| /* | |
| * extcon-max77843.c - Maxim MAX77843 extcon driver to support | |
| * MUIC(Micro USB Interface Controller) | |
| * | |
| * Copyright (C) 2015 Samsung Electronics | |
| * Author: Jaewon Kim <jaewon02.kim@samsung.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| #include <linux/extcon.h> | |
| #include <linux/i2c.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mfd/max77693-common.h> | |
| #include <linux/mfd/max77843-private.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/workqueue.h> | |
| #define DELAY_MS_DEFAULT 15000 /* unit: millisecond */ | |
| enum max77843_muic_status { | |
| MAX77843_MUIC_STATUS1 = 0, | |
| MAX77843_MUIC_STATUS2, | |
| MAX77843_MUIC_STATUS3, | |
| MAX77843_MUIC_STATUS_NUM, | |
| }; | |
| struct max77843_muic_info { | |
| struct device *dev; | |
| struct max77693_dev *max77843; | |
| struct extcon_dev *edev; | |
| struct mutex mutex; | |
| struct work_struct irq_work; | |
| struct delayed_work wq_detcable; | |
| u8 status[MAX77843_MUIC_STATUS_NUM]; | |
| int prev_cable_type; | |
| int prev_chg_type; | |
| int prev_gnd_type; | |
| bool irq_adc; | |
| bool irq_chg; | |
| }; | |
| enum max77843_muic_cable_group { | |
| MAX77843_CABLE_GROUP_ADC = 0, | |
| MAX77843_CABLE_GROUP_ADC_GND, | |
| MAX77843_CABLE_GROUP_CHG, | |
| }; | |
| enum max77843_muic_adc_debounce_time { | |
| MAX77843_DEBOUNCE_TIME_5MS = 0, | |
| MAX77843_DEBOUNCE_TIME_10MS, | |
| MAX77843_DEBOUNCE_TIME_25MS, | |
| MAX77843_DEBOUNCE_TIME_38_62MS, | |
| }; | |
| /* Define accessory cable type */ | |
| enum max77843_muic_accessory_type { | |
| MAX77843_MUIC_ADC_GROUND = 0, | |
| MAX77843_MUIC_ADC_SEND_END_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S1_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S2_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S3_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S4_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S5_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S6_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S7_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S8_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S9_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S10_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S11_BUTTON, | |
| MAX77843_MUIC_ADC_REMOTE_S12_BUTTON, | |
| MAX77843_MUIC_ADC_RESERVED_ACC_1, | |
| MAX77843_MUIC_ADC_RESERVED_ACC_2, | |
| MAX77843_MUIC_ADC_RESERVED_ACC_3, | |
| MAX77843_MUIC_ADC_RESERVED_ACC_4, | |
| MAX77843_MUIC_ADC_RESERVED_ACC_5, | |
| MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2, | |
| MAX77843_MUIC_ADC_PHONE_POWERED_DEV, | |
| MAX77843_MUIC_ADC_TTY_CONVERTER, | |
| MAX77843_MUIC_ADC_UART_CABLE, | |
| MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG, | |
| MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF, | |
| MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON, | |
| MAX77843_MUIC_ADC_AV_CABLE_NOLOAD, | |
| MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG, | |
| MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF, | |
| MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON, | |
| MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1, | |
| MAX77843_MUIC_ADC_OPEN, | |
| /* The blow accessories should check | |
| not only ADC value but also ADC1K and VBVolt value. */ | |
| /* Offset|ADC1K|VBVolt| */ | |
| MAX77843_MUIC_GND_USB_HOST = 0x100, /* 0x1| 0| 0| */ | |
