| /* | |
| * 74Hx164 - Generic serial-in/parallel-out 8-bits shift register GPIO driver | |
| * | |
| * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> | |
| * Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/mutex.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/gpio.h> | |
| #include <linux/of_gpio.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #define GEN_74X164_NUMBER_GPIOS 8 | |
| struct gen_74x164_chip { | |
| struct gpio_chip gpio_chip; | |
| struct mutex lock; | |
| u32 registers; | |
| /* | |
| * Since the registers are chained, every byte sent will make | |
| * the previous byte shift to the next register in the | |
| * chain. Thus, the first byte sent will end up in the last | |
| * register at the end of the transfer. So, to have a logical | |
| * numbering, store the bytes in reverse order. | |
| */ | |
| u8 buffer[0]; | |
| }; | |
| static int __gen_74x164_write_config(struct gen_74x164_chip *chip) | |
| { | |
| return spi_write(to_spi_device(chip->gpio_chip.parent), chip->buffer, | |
| chip->registers); | |
| } | |
| static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset) | |
| { | |
| struct gen_74x164_chip *chip = gpiochip_get_data(gc); | |
| u8 bank = chip->registers - 1 - offset / 8; | |
| u8 pin = offset % 8; | |
| int ret; | |
| mutex_lock(&chip->lock); | |
| ret = (chip->buffer[bank] >> pin) & 0x1; | |
| mutex_unlock(&chip->lock); | |
| return ret; | |
| } | |
| static void gen_74x164_set_value(struct gpio_chip *gc, | |
| unsigned offset, int val) | |
| { | |
| struct gen_74x164_chip *chip = gpiochip_get_data(gc); | |
| u8 bank = chip->registers - 1 - offset / 8; | |
| u8 pin = offset % 8; | |
| mutex_lock(&chip->lock); | |
| if (val) | |
| chip->buffer[bank] |= (1 << pin); | |
| else | |
| chip->buffer[bank] &= ~(1 << pin); | |
| __gen_74x164_write_config(chip); | |
| mutex_unlock(&chip->lock); | |
| } | |
| static void gen_74x164_set_multiple(struct gpio_chip *gc, unsigned long *mask, | |
| unsigned long *bits) | |
| { | |
| struct gen_74x164_chip *chip = gpiochip_get_data(gc); | |
| unsigned int i, idx, shift; | |
| u8 bank, bankmask; | |
| mutex_lock(&chip->lock); | |
| for (i = 0, bank = chip->registers - 1; i < chip->registers; | |
| i++, bank--) { | |
| idx = i / sizeof(*mask); | |
| shift = i % sizeof(*mask) * BITS_PER_BYTE; | |
| bankmask = mask[idx] >> shift; | |
| if (!bankmask) | |
| continue; | |
| chip->buffer[bank] &= ~bankmask; | |
| chip->buffer[bank] |= bankmask & (bits[idx] >> shift); | |
| } | |
| __gen_74x164_write_config(chip); | |
| mutex_unlock(&chip->lock); | |
| } | |
| static int gen_74x164_direction_output(struct gpio_chip *gc, | |
| unsigned offset, int val) | |
| { | |
| gen_74x164_set_value(gc, offset, val); | |
| return 0; | |
| } | |
| static int gen_74x164_probe(struct spi_device *spi) | |
| { | |
| struct gen_74x164_chip *chip; | |
| u32 nregs; | |
| int ret; | |
| /* | |
| * bits_per_word cannot be configured in platform data | |
| */ | |
| spi->bits_per_word = 8; | |
| ret = spi_setup(spi); | |
| if (ret < 0) | |
| return ret; | |
| if (of_property_read_u32(spi->dev.of_node, "registers-number", | |
| &nregs)) { | |
| dev_err(&spi->dev, | |
| "Missing registers-number property in the DT.\n"); | |
| return -EINVAL; | |
| } | |
| chip = devm_kzalloc(&spi->dev, sizeof(*chip) + nregs, GFP_KERNEL); | |
| if (!chip) | |
| return -ENOMEM; | |
| spi_set_drvdata(spi, chip); | |
| chip->gpio_chip.label = spi->modalias; | |
| chip->gpio_chip.direction_output = gen_74x164_direction_output; | |
| chip->gpio_chip.get = gen_74x164_get_value; | |
| chip->gpio_chip.set = gen_74x164_set_value; | |
| chip->gpio_chip.set_multiple = gen_74x164_set_multiple; | |
| chip->gpio_chip.base = -1; | |
| chip->registers = nregs; | |
| chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers; | |
| chip->gpio_chip.can_sleep = true; | |
| chip->gpio_chip.parent = &spi->dev; | |
| chip->gpio_chip.owner = THIS_MODULE; | |
| mutex_init(&chip->lock); | |
| ret = __gen_74x164_write_config(chip); | |
| if (ret) { | |
| dev_err(&spi->dev, "Failed writing: %d\n", ret); | |
| goto exit_destroy; | |
| } | |
| ret = gpiochip_add_data(&chip->gpio_chip, chip); | |
| if (!ret) | |
| return 0; | |
| exit_destroy: | |
| mutex_destroy(&chip->lock); | |
| return ret; | |
| } | |
| static int gen_74x164_remove(struct spi_device *spi) | |
| { | |
| struct gen_74x164_chip *chip = spi_get_drvdata(spi); | |
| gpiochip_remove(&chip->gpio_chip); | |
| mutex_destroy(&chip->lock); | |
| return 0; | |
| } | |
| static const struct of_device_id gen_74x164_dt_ids[] = { | |
| { .compatible = "fairchild,74hc595" }, | |
| { .compatible = "nxp,74lvc594" }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids); | |
| static struct spi_driver gen_74x164_driver = { | |
| .driver = { | |
| .name = "74x164", | |
| .of_match_table = gen_74x164_dt_ids, | |
| }, | |
| .probe = gen_74x164_probe, | |
| .remove = gen_74x164_remove, | |
| }; | |
| module_spi_driver(gen_74x164_driver); | |
| MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); | |
| MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>"); | |
| MODULE_DESCRIPTION("GPIO expander driver for 74X164 8-bits shift register"); | |
| MODULE_LICENSE("GPL v2"); |