drivers/gpio/gpio-bt8xx.c - arm/linux - Git at Google


            
            /*


                bt8xx GPIO abuser


                Copyright (C) 2008 Michael Buesch <m@bues.ch>


                Please do _only_ contact the people listed _above_ with issues related to this driver.

            
                All the other people listed below are not related to this driver. Their names

            
                are only here, because this driver is derived from the bt848 driver.


                Derived from the bt848 driver:


                Copyright (C) 1996,97,98 Ralph  Metzler

            
            			   & Marcus Metzler

            
                (c) 1999-2002 Gerd Knorr


                some v4l2 code lines are taken from Justin's bttv2 driver which is

            
                (c) 2000 Justin Schoeman


                V4L1 removal from:

            
                (c) 2005-2006 Nickolay V. Shmyrev


                Fixes to be fully V4L2 compliant by

            
                (c) 2006 Mauro Carvalho Chehab


                Cropping and overscan support

            
                Copyright (C) 2005, 2006 Michael H. Schimek

            
                Sponsored by OPQ Systems AB


                This program is free software; you can redistribute it and/or modify

            
                it under the terms of the GNU General Public License as published by

            
                the Free Software Foundation; either version 2 of the License, or

            
                (at your option) any later version.


                This program is distributed in the hope that it will be useful,

            
                but WITHOUT ANY WARRANTY; without even the implied warranty of

            
                MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

            
                GNU General Public License for more details.


                You should have received a copy of the GNU General Public License

            
                along with this program; if not, write to the Free Software

            
                Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

            
            */


            #include <linux/module.h>

            
            #include <linux/pci.h>

            
            #include <linux/spinlock.h>

            
            #include <linux/gpio.h>

            
            #include <linux/slab.h>


            /* Steal the hardware definitions from the bttv driver. */

            
            #include "../media/pci/bt8xx/bt848.h"


            #define BT8XXGPIO_NR_GPIOS		24 /* We have 24 GPIO pins */


            struct bt8xxgpio {

            
            	spinlock_t lock;


            	void __iomem *mmio;

            
            	struct pci_dev *pdev;

            
            	struct gpio_chip gpio;


            #ifdef CONFIG_PM

            
            	u32 saved_outen;

            
            	u32 saved_data;

            
            #endif

            
            };


            #define bgwrite(dat, adr)	writel((dat), bg->mmio+(adr))

            
            #define bgread(adr)		readl(bg->mmio+(adr))


            static int modparam_gpiobase = -1/* dynamic */;

            
            module_param_named(gpiobase, modparam_gpiobase, int, 0444);

            
            MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");


            static int bt8xxgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)

            
            {

            
            	struct bt8xxgpio *bg = gpiochip_get_data(gpio);

            
            	unsigned long flags;

            
            	u32 outen, data;


            	spin_lock_irqsave(&bg->lock, flags);


            	data = bgread(BT848_GPIO_DATA);

            
            	data &= ~(1 << nr);

            
            	bgwrite(data, BT848_GPIO_DATA);


            	outen = bgread(BT848_GPIO_OUT_EN);

            
            	outen &= ~(1 << nr);

            
            	bgwrite(outen, BT848_GPIO_OUT_EN);


            	spin_unlock_irqrestore(&bg->lock, flags);


            	return 0;

            
            }


            static int bt8xxgpio_gpio_get(struct gpio_chip *gpio, unsigned nr)

            
            {

            
            	struct bt8xxgpio *bg = gpiochip_get_data(gpio);

            
            	unsigned long flags;

            
            	u32 val;


            	spin_lock_irqsave(&bg->lock, flags);

            
            	val = bgread(BT848_GPIO_DATA);

            
            	spin_unlock_irqrestore(&bg->lock, flags);


            	return !!(val & (1 << nr));

            
            }


            static int bt8xxgpio_gpio_direction_output(struct gpio_chip *gpio,

            
            					unsigned nr, int val)

            
            {

            
            	struct bt8xxgpio *bg = gpiochip_get_data(gpio);

            
            	unsigned long flags;

            
            	u32 outen, data;


            	spin_lock_irqsave(&bg->lock, flags);


            	outen = bgread(BT848_GPIO_OUT_EN);