| MAX77843_MUIC_GND_USB_HOST_VB = 0x101, /* 0x1| 0| 1| */ | |
| MAX77843_MUIC_GND_MHL = 0x102, /* 0x1| 1| 0| */ | |
| MAX77843_MUIC_GND_MHL_VB = 0x103, /* 0x1| 1| 1| */ | |
| }; | |
| /* Define charger cable type */ | |
| enum max77843_muic_charger_type { | |
| MAX77843_MUIC_CHG_NONE = 0, | |
| MAX77843_MUIC_CHG_USB, | |
| MAX77843_MUIC_CHG_DOWNSTREAM, | |
| MAX77843_MUIC_CHG_DEDICATED, | |
| MAX77843_MUIC_CHG_SPECIAL_500MA, | |
| MAX77843_MUIC_CHG_SPECIAL_1A, | |
| MAX77843_MUIC_CHG_SPECIAL_BIAS, | |
| MAX77843_MUIC_CHG_RESERVED, | |
| MAX77843_MUIC_CHG_GND, | |
| }; | |
| static const unsigned int max77843_extcon_cable[] = { | |
| EXTCON_USB, | |
| EXTCON_USB_HOST, | |
| EXTCON_CHG_USB_SDP, | |
| EXTCON_CHG_USB_DCP, | |
| EXTCON_CHG_USB_CDP, | |
| EXTCON_CHG_USB_FAST, | |
| EXTCON_CHG_USB_SLOW, | |
| EXTCON_DISP_MHL, | |
| EXTCON_JIG, | |
| EXTCON_NONE, | |
| }; | |
| struct max77843_muic_irq { | |
| unsigned int irq; | |
| const char *name; | |
| unsigned int virq; | |
| }; | |
| static struct max77843_muic_irq max77843_muic_irqs[] = { | |
| { MAX77843_MUIC_IRQ_INT1_ADC, "MUIC-ADC" }, | |
| { MAX77843_MUIC_IRQ_INT1_ADCERROR, "MUIC-ADC_ERROR" }, | |
| { MAX77843_MUIC_IRQ_INT1_ADC1K, "MUIC-ADC1K" }, | |
| { MAX77843_MUIC_IRQ_INT2_CHGTYP, "MUIC-CHGTYP" }, | |
| { MAX77843_MUIC_IRQ_INT2_CHGDETRUN, "MUIC-CHGDETRUN" }, | |
| { MAX77843_MUIC_IRQ_INT2_DCDTMR, "MUIC-DCDTMR" }, | |
| { MAX77843_MUIC_IRQ_INT2_DXOVP, "MUIC-DXOVP" }, | |
| { MAX77843_MUIC_IRQ_INT2_VBVOLT, "MUIC-VBVOLT" }, | |
| { MAX77843_MUIC_IRQ_INT3_VBADC, "MUIC-VBADC" }, | |
| { MAX77843_MUIC_IRQ_INT3_VDNMON, "MUIC-VDNMON" }, | |
| { MAX77843_MUIC_IRQ_INT3_DNRES, "MUIC-DNRES" }, | |
| { MAX77843_MUIC_IRQ_INT3_MPNACK, "MUIC-MPNACK"}, | |
| { MAX77843_MUIC_IRQ_INT3_MRXBUFOW, "MUIC-MRXBUFOW"}, | |
| { MAX77843_MUIC_IRQ_INT3_MRXTRF, "MUIC-MRXTRF"}, | |
| { MAX77843_MUIC_IRQ_INT3_MRXPERR, "MUIC-MRXPERR"}, | |
| { MAX77843_MUIC_IRQ_INT3_MRXRDY, "MUIC-MRXRDY"}, | |
| }; | |
| static const struct regmap_config max77843_muic_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = MAX77843_MUIC_REG_END, | |
| }; | |
| static const struct regmap_irq max77843_muic_irq[] = { | |
| /* INT1 interrupt */ | |
| { .reg_offset = 0, .mask = MAX77843_MUIC_ADC, }, | |
| { .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, }, | |
| { .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, }, | |
| /* INT2 interrupt */ | |
| { .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, }, | |
| { .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, }, | |
| { .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, }, | |
| { .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, }, | |
| { .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, }, | |
| /* INT3 interrupt */ | |
| { .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, }, | |
| { .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, }, | |
| { .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, }, | |
| { .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, }, | |
| { .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, }, | |
| { .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, }, | |
| { .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, }, | |
| { .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, }, | |
| }; | |
| static const struct regmap_irq_chip max77843_muic_irq_chip = { | |
| .name = "max77843-muic", | |
| .status_base = MAX77843_MUIC_REG_INT1, | |
