| /* | |
| * GPIO driver for AMD 8111 south bridges | |
| * | |
| * Copyright (c) 2012 Dmitry Eremin-Solenikov | |
| * | |
| * Based on the AMD RNG driver: | |
| * Copyright 2005 (c) MontaVista Software, Inc. | |
| * with the majority of the code coming from: | |
| * | |
| * Hardware driver for the Intel/AMD/VIA Random Number Generators (RNG) | |
| * (c) Copyright 2003 Red Hat Inc <jgarzik@redhat.com> | |
| * | |
| * derived from | |
| * | |
| * Hardware driver for the AMD 768 Random Number Generator (RNG) | |
| * (c) Copyright 2001 Red Hat Inc | |
| * | |
| * derived from | |
| * | |
| * Hardware driver for Intel i810 Random Number Generator (RNG) | |
| * Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com> | |
| * Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com> | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/ioport.h> | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/gpio.h> | |
| #include <linux/pci.h> | |
| #include <linux/spinlock.h> | |
| #define PMBASE_OFFSET 0xb0 | |
| #define PMBASE_SIZE 0x30 | |
| #define AMD_REG_GPIO(i) (0x10 + (i)) | |
| #define AMD_GPIO_LTCH_STS 0x40 /* Latch status, w1 */ | |
| #define AMD_GPIO_RTIN 0x20 /* Real Time in, ro */ | |
| #define AMD_GPIO_DEBOUNCE 0x10 /* Debounce, rw */ | |
| #define AMD_GPIO_MODE_MASK 0x0c /* Pin Mode Select, rw */ | |
| #define AMD_GPIO_MODE_IN 0x00 | |
| #define AMD_GPIO_MODE_OUT 0x04 | |
| /* Enable alternative (e.g. clkout, IRQ, etc) function of the pin */ | |
| #define AMD_GPIO_MODE_ALTFN 0x08 /* Or 0x09 */ | |
| #define AMD_GPIO_X_MASK 0x03 /* In/Out specific, rw */ | |
| #define AMD_GPIO_X_IN_ACTIVEHI 0x01 /* Active High */ | |
| #define AMD_GPIO_X_IN_LATCH 0x02 /* Latched version is selected */ | |
| #define AMD_GPIO_X_OUT_LOW 0x00 | |
| #define AMD_GPIO_X_OUT_HI 0x01 | |
| #define AMD_GPIO_X_OUT_CLK0 0x02 | |
| #define AMD_GPIO_X_OUT_CLK1 0x03 | |
| /* | |
| * Data for PCI driver interface | |
| * | |
| * This data only exists for exporting the supported | |
| * PCI ids via MODULE_DEVICE_TABLE. We do not actually | |
| * register a pci_driver, because someone else might one day | |
| * want to register another driver on the same PCI id. | |
| */ | |
| static const struct pci_device_id pci_tbl[] = { | |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS), 0 }, | |
| { 0, }, /* terminate list */ | |
| }; | |
| MODULE_DEVICE_TABLE(pci, pci_tbl); | |
| struct amd_gpio { | |
| struct gpio_chip chip; | |
| u32 pmbase; | |
| void __iomem *pm; | |
| struct pci_dev *pdev; | |
| spinlock_t lock; /* guards hw registers and orig table */ | |
| u8 orig[32]; | |
| }; | |
| static int amd_gpio_request(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct amd_gpio *agp = gpiochip_get_data(chip); | |
| agp->orig[offset] = ioread8(agp->pm + AMD_REG_GPIO(offset)) & | |
| (AMD_GPIO_DEBOUNCE | AMD_GPIO_MODE_MASK | AMD_GPIO_X_MASK); | |
| dev_dbg(&agp->pdev->dev, "Requested gpio %d, data %x\n", offset, agp->orig[offset]); | |
| return 0; | |
| } | |
| static void amd_gpio_free(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct amd_gpio *agp = gpiochip_get_data(chip); | |
| dev_dbg(&agp->pdev->dev, "Freed gpio %d, data %x\n", offset, agp->orig[offset]); | |
| iowrite8(agp->orig[offset], agp->pm + AMD_REG_GPIO(offset)); | |
| } | |
| static void amd_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| struct amd_gpio *agp = gpiochip_get_data(chip); | |
| u8 temp; | |
| unsigned long flags; | |
| spin_lock_irqsave(&agp->lock, flags); | |
| temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); | |
| temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW); | |
| iowrite8(temp, agp->pm + AMD_REG_GPIO(offset)); | |
| spin_unlock_irqrestore(&agp->lock, flags); | |
| dev_dbg(&agp->pdev->dev, "Setting gpio %d, value %d, reg=%02x\n", offset, !!value, temp); | |
| } | |
