |
| sbridge_mc_printk(mci, KERN_DEBUG, "TSC %llx ", mce->tsc); | |
| sbridge_mc_printk(mci, KERN_DEBUG, "ADDR %llx ", mce->addr); | |
| sbridge_mc_printk(mci, KERN_DEBUG, "MISC %llx ", mce->misc); | |
| sbridge_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:%x TIME %llu SOCKET " | |
| "%u APIC %x\n", mce->cpuvendor, mce->cpuid, | |
| mce->time, mce->socketid, mce->apicid); | |
| sbridge_mce_output_error(mci, mce); | |
| /* Advice mcelog that the error were handled */ | |
| return NOTIFY_STOP; | |
| } | |
| static struct notifier_block sbridge_mce_dec = { | |
| .notifier_call = sbridge_mce_check_error, | |
| }; | |
| /**************************************************************************** | |
| EDAC register/unregister logic | |
| ****************************************************************************/ | |
| static void sbridge_unregister_mci(struct sbridge_dev *sbridge_dev) | |
| { | |
| struct mem_ctl_info *mci = sbridge_dev->mci; | |
| struct sbridge_pvt *pvt; | |
| if (unlikely(!mci || !mci->pvt_info)) { | |
| edac_dbg(0, "MC: dev = %p\n", &sbridge_dev->pdev[0]->dev); | |
| sbridge_printk(KERN_ERR, "Couldn't find mci handler\n"); | |
| return; | |
| } | |
| pvt = mci->pvt_info; | |
| edac_dbg(0, "MC: mci = %p, dev = %p\n", | |
| mci, &sbridge_dev->pdev[0]->dev); | |
| /* Remove MC sysfs nodes */ | |
| edac_mc_del_mc(mci->pdev); | |
| edac_dbg(1, "%s: free mci struct\n", mci->ctl_name); | |
| kfree(mci->ctl_name); | |
| edac_mc_free(mci); | |
| sbridge_dev->mci = NULL; | |
| } | |
| static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type) | |
| { | |
| struct mem_ctl_info *mci; | |
| struct edac_mc_layer layers[2]; | |
| struct sbridge_pvt *pvt; | |
| struct pci_dev *pdev = sbridge_dev->pdev[0]; | |
| int rc; | |
| /* Check the number of active and not disabled channels */ | |
| rc = check_if_ecc_is_active(sbridge_dev->bus, type); | |
| if (unlikely(rc < 0)) | |
| return rc; | |
| /* allocate a new MC control structure */ | |
| layers[0].type = EDAC_MC_LAYER_CHANNEL; | |
| layers[0].size = type == KNIGHTS_LANDING ? | |
| KNL_MAX_CHANNELS : NUM_CHANNELS; | |
| layers[0].is_virt_csrow = false; | |
| layers[1].type = EDAC_MC_LAYER_SLOT; | |
| layers[1].size = type == KNIGHTS_LANDING ? 1 : MAX_DIMMS; | |
| layers[1].is_virt_csrow = true; | |
| mci = edac_mc_alloc(sbridge_dev->mc, ARRAY_SIZE(layers), layers, | |
| sizeof(*pvt)); | |
| if (unlikely(!mci)) | |
| return -ENOMEM; | |
| edac_dbg(0, "MC: mci = %p, dev = %p\n", | |
| mci, &pdev->dev); | |
| pvt = mci->pvt_info; | |
| memset(pvt, 0, sizeof(*pvt)); | |
| /* Associate sbridge_dev and mci for future usage */ | |
| pvt->sbridge_dev = sbridge_dev; | |
| sbridge_dev->mci = mci; | |
| mci->mtype_cap = type == KNIGHTS_LANDING ? | |
| MEM_FLAG_DDR4 : MEM_FLAG_DDR3; | |
| mci->edac_ctl_cap = EDAC_FLAG_NONE; | |
| mci->edac_cap = EDAC_FLAG_NONE; | |
| mci->mod_name = "sbridge_edac.c"; | |
| mci->mod_ver = SBRIDGE_REVISION; | |
| mci->dev_name = pci_name(pdev); | |
| mci->ctl_page_to_phys = NULL; | |
| pvt->info.type = type; | |
| switch (type) { | |
| case IVY_BRIDGE: | |
| pvt->info.rankcfgr = IB_RANK_CFG_A; | |
