| /* | |
| * Copyright (C) 2015 Broadcom Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation version 2. | |
| * | |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any | |
| * kind, whether express or implied; without even the implied warranty | |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/module.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/irqchip/chained_irq.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/reboot.h> | |
| #define GIO_BANK_SIZE 0x20 | |
| #define GIO_ODEN(bank) (((bank) * GIO_BANK_SIZE) + 0x00) | |
| #define GIO_DATA(bank) (((bank) * GIO_BANK_SIZE) + 0x04) | |
| #define GIO_IODIR(bank) (((bank) * GIO_BANK_SIZE) + 0x08) | |
| #define GIO_EC(bank) (((bank) * GIO_BANK_SIZE) + 0x0c) | |
| #define GIO_EI(bank) (((bank) * GIO_BANK_SIZE) + 0x10) | |
| #define GIO_MASK(bank) (((bank) * GIO_BANK_SIZE) + 0x14) | |
| #define GIO_LEVEL(bank) (((bank) * GIO_BANK_SIZE) + 0x18) | |
| #define GIO_STAT(bank) (((bank) * GIO_BANK_SIZE) + 0x1c) | |
| struct brcmstb_gpio_bank { | |
| struct list_head node; | |
| int id; | |
| struct gpio_chip gc; | |
| struct brcmstb_gpio_priv *parent_priv; | |
| u32 width; | |
| struct irq_chip irq_chip; | |
| }; | |
| struct brcmstb_gpio_priv { | |
| struct list_head bank_list; | |
| void __iomem *reg_base; | |
| struct platform_device *pdev; | |
| int parent_irq; | |
| int gpio_base; | |
| bool can_wake; | |
| int parent_wake_irq; | |
| struct notifier_block reboot_notifier; | |
| }; | |
| #define MAX_GPIO_PER_BANK 32 | |
| #define GPIO_BANK(gpio) ((gpio) >> 5) | |
| /* assumes MAX_GPIO_PER_BANK is a multiple of 2 */ | |
| #define GPIO_BIT(gpio) ((gpio) & (MAX_GPIO_PER_BANK - 1)) | |
| static inline struct brcmstb_gpio_priv * | |
| brcmstb_gpio_gc_to_priv(struct gpio_chip *gc) | |
| { | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| return bank->parent_priv; | |
| } | |
| static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank, | |
| unsigned int offset, bool enable) | |
| { | |
| struct gpio_chip *gc = &bank->gc; | |
| struct brcmstb_gpio_priv *priv = bank->parent_priv; | |
| u32 mask = gc->pin2mask(gc, offset); | |
| u32 imask; | |
| unsigned long flags; | |
| spin_lock_irqsave(&gc->bgpio_lock, flags); | |
| imask = gc->read_reg(priv->reg_base + GIO_MASK(bank->id)); | |
| if (enable) | |
| imask |= mask; | |
| else | |
| imask &= ~mask; | |
| gc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask); | |
| spin_unlock_irqrestore(&gc->bgpio_lock, flags); | |
| } | |
| /* -------------------- IRQ chip functions -------------------- */ | |
| static void brcmstb_gpio_irq_mask(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| brcmstb_gpio_set_imask(bank, d->hwirq, false); | |
| } | |
| static void brcmstb_gpio_irq_unmask(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| brcmstb_gpio_set_imask(bank, d->hwirq, true); | |
| } | |
| static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| struct brcmstb_gpio_priv *priv = bank->parent_priv; | |
| u32 mask = BIT(d->hwirq); | |
| u32 edge_insensitive, iedge_insensitive; | |
| u32 edge_config, iedge_config; | |
| u32 level, ilevel; | |
| unsigned long flags; | |
| switch (type) { | |
| case IRQ_TYPE_LEVEL_LOW: | |
| level = 0; | |
| edge_config = 0; | |
| edge_insensitive = 0; | |
| break; | |
| case IRQ_TYPE_LEVEL_HIGH: | |
| level = mask; | |
| edge_config = 0; | |
| edge_insensitive = 0; | |
| break; | |
| case IRQ_TYPE_EDGE_FALLING: | |
| level = 0; | |
| edge_config = 0; | |
| edge_insensitive = 0; | |
| break; | |
| case IRQ_TYPE_EDGE_RISING: | |
| level = 0; | |
| edge_config = mask; | |
| edge_insensitive = 0; | |
| break; | |
| case IRQ_TYPE_EDGE_BOTH: | |
| level = 0; | |
| edge_config = 0; /* don't care, but want known value */ | |
| edge_insensitive = mask; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| spin_lock_irqsave(&bank->gc.bgpio_lock, flags); | |
| iedge_config = bank->gc.read_reg(priv->reg_base + | |
| GIO_EC(bank->id)) & ~mask; | |
| iedge_insensitive = bank->gc.read_reg(priv->reg_base + | |