| .mask_base = MAX77843_MUIC_REG_INTMASK1, | |
| .mask_invert = true, | |
| .num_regs = 3, | |
| .irqs = max77843_muic_irq, | |
| .num_irqs = ARRAY_SIZE(max77843_muic_irq), | |
| }; | |
| static int max77843_muic_set_path(struct max77843_muic_info *info, | |
| u8 val, bool attached) | |
| { | |
| struct max77693_dev *max77843 = info->max77843; | |
| int ret = 0; | |
| unsigned int ctrl1, ctrl2; | |
| if (attached) | |
| ctrl1 = val; | |
| else | |
| ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN; | |
| ret = regmap_update_bits(max77843->regmap_muic, | |
| MAX77843_MUIC_REG_CONTROL1, | |
| MAX77843_MUIC_CONTROL1_COM_SW, ctrl1); | |
| if (ret < 0) { | |
| dev_err(info->dev, "Cannot switch MUIC port\n"); | |
| return ret; | |
| } | |
| if (attached) | |
| ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK; | |
| else | |
| ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK; | |
| ret = regmap_update_bits(max77843->regmap_muic, | |
| MAX77843_MUIC_REG_CONTROL2, | |
| MAX77843_MUIC_CONTROL2_LOWPWR_MASK | | |
| MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2); | |
| if (ret < 0) { | |
| dev_err(info->dev, "Cannot update lowpower mode\n"); | |
| return ret; | |
| } | |
| dev_dbg(info->dev, | |
| "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", | |
| ctrl1, ctrl2, attached ? "attached" : "detached"); | |
| return 0; | |
| } | |
| static int max77843_muic_get_cable_type(struct max77843_muic_info *info, | |
| enum max77843_muic_cable_group group, bool *attached) | |
| { | |
| int adc, chg_type, cable_type, gnd_type; | |
| adc = info->status[MAX77843_MUIC_STATUS1] & | |
| MAX77843_MUIC_STATUS1_ADC_MASK; | |
| adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT; | |
| switch (group) { | |
| case MAX77843_CABLE_GROUP_ADC: | |
| if (adc == MAX77843_MUIC_ADC_OPEN) { | |
| *attached = false; | |
| cable_type = info->prev_cable_type; | |
| info->prev_cable_type = MAX77843_MUIC_ADC_OPEN; | |
| } else { | |
| *attached = true; | |
| cable_type = info->prev_cable_type = adc; | |
| } | |
| break; | |
| case MAX77843_CABLE_GROUP_CHG: | |
| chg_type = info->status[MAX77843_MUIC_STATUS2] & | |
| MAX77843_MUIC_STATUS2_CHGTYP_MASK; | |
| /* Check GROUND accessory with charger cable */ | |
| if (adc == MAX77843_MUIC_ADC_GROUND) { | |
| if (chg_type == MAX77843_MUIC_CHG_NONE) { | |
| /* The following state when charger cable is | |
| * disconnected but the GROUND accessory still | |
| * connected */ | |
| *attached = false; | |
| cable_type = info->prev_chg_type; | |
| info->prev_chg_type = MAX77843_MUIC_CHG_NONE; | |
| } else { | |
| /* The following state when charger cable is | |
| * connected on the GROUND accessory */ | |
| *attached = true; | |
| cable_type = MAX77843_MUIC_CHG_GND; | |
| info->prev_chg_type = MAX77843_MUIC_CHG_GND; | |
| } | |
| break; | |
| } | |
| if (chg_type == MAX77843_MUIC_CHG_NONE) { | |
| *attached = false; | |
| cable_type = info->prev_chg_type; | |
| info->prev_chg_type = MAX77843_MUIC_CHG_NONE; | |
| } else { | |
| *attached = true; | |
| cable_type = info->prev_chg_type = chg_type; | |
| } | |
| break; | |
| case MAX77843_CABLE_GROUP_ADC_GND: | |
| if (adc == MAX77843_MUIC_ADC_OPEN) { | |
| *attached = false; | |
| cable_type = info->prev_gnd_type; | |
| info->prev_gnd_type = MAX77843_MUIC_ADC_OPEN; | |
| } else { | |
| *attached = true; | |
| /* Offset|ADC1K|VBVolt| | |
| * 0x1| 0| 0| USB-HOST | |
| * 0x1| 0| 1| USB-HOST with VB | |