            
            	outen |= (1 << nr);

            
            	bgwrite(outen, BT848_GPIO_OUT_EN);


            	data = bgread(BT848_GPIO_DATA);

            
            	if (val)

            
            		data |= (1 << nr);

            
            	else

            
            		data &= ~(1 << nr);

            
            	bgwrite(data, BT848_GPIO_DATA);


            	spin_unlock_irqrestore(&bg->lock, flags);


            	return 0;

            
            }


            static void bt8xxgpio_gpio_set(struct gpio_chip *gpio,

            
            			    unsigned nr, int val)

            
            {

            
            	struct bt8xxgpio *bg = gpiochip_get_data(gpio);

            
            	unsigned long flags;

            
            	u32 data;


            	spin_lock_irqsave(&bg->lock, flags);


            	data = bgread(BT848_GPIO_DATA);

            
            	if (val)

            
            		data |= (1 << nr);

            
            	else

            
            		data &= ~(1 << nr);

            
            	bgwrite(data, BT848_GPIO_DATA);


            	spin_unlock_irqrestore(&bg->lock, flags);

            
            }


            static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg)

            
            {

            
            	struct gpio_chip *c = &bg->gpio;


            	c->label = dev_name(&bg->pdev->dev);

            
            	c->owner = THIS_MODULE;

            
            	c->direction_input = bt8xxgpio_gpio_direction_input;

            
            	c->get = bt8xxgpio_gpio_get;

            
            	c->direction_output = bt8xxgpio_gpio_direction_output;

            
            	c->set = bt8xxgpio_gpio_set;

            
            	c->dbg_show = NULL;

            
            	c->base = modparam_gpiobase;

            
            	c->ngpio = BT8XXGPIO_NR_GPIOS;

            
            	c->can_sleep = false;

            
            }


            static int bt8xxgpio_probe(struct pci_dev *dev,

            
            			const struct pci_device_id *pci_id)

            
            {

            
            	struct bt8xxgpio *bg;

            
            	int err;


            	bg = devm_kzalloc(&dev->dev, sizeof(struct bt8xxgpio), GFP_KERNEL);

            
            	if (!bg)

            
            		return -ENOMEM;


            	bg->pdev = dev;

            
            	spin_lock_init(&bg->lock);


            	err = pci_enable_device(dev);

            
            	if (err) {

            
            		printk(KERN_ERR "bt8xxgpio: Can't enable device.\n");

            
            		return err;

            
            	}

            
            	if (!devm_request_mem_region(&dev->dev, pci_resource_start(dev, 0),

            
            				pci_resource_len(dev, 0),

            
            				"bt8xxgpio")) {

            
            		printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n",

            
            		       (unsigned long long)pci_resource_start(dev, 0));

            
            		err = -EBUSY;

            
            		goto err_disable;

            
            	}

            
            	pci_set_master(dev);

            
            	pci_set_drvdata(dev, bg);


            	bg->mmio = devm_ioremap(&dev->dev, pci_resource_start(dev, 0), 0x1000);

            
            	if (!bg->mmio) {

            
            		printk(KERN_ERR "bt8xxgpio: ioremap() failed\n");

            
            		err = -EIO;

            
            		goto err_disable;

            
            	}


            	/* Disable interrupts */

            
            	bgwrite(0, BT848_INT_MASK);


            	/* gpio init */

            
            	bgwrite(0, BT848_GPIO_DMA_CTL);

            
            	bgwrite(0, BT848_GPIO_REG_INP);

            
            	bgwrite(0, BT848_GPIO_OUT_EN);


            	bt8xxgpio_gpio_setup(bg);

            
            	err = gpiochip_add_data(&bg->gpio, bg);

            
            	if (err) {

            
            		printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n");

            
            		goto err_disable;

            
            	}


            	return 0;


            err_disable:

            
            	pci_disable_device(dev);


            	return err;

            
            }


            static void bt8xxgpio_remove(struct pci_dev *pdev)

            
            {

            
            	struct bt8xxgpio *bg = pci_get_drvdata(pdev);


            	gpiochip_remove(&bg->gpio);


            	bgwrite(0, BT848_INT_MASK);

            
            	bgwrite(~0x0, BT848_INT_STAT);