| GIO_EI(bank->id)) & ~mask; | |
| ilevel = bank->gc.read_reg(priv->reg_base + | |
| GIO_LEVEL(bank->id)) & ~mask; | |
| bank->gc.write_reg(priv->reg_base + GIO_EC(bank->id), | |
| iedge_config | edge_config); | |
| bank->gc.write_reg(priv->reg_base + GIO_EI(bank->id), | |
| iedge_insensitive | edge_insensitive); | |
| bank->gc.write_reg(priv->reg_base + GIO_LEVEL(bank->id), | |
| ilevel | level); | |
| spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags); | |
| return 0; | |
| } | |
| static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv, | |
| unsigned int enable) | |
| { | |
| int ret = 0; | |
| /* | |
| * Only enable wake IRQ once for however many hwirqs can wake | |
| * since they all use the same wake IRQ. Mask will be set | |
| * up appropriately thanks to IRQCHIP_MASK_ON_SUSPEND flag. | |
| */ | |
| if (enable) | |
| ret = enable_irq_wake(priv->parent_wake_irq); | |
| else | |
| ret = disable_irq_wake(priv->parent_wake_irq); | |
| if (ret) | |
| dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n", | |
| enable ? "enable" : "disable"); | |
| return ret; | |
| } | |
| static int brcmstb_gpio_irq_set_wake(struct irq_data *d, unsigned int enable) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc); | |
| return brcmstb_gpio_priv_set_wake(priv, enable); | |
| } | |
| static irqreturn_t brcmstb_gpio_wake_irq_handler(int irq, void *data) | |
| { | |
| struct brcmstb_gpio_priv *priv = data; | |
| if (!priv || irq != priv->parent_wake_irq) | |
| return IRQ_NONE; | |
| pm_wakeup_event(&priv->pdev->dev, 0); | |
| return IRQ_HANDLED; | |
| } | |
| static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank) | |
| { | |
| struct brcmstb_gpio_priv *priv = bank->parent_priv; | |
| struct irq_domain *irq_domain = bank->gc.irqdomain; | |
| void __iomem *reg_base = priv->reg_base; | |
| unsigned long status; | |
| unsigned long flags; | |
| spin_lock_irqsave(&bank->gc.bgpio_lock, flags); | |
| while ((status = bank->gc.read_reg(reg_base + GIO_STAT(bank->id)) & | |
| bank->gc.read_reg(reg_base + GIO_MASK(bank->id)))) { | |
| int bit; | |
| for_each_set_bit(bit, &status, 32) { | |
| u32 stat = bank->gc.read_reg(reg_base + | |
| GIO_STAT(bank->id)); | |
| if (bit >= bank->width) | |
| dev_warn(&priv->pdev->dev, | |
| "IRQ for invalid GPIO (bank=%d, offset=%d)\n", | |
| bank->id, bit); | |
| bank->gc.write_reg(reg_base + GIO_STAT(bank->id), | |
| stat | BIT(bit)); | |
| generic_handle_irq(irq_find_mapping(irq_domain, bit)); | |
| } | |
| } | |
| spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags); | |
| } | |
| /* Each UPG GIO block has one IRQ for all banks */ | |
| static void brcmstb_gpio_irq_handler(struct irq_desc *desc) | |
| { | |
| struct gpio_chip *gc = irq_desc_get_handler_data(desc); | |
| struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc); | |
| struct irq_chip *chip = irq_desc_get_chip(desc); | |
| struct brcmstb_gpio_bank *bank; | |
| /* Interrupts weren't properly cleared during probe */ | |
| BUG_ON(!priv || !chip); | |
| chained_irq_enter(chip, desc); | |
| list_for_each_entry(bank, &priv->bank_list, node) | |
| brcmstb_gpio_irq_bank_handler(bank); | |
| chained_irq_exit(chip, desc); | |
| } | |
| static int brcmstb_gpio_reboot(struct notifier_block *nb, | |
| unsigned long action, void *data) | |
| { | |
| struct brcmstb_gpio_priv *priv = | |
| container_of(nb, struct brcmstb_gpio_priv, reboot_notifier); | |
| /* Enable GPIO for S5 cold boot */ | |
| if (action == SYS_POWER_OFF) | |
| brcmstb_gpio_priv_set_wake(priv, 1); | |
| return NOTIFY_DONE; | |
| } | |
| /* Make sure that the number of banks matches up between properties */ | |
| static int brcmstb_gpio_sanity_check_banks(struct device *dev, | |
| struct device_node *np, struct resource *res) | |
| { | |
| int res_num_banks = resource_size(res) / GIO_BANK_SIZE; | |
| int num_banks = | |
| of_property_count_u32_elems(np, "brcm,gpio-bank-widths"); | |
| if (res_num_banks != num_banks) { | |
| dev_err(dev, "Mismatch in banks: res had %d, bank-widths had %d\n", | |