| pvt->info.get_tolm = ibridge_get_tolm; | |
| pvt->info.get_tohm = ibridge_get_tohm; | |
| pvt->info.dram_rule = ibridge_dram_rule; | |
| pvt->info.get_memory_type = get_memory_type; | |
| pvt->info.get_node_id = get_node_id; | |
| pvt->info.rir_limit = rir_limit; | |
| pvt->info.sad_limit = sad_limit; | |
| pvt->info.interleave_mode = interleave_mode; | |
| pvt->info.show_interleave_mode = show_interleave_mode; | |
| pvt->info.dram_attr = dram_attr; | |
| pvt->info.max_sad = ARRAY_SIZE(ibridge_dram_rule); | |
| pvt->info.interleave_list = ibridge_interleave_list; | |
| pvt->info.max_interleave = ARRAY_SIZE(ibridge_interleave_list); | |
| pvt->info.interleave_pkg = ibridge_interleave_pkg; | |
| pvt->info.get_width = ibridge_get_width; | |
| mci->ctl_name = kasprintf(GFP_KERNEL, "Ivy Bridge Socket#%d", mci->mc_idx); | |
| /* Store pci devices at mci for faster access */ | |
| rc = ibridge_mci_bind_devs(mci, sbridge_dev); | |
| if (unlikely(rc < 0)) | |
| goto fail0; | |
| break; | |
| case SANDY_BRIDGE: | |
| pvt->info.rankcfgr = SB_RANK_CFG_A; | |
| pvt->info.get_tolm = sbridge_get_tolm; | |
| pvt->info.get_tohm = sbridge_get_tohm; | |
| pvt->info.dram_rule = sbridge_dram_rule; | |
| pvt->info.get_memory_type = get_memory_type; | |
| pvt->info.get_node_id = get_node_id; | |
| pvt->info.rir_limit = rir_limit; | |
| pvt->info.sad_limit = sad_limit; | |
| pvt->info.interleave_mode = interleave_mode; | |
| pvt->info.show_interleave_mode = show_interleave_mode; | |
| pvt->info.dram_attr = dram_attr; | |
| pvt->info.max_sad = ARRAY_SIZE(sbridge_dram_rule); | |
| pvt->info.interleave_list = sbridge_interleave_list; | |
| pvt->info.max_interleave = ARRAY_SIZE(sbridge_interleave_list); | |
| pvt->info.interleave_pkg = sbridge_interleave_pkg; | |
| pvt->info.get_width = sbridge_get_width; | |
| mci->ctl_name = kasprintf(GFP_KERNEL, "Sandy Bridge Socket#%d", mci->mc_idx); | |
| /* Store pci devices at mci for faster access */ | |
| rc = sbridge_mci_bind_devs(mci, sbridge_dev); | |
| if (unlikely(rc < 0)) | |
| goto fail0; | |
| break; | |
| case HASWELL: | |
| /* rankcfgr isn't used */ | |
| pvt->info.get_tolm = haswell_get_tolm; | |
| pvt->info.get_tohm = haswell_get_tohm; | |
| pvt->info.dram_rule = ibridge_dram_rule; | |
| pvt->info.get_memory_type = haswell_get_memory_type; | |
| pvt->info.get_node_id = haswell_get_node_id; | |
| pvt->info.rir_limit = haswell_rir_limit; | |
| pvt->info.sad_limit = sad_limit; | |
| pvt->info.interleave_mode = interleave_mode; | |
| pvt->info.show_interleave_mode = show_interleave_mode; | |
| pvt->info.dram_attr = dram_attr; | |
| pvt->info.max_sad = ARRAY_SIZE(ibridge_dram_rule); | |
| pvt->info.interleave_list = ibridge_interleave_list; | |
| pvt->info.max_interleave = ARRAY_SIZE(ibridge_interleave_list); | |
| pvt->info.interleave_pkg = ibridge_interleave_pkg; | |
| pvt->info.get_width = ibridge_get_width; | |
| mci->ctl_name = kasprintf(GFP_KERNEL, "Haswell Socket#%d", mci->mc_idx); | |
| /* Store pci devices at mci for faster access */ | |
| rc = haswell_mci_bind_devs(mci, sbridge_dev); | |
| if (unlikely(rc < 0)) | |
| goto fail0; | |