            
            	bgwrite(0x0, BT848_GPIO_OUT_EN);


            	pci_disable_device(pdev);

            
            }


            #ifdef CONFIG_PM

            
            static int bt8xxgpio_suspend(struct pci_dev *pdev, pm_message_t state)

            
            {

            
            	struct bt8xxgpio *bg = pci_get_drvdata(pdev);

            
            	unsigned long flags;


            	spin_lock_irqsave(&bg->lock, flags);


            	bg->saved_outen = bgread(BT848_GPIO_OUT_EN);

            
            	bg->saved_data = bgread(BT848_GPIO_DATA);


            	bgwrite(0, BT848_INT_MASK);

            
            	bgwrite(~0x0, BT848_INT_STAT);

            
            	bgwrite(0x0, BT848_GPIO_OUT_EN);


            	spin_unlock_irqrestore(&bg->lock, flags);


            	pci_save_state(pdev);

            
            	pci_disable_device(pdev);

            
            	pci_set_power_state(pdev, pci_choose_state(pdev, state));


            	return 0;

            
            }


            static int bt8xxgpio_resume(struct pci_dev *pdev)

            
            {

            
            	struct bt8xxgpio *bg = pci_get_drvdata(pdev);

            
            	unsigned long flags;

            
            	int err;


            	pci_set_power_state(pdev, PCI_D0);

            
            	err = pci_enable_device(pdev);

            
            	if (err)

            
            		return err;

            
            	pci_restore_state(pdev);


            	spin_lock_irqsave(&bg->lock, flags);


            	bgwrite(0, BT848_INT_MASK);

            
            	bgwrite(0, BT848_GPIO_DMA_CTL);

            
            	bgwrite(0, BT848_GPIO_REG_INP);

            
            	bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN);

            
            	bgwrite(bg->saved_data & bg->saved_outen,

            
            		BT848_GPIO_DATA);


            	spin_unlock_irqrestore(&bg->lock, flags);


            	return 0;

            
            }

            
            #else

            
            #define bt8xxgpio_suspend NULL

            
            #define bt8xxgpio_resume NULL

            
            #endif /* CONFIG_PM */


            static const struct pci_device_id bt8xxgpio_pci_tbl[] = {

            
            	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },

            
            	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },

            
            	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },

            
            	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) },

            
            	{ 0, },

            
            };

            
            MODULE_DEVICE_TABLE(pci, bt8xxgpio_pci_tbl);


            static struct pci_driver bt8xxgpio_pci_driver = {

            
            	.name		= "bt8xxgpio",

            
            	.id_table	= bt8xxgpio_pci_tbl,

            
            	.probe		= bt8xxgpio_probe,

            
            	.remove		= bt8xxgpio_remove,

            
            	.suspend	= bt8xxgpio_suspend,

            
            	.resume		= bt8xxgpio_resume,

            
            };


            module_pci_driver(bt8xxgpio_pci_driver);


            MODULE_LICENSE("GPL");

            
            MODULE_AUTHOR("Michael Buesch");

            
            MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card");
	/*

	bt8xx GPIO abuser

	Copyright (C) 2008 Michael Buesch <m@bues.ch>

	Please do _only_ contact the people listed _above_ with issues related to this driver.
	All the other people listed below are not related to this driver. Their names
	are only here, because this driver is derived from the bt848 driver.


	Derived from the bt848 driver:

	Copyright (C) 1996,97,98 Ralph Metzler
	& Marcus Metzler
	(c) 1999-2002 Gerd Knorr

	some v4l2 code lines are taken from Justin's bttv2 driver which is
	(c) 2000 Justin Schoeman

	V4L1 removal from:
	(c) 2005-2006 Nickolay V. Shmyrev

	Fixes to be fully V4L2 compliant by
	(c) 2006 Mauro Carvalho Chehab

	Cropping and overscan support
	Copyright (C) 2005, 2006 Michael H. Schimek
	Sponsored by OPQ Systems AB

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the Free Software
	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#include <linux/module.h>
	#include <linux/pci.h>
	#include <linux/spinlock.h>
	#include <linux/gpio.h>
	#include <linux/slab.h>