| res_num_banks, num_banks); | |
| return -EINVAL; | |
| } else { | |
| return 0; | |
| } | |
| } | |
| static int brcmstb_gpio_remove(struct platform_device *pdev) | |
| { | |
| struct brcmstb_gpio_priv *priv = platform_get_drvdata(pdev); | |
| struct brcmstb_gpio_bank *bank; | |
| int ret = 0; | |
| if (!priv) { | |
| dev_err(&pdev->dev, "called %s without drvdata!\n", __func__); | |
| return -EFAULT; | |
| } | |
| /* | |
| * You can lose return values below, but we report all errors, and it's | |
| * more important to actually perform all of the steps. | |
| */ | |
| list_for_each_entry(bank, &priv->bank_list, node) | |
| gpiochip_remove(&bank->gc); | |
| if (priv->reboot_notifier.notifier_call) { | |
| ret = unregister_reboot_notifier(&priv->reboot_notifier); | |
| if (ret) | |
| dev_err(&pdev->dev, | |
| "failed to unregister reboot notifier\n"); | |
| } | |
| return ret; | |
| } | |
| static int brcmstb_gpio_of_xlate(struct gpio_chip *gc, | |
| const struct of_phandle_args *gpiospec, u32 *flags) | |
| { | |
| struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc); | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| int offset; | |
| if (gc->of_gpio_n_cells != 2) { | |
| WARN_ON(1); | |
| return -EINVAL; | |
| } | |
| if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) | |
| return -EINVAL; | |
| offset = gpiospec->args[0] - (gc->base - priv->gpio_base); | |
| if (offset >= gc->ngpio || offset < 0) | |
| return -EINVAL; | |
| if (unlikely(offset >= bank->width)) { | |
| dev_warn_ratelimited(&priv->pdev->dev, | |
| "Received request for invalid GPIO offset %d\n", | |
| gpiospec->args[0]); | |
| } | |
| if (flags) | |
| *flags = gpiospec->args[1]; | |
| return offset; | |
| } | |
| /* Before calling, must have bank->parent_irq set and gpiochip registered */ | |
| static int brcmstb_gpio_irq_setup(struct platform_device *pdev, | |
| struct brcmstb_gpio_bank *bank) | |
| { | |
| struct brcmstb_gpio_priv *priv = bank->parent_priv; | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| bank->irq_chip.name = dev_name(dev); | |
| bank->irq_chip.irq_mask = brcmstb_gpio_irq_mask; | |
| bank->irq_chip.irq_unmask = brcmstb_gpio_irq_unmask; | |
| bank->irq_chip.irq_set_type = brcmstb_gpio_irq_set_type; | |
| /* Ensures that all non-wakeup IRQs are disabled at suspend */ | |
| bank->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND; | |
| if (IS_ENABLED(CONFIG_PM_SLEEP) && !priv->can_wake && | |
| of_property_read_bool(np, "wakeup-source")) { | |
| priv->parent_wake_irq = platform_get_irq(pdev, 1); | |
| if (priv->parent_wake_irq < 0) { | |
| dev_warn(dev, | |
| "Couldn't get wake IRQ - GPIOs will not be able to wake from sleep"); | |
| } else { | |
| int err; | |
| /* | |
| * Set wakeup capability before requesting wakeup | |
| * interrupt, so we can process boot-time "wakeups" | |
| * (e.g., from S5 cold boot) | |
| */ | |
| device_set_wakeup_capable(dev, true); | |
| device_wakeup_enable(dev); | |
| err = devm_request_irq(dev, priv->parent_wake_irq, | |
| brcmstb_gpio_wake_irq_handler, 0, | |
| "brcmstb-gpio-wake", priv); | |
| if (err < 0) { | |
| dev_err(dev, "Couldn't request wake IRQ"); | |
| return err; | |
| } | |
| priv->reboot_notifier.notifier_call = | |
| brcmstb_gpio_reboot; | |
| register_reboot_notifier(&priv->reboot_notifier); | |
| priv->can_wake = true; | |
| } | |
| } | |
| if (priv->can_wake) | |
| bank->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake; | |
| gpiochip_irqchip_add(&bank->gc, &bank->irq_chip, 0, | |
| handle_simple_irq, IRQ_TYPE_NONE); | |
| gpiochip_set_chained_irqchip(&bank->gc, &bank->irq_chip, | |
| priv->parent_irq, brcmstb_gpio_irq_handler); | |
| return 0; | |
| } | |
| static int brcmstb_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| void __iomem *reg_base; | |
| struct brcmstb_gpio_priv *priv; | |
| struct resource *res; | |
| struct property *prop; | |
| const __be32 *p; | |
| u32 bank_width; | |
| int num_banks = 0; | |
| int err; | |