| break; | |
| case BROADWELL: | |
| /* rankcfgr isn't used */ | |
| pvt->info.get_tolm = haswell_get_tolm; | |
| pvt->info.get_tohm = haswell_get_tohm; | |
| pvt->info.dram_rule = ibridge_dram_rule; | |
| pvt->info.get_memory_type = haswell_get_memory_type; | |
| pvt->info.get_node_id = haswell_get_node_id; | |
| pvt->info.rir_limit = haswell_rir_limit; | |
| pvt->info.sad_limit = sad_limit; | |
| pvt->info.interleave_mode = interleave_mode; | |
| pvt->info.show_interleave_mode = show_interleave_mode; | |
| pvt->info.dram_attr = dram_attr; | |
| pvt->info.max_sad = ARRAY_SIZE(ibridge_dram_rule); | |
| pvt->info.interleave_list = ibridge_interleave_list; | |
| pvt->info.max_interleave = ARRAY_SIZE(ibridge_interleave_list); | |
| pvt->info.interleave_pkg = ibridge_interleave_pkg; | |
| pvt->info.get_width = broadwell_get_width; | |
| mci->ctl_name = kasprintf(GFP_KERNEL, "Broadwell Socket#%d", mci->mc_idx); | |
| /* Store pci devices at mci for faster access */ | |
| rc = broadwell_mci_bind_devs(mci, sbridge_dev); | |
| if (unlikely(rc < 0)) | |
| goto fail0; | |
| break; | |
| case KNIGHTS_LANDING: | |
| /* pvt->info.rankcfgr == ??? */ | |
| pvt->info.get_tolm = knl_get_tolm; | |
| pvt->info.get_tohm = knl_get_tohm; | |
| pvt->info.dram_rule = knl_dram_rule; | |
| pvt->info.get_memory_type = knl_get_memory_type; | |
| pvt->info.get_node_id = knl_get_node_id; | |
| pvt->info.rir_limit = NULL; | |
| pvt->info.sad_limit = knl_sad_limit; | |
| pvt->info.interleave_mode = knl_interleave_mode; | |
| pvt->info.show_interleave_mode = knl_show_interleave_mode; | |
| pvt->info.dram_attr = dram_attr_knl; | |
| pvt->info.max_sad = ARRAY_SIZE(knl_dram_rule); | |
| pvt->info.interleave_list = knl_interleave_list; | |
| pvt->info.max_interleave = ARRAY_SIZE(knl_interleave_list); | |
| pvt->info.interleave_pkg = ibridge_interleave_pkg; | |
| pvt->info.get_width = knl_get_width; | |
| mci->ctl_name = kasprintf(GFP_KERNEL, | |
| "Knights Landing Socket#%d", mci->mc_idx); | |
| rc = knl_mci_bind_devs(mci, sbridge_dev); | |
| if (unlikely(rc < 0)) | |
| goto fail0; | |
| break; | |
| } | |
| /* Get dimm basic config and the memory layout */ | |
| get_dimm_config(mci); | |
| get_memory_layout(mci); | |
| /* record ptr to the generic device */ | |
| mci->pdev = &pdev->dev; | |
| /* add this new MC control structure to EDAC's list of MCs */ | |
| if (unlikely(edac_mc_add_mc(mci))) { | |
| edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); | |
| rc = -EINVAL; | |
| goto fail0; | |
| } | |
| return 0; | |
| fail0: | |
| kfree(mci->ctl_name); | |
| edac_mc_free(mci); | |
| sbridge_dev->mci = NULL; | |
| return rc; | |
| } | |
| #define ICPU(model, table) \ | |
| { X86_VENDOR_INTEL, 6, model, 0, (unsigned long)&table } | |
| static const struct x86_cpu_id sbridge_cpuids[] = { | |
| ICPU(0x2d, pci_dev_descr_sbridge_table), /* SANDY_BRIDGE */ | |
| ICPU(0x3e, pci_dev_descr_ibridge_table), /* IVY_BRIDGE */ | |
| ICPU(0x3f, pci_dev_descr_haswell_table), /* HASWELL */ | |
| ICPU(0x4f, pci_dev_descr_broadwell_table), /* BROADWELL */ | |
| ICPU(0x56, pci_dev_descr_broadwell_table), /* BROADWELL-DE */ | |