| * 0x1| 1| 0| MHL | |
| * 0x1| 1| 1| MHL with VB */ | |
| /* Get ADC1K register bit */ | |
| gnd_type = (info->status[MAX77843_MUIC_STATUS1] & | |
| MAX77843_MUIC_STATUS1_ADC1K_MASK); | |
| /* Get VBVolt register bit */ | |
| gnd_type |= (info->status[MAX77843_MUIC_STATUS2] & | |
| MAX77843_MUIC_STATUS2_VBVOLT_MASK); | |
| gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT; | |
| /* Offset of GND cable */ | |
| gnd_type |= MAX77843_MUIC_GND_USB_HOST; | |
| cable_type = info->prev_gnd_type = gnd_type; | |
| } | |
| break; | |
| default: | |
| dev_err(info->dev, "Unknown cable group (%d)\n", group); | |
| cable_type = -EINVAL; | |
| break; | |
| } | |
| return cable_type; | |
| } | |
| static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) | |
| { | |
| int ret, gnd_cable_type; | |
| bool attached; | |
| gnd_cable_type = max77843_muic_get_cable_type(info, | |
| MAX77843_CABLE_GROUP_ADC_GND, &attached); | |
| dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n", | |
| attached ? "attached" : "detached", gnd_cable_type); | |
| switch (gnd_cable_type) { | |
| case MAX77843_MUIC_GND_USB_HOST: | |
| case MAX77843_MUIC_GND_USB_HOST_VB: | |
| ret = max77843_muic_set_path(info, | |
| MAX77843_MUIC_CONTROL1_SW_USB, | |
| attached); | |
| if (ret < 0) | |
| return ret; | |
| extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); | |
| break; | |
| case MAX77843_MUIC_GND_MHL_VB: | |
| case MAX77843_MUIC_GND_MHL: | |
| ret = max77843_muic_set_path(info, | |
| MAX77843_MUIC_CONTROL1_SW_OPEN, | |
| attached); | |
| if (ret < 0) | |
| return ret; | |
| extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); | |
| break; | |
| default: | |
| dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n", | |
| attached ? "attached" : "detached", gnd_cable_type); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int max77843_muic_jig_handler(struct max77843_muic_info *info, | |
| int cable_type, bool attached) | |
| { | |
| int ret; | |
| u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN; | |
| dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n", | |
| attached ? "attached" : "detached", cable_type); | |
| switch (cable_type) { | |
| case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF: | |
| case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON: | |
| path = MAX77843_MUIC_CONTROL1_SW_USB; | |
| break; | |
| case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF: | |
| path = MAX77843_MUIC_CONTROL1_SW_UART; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| ret = max77843_muic_set_path(info, path, attached); | |
| if (ret < 0) | |
| return ret; | |
| extcon_set_state_sync(info->edev, EXTCON_JIG, attached); | |
| return 0; | |
| } | |
| static int max77843_muic_adc_handler(struct max77843_muic_info *info) | |
| { | |
| int ret, cable_type; | |
| bool attached; | |
| cable_type = max77843_muic_get_cable_type(info, | |
| MAX77843_CABLE_GROUP_ADC, &attached); | |
| dev_dbg(info->dev, | |
| "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n", | |
| attached ? "attached" : "detached", cable_type, | |
| info->prev_cable_type); | |
| switch (cable_type) { | |
| case MAX77843_MUIC_ADC_GROUND: | |
| ret = max77843_muic_adc_gnd_handler(info); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF: | |
| case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON: | |
| case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF: | |