| static int gpio_base; | |
| unsigned long flags = 0; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, priv); | |
| INIT_LIST_HEAD(&priv->bank_list); | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| reg_base = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(reg_base)) | |
| return PTR_ERR(reg_base); | |
| priv->gpio_base = gpio_base; | |
| priv->reg_base = reg_base; | |
| priv->pdev = pdev; | |
| if (of_property_read_bool(np, "interrupt-controller")) { | |
| priv->parent_irq = platform_get_irq(pdev, 0); | |
| if (priv->parent_irq <= 0) { | |
| dev_err(dev, "Couldn't get IRQ"); | |
| return -ENOENT; | |
| } | |
| } else { | |
| priv->parent_irq = -ENOENT; | |
| } | |
| if (brcmstb_gpio_sanity_check_banks(dev, np, res)) | |
| return -EINVAL; | |
| /* | |
| * MIPS endianness is configured by boot strap, which also reverses all | |
| * bus endianness (i.e., big-endian CPU + big endian bus ==> native | |
| * endian I/O). | |
| * | |
| * Other architectures (e.g., ARM) either do not support big endian, or | |
| * else leave I/O in little endian mode. | |
| */ | |
| #if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN) | |
| flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER; | |
| #endif | |
| of_property_for_each_u32(np, "brcm,gpio-bank-widths", prop, p, | |
| bank_width) { | |
| struct brcmstb_gpio_bank *bank; | |
| struct gpio_chip *gc; | |
| bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL); | |
| if (!bank) { | |
| err = -ENOMEM; | |
| goto fail; | |
| } | |
| bank->parent_priv = priv; | |
| bank->id = num_banks; | |
| if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) { | |
| dev_err(dev, "Invalid bank width %d\n", bank_width); | |
| err = -EINVAL; | |
| goto fail; | |
| } else { | |
| bank->width = bank_width; | |
| } | |
| /* | |
| * Regs are 4 bytes wide, have data reg, no set/clear regs, | |
| * and direction bits have 0 = output and 1 = input | |
| */ | |
| gc = &bank->gc; | |
| err = bgpio_init(gc, dev, 4, | |
| reg_base + GIO_DATA(bank->id), | |
| NULL, NULL, NULL, | |
| reg_base + GIO_IODIR(bank->id), flags); | |
| if (err) { | |
| dev_err(dev, "bgpio_init() failed\n"); | |
| goto fail; | |
| } | |
| gc->of_node = np; | |
| gc->owner = THIS_MODULE; | |
| gc->label = np->full_name; | |
| gc->base = gpio_base; | |
| gc->of_gpio_n_cells = 2; | |
| gc->of_xlate = brcmstb_gpio_of_xlate; | |
| /* not all ngpio lines are valid, will use bank width later */ | |
| gc->ngpio = MAX_GPIO_PER_BANK; | |
| /* | |
| * Mask all interrupts by default, since wakeup interrupts may | |
| * be retained from S5 cold boot | |
| */ | |
| gc->write_reg(reg_base + GIO_MASK(bank->id), 0); | |
| err = gpiochip_add_data(gc, bank); | |
| if (err) { | |
| dev_err(dev, "Could not add gpiochip for bank %d\n", | |
| bank->id); | |
| goto fail; | |
| } | |
| gpio_base += gc->ngpio; | |
| if (priv->parent_irq > 0) { | |
| err = brcmstb_gpio_irq_setup(pdev, bank); | |
| if (err) | |
| goto fail; | |
| } | |
| dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id, | |
| gc->base, gc->ngpio, bank->width); | |
| /* Everything looks good, so add bank to list */ | |
| list_add(&bank->node, &priv->bank_list); | |
| num_banks++; | |
| } | |
| dev_info(dev, "Registered %d banks (GPIO(s): %d-%d)\n", | |
| num_banks, priv->gpio_base, gpio_base - 1); | |
| return 0; | |
| fail: | |
| (void) brcmstb_gpio_remove(pdev); | |
| return err; | |
| } | |
| static const struct of_device_id brcmstb_gpio_of_match[] = { | |
| { .compatible = "brcm,brcmstb-gpio" }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, brcmstb_gpio_of_match); | |
| static struct platform_driver brcmstb_gpio_driver = { | |
| .driver = { | |
| .name = "brcmstb-gpio", | |
| .of_match_table = brcmstb_gpio_of_match, | |
| }, | |
| .probe = brcmstb_gpio_probe, | |
| .remove = brcmstb_gpio_remove, | |
| }; | |
| module_platform_driver(brcmstb_gpio_driver); | |
| MODULE_AUTHOR("Gregory Fong"); | |
| MODULE_DESCRIPTION("Driver for Broadcom BRCMSTB SoC UPG GPIO"); | |
| MODULE_LICENSE("GPL v2"); |