| /* | |
| * AXP20x GPIO driver | |
| * | |
| * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/device.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mfd/axp20x.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/slab.h> | |
| #define AXP20X_GPIO_FUNCTIONS 0x7 | |
| #define AXP20X_GPIO_FUNCTION_OUT_LOW 0 | |
| #define AXP20X_GPIO_FUNCTION_OUT_HIGH 1 | |
| #define AXP20X_GPIO_FUNCTION_INPUT 2 | |
| struct axp20x_gpio { | |
| struct gpio_chip chip; | |
| struct regmap *regmap; | |
| }; | |
| static int axp20x_gpio_get_reg(unsigned offset) | |
| { | |
| switch (offset) { | |
| case 0: | |
| return AXP20X_GPIO0_CTRL; | |
| case 1: | |
| return AXP20X_GPIO1_CTRL; | |
| case 2: | |
| return AXP20X_GPIO2_CTRL; | |
| } | |
| return -EINVAL; | |
| } | |
| static int axp20x_gpio_input(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct axp20x_gpio *gpio = gpiochip_get_data(chip); | |
| int reg; | |
| reg = axp20x_gpio_get_reg(offset); | |
| if (reg < 0) | |
| return reg; | |
| return regmap_update_bits(gpio->regmap, reg, | |
| AXP20X_GPIO_FUNCTIONS, | |
| AXP20X_GPIO_FUNCTION_INPUT); | |
| } | |
| static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct axp20x_gpio *gpio = gpiochip_get_data(chip); | |
| unsigned int val; | |
| int reg, ret; | |
| reg = axp20x_gpio_get_reg(offset); | |
| if (reg < 0) | |
| return reg; | |
| ret = regmap_read(gpio->regmap, reg, &val); | |
| if (ret) | |
| return ret; | |
| return !!(val & BIT(offset + 4)); | |
| } | |
| static int axp20x_gpio_get_direction(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct axp20x_gpio *gpio = gpiochip_get_data(chip); | |
| unsigned int val; | |
| int reg, ret; | |
| reg = axp20x_gpio_get_reg(offset); | |
| if (reg < 0) | |
| return reg; | |
| ret = regmap_read(gpio->regmap, reg, &val); | |
| if (ret) | |
| return ret; | |
| /* | |
| * This shouldn't really happen if the pin is in use already, | |
| * or if it's not in use yet, it doesn't matter since we're | |
| * going to change the value soon anyway. Default to output. | |
| */ | |
| if ((val & AXP20X_GPIO_FUNCTIONS) > 2) | |
| return 0; | |
| /* | |
| * The GPIO directions are the three lowest values. | |
| * 2 is input, 0 and 1 are output | |
| */ | |
| return val & 2; | |
| } | |
| static int axp20x_gpio_output(struct gpio_chip *chip, unsigned offset, | |
| int value) | |
| { | |
| struct axp20x_gpio *gpio = gpiochip_get_data(chip); | |
| int reg; | |
| reg = axp20x_gpio_get_reg(offset); | |
| if (reg < 0) | |
| return reg; | |
| return regmap_update_bits(gpio->regmap, reg, | |
| AXP20X_GPIO_FUNCTIONS, | |
| value ? AXP20X_GPIO_FUNCTION_OUT_HIGH | |
| : AXP20X_GPIO_FUNCTION_OUT_LOW); | |
| } | |
| static void axp20x_gpio_set(struct gpio_chip *chip, unsigned offset, | |
| int value) | |
| { | |
| axp20x_gpio_output(chip, offset, value); | |
| } | |
| static int axp20x_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); | |
| struct axp20x_gpio *gpio; | |
| int ret; | |
| if (!of_device_is_available(pdev->dev.of_node)) | |
| return -ENODEV; | |
| if (!axp20x) { | |
| dev_err(&pdev->dev, "Parent drvdata not set\n"); | |
| return -EINVAL; | |
| } | |
| gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); | |
| if (!gpio) | |
| return -ENOMEM; | |
| gpio->chip.base = -1; | |
| gpio->chip.can_sleep = true; | |
| gpio->chip.parent = &pdev->dev; | |
| gpio->chip.label = dev_name(&pdev->dev); | |
| gpio->chip.owner = THIS_MODULE; | |
| gpio->chip.get = axp20x_gpio_get; | |
| gpio->chip.get_direction = axp20x_gpio_get_direction; | |
| gpio->chip.set = axp20x_gpio_set; | |
| gpio->chip.direction_input = axp20x_gpio_input; | |
| gpio->chip.direction_output = axp20x_gpio_output; | |
| gpio->chip.ngpio = 3; | |
| gpio->regmap = axp20x->regmap; | |
| ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to register GPIO chip\n"); | |
| return ret; | |
| } | |
| dev_info(&pdev->dev, "AXP209 GPIO driver loaded\n"); | |
| return 0; | |
| } | |
| static const struct of_device_id axp20x_gpio_match[] = { | |
| { .compatible = "x-powers,axp209-gpio" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, axp20x_gpio_match); | |
| static struct platform_driver axp20x_gpio_driver = { | |
| .probe = axp20x_gpio_probe, | |
| .driver = { | |
| .name = "axp20x-gpio", | |
| .of_match_table = axp20x_gpio_match, | |
| }, | |
| }; | |
| module_platform_driver(axp20x_gpio_driver); | |
| MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); | |
| MODULE_DESCRIPTION("AXP20x PMIC GPIO driver"); | |
| MODULE_LICENSE("GPL"); |