| /* | |
| * Kontron PLD GPIO driver | |
| * | |
| * Copyright (c) 2010-2013 Kontron Europe GmbH | |
| * Author: Michael Brunner <michael.brunner@kontron.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License 2 as published | |
| * by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/bitops.h> | |
| #include <linux/errno.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/gpio.h> | |
| #include <linux/mfd/kempld.h> | |
| #define KEMPLD_GPIO_MAX_NUM 16 | |
| #define KEMPLD_GPIO_MASK(x) (BIT((x) % 8)) | |
| #define KEMPLD_GPIO_DIR_NUM(x) (0x40 + (x) / 8) | |
| #define KEMPLD_GPIO_LVL_NUM(x) (0x42 + (x) / 8) | |
| #define KEMPLD_GPIO_EVT_LVL_EDGE 0x46 | |
| #define KEMPLD_GPIO_IEN 0x4A | |
| struct kempld_gpio_data { | |
| struct gpio_chip chip; | |
| struct kempld_device_data *pld; | |
| }; | |
| /* | |
| * Set or clear GPIO bit | |
| * kempld_get_mutex must be called prior to calling this function. | |
| */ | |
| static void kempld_gpio_bitop(struct kempld_device_data *pld, | |
| u8 reg, u8 bit, u8 val) | |
| { | |
| u8 status; | |
| status = kempld_read8(pld, reg); | |
| if (val) | |
| status |= KEMPLD_GPIO_MASK(bit); | |
| else | |
| status &= ~KEMPLD_GPIO_MASK(bit); | |
| kempld_write8(pld, reg, status); | |
| } | |
| static int kempld_gpio_get_bit(struct kempld_device_data *pld, u8 reg, u8 bit) | |
| { | |
| u8 status; | |
| kempld_get_mutex(pld); | |
| status = kempld_read8(pld, reg); | |
| kempld_release_mutex(pld); | |
| return !!(status & KEMPLD_GPIO_MASK(bit)); | |
| } | |
| static int kempld_gpio_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct kempld_gpio_data *gpio = gpiochip_get_data(chip); | |
| struct kempld_device_data *pld = gpio->pld; | |
| return !!kempld_gpio_get_bit(pld, KEMPLD_GPIO_LVL_NUM(offset), offset); | |
| } | |
| static void kempld_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| struct kempld_gpio_data *gpio = gpiochip_get_data(chip); | |
| struct kempld_device_data *pld = gpio->pld; | |
| kempld_get_mutex(pld); | |
| kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value); | |
| kempld_release_mutex(pld); | |
| } | |
| static int kempld_gpio_direction_input(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct kempld_gpio_data *gpio = gpiochip_get_data(chip); | |
| struct kempld_device_data *pld = gpio->pld; | |
| kempld_get_mutex(pld); | |
| kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 0); | |
| kempld_release_mutex(pld); | |
| return 0; | |
| } | |
| static int kempld_gpio_direction_output(struct gpio_chip *chip, unsigned offset, | |
| int value) | |
| { | |
| struct kempld_gpio_data *gpio = gpiochip_get_data(chip); | |
| struct kempld_device_data *pld = gpio->pld; | |
| kempld_get_mutex(pld); | |
| kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value); | |
| kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 1); | |
| kempld_release_mutex(pld); | |
| return 0; | |
| } | |
| static int kempld_gpio_get_direction(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct kempld_gpio_data *gpio = gpiochip_get_data(chip); | |
| struct kempld_device_data *pld = gpio->pld; | |
| return !kempld_gpio_get_bit(pld, KEMPLD_GPIO_DIR_NUM(offset), offset); | |
| } | |
| static int kempld_gpio_pincount(struct kempld_device_data *pld) | |
| { | |
| u16 evt, evt_back; | |
| kempld_get_mutex(pld); | |
| /* Backup event register as it might be already initialized */ | |
| evt_back = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE); | |
| /* Clear event register */ | |
| kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, 0x0000); | |
| /* Read back event register */ | |
| evt = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE); | |
| /* Restore event register */ | |
| kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, evt_back); | |
| kempld_release_mutex(pld); | |
| return evt ? __ffs(evt) : 16; | |
| } | |
| static int kempld_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct kempld_device_data *pld = dev_get_drvdata(dev->parent); | |
| struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); | |
| struct kempld_gpio_data *gpio; | |
| struct gpio_chip *chip; | |
| int ret; | |
| if (pld->info.spec_major < 2) { | |
| dev_err(dev, | |
| "Driver only supports GPIO devices compatible to PLD spec. rev. 2.0 or higher\n"); | |
| return -ENODEV; | |
| } | |
| gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL); | |
| if (!gpio) | |
| return -ENOMEM; | |
| gpio->pld = pld; | |
| platform_set_drvdata(pdev, gpio); | |
| chip = &gpio->chip; | |
| chip->label = "gpio-kempld"; | |
| chip->owner = THIS_MODULE; | |
| chip->parent = dev; | |
| chip->can_sleep = true; | |
| if (pdata && pdata->gpio_base) | |
| chip->base = pdata->gpio_base; | |
| else | |
| chip->base = -1; | |
| chip->direction_input = kempld_gpio_direction_input; | |
| chip->direction_output = kempld_gpio_direction_output; | |
| chip->get_direction = kempld_gpio_get_direction; | |
| chip->get = kempld_gpio_get; | |
| chip->set = kempld_gpio_set; | |
| chip->ngpio = kempld_gpio_pincount(pld); | |
| if (chip->ngpio == 0) { | |
| dev_err(dev, "No GPIO pins detected\n"); | |
| return -ENODEV; | |
| } | |
| ret = devm_gpiochip_add_data(dev, chip, gpio); | |
| if (ret) { | |
| dev_err(dev, "Could not register GPIO chip\n"); | |
| return ret; | |
| } | |
| dev_info(dev, "GPIO functionality initialized with %d pins\n", | |
| chip->ngpio); | |
| return 0; | |
| } | |
| static struct platform_driver kempld_gpio_driver = { | |
| .driver = { | |
| .name = "kempld-gpio", | |
| }, | |
| .probe = kempld_gpio_probe, | |
| }; | |
| module_platform_driver(kempld_gpio_driver); | |
| MODULE_DESCRIPTION("KEM PLD GPIO Driver"); | |
| MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:kempld-gpio"); |