| ret = max77843_muic_jig_handler(info, cable_type, attached); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| case MAX77843_MUIC_ADC_SEND_END_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON: | |
| case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON: | |
| case MAX77843_MUIC_ADC_RESERVED_ACC_1: | |
| case MAX77843_MUIC_ADC_RESERVED_ACC_2: | |
| case MAX77843_MUIC_ADC_RESERVED_ACC_3: | |
| case MAX77843_MUIC_ADC_RESERVED_ACC_4: | |
| case MAX77843_MUIC_ADC_RESERVED_ACC_5: | |
| case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2: | |
| case MAX77843_MUIC_ADC_PHONE_POWERED_DEV: | |
| case MAX77843_MUIC_ADC_TTY_CONVERTER: | |
| case MAX77843_MUIC_ADC_UART_CABLE: | |
| case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG: | |
| case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD: | |
| case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG: | |
| case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON: | |
| case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1: | |
| case MAX77843_MUIC_ADC_OPEN: | |
| dev_err(info->dev, | |
| "accessory is %s but it isn't used (adc:0x%x)\n", | |
| attached ? "attached" : "detached", cable_type); | |
| return -EAGAIN; | |
| default: | |
| dev_err(info->dev, | |
| "failed to detect %s accessory (adc:0x%x)\n", | |
| attached ? "attached" : "detached", cable_type); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int max77843_muic_chg_handler(struct max77843_muic_info *info) | |
| { | |
| int ret, chg_type, gnd_type; | |
| bool attached; | |
| chg_type = max77843_muic_get_cable_type(info, | |
| MAX77843_CABLE_GROUP_CHG, &attached); | |
| dev_dbg(info->dev, | |
| "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n", | |
| attached ? "attached" : "detached", | |
| chg_type, info->prev_chg_type); | |
| switch (chg_type) { | |
| case MAX77843_MUIC_CHG_USB: | |
| ret = max77843_muic_set_path(info, | |
| MAX77843_MUIC_CONTROL1_SW_USB, | |
| attached); | |
| if (ret < 0) | |
| return ret; | |
| extcon_set_state_sync(info->edev, EXTCON_USB, attached); | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, | |
| attached); | |
| break; | |
| case MAX77843_MUIC_CHG_DOWNSTREAM: | |
| ret = max77843_muic_set_path(info, | |
| MAX77843_MUIC_CONTROL1_SW_OPEN, | |
| attached); | |
| if (ret < 0) | |
| return ret; | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP, | |
| attached); | |
| break; | |
| case MAX77843_MUIC_CHG_DEDICATED: | |
| ret = max77843_muic_set_path(info, | |
| MAX77843_MUIC_CONTROL1_SW_OPEN, | |
| attached); | |
| if (ret < 0) | |
| return ret; | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, | |
| attached); | |
| break; | |
| case MAX77843_MUIC_CHG_SPECIAL_500MA: | |
| ret = max77843_muic_set_path(info, | |
| MAX77843_MUIC_CONTROL1_SW_OPEN, | |
| attached); | |
| if (ret < 0) | |
| return ret; | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW, | |
| attached); | |
| break; | |
| case MAX77843_MUIC_CHG_SPECIAL_1A: | |
| ret = max77843_muic_set_path(info, | |
| MAX77843_MUIC_CONTROL1_SW_OPEN, | |
| attached); | |
| if (ret < 0) | |
| return ret; | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST, | |
| attached); | |
| break; | |
| case MAX77843_MUIC_CHG_GND: | |
| gnd_type = max77843_muic_get_cable_type(info, | |
| MAX77843_CABLE_GROUP_ADC_GND, &attached); | |
| /* Charger cable on MHL accessory is attach or detach */ | |
