| /* | |
| * GPIO interface for IT87xx Super I/O chips | |
| * | |
| * Author: Diego Elio Pettenò <flameeyes@flameeyes.eu> | |
| * | |
| * Based on it87_wdt.c by Oliver Schuster | |
| * gpio-it8761e.c by Denis Turischev | |
| * gpio-stmpe.c by Rabin Vincent | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License 2 as published | |
| * by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; see the file COPYING. If not, write to | |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/io.h> | |
| #include <linux/errno.h> | |
| #include <linux/ioport.h> | |
| #include <linux/slab.h> | |
| #include <linux/gpio.h> | |
| /* Chip Id numbers */ | |
| #define NO_DEV_ID 0xffff | |
| #define IT8620_ID 0x8620 | |
| #define IT8628_ID 0x8628 | |
| #define IT8728_ID 0x8728 | |
| #define IT8732_ID 0x8732 | |
| #define IT8761_ID 0x8761 | |
| /* IO Ports */ | |
| #define REG 0x2e | |
| #define VAL 0x2f | |
| /* Logical device Numbers LDN */ | |
| #define GPIO 0x07 | |
| /* Configuration Registers and Functions */ | |
| #define LDNREG 0x07 | |
| #define CHIPID 0x20 | |
| #define CHIPREV 0x22 | |
| /** | |
| * struct it87_gpio - it87-specific GPIO chip | |
| * @chip the underlying gpio_chip structure | |
| * @lock a lock to avoid races between operations | |
| * @io_base base address for gpio ports | |
| * @io_size size of the port rage starting from io_base. | |
| * @output_base Super I/O register address for Output Enable register | |
| * @simple_base Super I/O 'Simple I/O' Enable register | |
| * @simple_size Super IO 'Simple I/O' Enable register size; this is | |
| * required because IT87xx chips might only provide Simple I/O | |
| * switches on a subset of lines, whereas the others keep the | |
| * same status all time. | |
| */ | |
| struct it87_gpio { | |
| struct gpio_chip chip; | |
| spinlock_t lock; | |
| u16 io_base; | |
| u16 io_size; | |
| u8 output_base; | |
| u8 simple_base; | |
| u8 simple_size; | |
| }; | |
| static struct it87_gpio it87_gpio_chip = { | |
| .lock = __SPIN_LOCK_UNLOCKED(it87_gpio_chip.lock), | |
| }; | |
| /* Superio chip access functions; copied from wdt_it87 */ | |
| static inline int superio_enter(void) | |
| { | |
| /* | |
| * Try to reserve REG and REG + 1 for exclusive access. | |
| */ | |
| if (!request_muxed_region(REG, 2, KBUILD_MODNAME)) | |
| return -EBUSY; | |
| outb(0x87, REG); | |
| outb(0x01, REG); | |
| outb(0x55, REG); | |
| outb(0x55, REG); | |
| return 0; | |
| } | |
| static inline void superio_exit(void) | |
| { | |
| outb(0x02, REG); | |
| outb(0x02, VAL); | |
| release_region(REG, 2); | |
| } | |
| static inline void superio_select(int ldn) | |
| { | |
| outb(LDNREG, REG); | |
| outb(ldn, VAL); | |
| } | |
| static inline int superio_inb(int reg) | |
| { | |
| outb(reg, REG); | |
| return inb(VAL); | |
| } | |
| static inline void superio_outb(int val, int reg) | |
| { | |
| outb(reg, REG); | |
| outb(val, VAL); | |
| } | |
| static inline int superio_inw(int reg) | |
| { | |
| int val; | |
| outb(reg++, REG); | |
| val = inb(VAL) << 8; | |
| outb(reg, REG); | |
| val |= inb(VAL); | |
| return val; | |
| } | |
| static inline void superio_outw(int val, int reg) | |
| { | |
| outb(reg++, REG); | |
| outb(val >> 8, VAL); | |
| outb(reg, REG); | |
| outb(val, VAL); | |
| } | |
| static inline void superio_set_mask(int mask, int reg) | |
| { | |
| u8 curr_val = superio_inb(reg); | |
| u8 new_val = curr_val | mask; | |
| if (curr_val != new_val) | |