| ICPU(0x57, pci_dev_descr_knl_table), /* KNIGHTS_LANDING */ | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(x86cpu, sbridge_cpuids); | |
| /* | |
| * sbridge_probe Get all devices and register memory controllers | |
| * present. | |
| * return: | |
| * 0 for FOUND a device | |
| * < 0 for error code | |
| */ | |
| static int sbridge_probe(const struct x86_cpu_id *id) | |
| { | |
| int rc = -ENODEV; | |
| u8 mc, num_mc = 0; | |
| struct sbridge_dev *sbridge_dev; | |
| struct pci_id_table *ptable = (struct pci_id_table *)id->driver_data; | |
| /* get the pci devices we want to reserve for our use */ | |
| rc = sbridge_get_all_devices(&num_mc, ptable); | |
| if (unlikely(rc < 0)) { | |
| edac_dbg(0, "couldn't get all devices\n"); | |
| goto fail0; | |
| } | |
| mc = 0; | |
| list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) { | |
| edac_dbg(0, "Registering MC#%d (%d of %d)\n", | |
| mc, mc + 1, num_mc); | |
| sbridge_dev->mc = mc++; | |
| rc = sbridge_register_mci(sbridge_dev, ptable->type); | |
| if (unlikely(rc < 0)) | |
| goto fail1; | |
| } | |
| sbridge_printk(KERN_INFO, "%s\n", SBRIDGE_REVISION); | |
| return 0; | |
| fail1: | |
| list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) | |
| sbridge_unregister_mci(sbridge_dev); | |
| sbridge_put_all_devices(); | |
| fail0: | |
| return rc; | |
| } | |
| /* | |
| * sbridge_remove cleanup | |
| * | |
| */ | |
| static void sbridge_remove(void) | |
| { | |
| struct sbridge_dev *sbridge_dev; | |
| edac_dbg(0, "\n"); | |
| list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) | |
| sbridge_unregister_mci(sbridge_dev); | |
| /* Release PCI resources */ | |
| sbridge_put_all_devices(); | |
| } | |
| /* | |
| * sbridge_init Module entry function | |
| * Try to initialize this module for its devices | |
| */ | |
| static int __init sbridge_init(void) | |
| { | |
| const struct x86_cpu_id *id; | |
| int rc; | |
| edac_dbg(2, "\n"); | |
| id = x86_match_cpu(sbridge_cpuids); | |
| if (!id) | |
| return -ENODEV; | |
| /* Ensure that the OPSTATE is set correctly for POLL or NMI */ | |
| opstate_init(); | |
| rc = sbridge_probe(id); | |
| if (rc >= 0) { | |
| mce_register_decode_chain(&sbridge_mce_dec); | |
| if (get_edac_report_status() == EDAC_REPORTING_DISABLED) | |
| sbridge_printk(KERN_WARNING, "Loading driver, error reporting disabled.\n"); | |
| return 0; | |
| } | |
| sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n", | |
| rc); | |
| return rc; | |
| } | |
| /* | |
| * sbridge_exit() Module exit function | |
| * Unregister the driver | |
| */ | |
| static void __exit sbridge_exit(void) | |
| { | |
| edac_dbg(2, "\n"); | |
| sbridge_remove(); | |
| mce_unregister_decode_chain(&sbridge_mce_dec); | |
| } | |
| module_init(sbridge_init); | |
| module_exit(sbridge_exit); | |
| module_param(edac_op_state, int, 0444); | |
| MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Mauro Carvalho Chehab"); | |
| MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)"); | |
| MODULE_DESCRIPTION("MC Driver for Intel Sandy Bridge and Ivy Bridge memory controllers - " | |
| SBRIDGE_REVISION); |