| if (gnd_type == MAX77843_MUIC_GND_MHL_VB) | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, | |
| true); | |
| else if (gnd_type == MAX77843_MUIC_GND_MHL) | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, | |
| false); | |
| break; | |
| case MAX77843_MUIC_CHG_NONE: | |
| break; | |
| default: | |
| dev_err(info->dev, | |
| "failed to detect %s accessory (chg_type:0x%x)\n", | |
| attached ? "attached" : "detached", chg_type); | |
| max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, | |
| attached); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static void max77843_muic_irq_work(struct work_struct *work) | |
| { | |
| struct max77843_muic_info *info = container_of(work, | |
| struct max77843_muic_info, irq_work); | |
| struct max77693_dev *max77843 = info->max77843; | |
| int ret = 0; | |
| mutex_lock(&info->mutex); | |
| ret = regmap_bulk_read(max77843->regmap_muic, | |
| MAX77843_MUIC_REG_STATUS1, info->status, | |
| MAX77843_MUIC_STATUS_NUM); | |
| if (ret) { | |
| dev_err(info->dev, "Cannot read STATUS registers\n"); | |
| mutex_unlock(&info->mutex); | |
| return; | |
| } | |
| if (info->irq_adc) { | |
| ret = max77843_muic_adc_handler(info); | |
| if (ret) | |
| dev_err(info->dev, "Unknown cable type\n"); | |
| info->irq_adc = false; | |
| } | |
| if (info->irq_chg) { | |
| ret = max77843_muic_chg_handler(info); | |
| if (ret) | |
| dev_err(info->dev, "Unknown charger type\n"); | |
| info->irq_chg = false; | |
| } | |
| mutex_unlock(&info->mutex); | |
| } | |
| static irqreturn_t max77843_muic_irq_handler(int irq, void *data) | |
| { | |
| struct max77843_muic_info *info = data; | |
| int i, irq_type = -1; | |
| for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) | |
| if (irq == max77843_muic_irqs[i].virq) | |
| irq_type = max77843_muic_irqs[i].irq; | |
| switch (irq_type) { | |
| case MAX77843_MUIC_IRQ_INT1_ADC: | |
| case MAX77843_MUIC_IRQ_INT1_ADCERROR: | |
| case MAX77843_MUIC_IRQ_INT1_ADC1K: | |
| info->irq_adc = true; | |
| break; | |
| case MAX77843_MUIC_IRQ_INT2_CHGTYP: | |
| case MAX77843_MUIC_IRQ_INT2_CHGDETRUN: | |
| case MAX77843_MUIC_IRQ_INT2_DCDTMR: | |
| case MAX77843_MUIC_IRQ_INT2_DXOVP: | |
| case MAX77843_MUIC_IRQ_INT2_VBVOLT: | |
| info->irq_chg = true; | |
| break; | |
| case MAX77843_MUIC_IRQ_INT3_VBADC: | |
| case MAX77843_MUIC_IRQ_INT3_VDNMON: | |
| case MAX77843_MUIC_IRQ_INT3_DNRES: | |
| case MAX77843_MUIC_IRQ_INT3_MPNACK: | |
| case MAX77843_MUIC_IRQ_INT3_MRXBUFOW: | |
| case MAX77843_MUIC_IRQ_INT3_MRXTRF: | |
| case MAX77843_MUIC_IRQ_INT3_MRXPERR: | |
| case MAX77843_MUIC_IRQ_INT3_MRXRDY: | |
| break; | |
| default: | |
| dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type); | |
| break; | |
| } | |
| schedule_work(&info->irq_work); | |
| return IRQ_HANDLED; | |
| } | |
| static void max77843_muic_detect_cable_wq(struct work_struct *work) | |
| { | |
| struct max77843_muic_info *info = container_of(to_delayed_work(work), | |
| struct max77843_muic_info, wq_detcable); | |
| struct max77693_dev *max77843 = info->max77843; | |
| int chg_type, adc, ret; | |
| bool attached; | |
| mutex_lock(&info->mutex); | |
| ret = regmap_bulk_read(max77843->regmap_muic, | |
| MAX77843_MUIC_REG_STATUS1, info->status, | |
| MAX77843_MUIC_STATUS_NUM); | |
| if (ret) { | |
| dev_err(info->dev, "Cannot read STATUS registers\n"); | |
| goto err_cable_wq; | |
| } | |
| adc = max77843_muic_get_cable_type(info, | |
| MAX77843_CABLE_GROUP_ADC, &attached); | |