| static int amd_gpio_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct amd_gpio *agp = gpiochip_get_data(chip); | |
| u8 temp; | |
| temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); | |
| dev_dbg(&agp->pdev->dev, "Getting gpio %d, reg=%02x\n", offset, temp); | |
| return (temp & AMD_GPIO_RTIN) ? 1 : 0; | |
| } | |
| static int amd_gpio_dirout(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| struct amd_gpio *agp = gpiochip_get_data(chip); | |
| u8 temp; | |
| unsigned long flags; | |
| spin_lock_irqsave(&agp->lock, flags); | |
| temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); | |
| temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW); | |
| iowrite8(temp, agp->pm + AMD_REG_GPIO(offset)); | |
| spin_unlock_irqrestore(&agp->lock, flags); | |
| dev_dbg(&agp->pdev->dev, "Dirout gpio %d, value %d, reg=%02x\n", offset, !!value, temp); | |
| return 0; | |
| } | |
| static int amd_gpio_dirin(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct amd_gpio *agp = gpiochip_get_data(chip); | |
| u8 temp; | |
| unsigned long flags; | |
| spin_lock_irqsave(&agp->lock, flags); | |
| temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); | |
| temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_IN; | |
| iowrite8(temp, agp->pm + AMD_REG_GPIO(offset)); | |
| spin_unlock_irqrestore(&agp->lock, flags); | |
| dev_dbg(&agp->pdev->dev, "Dirin gpio %d, reg=%02x\n", offset, temp); | |
| return 0; | |
| } | |
| static struct amd_gpio gp = { | |
| .chip = { | |
| .label = "AMD GPIO", | |
| .owner = THIS_MODULE, | |
| .base = -1, | |
| .ngpio = 32, | |
| .request = amd_gpio_request, | |
| .free = amd_gpio_free, | |
| .set = amd_gpio_set, | |
| .get = amd_gpio_get, | |
| .direction_output = amd_gpio_dirout, | |
| .direction_input = amd_gpio_dirin, | |
| }, | |
| }; | |
| static int __init amd_gpio_init(void) | |
| { | |
| int err = -ENODEV; | |
| struct pci_dev *pdev = NULL; | |
| const struct pci_device_id *ent; | |
| /* We look for our device - AMD South Bridge | |
| * I don't know about a system with two such bridges, | |
| * so we can assume that there is max. one device. | |
| * | |
| * We can't use plain pci_driver mechanism, | |
| * as the device is really a multiple function device, | |
| * main driver that binds to the pci_device is an smbus | |
| * driver and have to find & bind to the device this way. | |
| */ | |
| for_each_pci_dev(pdev) { | |
| ent = pci_match_id(pci_tbl, pdev); | |
| if (ent) | |
| goto found; | |
| } | |
| /* Device not found. */ | |
| goto out; | |
| found: | |
| err = pci_read_config_dword(pdev, 0x58, &gp.pmbase); | |
| if (err) | |
| goto out; | |
| err = -EIO; | |
| gp.pmbase &= 0x0000FF00; | |
| if (gp.pmbase == 0) | |
| goto out; | |
| if (!devm_request_region(&pdev->dev, gp.pmbase + PMBASE_OFFSET, | |
| PMBASE_SIZE, "AMD GPIO")) { | |
| dev_err(&pdev->dev, "AMD GPIO region 0x%x already in use!\n", | |
| gp.pmbase + PMBASE_OFFSET); | |
| err = -EBUSY; | |
| goto out; | |
| } | |
| gp.pm = ioport_map(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE); | |
| if (!gp.pm) { | |
| dev_err(&pdev->dev, "Couldn't map io port into io memory\n"); | |
| err = -ENOMEM; | |
| goto out; | |
| } | |
| gp.pdev = pdev; | |
| gp.chip.parent = &pdev->dev; | |
| spin_lock_init(&gp.lock); | |
| printk(KERN_INFO "AMD-8111 GPIO detected\n"); | |
| err = gpiochip_add_data(&gp.chip, &gp); | |
| if (err) { | |
| printk(KERN_ERR "GPIO registering failed (%d)\n", | |
| err); | |
| ioport_unmap(gp.pm); | |
| goto out; | |
| } | |
| out: | |
| return err; | |
| } | |
| static void __exit amd_gpio_exit(void) | |
| { | |
| gpiochip_remove(&gp.chip); | |
| ioport_unmap(gp.pm); | |
| } | |
| module_init(amd_gpio_init); | |
| module_exit(amd_gpio_exit); | |
| MODULE_AUTHOR("The Linux Kernel team"); | |
| MODULE_DESCRIPTION("GPIO driver for AMD chipsets"); | |
| MODULE_LICENSE("GPL"); |