	/* Steal the hardware definitions from the bttv driver. */
	#include "../media/pci/bt8xx/bt848.h"


	#define BT8XXGPIO_NR_GPIOS 24 /* We have 24 GPIO pins */


	struct bt8xxgpio {
	spinlock_t lock;

	void __iomem *mmio;
	struct pci_dev *pdev;
	struct gpio_chip gpio;

	#ifdef CONFIG_PM
	u32 saved_outen;
	u32 saved_data;
	#endif
	};

	#define bgwrite(dat, adr) writel((dat), bg->mmio+(adr))
	#define bgread(adr) readl(bg->mmio+(adr))


	static int modparam_gpiobase = -1/* dynamic */;
	module_param_named(gpiobase, modparam_gpiobase, int, 0444);
	MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");


	static int bt8xxgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
	{
	struct bt8xxgpio *bg = gpiochip_get_data(gpio);
	unsigned long flags;
	u32 outen, data;

	spin_lock_irqsave(&bg->lock, flags);

	data = bgread(BT848_GPIO_DATA);
	data &= ~(1 << nr);
	bgwrite(data, BT848_GPIO_DATA);

	outen = bgread(BT848_GPIO_OUT_EN);
	outen &= ~(1 << nr);
	bgwrite(outen, BT848_GPIO_OUT_EN);

	spin_unlock_irqrestore(&bg->lock, flags);

	return 0;
	}

	static int bt8xxgpio_gpio_get(struct gpio_chip *gpio, unsigned nr)
	{
	struct bt8xxgpio *bg = gpiochip_get_data(gpio);
	unsigned long flags;
	u32 val;

	spin_lock_irqsave(&bg->lock, flags);
	val = bgread(BT848_GPIO_DATA);
	spin_unlock_irqrestore(&bg->lock, flags);

	return !!(val & (1 << nr));
	}

	static int bt8xxgpio_gpio_direction_output(struct gpio_chip *gpio,
	unsigned nr, int val)
	{
	struct bt8xxgpio *bg = gpiochip_get_data(gpio);
	unsigned long flags;
	u32 outen, data;

	spin_lock_irqsave(&bg->lock, flags);

	outen = bgread(BT848_GPIO_OUT_EN);
	outen \|= (1 << nr);
	bgwrite(outen, BT848_GPIO_OUT_EN);

	data = bgread(BT848_GPIO_DATA);
	if (val)
	data \|= (1 << nr);
	else
	data &= ~(1 << nr);
	bgwrite(data, BT848_GPIO_DATA);

	spin_unlock_irqrestore(&bg->lock, flags);

	return 0;
	}

	static void bt8xxgpio_gpio_set(struct gpio_chip *gpio,
	unsigned nr, int val)
	{
	struct bt8xxgpio *bg = gpiochip_get_data(gpio);
	unsigned long flags;
	u32 data;

	spin_lock_irqsave(&bg->lock, flags);

	data = bgread(BT848_GPIO_DATA);
	if (val)
	data \|= (1 << nr);
	else
	data &= ~(1 << nr);
	bgwrite(data, BT848_GPIO_DATA);

	spin_unlock_irqrestore(&bg->lock, flags);
	}

	static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg)
	{
	struct gpio_chip *c = &bg->gpio;

	c->label = dev_name(&bg->pdev->dev);
	c->owner = THIS_MODULE;
	c->direction_input = bt8xxgpio_gpio_direction_input;
	c->get = bt8xxgpio_gpio_get;
	c->direction_output = bt8xxgpio_gpio_direction_output;
	c->set = bt8xxgpio_gpio_set;
	c->dbg_show = NULL;
	c->base = modparam_gpiobase;
	c->ngpio = BT8XXGPIO_NR_GPIOS;
	c->can_sleep = false;
	}

	static int bt8xxgpio_probe(struct pci_dev *dev,
	const struct pci_device_id *pci_id)
	{
	struct bt8xxgpio *bg;
	int err;

	bg = devm_kzalloc(&dev->dev, sizeof(struct bt8xxgpio), GFP_KERNEL);
	if (!bg)
	return -ENOMEM;

	bg->pdev = dev;
	spin_lock_init(&bg->lock);