| if (attached && adc != MAX77843_MUIC_ADC_OPEN) { | |
| ret = max77843_muic_adc_handler(info); | |
| if (ret < 0) { | |
| dev_err(info->dev, "Cannot detect accessory\n"); | |
| goto err_cable_wq; | |
| } | |
| } | |
| chg_type = max77843_muic_get_cable_type(info, | |
| MAX77843_CABLE_GROUP_CHG, &attached); | |
| if (attached && chg_type != MAX77843_MUIC_CHG_NONE) { | |
| ret = max77843_muic_chg_handler(info); | |
| if (ret < 0) { | |
| dev_err(info->dev, "Cannot detect charger accessory\n"); | |
| goto err_cable_wq; | |
| } | |
| } | |
| err_cable_wq: | |
| mutex_unlock(&info->mutex); | |
| } | |
| static int max77843_muic_set_debounce_time(struct max77843_muic_info *info, | |
| enum max77843_muic_adc_debounce_time time) | |
| { | |
| struct max77693_dev *max77843 = info->max77843; | |
| int ret; | |
| switch (time) { | |
| case MAX77843_DEBOUNCE_TIME_5MS: | |
| case MAX77843_DEBOUNCE_TIME_10MS: | |
| case MAX77843_DEBOUNCE_TIME_25MS: | |
| case MAX77843_DEBOUNCE_TIME_38_62MS: | |
| ret = regmap_update_bits(max77843->regmap_muic, | |
| MAX77843_MUIC_REG_CONTROL4, | |
| MAX77843_MUIC_CONTROL4_ADCDBSET_MASK, | |
| time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT); | |
| if (ret < 0) { | |
| dev_err(info->dev, "Cannot write MUIC regmap\n"); | |
| return ret; | |
| } | |
| break; | |
| default: | |
| dev_err(info->dev, "Invalid ADC debounce time\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int max77843_init_muic_regmap(struct max77693_dev *max77843) | |
| { | |
| int ret; | |
| max77843->i2c_muic = i2c_new_dummy(max77843->i2c->adapter, | |
| I2C_ADDR_MUIC); | |
| if (!max77843->i2c_muic) { | |
| dev_err(&max77843->i2c->dev, | |
| "Cannot allocate I2C device for MUIC\n"); | |
| return -ENOMEM; | |
| } | |
| i2c_set_clientdata(max77843->i2c_muic, max77843); | |
| max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic, | |
| &max77843_muic_regmap_config); | |
| if (IS_ERR(max77843->regmap_muic)) { | |
| ret = PTR_ERR(max77843->regmap_muic); | |
| goto err_muic_i2c; | |
| } | |
| ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq, | |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED, | |
| 0, &max77843_muic_irq_chip, &max77843->irq_data_muic); | |
| if (ret < 0) { | |
| dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n"); | |
| goto err_muic_i2c; | |
| } | |
| return 0; | |
| err_muic_i2c: | |
| i2c_unregister_device(max77843->i2c_muic); | |
| return ret; | |
| } | |
| static int max77843_muic_probe(struct platform_device *pdev) | |
| { | |
| struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent); | |
| struct max77843_muic_info *info; | |
| unsigned int id; | |
| int i, ret; | |
| info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); | |
| if (!info) | |
| return -ENOMEM; | |
| info->dev = &pdev->dev; | |
| info->max77843 = max77843; | |
| platform_set_drvdata(pdev, info); | |
| mutex_init(&info->mutex); | |
| /* Initialize i2c and regmap */ | |
| ret = max77843_init_muic_regmap(max77843); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to init MUIC regmap\n"); | |
| return ret; | |
| } | |
| /* Turn off auto detection configuration */ | |
| ret = regmap_update_bits(max77843->regmap_muic, | |
| MAX77843_MUIC_REG_CONTROL4, | |
| MAX77843_MUIC_CONTROL4_USBAUTO_MASK | | |
| MAX77843_MUIC_CONTROL4_FCTAUTO_MASK, | |
| CONTROL4_AUTO_DISABLE); | |
| /* Initialize extcon device */ | |
| info->edev = devm_extcon_dev_allocate(&pdev->dev, | |