| superio_outb(new_val, reg); | |
| } | |
| static inline void superio_clear_mask(int mask, int reg) | |
| { | |
| u8 curr_val = superio_inb(reg); | |
| u8 new_val = curr_val & ~mask; | |
| if (curr_val != new_val) | |
| superio_outb(new_val, reg); | |
| } | |
| static int it87_gpio_request(struct gpio_chip *chip, unsigned gpio_num) | |
| { | |
| u8 mask, group; | |
| int rc = 0; | |
| struct it87_gpio *it87_gpio = gpiochip_get_data(chip); | |
| mask = 1 << (gpio_num % 8); | |
| group = (gpio_num / 8); | |
| spin_lock(&it87_gpio->lock); | |
| rc = superio_enter(); | |
| if (rc) | |
| goto exit; | |
| /* not all the IT87xx chips support Simple I/O and not all of | |
| * them allow all the lines to be set/unset to Simple I/O. | |
| */ | |
| if (group < it87_gpio->simple_size) | |
| superio_set_mask(mask, group + it87_gpio->simple_base); | |
| /* clear output enable, setting the pin to input, as all the | |
| * newly-exported GPIO interfaces are set to input. | |
| */ | |
| superio_clear_mask(mask, group + it87_gpio->output_base); | |
| superio_exit(); | |
| exit: | |
| spin_unlock(&it87_gpio->lock); | |
| return rc; | |
| } | |
| static int it87_gpio_get(struct gpio_chip *chip, unsigned gpio_num) | |
| { | |
| u16 reg; | |
| u8 mask; | |
| struct it87_gpio *it87_gpio = gpiochip_get_data(chip); | |
| mask = 1 << (gpio_num % 8); | |
| reg = (gpio_num / 8) + it87_gpio->io_base; | |
| return !!(inb(reg) & mask); | |
| } | |
| static int it87_gpio_direction_in(struct gpio_chip *chip, unsigned gpio_num) | |
| { | |
| u8 mask, group; | |
| int rc = 0; | |
| struct it87_gpio *it87_gpio = gpiochip_get_data(chip); | |
| mask = 1 << (gpio_num % 8); | |
| group = (gpio_num / 8); | |
| spin_lock(&it87_gpio->lock); | |
| rc = superio_enter(); | |
| if (rc) | |
| goto exit; | |
| /* clear the output enable bit */ | |
| superio_clear_mask(mask, group + it87_gpio->output_base); | |
| superio_exit(); | |
| exit: | |
| spin_unlock(&it87_gpio->lock); | |
| return rc; | |
| } | |
| static void it87_gpio_set(struct gpio_chip *chip, | |
| unsigned gpio_num, int val) | |
| { | |
| u8 mask, curr_vals; | |
| u16 reg; | |
| struct it87_gpio *it87_gpio = gpiochip_get_data(chip); | |
| mask = 1 << (gpio_num % 8); | |
| reg = (gpio_num / 8) + it87_gpio->io_base; | |
| curr_vals = inb(reg); | |
| if (val) | |
| outb(curr_vals | mask, reg); | |
| else | |
| outb(curr_vals & ~mask, reg); | |
| } | |
| static int it87_gpio_direction_out(struct gpio_chip *chip, | |
| unsigned gpio_num, int val) | |
| { | |
| u8 mask, group; | |
| int rc = 0; | |
| struct it87_gpio *it87_gpio = gpiochip_get_data(chip); | |
| mask = 1 << (gpio_num % 8); | |
| group = (gpio_num / 8); | |
| spin_lock(&it87_gpio->lock); | |
| rc = superio_enter(); | |
| if (rc) | |
| goto exit; | |
| /* set the output enable bit */ | |
| superio_set_mask(mask, group + it87_gpio->output_base); | |
| it87_gpio_set(chip, gpio_num, val); | |
| superio_exit(); | |
| exit: | |
| spin_unlock(&it87_gpio->lock); | |
| return rc; | |
| } | |
| static const struct gpio_chip it87_template_chip = { | |
| .label = KBUILD_MODNAME, | |
| .owner = THIS_MODULE, | |
| .request = it87_gpio_request, | |
| .get = it87_gpio_get, | |
| .direction_input = it87_gpio_direction_in, | |
| .set = it87_gpio_set, | |
| .direction_output = it87_gpio_direction_out, | |
| .base = -1 | |
| }; | |
| static int __init it87_gpio_init(void) | |
| { | |
| int rc = 0, i; | |
| u16 chip_type; | |