	err = pci_enable_device(dev);
	if (err) {
	printk(KERN_ERR "bt8xxgpio: Can't enable device.\n");
	return err;
	}
	if (!devm_request_mem_region(&dev->dev, pci_resource_start(dev, 0),
	pci_resource_len(dev, 0),
	"bt8xxgpio")) {
	printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n",
	(unsigned long long)pci_resource_start(dev, 0));
	err = -EBUSY;
	goto err_disable;
	}
	pci_set_master(dev);
	pci_set_drvdata(dev, bg);

	bg->mmio = devm_ioremap(&dev->dev, pci_resource_start(dev, 0), 0x1000);
	if (!bg->mmio) {
	printk(KERN_ERR "bt8xxgpio: ioremap() failed\n");
	err = -EIO;
	goto err_disable;
	}

	/* Disable interrupts */
	bgwrite(0, BT848_INT_MASK);

	/* gpio init */
	bgwrite(0, BT848_GPIO_DMA_CTL);
	bgwrite(0, BT848_GPIO_REG_INP);
	bgwrite(0, BT848_GPIO_OUT_EN);

	bt8xxgpio_gpio_setup(bg);
	err = gpiochip_add_data(&bg->gpio, bg);
	if (err) {
	printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n");
	goto err_disable;
	}

	return 0;

	err_disable:
	pci_disable_device(dev);

	return err;
	}

	static void bt8xxgpio_remove(struct pci_dev *pdev)
	{
	struct bt8xxgpio *bg = pci_get_drvdata(pdev);

	gpiochip_remove(&bg->gpio);

	bgwrite(0, BT848_INT_MASK);
	bgwrite(~0x0, BT848_INT_STAT);
	bgwrite(0x0, BT848_GPIO_OUT_EN);

	pci_disable_device(pdev);
	}

	#ifdef CONFIG_PM
	static int bt8xxgpio_suspend(struct pci_dev *pdev, pm_message_t state)
	{
	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
	unsigned long flags;

	spin_lock_irqsave(&bg->lock, flags);

	bg->saved_outen = bgread(BT848_GPIO_OUT_EN);
	bg->saved_data = bgread(BT848_GPIO_DATA);

	bgwrite(0, BT848_INT_MASK);
	bgwrite(~0x0, BT848_INT_STAT);
	bgwrite(0x0, BT848_GPIO_OUT_EN);

	spin_unlock_irqrestore(&bg->lock, flags);

	pci_save_state(pdev);
	pci_disable_device(pdev);
	pci_set_power_state(pdev, pci_choose_state(pdev, state));

	return 0;
	}

	static int bt8xxgpio_resume(struct pci_dev *pdev)
	{
	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
	unsigned long flags;
	int err;

	pci_set_power_state(pdev, PCI_D0);
	err = pci_enable_device(pdev);
	if (err)
	return err;
	pci_restore_state(pdev);

	spin_lock_irqsave(&bg->lock, flags);

	bgwrite(0, BT848_INT_MASK);
	bgwrite(0, BT848_GPIO_DMA_CTL);
	bgwrite(0, BT848_GPIO_REG_INP);
	bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN);
	bgwrite(bg->saved_data & bg->saved_outen,
	BT848_GPIO_DATA);

	spin_unlock_irqrestore(&bg->lock, flags);

	return 0;
	}
	#else
	#define bt8xxgpio_suspend NULL
	#define bt8xxgpio_resume NULL
	#endif /* CONFIG_PM */

	static const struct pci_device_id bt8xxgpio_pci_tbl[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },
	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },
	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },
	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) },
	{ 0, },
	};
	MODULE_DEVICE_TABLE(pci, bt8xxgpio_pci_tbl);

	static struct pci_driver bt8xxgpio_pci_driver = {
	.name = "bt8xxgpio",
	.id_table = bt8xxgpio_pci_tbl,
	.probe = bt8xxgpio_probe,
	.remove = bt8xxgpio_remove,
	.suspend = bt8xxgpio_suspend,
	.resume = bt8xxgpio_resume,
	};

	module_pci_driver(bt8xxgpio_pci_driver);

	MODULE_LICENSE("GPL");
	MODULE_AUTHOR("Michael Buesch");
	MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card");