| max77843_extcon_cable); | |
| if (IS_ERR(info->edev)) { | |
| dev_err(&pdev->dev, "Failed to allocate memory for extcon\n"); | |
| ret = -ENODEV; | |
| goto err_muic_irq; | |
| } | |
| ret = devm_extcon_dev_register(&pdev->dev, info->edev); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to register extcon device\n"); | |
| goto err_muic_irq; | |
| } | |
| /* Set ADC debounce time */ | |
| max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS); | |
| /* Set initial path for UART */ | |
| max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true); | |
| /* Check revision number of MUIC device */ | |
| ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "Failed to read revision number\n"); | |
| goto err_muic_irq; | |
| } | |
| dev_info(info->dev, "MUIC device ID : 0x%x\n", id); | |
| /* Support virtual irq domain for max77843 MUIC device */ | |
| INIT_WORK(&info->irq_work, max77843_muic_irq_work); | |
| /* Clear IRQ bits before request IRQs */ | |
| ret = regmap_bulk_read(max77843->regmap_muic, | |
| MAX77843_MUIC_REG_INT1, info->status, | |
| MAX77843_MUIC_STATUS_NUM); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to Clear IRQ bits\n"); | |
| goto err_muic_irq; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) { | |
| struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i]; | |
| int virq = 0; | |
| virq = regmap_irq_get_virq(max77843->irq_data_muic, | |
| muic_irq->irq); | |
| if (virq <= 0) { | |
| ret = -EINVAL; | |
| goto err_muic_irq; | |
| } | |
| muic_irq->virq = virq; | |
| ret = devm_request_threaded_irq(&pdev->dev, virq, NULL, | |
| max77843_muic_irq_handler, IRQF_NO_SUSPEND, | |
| muic_irq->name, info); | |
| if (ret) { | |
| dev_err(&pdev->dev, | |
| "Failed to request irq (IRQ: %d, error: %d)\n", | |
| muic_irq->irq, ret); | |
| goto err_muic_irq; | |
| } | |
| } | |
| /* Detect accessory after completing the initialization of platform */ | |
| INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq); | |
| queue_delayed_work(system_power_efficient_wq, | |
| &info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT)); | |
| return 0; | |
| err_muic_irq: | |
| regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic); | |
| i2c_unregister_device(max77843->i2c_muic); | |
| return ret; | |
| } | |
| static int max77843_muic_remove(struct platform_device *pdev) | |
| { | |
| struct max77843_muic_info *info = platform_get_drvdata(pdev); | |
| struct max77693_dev *max77843 = info->max77843; | |
| cancel_work_sync(&info->irq_work); | |
| regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic); | |
| i2c_unregister_device(max77843->i2c_muic); | |
| return 0; | |
| } | |
| static const struct platform_device_id max77843_muic_id[] = { | |
| { "max77843-muic", }, | |
| { /* sentinel */ }, | |
| }; | |
| MODULE_DEVICE_TABLE(platform, max77843_muic_id); | |
| static struct platform_driver max77843_muic_driver = { | |
| .driver = { | |
| .name = "max77843-muic", | |
| }, | |
| .probe = max77843_muic_probe, | |
| .remove = max77843_muic_remove, | |
| .id_table = max77843_muic_id, | |
| }; | |
| static int __init max77843_muic_init(void) | |
| { | |
| return platform_driver_register(&max77843_muic_driver); | |
| } | |
| subsys_initcall(max77843_muic_init); | |
| MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver"); | |
| MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>"); | |
| MODULE_LICENSE("GPL"); |