| u8 chip_rev, gpio_ba_reg; | |
| char *labels, **labels_table; | |
| struct it87_gpio *it87_gpio = &it87_gpio_chip; | |
| rc = superio_enter(); | |
| if (rc) | |
| return rc; | |
| chip_type = superio_inw(CHIPID); | |
| chip_rev = superio_inb(CHIPREV) & 0x0f; | |
| superio_exit(); | |
| it87_gpio->chip = it87_template_chip; | |
| switch (chip_type) { | |
| case IT8620_ID: | |
| case IT8628_ID: | |
| gpio_ba_reg = 0x62; | |
| it87_gpio->io_size = 11; | |
| it87_gpio->output_base = 0xc8; | |
| it87_gpio->simple_size = 0; | |
| it87_gpio->chip.ngpio = 64; | |
| break; | |
| case IT8728_ID: | |
| case IT8732_ID: | |
| gpio_ba_reg = 0x62; | |
| it87_gpio->io_size = 8; | |
| it87_gpio->output_base = 0xc8; | |
| it87_gpio->simple_base = 0xc0; | |
| it87_gpio->simple_size = 5; | |
| it87_gpio->chip.ngpio = 64; | |
| break; | |
| case IT8761_ID: | |
| gpio_ba_reg = 0x60; | |
| it87_gpio->io_size = 4; | |
| it87_gpio->output_base = 0xf0; | |
| it87_gpio->simple_size = 0; | |
| it87_gpio->chip.ngpio = 16; | |
| break; | |
| case NO_DEV_ID: | |
| pr_err("no device\n"); | |
| return -ENODEV; | |
| default: | |
| pr_err("Unknown Chip found, Chip %04x Revision %x\n", | |
| chip_type, chip_rev); | |
| return -ENODEV; | |
| } | |
| rc = superio_enter(); | |
| if (rc) | |
| return rc; | |
| superio_select(GPIO); | |
| /* fetch GPIO base address */ | |
| it87_gpio->io_base = superio_inw(gpio_ba_reg); | |
| superio_exit(); | |
| pr_info("Found Chip IT%04x rev %x. %u GPIO lines starting at %04xh\n", | |
| chip_type, chip_rev, it87_gpio->chip.ngpio, | |
| it87_gpio->io_base); | |
| if (!request_region(it87_gpio->io_base, it87_gpio->io_size, | |
| KBUILD_MODNAME)) | |
| return -EBUSY; | |
| /* Set up aliases for the GPIO connection. | |
| * | |
| * ITE documentation for recent chips such as the IT8728F | |
| * refers to the GPIO lines as GPxy, with a coordinates system | |
| * where x is the GPIO group (starting from 1) and y is the | |
| * bit within the group. | |
| * | |
| * By creating these aliases, we make it easier to understand | |
| * to which GPIO pin we're referring to. | |
| */ | |
| labels = kcalloc(it87_gpio->chip.ngpio, sizeof("it87_gpXY"), | |
| GFP_KERNEL); | |
| labels_table = kcalloc(it87_gpio->chip.ngpio, sizeof(const char *), | |
| GFP_KERNEL); | |
| if (!labels || !labels_table) { | |
| rc = -ENOMEM; | |
| goto labels_free; | |
| } | |
| for (i = 0; i < it87_gpio->chip.ngpio; i++) { | |
| char *label = &labels[i * sizeof("it87_gpXY")]; | |
| sprintf(label, "it87_gp%u%u", 1+(i/8), i%8); | |
| labels_table[i] = label; | |
| } | |
| it87_gpio->chip.names = (const char *const*)labels_table; | |
| rc = gpiochip_add_data(&it87_gpio->chip, it87_gpio); | |
| if (rc) | |
| goto labels_free; | |
| return 0; | |
| labels_free: | |
| kfree(labels_table); | |
| kfree(labels); | |
| release_region(it87_gpio->io_base, it87_gpio->io_size); | |
| return rc; | |
| } | |
| static void __exit it87_gpio_exit(void) | |
| { | |
| struct it87_gpio *it87_gpio = &it87_gpio_chip; | |
| gpiochip_remove(&it87_gpio->chip); | |
| release_region(it87_gpio->io_base, it87_gpio->io_size); | |
| kfree(it87_gpio->chip.names[0]); | |
| kfree(it87_gpio->chip.names); | |
| } | |
| module_init(it87_gpio_init); | |
| module_exit(it87_gpio_exit); | |
| MODULE_AUTHOR("Diego Elio Pettenò <flameeyes@flameeyes.eu>"); | |
| MODULE_DESCRIPTION("GPIO interface for IT87xx Super I/O chips"); | |
| MODULE_LICENSE("GPL"); |